Assessment of the flexural strength of two heat-curing acrylic resins for artificial eyes
Braz. oral res
; 23(3): 263-267, 2009. graf, tab
Article
em En
| LILACS
| ID: lil-530262
Biblioteca responsável:
BR1.1
ABSTRACT
Prosthetic eyes are artificial substitutes for the eyeball, made of heat-curing acrylic resin, serving to improve the esthetic appearance of the mutilated patient and his/her inclusion in society. The aim of this study was to assess the flexural strength of two heat-curing acrylic resins used for manufacturing prosthetic eyes. Thirty-six specimens measuring 64 x 10 x 3.3 mm were obtained and divided into four groups acrylic resin for artificial sclera N1 (Artigos Odontológicos Clássico, São Paulo, SP, Brazil), heat-cure water technique (GI) and microwave-cured (GII); colorless acrylic resin for prosthetic eyes (Artigos Odontológicos Clássico, São Paulo, SP, Brazil), heat-cure water technique (GIII) and microwave-cured (GIV). Mechanical tests using three point loads were performed in a test machine (EMIC, São José dos Pinhais, PR, Brazil). The analysis of variance and the Tukey test were used to identify significant differences (p < 0.01). Groups GII and GIV presented, respectively, the highest (98.70 ± 11.90 MPa) and lowest means (71.07 ± 8.93 MPa), with a statistically significant difference. The cure method used for the prosthetic eye resins did not interfere in their flexural strength. It was concluded that all the resins assessed presented sufficient flexural strength values to be recommended for the manufacture of prosthetic eyes.
Palavras-chave
Texto completo:
1
Coleções:
01-internacional
Base de dados:
LILACS
Assunto principal:
Resinas Acrílicas
/
Teste de Materiais
/
Olho Artificial
/
Fenômenos Mecânicos
Idioma:
En
Revista:
Braz. oral res
Assunto da revista:
ODONTOLOGIA
Ano de publicação:
2009
Tipo de documento:
Article
País de afiliação:
Brasil
País de publicação:
Brasil