Mathematical Modeling of Thin-Layer Drying Kinetics of Tomato Peels: Influence of Drying Temperature on the Energy Requirements and Extracts Quality.
Foods
; 12(20)2023 Oct 23.
Article
en En
| MEDLINE
| ID: mdl-37893776
Tomato drying implies high energy consumption due to the high moisture content, and limiting drying temperatures is necessary to avoid carotenoid degradation. To explain the mechanism of moisture transport through the material and to scale up the drying process, drying experiments are needed and supported by mathematical modeling. For the Rila tomato peel drying process, ten thin-layer mathematical models were formulated based on experimental data for six temperatures (50-75 °C) and validated by statistical analysis. Considering the slab geometry of the peels sample and Fick's second law of diffusion model, the calculated effective moisture diffusivity coefficient values Deff varied between 1.01 × 10-9-1.53 × 10-9 m2/s with R2 higher than 0.9432. From the semi-theoretical models, Two-term presents the best prediction of moisture ratio with the highest R2 and lowest χ2 and RMSE values. Using the experimental data on extract quality (carotenoid content), two degradation models were formulated. Increasing the drying temperature from 50 °C to 110 °C, a degradation of 94% for lycopene and 83% for ß-carotene were predicted. From the energy analysis, a specific energy consumption of 56.60 ± 0.51 kWh is necessary for hot-air drying of 1 kg of Rila tomato peel at 50 °C to avoid carotenoid degradation.
Texto completo:
1
Colección:
01-internacional
Base de datos:
MEDLINE
Idioma:
En
Revista:
Foods
Año:
2023
Tipo del documento:
Article
País de afiliación:
Rumanía
Pais de publicación:
Suiza