RESUMO
O objetivo do presente estudo foi avaliar em tomografias computadorizadas as dimensões dos tecidos periodontais supracrestais (TPSC). Cem pacientes, 600 dentes anteriores da maxila (200 incisivos centrais, 200 incisivos laterais e 200 caninos), foram avaliados. A distância média da margem gengival até a crista óssea alveolar (COA) foi de 3.25mm (95% IC: 3.20-3.30), enquanto que da junção cemento-esmalte até a COA foi de 1.77mm (95% IC: 1.72-182mm). As medidas foram significativamente diferentes entre os grupos de dentes (ANOVA, p < 0.001). A tomografia, pode representar uma importante ferramenta para a avaliação das dimensões dos TPSC.
The aim of this study was to evaluate the dimensions of the supracrestal periodontal tissues (SPT) on tomographic scans. One hundred patients, 600 maxillary anterior teeth (200 central incisors, 200 lateral incisors and 200 canines), were evaluated. The average distance from the gingival margin to the alveolar bone crest (ABC) was 3.25mm (95% CI: 3.20-3.30), while the distance from the cemento-enamel junction to ABC was 1.77mm (95% CI: 1.72-182mm). The measurements were significantly different between the tooth groups (ANOVA, p < 0.001). When properly indicated, tomography can be an important tool for assessing the dimensions of TPSCs on a case-by-case basis.
Assuntos
Humanos , Masculino , Feminino , Adolescente , Adulto , Pessoa de Meia-Idade , Adulto Jovem , Tecidos , Periodonto , Tomografia Computadorizada de Feixe Cônico , MaxilaRESUMO
OBJECTIVE: This retrospective study aimed to compare the three-dimensional (3D) outcomes of the novel miniscrew-anchored maxillary protraction (MAMP) therapy and the bone-anchored maxillary protraction (BAMP) therapy. METHODS: The sample comprised growing patients with skeletal Class III malocclusion treated with two skeletal anchored maxillary protraction protocols. The MAMP group comprised 22 patients (9 female, 13 male; 10.9â ±â 0.9 years of age at baseline) treated with Class III elastics anchored on a hybrid hyrax expander in the maxilla and two mandibular miniscrews distally to the permanent canines. The BAMP group comprised 24 patients (14 female, 10 male; 11.6â ±â 1.1 years of age at baseline) treated with Class III elastic anchored in two titanium miniplates in the infra-zygomatic crest and two miniplates in the mesial of the mandibular permanent canines. Three-dimensional displacements were measured in the pre- and post-treatment cone-beam computed tomography scans superimposed on the cranial base using the Slicer Automated Dental Tools module of 3D Slicer software (www.slicer.org). Mean differences (MD) between groups and 95% confidence interval (CI) were obtained for all variables. Intergroup comparison was performed using the Analysis of Covariance (Pâ <â .05). RESULTS: Both groups showed improvements after treatment. The MAMP group showed a smaller anterior (MD: -1.09 mm; 95% CI, -2.07 to -0.56) and 3D (MD: -1.27 mm; 95% CI, -2.16 to -0.74) displacements of the maxilla after treatment when compared with BAMP. Both groups showed negligible and similar anteroposterior changes in the mandible (MD: 0.33 mm; 95% CI, -2.15 to 1.34). A greater increase in the nasal cavity width (MD of 2.36; 95% CI, 1.97-3.05) was observed in the MAMP group when compared with BAMP. LIMITATIONS: The absence of an untreated control group to assess the possible growth impact in these findings is a limitation of this study. CONCLUSION: Both BAMP and MAMP therapies showed adequate 3D outcomes after treatment. However, BAMP therapy produced a greater maxillary advancement with treatment, while MAMP therapy showed greater transversal increases in the nasal cavity.
Assuntos
Placas Ósseas , Parafusos Ósseos , Tomografia Computadorizada de Feixe Cônico , Imageamento Tridimensional , Má Oclusão Classe III de Angle , Maxila , Procedimentos de Ancoragem Ortodôntica , Técnica de Expansão Palatina , Humanos , Feminino , Masculino , Procedimentos de Ancoragem Ortodôntica/instrumentação , Procedimentos de Ancoragem Ortodôntica/métodos , Estudos Retrospectivos , Má Oclusão Classe III de Angle/terapia , Má Oclusão Classe III de Angle/diagnóstico por imagem , Técnica de Expansão Palatina/instrumentação , Tomografia Computadorizada de Feixe Cônico/métodos , Criança , Imageamento Tridimensional/métodos , Maxila/diagnóstico por imagem , Cefalometria/métodos , Desenho de Aparelho Ortodôntico , Resultado do Tratamento , Dente Canino/diagnóstico por imagem , Mandíbula/diagnóstico por imagemRESUMO
While the literature has noted variations in hydrogen peroxide (HP) permeability, and consequently, tooth sensitivity among different types of anterior teeth, there is a scarcity of research on this specific topic. This study evaluated HP permeability and color change (CC) in different groups of human maxillary anterior teeth (canines, lateral incisors, and central incisors) after in-office bleaching with HP at 35%. Thirty teeth maxillary anterior (n=10) were bleached with HP at 35% gel in one session of three 15-minutes applications. Buccal thickness (mm) was measured from images obtained using cone beam computed tomography. The concentration of HP (µg/mL) that reached the pulp chamber was assessed using UV-Vis spectrophotometry. CC (WID, ∆Eab, and ∆E00) was evaluated before and after bleaching with a digital spectrophotometer. One-way ANOVA and Tukey's test were applied to statistically evaluate the data for buccal thickness, HP permeability, and CC (α=0.05). Comparison between thickness and HP permeability was performed using Pearson's correlation. Thicker teeth, such as canines, had lower HP amounts inside the pulp chamber compared to central and lateral incisors. Despite the significant effect of buccal thickness on HP permeability (p<0.05), no correlation was found between the two factors. CC was similar across tooth types (p>0.05). The difference in buccal thickness among the superior anterior teeth does not interfere with CC. However, a thinner buccal wall thickness is associated with greater HP permeability detected in the pulp after in-office bleaching.
Assuntos
Peróxido de Hidrogênio , Incisivo , Maxila , Clareamento Dental , Humanos , Clareamento Dental/métodos , Incisivo/diagnóstico por imagem , Cavidade Pulpar/diagnóstico por imagem , Cor , Clareadores Dentários , Espectrofotometria/métodos , Tomografia Computadorizada de Feixe CônicoRESUMO
INTRODUCTION: The long pathway that the canines take as they emerge into the maxillary arch makes them vulnerable to disruption during their natural emergence time. The process of planning treatment for impacted maxillary canine (IMC) presents significant challenges, underscoring the need for careful consideration and expertise. OBJECTIVE: The aim of this article was to shed light on these complexities by discussing clinical case studies involving IMC, providing insights into the intricacies of their management. CONCLUSIONS: The management of IMC within orthodontics presents a multifaceted challenge that include the necessity for precise diagnostic processes, prudent use of cone beam computed tomography (CBCT), the strategic selection between open and closed exposure techniques, a in-depth understanding of the specific orthodontic biomechanics involved, and a keen awareness of potential adverse outcomes such as ankylosis, prolonged treatment times, root resorption, and additional complications.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Dente Canino , Maxila , Dente Impactado , Dente Impactado/terapia , Dente Impactado/diagnóstico por imagem , Humanos , Dente Canino/diagnóstico por imagem , Maxila/diagnóstico por imagem , Planejamento de Assistência ao Paciente , Extrusão Ortodôntica/métodos , Reabsorção da Raiz/diagnóstico por imagem , Reabsorção da Raiz/terapia , Feminino , Adolescente , Fenômenos Biomecânicos , Masculino , Anquilose Dental/terapia , Anquilose Dental/diagnóstico por imagem , Criança , Técnicas de Movimentação Dentária/métodosRESUMO
The objective of this study was to compare the aging changes of the dental arches in patients treated without extractions and untreated normal occlusion subjects after a four-decade follow-up. This retrospective study evaluated two groups: The Treated Group (Group T) comprised 16 patients (6 male; 10 female) presenting with Class I or Class II malocclusions treated orthodontically without extractions. Dental models were evaluated 3 stages: T1 (pretreatment, 13.20 years), T2 (posttreatment, 15.07 years) and T3 (long-term posttreatment, 50.32 years). The Untreated Group (Group UT) consisted of 22 untreated normal occlusion individuals. The dental casts were evaluated at the ages of 13.32 (T1), 17.82 (T2) and 60.95 years (T3). The dental casts were digitized and the irregularity index, intercanine, interpremolar and intermolar widths, overjet and overbite, arch length and perimeter were measured. Intergroup comparisons were performed with independent t tests (P < 0.05). From T1 to T2, the treated group showed maxillary and mandibular crowding and overjet decrease and a maxillary interpremolar and intermolar width increase compared to the untreated group. From T2 to T3, a greater maxillary and mandibular crowding increase and a greater arch length decrease were observed in the treated group compared to the normal occlusion subjects. Overbite increased in the treated group and decreased in the untreated group. The maturational changes of treated patients were different from untreated normal occlusion subjects. Relapse might have contributed for the greater changes observed in incisor crowding and arch length observed in orthodontically treated patients. The aging changes of untreated normal occlusions and nonextraction treated patients, after a four-decade follow-up, proved to be different, indicating that relapse of orthodontic treatment played a role in aging changes of treated patients.
Assuntos
Arco Dental , Humanos , Masculino , Feminino , Seguimentos , Adolescente , Estudos Retrospectivos , Arco Dental/patologia , Pessoa de Meia-Idade , Oclusão Dentária , Má Oclusão/terapia , Má Oclusão/patologia , Má Oclusão Classe II de Angle/terapia , Má Oclusão Classe II de Angle/patologia , Ortodontia Corretiva/métodos , Envelhecimento/fisiologia , Mandíbula/patologia , Maxila/patologia , Modelos DentáriosRESUMO
INTRODUCTION: Symmetry is balance, some correspondence in the size, form, and arrangements of parts on opposite sides of a plane, line, or point. The opposite of this concept is asymmetry, or imbalance. OBJECTIVE: This retrospective study compared two methods for assessing arch symmetry with linear measurements based on triangles, to determine their applicability and efficiency. METHODS: Two groups were enrolled: children (n=20) and adults (n=20), and the arch symmetry was assessed from linear measurements. Method 1: the incisor-canine (INC), canine-molar (CM), and incisor-molar (INM) distances (paired t-test and Pearson correlation). Method 2: a mathematical equation between the cusps measurements of the canines and the distobuccal of the first molars leading to result 1 (t-test for one sample and bootstrapping analysis). Dental casts were digitized and analyzed using a software program. The Bland-Altman test compared the methods (α=0.05). RESULTS: The Bland-Altman test revealed concordance between the methods; however, separately the results were different: In method 1, the mandibular arch did not demonstrate correlation (children, INC r=0.33; CM r=0.45; INM r=0.51; adults, CM r=0.46; INM r=0.35), however, the maxilla revealed a strong correlation in children and a strong/moderate correlation in adults. In method 2, both arches were symmetrical (p>0.05). CONCLUSION: Method 1 may be appropriate during orthodontic treatment, and method 2 may be indicated for final treatment. These methods are useful; however, only method 1 identified the side of asymmetry. The methods can contribute to future studies in syndromic and non-syndromic patients, before and after orthognathic surgeries and orthodontic treatment, comparing results.
Assuntos
Dente Canino , Arco Dental , Incisivo , Dente Molar , Humanos , Arco Dental/anatomia & histologia , Estudos Retrospectivos , Criança , Adulto , Dente Canino/anatomia & histologia , Dente Canino/diagnóstico por imagem , Feminino , Dente Molar/anatomia & histologia , Incisivo/anatomia & histologia , Masculino , Modelos Dentários , Mandíbula/anatomia & histologia , Maxila/anatomia & histologia , Cefalometria/métodos , Adolescente , Adulto JovemRESUMO
OBJECTIVE: This study aimed to assess root volumes of maxillary canines and adjacent lateral incisors in patients with unilateral maxillary canine impaction. METHODS: This cross-sectional study was performed on cone-beam computed tomography (CBCT) scans of 100 patients (49 females and 51 males) with unilateral maxillary canine impaction. The images were loaded in Planmeca Romexis Viewer, and root layers between the cementoenamel junction and apex were reconstructed at 600-µm intervals. At each layer, the root boundary was marked, and finally, the root volume was calculated by multiplying the layers' area by the thickness of 600 µm. The root size of canines and lateral incisors was compared between the impaction and normal eruption sides. RESULTS: Sixty-two patients showed buccal canine impaction, and 38 presented palatal impaction. The mean root volume of canines on the impaction side was significantly greater than that on the normal eruption side; either the tooth was buccally or palatally impacted (p<0.001). The lateral incisors on the side of buccally-impacted canines showed a significantly smaller root volume than that of the contralateral side (p<0.001). However, there was no significant difference in the root size of lateral incisors between the two sides in cases presenting palatal canine impaction (p=0.177). CONCLUSION: The difference in root volume of canines between the two sides can serve as an indicator of canine impaction. The reduction in the root size of the lateral incisor on the side of the buccally impacted canine may be due to root resorption created by pressure from the canine's crown.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Dente Canino , Incisivo , Maxila , Raiz Dentária , Dente Impactado , Humanos , Dente Impactado/diagnóstico por imagem , Masculino , Dente Canino/diagnóstico por imagem , Feminino , Incisivo/diagnóstico por imagem , Estudos Transversais , Maxila/diagnóstico por imagem , Raiz Dentária/diagnóstico por imagem , Adolescente , Adulto Jovem , Adulto , CriançaRESUMO
Managing teeth with open apices can be a challenging scenario for clinicians. This case report describes the 24-year follow-up of a maxillary central incisor that failed to develop after a traumatic injury resulting in a wide-open apex. A 10-year-old girl presented complaining of discomfort in her upper teeth. Tooth #9 had received a traumatic blow several years before and was discoloured with a resin composite restoration on the mesio-incisal edge. The tooth was painful to percussion and palpation. An inadequate root canal filling and incomplete root formation were observed on the initial periapical radiograph. Root canal retreatment was initiated, and the canal filled entirely with mineral trioxide aggregate (MTA) because of the extremely wide canal and open apex. The patient was asymptomatic at the 24-year follow-up with the cone beam computed tomography and periapical radiographs demonstrating the stability of the MTA.
Assuntos
Compostos de Alumínio , Compostos de Cálcio , Combinação de Medicamentos , Incisivo , Maxila , Óxidos , Retratamento , Materiais Restauradores do Canal Radicular , Silicatos , Ápice Dentário , Humanos , Feminino , Compostos de Cálcio/uso terapêutico , Compostos de Alumínio/uso terapêutico , Incisivo/lesões , Silicatos/uso terapêutico , Criança , Óxidos/uso terapêutico , Materiais Restauradores do Canal Radicular/uso terapêutico , Retratamento/métodos , Seguimentos , Ápice Dentário/diagnóstico por imagem , Tomografia Computadorizada de Feixe Cônico/métodos , Obturação do Canal Radicular/métodosRESUMO
INTRODUCTION: Bidirectional vertical ridge augmentation in the posterior maxilla is very challenging. PURPOSE: To evaluate the regenerative potential of micrografts, derived from periosteum or bone tissue, added to an anorganic xenograft in vertical reconstruction of the posterior maxilla, by a prospective, controlled study. MATERIALS AND METHODS: After clinical selection and the analysis of CBCT scans, 24 posterior maxillary sites, in 19 patients, were treated by using Barbell Technique®. Sites requiring both inlay and onlay reconstruction were enrolled in the study. In the Control Group (CG, n = 8), a xenograft was used in the inlay site and for the onlay site, a 1:1 mix of xenograft and an autograft was used. In Test Group 1 (TG1, n = 8), both inlay and onlay sites were grafted with the xenograft associated with the micrografts derived from periosteum. In Test Group 2 (TG2, n = 8), both inlay and onlay sites were grafted with the xenograft associated with the micrografts derived from bone. Six months after the procedures, CBCT scans were obtained, and bone biopsy samples were harvested during implant placement surgery. The bone specimens were analyzed histomorphometrically, by measuring the percentages of vital mineralized tissue (VMT), non vital mineralized tissue (NVMT) and non mineralized tissue (NMT). Immunohistochemically, the levels of VEGF were categorized by a score approach. RESULTS: Histomorphometric analysis revealed, for the inlay grafts, no significant difference among the groups for VMT, NVMT and NMT. However, for onlay grafts, CG achieved a higher amount of VMT in comparison with TG2, and the opposite occurred for NMT values. In this regard, no statistical difference was observed between CG and TG1. Concerning immunohistochemistry, the VEGF values for CG and TG1 were slightly higher than those obtained by TG2 for both inlay and onlay grafts, but without statistical significance. CBCT analysis showed a similar level of gain for all groups, for both inlay and onlay bone augmentation sites. Clinically, one implant (in CG) within a total of 50 implants installed, had early failure and was replaced after 3 months. All patients received implant supported prosthesis. CONCLUSION: This study indicated that the clinical use of micrograft derived from periosteum may have some potential to increase bone formation in onlay reconstructions, unlike the micrograft derived from bone tissue.
Assuntos
Aumento do Rebordo Alveolar , Transplante Ósseo , Humanos , Aumento do Rebordo Alveolar/métodos , Transplante Ósseo/métodos , Masculino , Feminino , Estudos Prospectivos , Pessoa de Meia-Idade , Adulto , Xenoenxertos , Periósteo/transplante , Periósteo/cirurgia , Maxila/cirurgia , Tomografia Computadorizada de Feixe Cônico , Transplante Autólogo , Autoenxertos/transplante , IdosoRESUMO
OBJECTIVE: To evaluate the effect of rapid palatal expansion (RPE) using Haas-type expanders on children's oral health-related quality of life (OHRQOL) and compare said effect with that previously reported for the use of Hyrax-type expanders. MATERIALS AND METHODS: Forty participants aged 8-10 years with transverse maxillary deficiency were treated using Haas appliances. OHRQOL was measured using the CPQ8 - 10 before RPE, during RPE (T1), at the end of RPE (T2), and 1 month after appliance removal (T3). Generalized mixed models were fitted to assess the effect of the Haas-type expander compared to previously collected data (a nontreated and a Hyrax-type expander-treated group). RESULTS: RPE with Haas-type appliances had a negative impact on overall OHRQOL at T1 and T2 (P = 0.001), and a positive impact at T3 (P = 0.001). The Haas-type expander had a significantly greater negative impact on OHRQOL than the Hyrax-type appliance during RPE. At T1, overall scores using the Haas-type expander were 1.08 times the scores using the Hyrax-type expander (i.e., 8% increase; 95% CI, 1.01-1.17; P = 0.033). Patients using the Haas appliance had 1.24 times the scores of those using Hyrax-type devices for the oral symptoms domain at T1 (i.e., 24% increase; 95% CI, 1.06-1.46; P = 0.009). CONCLUSIONS: Correction of the transverse maxillary deficiency by RPE using the Haas appliance in children 8-10 years improves OHRQOL. The Haas- and Hyrax-type devices temporarily worsen OHRQOL during treatment, however, the negative impact is less with the Hyrax-type expander than with the Haas-type expander, because it causes fewer negative oral symptoms. CLINICAL RELEVANCE: From a patient-centered perspective, the use of the Hyrax over the Haas appliance may be suggested as it causes less negative oral symptoms during use.
Assuntos
Técnica de Expansão Palatina , Qualidade de Vida , Humanos , Técnica de Expansão Palatina/instrumentação , Criança , Feminino , Masculino , Resultado do Tratamento , Saúde Bucal , Desenho de Aparelho Ortodôntico , Inquéritos e Questionários , Maxila/anormalidadesRESUMO
AIM: To evaluate the influence of different levels of metal artifact reduction (MAR) tool and milliamperage (mA) on the diagnosis of fracture extension in endodontically treated teeth using cone beam CT (CBCT). MATERIALS AND METHODS: Ten maxillary premolars were endodontically treated and positioned in the empty sockets of a human maxilla covered with wax. CBCT acquisitions were performed using the Eagle Edge device (Dabi Atlante, Brazil) adjusted to 120 kVp, FOV of 4 × 6 cm, exposure time of 24 s and voxel size of 0.2 mm in 8 different conditions with different MAR (1, 2 and 3) and mA (3.2 and 6.3) levels. Crown-root fractures were simulated in the universal testing machine, and CBCT images were acquired again. Five radiologists evaluated the presence and extension of fractures with a 5-point scale. Statistical analysis was performed by analysis of variance, Tukey and Kappa test (α = 0.05). RESULTS: Although different mA levels did not significantly (p > 0.05) affect the diagnosis values for fracture presence and extension, when evaluated the different levels of MAR, AUC and sensitivity showed significantly higher values (p < 0.05) for MAR 0 using 6.3 mA and kappa agreement showed significantly higher values (p < 0.05) for MAR 0 and 2 using 6.3 mA. CONCLUSIONS: Although mA levels do not have a diagnostic effect when isolating the MAR level; in 6.3 mA, MAR 0 and 2 can positively influence the diagnosis of fracture extension in endodontically treated teeth using CBCT. CLINICAL RELEVANCE: The isolate evaluation of dental fracture presence can overlook diagnostics error of its extension.
Assuntos
Artefatos , Dente Pré-Molar , Tomografia Computadorizada de Feixe Cônico , Fraturas dos Dentes , Dente não Vital , Humanos , Fraturas dos Dentes/diagnóstico por imagem , Tomografia Computadorizada de Feixe Cônico/métodos , Dente não Vital/diagnóstico por imagem , Dente Pré-Molar/diagnóstico por imagem , Dente Pré-Molar/lesões , Técnicas In Vitro , Metais , Maxila/diagnóstico por imagem , Sensibilidade e EspecificidadeRESUMO
Currently, a new non-subtractive drilling technique, called osseodensification (OD), has been developed. It involves using specially designed drills with large negative cutting angles that rotate counterclockwise, causing expansion through plastic bone deformation, thus compacting the autologous bone to the osteotomy walls, which improves the primary stability of the implant.The present systematic review aimed to determine whether the OD technique can increase the primary stability of dental implants in the posterior maxilla region as compared to the conventional drilling (CD) technique.Five databases were searched up to June 30, 2022. The inclusion criteria embraced observational clinical studies, randomized and non-randomized controlled trials, human studies in vivo, comparing OD and CD, with the measurement of the primary stability of implants in the posterior maxilla region by means of the implant stability quotient (ISQ). The tools used to assess the risk of bias were RoB 2 and the NewcastleOttawa Scale (NOS).Seven articles met the inclusion criteria, with 4 classified as having a low risk of bias and 3 with a moderate risk of bias. The OD technique consistently demonstrated an average ISQ value of 73 KHz across all studies, whereas CD yielded an average value of 58.49 kHz (p < 0.001 for 5 articles).It can be concluded that in comparison with CD, OD improves primary stability at baseline in low-density bone, such as the maxilla.
Assuntos
Implantação Dentária Endóssea , Implantes Dentários , Maxila , Humanos , Implantação Dentária Endóssea/instrumentação , Implantação Dentária Endóssea/métodos , Maxila/cirurgia , Osseointegração , Osteotomia/métodosRESUMO
O edentulismo tem uma série de consequências deletérias para a saúde bucal e geral. As consequências bucais variam desde a bem conhecida reabsorção do rebordo residual até uma função mastigatória prejudicada, uma dieta não saudável, incapacidade social e má qualidade de vida da saúde bucal. Para superar essas dificuldades, pode-se dispor de procedimentos cirúrgicos, como os implantes pterigoideos. Realizar uma análise, por meio de revisão de literatura, da técnica all-on-four híbrida com implantes pterigoideos, como alternativa a reabilitação em maxila atrófica. Foi realizada uma revisão da literatura, com seleção de artigos indexados nas bases de dados PubMed, Scielo, Cochrane e Google Acadêmico. Nesses levantamentos foram utilizados termos como: "all-on-four", "implantes inclinados", "implantes pterigoideos", "implantes zigomáticos" e "maxilla atrófica", e suas correspondentes em inglês. Com essa revisão de literatura pode-se inferir que a técnica all-on-four híbrida utilizando implantes pterigoideos para reabilitação de maxila atrófica é uma possibilidade segura, eficaz e previsível que soluciona casos que apresentam limitações ósseas. Quando bem executada pelo profissional é possível devolver ao paciente função e estética anteriormente comprometidas, consequentemente reestabelecimento da qualidade de vida do indivíduo.
Edentulism has a number of deleterious consequences for oral and general health. Oral consequences range from the well-known residual ridge resorption to impaired masticatory function, an unhealthy diet, social disability and poor oral health quality of life. To overcome these difficulties, surgical procedures can be used, such as pterygoid implants. However, these are not without complications. Through a literature review, of the hybrid all-on-four technique with pterygoid implants as an alternative to rehabilitation in atrophic maxilla. For this, bibliographic research was carried out in the databases PubMed, Scielo, Cochrane and Google Scholar, using the following search terms: "all-on-four", "tilted implants", "pterygoid implants", "zygomatic implants" e "atrophic maxilla", in both Portuguese and English languages. With this literature review, It can be inferred that the hybrid all-on-four technique using pterygoid implants for rehabilitation of atrophic maxilla is a safe, effective and predictable possibility that solves cases with bone limitations. When well performed by the professional, it is possible to return previously compromised function and aesthetics to the patient, consequently reestablishing the individual's quality of life.
Assuntos
Qualidade de Vida , Implantes Dentários , Maxila , Reabilitação BucalRESUMO
BACKGROUND: Cranial, facial, nasal, and maxillary widths have been shown to be significantly affected by the individual's sex. The present study aims to use measurements of dental arch and maxillary skeletal base to determine sex, employing supervised machine learning. MATERIALS AND METHODS: Maxillary and mandibular tomographic examinations from 100 patients were analyzed to investigate the inter-premolar width, inter-molar width, maxillary width, inter-pterygoid width, nasal cavity width, nostril width, and maxillary length, obtained through Cone Beam Computed Tomography scans. The following machine learning algorithms were used to build the predictive models: Logistic Regression, Gradient Boosting Classifier, K-Nearest Neighbors (KNN), Support Vector Machine (SVM), Multi-Layer Perceptron Classifier (MLP), Decision Tree, and Random Forest Classifier. A 10-fold cross-validation approach was adopted to validate each model. Metrics such as area under the curve (AUC), accuracy, recall, precision, and F1 Score were calculated for each model, and Receiver Operating Characteristic (ROC) curves were constructed. RESULTS: Univariate analysis showed statistical significance (p < 0.10) for all skeletal and dental variables. Nostril width showed greater importance in two models, while Inter-molar width stood out among dental measurements. The models achieved accuracy values ranging from 0.75 to 0.85 on the test data. Logistic Regression, Random Forest, Decision Tree, and SVM models had the highest AUC values, with SVM showing the smallest disparity between cross-validation and test data for accuracy metrics. CONCLUSION: Transverse dental arch and maxillary skeletal base measurements exhibited strong predictive capability, achieving high accuracy with machine learning methods. Among the evaluated models, the SVM algorithm exhibited the best performance. This indicates potential usefulness in forensic sex determination.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Arco Dental , Aprendizado de Máquina , Maxila , Humanos , Feminino , Masculino , Maxila/diagnóstico por imagem , Maxila/anatomia & histologia , Tomografia Computadorizada de Feixe Cônico/métodos , Adulto , Arco Dental/diagnóstico por imagem , Arco Dental/anatomia & histologia , Pessoa de Meia-Idade , Adulto Jovem , Determinação do Sexo pelo Esqueleto/métodos , Adolescente , Análise para Determinação do Sexo/métodos , Estudos RetrospectivosRESUMO
BACKGROUND: Micro-osteoperforation is a minimally invasive technique aimed at accelerating tooth movement. The goal of this novel experimental study was to assess tooth movement and stress distribution produced by the force of orthodontic movement on the tooth structure, periodontal ligament, and maxillary bone structure, with and without micro-osteoperforation, using the finite element method. MATERIALS AND METHODS: Cone-beam computed tomography was used to obtain a virtual model of the maxilla and simulate the extraction of right and left first premolars. Three micro-osteoperforations (1.5 x 5 mm) were made in the hemiarch on the distal and mesial surfaces of upper canines, according to the power tip geometry of the Propel device (Propel Orthodontics, Ossining, New York, USA). An isotropic model of the maxilla was fabricated according to the finite element method by insertion of mechanical properties of the tooth structures, with orthodontic force (1.5 N) simulation in the distal movement on the upper canine of a hemiarch. RESULTS: Initial movement was larger when micro-osteoperforations were performed on the dental crown (24%) and on the periodontal ligament (29%). In addition, stress distribution was higher on the bone structure (31%) when micro-osteoperforations were used. CONCLUSIONS: Micro-osteoperforations considerably increased the movement of both the dental crown and periodontal ligament, which highlights their importance in the improvement of orthodontic movement, as well as in stress distribution across the bone structure. Important stress absorption regions were identified within micro-osteoperforations.
Assuntos
Análise de Elementos Finitos , Ligamento Periodontal , Técnicas de Movimentação Dentária , Técnicas de Movimentação Dentária/métodos , Humanos , Ligamento Periodontal/fisiologia , Maxila/fisiologia , Estresse Mecânico , Tomografia Computadorizada de Feixe Cônico/métodos , Fenômenos BiomecânicosRESUMO
OBJECTIVE: The purpose of this article is to present the MISMARPE technique, a new minimally invasive surgical procedure to treat maxillary transverse atresia in adult patients under local anesthesia and on an outpatient basis. TECHNIQUE DESCRIPTION: The technique consists of miniscrew-assisted rapid palatal expansion (MARPE) associated with a minimally invasive approach using maxillary osteotomies, latency and activation periods until the desired expansion is achieved. The present MISMARPE technique was performed in 25 consecutive cases with a success rate of 96%, yielding good skeletal outcomes with minimal trauma. The expander appliances, with their anchorage types, and a description of the surgical steps of the MISMARPE technique are presented. CONCLUSION: MISMARPE is a new and effective alternative for less invasive treatment of maxillary transverse deficiency in adults, compared to conventional surgery. Emphasis is placed on the importance of systematic and well-established protocols, for executing the procedures safely and predictably.
Assuntos
Parafusos Ósseos , Maxila , Procedimentos Cirúrgicos Minimamente Invasivos , Procedimentos de Ancoragem Ortodôntica , Técnica de Expansão Palatina , Humanos , Técnica de Expansão Palatina/instrumentação , Procedimentos Cirúrgicos Minimamente Invasivos/métodos , Procedimentos Cirúrgicos Minimamente Invasivos/instrumentação , Adulto , Procedimentos de Ancoragem Ortodôntica/instrumentação , Procedimentos de Ancoragem Ortodôntica/métodos , Maxila/cirurgia , Feminino , Masculino , Resultado do Tratamento , Adulto Jovem , Osteotomia Maxilar/métodos , AdolescenteRESUMO
OBJECTIVES: This study evaluated the impact of variations in anteroposterior and lateral tilts of patients head on radiation-weighted doses to organs/tissues and effective doses using 3 different cone beam computed tomography (CBCT) machines. METHODS: An anthropomorphic phantom was used to estimate radiation doses in 3 CBCT machines (OP300, Eagle X 3D, and Eagle Edge). Thermoluminescent dosimeters were placed in regions corresponding to pre-stablished organ/tissues. CBCT examinations from the posterior mandible and anterior maxilla regions were acquired, with 3 different anteroposterior angulations (0°, 30°, and 45°), and from the posterior mandible in 3 different lateral angulations (0°, 20° to the left, and 20° to the right side). Radiation-weighted doses for each organ/tissue and effective doses were calculated for each machine and angulation. RESULTS: For the posterior mandible acquisitions, anteroposterior angulations of the head at 30° and 45° yielded a reduction in effective doses in all 3 devices. A 20° tilt to the right side resulted in lower doses than to the left [same side as the field of view (FOV)]. For the anterior maxilla, increased anteroposterior angulation was associated with reduction in effective dose in 2 devices. CONCLUSIONS: Effective doses are lower when small FOV CBCT exams of the posterior mandible and anterior maxilla are acquired with increased anteroposterior head angulation at 30° and 45°. For FOV in the posterior mandible, a 20° lateral tilt towards the side opposite to the FOV also yields lower effective doses. The main contribution to these dose reductions is the decrease in dose to salivary glands.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Imagens de Fantasmas , Doses de Radiação , Dosimetria Termoluminescente , Tomografia Computadorizada de Feixe Cônico/métodos , Humanos , Cabeça/diagnóstico por imagem , Posicionamento do Paciente , Mandíbula/diagnóstico por imagem , Maxila/diagnóstico por imagemRESUMO
Guided bone regeneration involving the use of titanium mesh and platelet-rich fibrin could be a feasible approach in cases of severely atrophic ridges. The purpose of this case report was to present an esthetic and functional rehabilitation in the anterior maxilla with the installation of dental implants in conjunction with guided bone regeneration using titanium mesh and advanced platelet-rich fibrin (A-PRF). A 60-year-old patient presented bone atrophy and partial edentulism in the anterior maxilla. After clinical and cone beam computed tomography assessment, guided bone regeneration was planned using a titanium mesh and A-PRF with xenograft bone. After 8 months of healing, the dental implants were placed with the aid of a surgical guide to obtain accurate 3-dimensional positioning. Prosthetic rehabilitation was carried out with individualized crowns. After 2 years of follow-up, radiographic analysis demonstrated a good quality and density of the bone tissue adjacent to the dental implants. No radiolucent areas were observed, and there were no clinical signs of failure. In cases of severe atrophy, using a titanium mesh and A-PRF proved to be a feasible alternative for bone reconstruction prior to dental implant placement. This approach can aid dental professionals in achieving an ideal implant positioning for rehabilitation with individualized crowns.
Assuntos
Regeneração Óssea , Tomografia Computadorizada de Feixe Cônico , Maxila , Fibrina Rica em Plaquetas , Telas Cirúrgicas , Titânio , Humanos , Pessoa de Meia-Idade , Maxila/cirurgia , Seguimentos , Implantação Dentária Endóssea/métodos , Coroas , Masculino , Implantes Dentários , Regeneração Tecidual Guiada Periodontal/métodos , Arcada Parcialmente Edêntula/reabilitação , Arcada Parcialmente Edêntula/cirurgia , FemininoRESUMO
Introducción: El ángulo ANB de Steiner entrega la relación entre el maxilar y la mandíbula en sentido anteroposterior y es una de las medidas cefalométricas más aplicadas en ortodoncia. Su identificación precisa podría presentar dificultades, influyendo directamente en el posterior estudio cefalométrico, diagnóstico y plan de tratamiento. El objetivo de esta investigación fue comparar la medición del ángulo ANB de Steiner entre estudiantes de pregrado de odontología y postítulo de ortodoncia de la Facultad de Odontología de la Universidad de Chile 2020. Materiales y Métodos: Por medio del programa Adobe Photoshop CS6 (Adobe System ®), se solicitó a los estudiantes la identificación de los puntos Nasion, A y B en 5 telerradiografías laterales de cráneo. Al aplicar los criterios de inclusión y exclusión se reclutaron 15 estudiantes de cada grupo. Luego se unieron los puntos mediante trazados, se midió el ángulo ANB de Steiner y se utilizó el coeficiente de correlación intraclase (ICC) para determinar el grado de acuerdo. Resultados: Se encontró un coeficiente de correlación intraclase ICC promedio de 0.97 entre ambos grupos de estudiantes. Conclusión: No hay diferencia estadística en la determinación del ángulo ANB de Steiner entre estudiantes de pregrado de odontología y postítulo de ortodoncia.
Background: The Steiner ANB angle measures the relationship between the maxilla and mandible in the anteroposterior direction and is one of the most applied cephalometric measurements in orthodontics. Its precise identification could pose difficulties, directly influencing the subsequent cephalometric study, diagnosis and treatment plan. The aim of this research was to compare the measurement of the Steiner ANB angle between dental student and postgraduate students in orthodontics from the Faculty of Dentistry of the University of Chile 2020. Materials and Methods: Using the Adobe Photoshop CS6 program (Adobe System ®), the students were asked to identify the Nasion, A and B points in 5 lateral cephalogram of the skull. By applying the inclusion and exclusion criteria, 15 students were recruited from each group. The points were then joined by tracing, the Steiner ANB angle was measured, and the intraclass correlation coefficient (ICC) was used to determine the degree of agreement. Results: An average ICC intraclass correlation coefficient of 0.97 was found between both groups of students. Conclusion: T here is no statistical difference in the determination of the Steiner ANB angle between undergraduate students of dentistry and postgraduate students of orthodontics.
Assuntos
Humanos , Cefalometria/métodos , Má Oclusão/diagnóstico por imagem , Mandíbula/diagnóstico por imagem , Maxila/diagnóstico por imagem , Ortodontia , Estudos Transversais , Mandíbula/anatomia & histologia , Maxila/anatomia & histologiaRESUMO
PURPOSE: To evaluate the intramucosal retention system in patients' masticatory efficiency and quality of life in this case series. MATERIAL AND METHODS: A total of 3 individuals with maxillectomy were included for rehabilitation with a complete obturator prostheses with an intramucosal retention system (OPI). The complete obturator prostheses was made for 60 days, and electromyography assessments and bite force were applied before, after 30, 60, and 90 days of surgery and prostheses installation. The University of Washington Quality of Life Questionnaire (UW-QoL) and the Obturator Functional Scale (OFS) were also administered at baseline and in the same follow-up periods. The electromyography was evaluated on both sides of the masseter, temporalis, and buccinator muscles while chewing hard and soft food. The maximum bite force was recorded in the central incisors and both sides of the first molar region. RESULTS: Bite force values increased in the first molar region, and muscular electrical activity remained constant. Items related to the taste and swallowing of the UW-QOL impacted. Most OFS questionnaire data responses indicated that patients improved in swallowing liquid foods and appearance. CONCLUSIONS: The rehabilitative capacity improves masticatory efficiency and QoL in adults maxilectomized and rehabilitated with OPI analysis in the study. Further clinical studies should be encouraged to determine the effectiveness of this retentive system.