Your browser doesn't support javascript.
loading
Physical and Chemical Effects in Blended Cement Pastes Elaborated with Calcined Clay and Nanosilica.
Pinheiro, Divino Gabriel Lima; Sousa, Matheus Ian Castro; Pelisser, Fernando; da Silva Rêgo, João Henrique; Moragues Terrades, Amparo; Frías Rojas, Moisés.
Afiliación
  • Pinheiro DGL; Department of Civil and Environmental Engineering, University of Brasília (UnB), Brasília 70910-900, Brazil.
  • Sousa MIC; Department of Civil and Environmental Engineering, University of Brasília (UnB), Brasília 70910-900, Brazil.
  • Pelisser F; Department of Civil Engineering, Laboratory of Application of Nanotechnology in Civil Construction (LabNANOTEC), Federal University of Santa Catarina (UFSC), Florianópolis 88040-900, Brazil.
  • da Silva Rêgo JH; Department of Civil and Environmental Engineering, University of Brasília (UnB), Brasília 70910-900, Brazil.
  • Moragues Terrades A; Department of Civil Engineering: Construction, Polytechnic University of Madri, Calle del Prof. Araguren, 3, 28040 Madrid, Spain.
  • Frías Rojas M; Eduardo Torroja Institute (CSIC), Spanish National Research Council, 28033 Madrid, Spain.
Materials (Basel) ; 16(5)2023 Feb 23.
Article en En | MEDLINE | ID: mdl-36902953
Supplementary cementitious materials (SCMs) are commonly used in the manufacture of commercial cements with lower clinker content and carbon footprints, enabling environmental and performance improvements. The present article evaluated a ternary cement combining 23% calcined clay (CC) and 2% nanosilica (NS) to replace 25% of the Ordinary Portland Cement (OPC) content. For this purpose, a series of tests were performed, such as compressive strength, isothermal calorimetry, thermogravimetry (TG/DTG), X-ray diffraction (XDR), and mercury intrusion porosimetry (MIP). The ternary cement studied, 23CC2NS, presents a very high surface area, which influences hydration kinetics by accelerating silicate formation and causes an undersulfated condition. The pozzolanic reaction is potentialized by the synergy between the CC and NS, resulting in a lower portlandite content at 28 days in the 23CC2NS paste (6%) compared with the 25CC paste (12%) and 2NS paste (13%). A significant reduction in total porosity and conversion of macropores in mesopores was observed. For example, 70% of pores in OPC paste were macropores that were converted in the 23CC2NS paste into mesopores and gel pores.
Palabras clave
Texto completo
Añadir a Mi BVS
Imprimir
XML
PubMed Links
Buscar en Google

Texto completo: 1 Colección: 01-internacional Base de datos: MEDLINE Idioma: En Revista: Materials (Basel) Año: 2023 Tipo del documento: Article País de afiliación: Brasil Pais de publicación: Suiza
Texto completo
Añadir a Mi BVS
Imprimir
XML
PubMed Links
Buscar en Google

Texto completo: 1 Colección: 01-internacional Base de datos: MEDLINE Idioma: En Revista: Materials (Basel) Año: 2023 Tipo del documento: Article País de afiliación: Brasil Pais de publicación: Suiza