Surface treatment and adhesion approaches on polymer-infiltrated ceramic network: influence on the bond strength to resin cement
Braz. j. oral sci
; 20: e211670, jan.-dez. 2021. ilus
Article
em En
| BBO, LILACS
| ID: biblio-1254259
Biblioteca responsável:
BR218.1
ABSTRACT
Aim:
To evaluate the effect of different surface treatments and adhesive approaches on the microshear bond strength of resin cement to a polymer-infiltrated ceramic network (PICN).Methods:
PICN blocks were randomly assigned into 9 groups (n=10) CTRL no treatment; HF 5% hydrofluoric acid etching; HF-S HF + silane; HF-S-A HF-S + adhesive (Adper Single Bond 2); HF-UA HF + universal adhesive (Single Bond Universal); SB sandblasting with 50 µm Al2O3 particles; SB-S SB + silane; SB-S-A SB-S + adhesive; SB-UA SB + universal adhesive. Resin cement microcylinders (Ø = 0.96 mm; height = 1 mm) (RelyX Ultimate) were built upon the PICN surface after roughness and contact angle measurements. Next, microshear bonding tests (µSBS) were performed (0.5 mm/min) after water storage (37ºC, 90 days) and thermocycling (12,000 cycles; 5ºC-55ºC). Failure modes were observed under stereomicroscope. Bond strength data were analyzed by two-way ANOVA/Tukey's test and t-tests. Kruskal-Wallis/Dunn's tests were conducted for roughness and contact angle data (α = 0.05).Results:
A rougher surface and lower contact angles were observed for Sandblasting. HF-S (18.54 ± 2.03 MPa), SB-S (19.00 ± 1.66 MPa) and SB-UA (18.07 ± 2.36 MPa) provided the highest bond strength values, followed by the other treated groups. The CTRL group resulted in lower bond strength (7.18 ± 2.34 MPa).Conclusion:
Hydrofluoric acid etching followed by silane application and sandblasting followed by silane or universal adhesive are useful clinical steps to enhance bonding to PICN. Adhesive applications after HF etching have no advantages in bonding to PICNPalavras-chave
Texto completo:
1
Coleções:
01-internacional
Base de dados:
BBO
/
LILACS
Assunto principal:
Propriedades de Superfície
/
Cerâmica
/
Adesivos Dentinários
/
Cimentos de Resina
/
Abrasão Dental por Ar
/
Ácido Fluorídrico
Idioma:
En
Revista:
Braz. j. oral sci
Assunto da revista:
ODONTOLOGIA
Ano de publicação:
2021
Tipo de documento:
Article
País de afiliação:
Brasil
País de publicação:
Brasil