Chemical and structural analyses of titanium plates retrieved from patients.
Int J Oral Maxillofac Surg
; 44(8): 1005-9, 2015 Aug.
Article
en En
| MEDLINE
| ID: mdl-25735535
The aim of this study was to evaluate the microscopic structure and chemical composition of titanium bone plates and screws retrieved from patients with a clinical indication and to relate the results to the clinical conditions associated with the removal of these devices. Osteosynthesis plates and screws retrieved from 30 patients between January 2010 and September 2013 were studied by metallographic, gas, and energy dispersive X-ray (EDX) analyses and the medical records of these patients were reviewed. Forty-eight plates and 238 screws were retrieved. The time elapsed between plate and screw insertion and removal ranged between 11 days and 10 years. Metallographic analysis revealed that all the plates were manufactured from commercially pure titanium (CP-Ti). The screw samples analyzed consisted of Ti-6Al-4V alloy, except four samples, which consisted of CP-Ti. Titanium plates studied by EDX analysis presented greater than 99.7% titanium by mass. On gas analysis of Ti-6Al-4V screws, three samples were outside the standard values. One CP-Ti screw sample and one plate sample also presented an oxygen analysis value above the standard. The results indicated that the physical properties and chemical compositions of the plates and screws did not correspond with the need to remove these devices or the time of retention.
Palabras clave
Texto completo:
1
Colección:
01-internacional
Base de datos:
MEDLINE
Asunto principal:
Titanio
/
Placas Óseas
/
Tornillos Óseos
/
Procedimientos Quirúrgicos Ortognáticos
Límite:
Humans
Idioma:
En
Revista:
Int J Oral Maxillofac Surg
Asunto de la revista:
ODONTOLOGIA
Año:
2015
Tipo del documento:
Article
Pais de publicación:
Dinamarca