Your browser doesn't support javascript.
loading
In Vitro Comparison of Marginal and Internal Fit of Press-on-Metal Ceramic (PoM) Restorations with Zirconium-Supported and Conventional Metal Ceramic Fixed Partial Dentures Before and After Veneering.
Varol, Seda; Kulak-Özkan, Yasemin.
Afiliación
  • Varol S; Department of Prosthodontics, Marmara University School of Dentistry, Istanbul, Turkey.
  • Kulak-Özkan Y; Department of Prosthodontics, Marmara University School of Dentistry, Istanbul, Turkey.
J Prosthodont ; 24(5): 387-93, 2015 Jul.
Article en En | MEDLINE | ID: mdl-25274041
PURPOSE: To compare marginal and internal fit between 3- and 4-unit press-on-metal (PoM) ceramic, zirconia-supported, and conventional metal ceramic fixed partial dentures (FPDs) before and after veneering. MATERIALS AND METHODS: Ten pieces for each 3- and 4-unit MC, IPS InLine PoM, and IPS e.max ZirCAD/Zir Press FPDs were produced. Cross-sections from silicone replicas were examined and measured with a light microscope. Occlusal, axial, intermarginal, and marginal mean adaptation scores of cross-sectioned replicas and means of measurements obtained from 4 sites were calculated independently. RESULTS: Mean values for molars were 78.44 ± 32.01 µm (MC), 89.84 ± 29.20 µm (PoM), and 85.17 ± 28.49 µm (Zir). Premolar values were 76.08 ± 27.92 µm (MC), 89.94 ± 23.49 µm (PoM), and 87.18 ± 28.25 µm (Zir). No difference existed between the means of 3- and 4-unit FPDs except the molar-intermarginal region. The mean value of 4-unit FPDs (93.88 ± 25.41 µm) was less than the 3-unit FPDs (103.68 ± 24.55 µm) at the molar-inter marginal region. A gap increase was observed in all sites except the molar-axio-occlusal region after veneering. According to the mean difference, gap increases at the molar-marginal, molar-intermarginal, and premolar-intermarginal regions were statistically significant. A statistical difference was found at the molar-marginal region for 4-unit MCR (p = 0.041) and 4-unit PoM FPDs (p = 0.042) before and after veneering. Gap increase after veneering of 4-unit metal ceramics at molar-intermarginal, premolar-marginal, and premolar-intermarginal regions (p = 0.020; p = 0.015; p = 0.004) was significant. CONCLUSION: The gap measurements of the IPS InLine PoM and IPS e.max ZirCAD/Zir Press groups were all clinically acceptable. No studies on marginal and internal fit in the IPS InLine PoM system have been published to date. This study should be supported with future studies. No significant increase was observed after press-veneering the IPS e.max ZirCAD frameworks with an IPS e.max ZirPress material; therefore, we recommend the use of this combination.
Asunto(s)
Palabras clave

Texto completo: 1 Colección: 01-internacional Base de datos: MEDLINE Asunto principal: Circonio / Cerámica / Dentadura Parcial Fija Límite: Humans Idioma: En Revista: J Prosthodont Asunto de la revista: ODONTOLOGIA Año: 2015 Tipo del documento: Article País de afiliación: Turquía Pais de publicación: Estados Unidos

Texto completo: 1 Colección: 01-internacional Base de datos: MEDLINE Asunto principal: Circonio / Cerámica / Dentadura Parcial Fija Límite: Humans Idioma: En Revista: J Prosthodont Asunto de la revista: ODONTOLOGIA Año: 2015 Tipo del documento: Article País de afiliación: Turquía Pais de publicación: Estados Unidos