Mn-Promoted Co3O4/TiO2 as an efficient catalyst for catalytic oxidation of dibromomethane (CH2Br2).
J Hazard Mater
; 318: 1-8, 2016 Nov 15.
Article
en En
| MEDLINE
| ID: mdl-27388418
Brominated hydrocarbon is the typical pollutant in the exhaust gas from the synthesis process of Purified Terephthalic Acid (PTA), which may cause various environmental problems once emitted into atmosphere. Dibromomethane (DBM) was employed as the model compound in this study, and a series of TiO2-supported manganese and cobalt oxide catalysts with different Mn/Co molar ratio were prepared by the impregnation method and used for catalytic oxidation of DBM. It was found that the addition of Mn significantly enhanced the catalytic performance of Co/TiO2 catalyst. Among all the prepared catalysts, Mn(1)-Co/TiO2 (Mn/Co molar ratio was 1) catalyst exhibited the highest activity with T90 at about 325°C and good stability maintained for at least 30h at 500ppm DBM and 10% O2 at GHSV=60,000h(-1), and the final products in the reaction were COx, HBr and Br2, without the formation of Br-containing organics. The high activity and high stability might be attributed to the redox cycle (Co(2+)+Mn(4+)âCo(3+)+Mn(3+)) over Mn-promoted Co3O4/TiO2 catalyst. Based on the results of in situ DRIFT studies and analysis of products, a plausible reaction mechanism for catalytic oxidation of DBM over Mn-Co/TiO2 catalysts was also proposed.
Texto completo:
1
Colección:
01-internacional
Base de datos:
MEDLINE
Idioma:
En
Revista:
J Hazard Mater
Asunto de la revista:
SAUDE AMBIENTAL
Año:
2016
Tipo del documento:
Article
Pais de publicación:
Países Bajos