A simple experimental method for measuring the thermal sensitivity of single-mode fibers.
Rev Sci Instrum
; 91(10): 105114, 2020 Oct 01.
Article
en En
| MEDLINE
| ID: mdl-33138548
We present a simple technique to experimentally determine the optical-path length change with temperature for optical single-mode fibers. Standard single-mode fibers act as natural low-finesse cavities, with the Fresnel reflection of the straight cleaved surfaces being â¼3%, for the laser light coupled to them. By measuring the intensity variations due to interference of light reflected from the fiber front and end surfaces, while ramping the ambient temperature, the thermal sensitivity of the optical-path length of the fiber can be derived. Light was generated by a narrow linewidth, low drift laser. With our fairly short test fibers, we found that it was possible to reach a relative precision of the temperature sensitivity, compared to a reference fiber, on the 0.4%-2% scale and an absolute precision of 2%-5%, with the potential to improve both by an order of magnitude. The results for single-acrylate, dual-acrylate, and copper- and aluminum-coated fibers are presented. Values are compared with analytic models and results from a finite element method simulation. With the aid of these measurements, a simple fiber-interferometer, which is insensitive to thermal drifts, could be constructed.
Texto completo:
1
Colección:
01-internacional
Base de datos:
MEDLINE
Tipo de estudio:
Diagnostic_studies
Idioma:
En
Revista:
Rev Sci Instrum
Año:
2020
Tipo del documento:
Article
País de afiliación:
Suecia
Pais de publicación:
Estados Unidos