Frictional resistance of self-ligating versus conventional brackets in different bracket-archwire-angle combinations
J. appl. oral sci
; 22(3): 228-234, May-Jun/2014. tab, graf
Article
en En
| LILACS, BBO
| ID: lil-711710
Biblioteca responsable:
BR1.1
ABSTRACT
Objective:
To compare the influence of archwire material (NiTi, beta-Ti and stainless steel) and brackets design (self-ligating and conventional) on the frictional force resistance. Material andMethods:
Two types of brackets (self-ligating brackets - Smartclip, 3M/Unitek - and conventional brackets - Gemini, 3M/Unitek) with three (0, 5, and 10 degrees) slot angulation attached with elastomeric ligatures (TP Orthodontics) were tested. All brackets were tested with archwire 0.019"x0.025" nickel-titanium, beta-titanium, and stainless steel (Unitek/3M). The mechanical testing was performed with a universal testing machine eMIC DL 10000 (eMIC Co, Brazil). The wires were pulled from the bracket slots at a cross-head speed of 3 mm/min until 2 mm displacement.Results:
Self-ligating brackets produced significantly lower friction values compared with those of conventional brackets. Frictional force resistance values were directly proportional to the increase in the bracket/ wire angulation. With regard to conventional brackets, stainless steel wires had the lowest friction force values, followed by nickel-titanium and beta-titanium ones. With regard to self-ligating brackets, the nickel-titanium wires had the lowest friction values, significantly lower than those of other materials.Conclusion:
even at different angulations, the self-ligating brackets showed significantly lower friction force values than the conventional brackets. Combined with nickel-titanium wires, the self-ligating brackets exhibit much lower friction, possibly due to the contact between nickel-titanium clips and wires of the same material. .Palabras clave
Texto completo:
1
Colección:
01-internacional
Base de datos:
BBO
/
LILACS
Asunto principal:
Acero Inoxidable
/
Titanio
/
Soportes Ortodóncicos
/
Diseño de Aparato Ortodóncico
/
Fricción
/
Níquel
Idioma:
En
Revista:
J. appl. oral sci
Asunto de la revista:
ODONTOLOGIA
Año:
2014
Tipo del documento:
Article
País de afiliación:
Brasil
Pais de publicación:
Brasil