RESUMO

Establishing when, and from where, carbon, nitrogen and water were delivered to Earth is a fundamental objective in understanding the origin of habitable planets such as Earth. Yet, volatile delivery to Earth remains controversial1-5. Krypton isotopes provide insights on volatile delivery owing to their substantial isotopic variations among sources6-10, although pervasive atmospheric contamination has hampered analytical efforts. Here we present the full suite of krypton isotopes from the deep mantle of the Galápagos and Iceland plumes, which have the most primitive helium, neon and tungsten isotopic compositions11-16. Except for 86Kr, the krypton isotopic compositions are similar to a mixture of chondritic and atmospheric krypton. These results suggest early accretion of carbonaceous material by proto-Earth and rule out any combination of hydrodynamic loss with outgassing of the deep or shallow mantle to explain atmospheric noble gases. Unexpectedly, the deep-mantle sources have a deficit in the neutron-rich 86Kr relative to the average composition of carbonaceous meteorites, which suggests a nucleosynthetic anomaly. Although the relative depletion of neutron-rich isotopes on Earth compared with carbonaceous meteorites has been documented for a range of refractory elements1,17,18, our observations suggest such a depletion for a volatile element. This finding indicates that accretion of volatile and refractory elements occurred simultaneously, with krypton recording concomitant accretion of non-solar volatiles from more than one type of material, possibly including outer Solar System planetesimals.

Assuntos

RESUMO

Combined coarse-grained (CG) and atomistic molecular dynamics (MD) simulations were performed to study the interactions of xenon with model lipid rafts consisting of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC) and cholesterol (Chol). At a concentration of 2 Xe/lipid we observed an unexpected result: spontaneous nucleation of Xe nano bubbles which rapidly plunged into the bilayer. In this process Chol, essential for raft stabilization, was pulled out from the raft into the hydrophobic zone. When concentration was further increased (3 Xe/lipid), the bubbles increase in size and disrupted both the membrane and raft. We computed the radial distribution functions, pair-wise potentials, second virial coefficients and Schlitter entropy to scrutinize the nature of the interactions. Our findings, concurring with a recent report on the origin of general anaesthesia (M. A. Pavel, E. N. Petersen, H. Wang, R. A. Lerner and S. B. Hansen, Proc. Natl. Acad. Sci. U. S. A., 2020, 117(24), 13757-13766), suggest that the well-known anaesthetic effect of Xe could be mediated by sequestration of Chol, which, in turn, compromises the stability of rafts where specialized proteins needed to produce the nervous signal are anchored.

Assuntos

RESUMO

Ultraviolet (UV) light has destructive activity against pathogenic bacteria including Clostridioides difficile spores. Portable pulsed-xenon UV disinfecting devices were implemented for terminal room cleaning in 6 units of our academic hospital with high C. difficile infection (CDI) rates. CDI rates were measured in a 9-month period before and a 9-month period after device implementation. Despite documented administration of UV disinfection for 87% of terminal room cleaning, no impact on CDI rates was detected.

Assuntos

RESUMO

BACKGROUND: Hospital environment in patient care has been linked on healthcare-associated infections (HAI). No touch disinfection technologies that utilize pulsed xenon ultraviolet light has been recognized to prevent infection in contaminated environments. The purpose of this study was: 1) to evaluate the effectiveness of pulsed-xenon ultraviolet light (PX-UV) disinfection for the reduction of bacteria on environmental surfaces of Hospital General Enrique Garcés, and 2) to evaluate the in-vitro efficacy against multi-drug resistance microorganisms. METHODS: This was a quality-improvement study looking at cleaning and disinfection of patient areas. During the study, a total of 146 surfaces from 17 rooms were sampled in a secondary 329-bed public medical center. Microbiological samples of high-touch surfaces were taken after terminal manual cleaning and after pulsed xenon ultraviolet disinfection. Cleaning staff were blinded to the study purpose and told clean following their usual protocols. For positive cultures PCR identification for carbapenemase-resistance genes (blaKPC, blaIMP, blaVIM, and blaNDM) were analyzed and confirmed by sequencing. The total number of colony forming units (CFU) were obtained and statistical analyses were conducted using Wilcoxon Rank Sum tests to evaluate the difference in CFU between terminal manual cleaning and after pulsed xenon ultraviolet disinfection. RESULTS: After manual disinfection of 124 surfaces showed a total of 3569 CFU which dropped to 889 CFU in 80 surfaces after pulsed xenon disinfection (p < 0.001). Overall, the surface and environmental contamination was reduced by 75% after PX-UV compared to manual cleaning and disinfection. There were statistically significant decreases in CFU counts of high touch surfaces in OR 87% (p < 0.001) and patient rooms 76% (p < 0.001). Four rooms presented serine carbapenemases blaKPC, and metallo beta-lactamases blaNDM, blaVIM, blaIMP. confirmed by PCR and sequencing. The in-vitro testing with endemic strains found that after five minutes of pulsed xenon ultraviolet exposure an 8-log reduction was achieved in all cases. CONCLUSION: This study is one of the first of its kind in an Ecuador Hospital. We found that pulsed-xenon ultraviolet disinfection technology is an efficacious complement to the established manual cleaning protocols and guidelines in the significant reduction of MDRO.

Assuntos

RESUMO

Abstract The subject of the study was the stability of human white blood cell membranes subject to noble gases (xenon ad krypton, 0.6 mPa) clathrate cryoanabiosis (‒80°C). A unique portable stainless steel low pressure container with a compartment for flexible plastic container was designed to ensure that the cells are saturated with gases. The samples were warmed after 1 and 30 days in a water bath (+38°C) for 35-50 sec, while the container was being tilted (2-3 times per second), until the temperature of the biological object reached +3±1°C. It was demonstrated that after 30 days of clathrate anabiosis (-80°C) over 95% (of the original number) of leukocytes remain viable, and cell membranes of 54.5±3.4% of them is resistant to trypan blue; granulocyte survival rate is 73.5±2.7%, original lipid peroxidation rate and antioxidant activity are retained. Biological object cryopreservation in noble gases environment is a promising trend in biology and medicine.

Assuntos

RESUMO

The low survival of insect-pathogenic fungi when used for insect control in agriculture is mainly due to the deleterious effects of ultraviolet radiation and heat from solar irradiation. In this study, conidia of 15 species of entomopathogenic fungi were exposed to simulated full-spectrum solar radiation emitted by a Xenon Test Chamber Q-SUN XE-3-HC 340S (Q-LAB® Corporation, Westlake, OH, USA), which very closely simulates full-spectrum solar radiation. A dendrogram obtained from cluster analyses, based on lethal time 50 % and 90 % calculated by Probit analyses, separated the fungi into three clusters: cluster 3 contains species with highest tolerance to simulated full-spectrum solar radiation, included Metarhizium acridum, Cladosporium herbarum, and Trichothecium roseum with LT50 > 200 min irradiation. Cluster 2 contains eight species with moderate UV tolerance: Aschersonia aleyrodis, Isaria fumosorosea, Mariannaea pruinosa, Metarhizium anisopliae, Metarhizium brunneum, Metarhizium robertsii, Simplicillium lanosoniveum, and Torrubiella homopterorum with LT50 between 120 and 150 min irradiation. The four species in cluster 1 had the lowest UV tolerance: Lecanicillium aphanocladii, Beauveria bassiana, Tolypocladium cylindrosporum, and Tolypocladium inflatum with LT50 < 120 min irradiation. The QSUN Xenon Test Chamber XE3 is often used by the pharmaceutical and automotive industry to test light stability and weathering, respectively, but it was never used to evaluate fungal tolerance to full-spectrum solar radiation before. We conclude that the equipment provided an excellent tool for testing realistic tolerances of fungi to full-spectrum solar radiation of microbial agents for insect biological control in agriculture.

Assuntos

RESUMO

The synthesis of nanoparticles is usually carried out by chemical reduction, which is effective but uses many toxic substances, making the process potentially harmful to the environment. Hence, as part of the search for environmentally friendly or green synthetic methods, this study aimed to produce silver nanoparticles (AgNPs) using only AgNO3, Milli-Q water, white light from a xenon lamp (Xe) and amino acids. Nanoparticles were synthetized using 21 amino acids, and the shapes and sizes of the resultant nanoparticles were evaluated. The products were characterized by UV-Vis, zeta potential measurements and transmission electron microscopy. The synthesis of silver nanoparticles with tryptophan and tyrosine, methionine, cystine and histidine was possible through photoreduction method. Spherical nanoparticles were produced, with sizes ranging from 15 to 30 nm. Tryptophan does not require illumination nor heating, and the solution color changes immediately after the mixing of reagents if sodium hydroxide is added to the solution (pH = 10). The Xe illumination acts as sodium hydroxide in the nanoparticles synthesis, releases H+ and allows the reduction of silver ions (Ag+) in metallic silver (Ag0).

Assuntos

RESUMO

OBJECTIVES: The anesthetic gas xenon is reported to preserve hemodynamic stability during general anesthesia. However, the effects of the gas during shock are unclear. The objective of this study was to evaluate the effect of Xe on hemodynamic stability and tissue perfusion in a canine model of hemorrhagic shock. METHOD: Twenty-six dogs, mechanically ventilated with a fraction of inspired oxygen of 21% and anesthetized with etomidate and vecuronium, were randomized into Xenon (Xe; n = 13) or Control (C; n = 13) groups. Following hemodynamic monitoring, a pressure-driven shock was induced to reach an arterial pressure of 40 mmHg. Hemodynamic data and blood samples were collected prior to bleeding, immediately after bleeding and 5, 20 and 40 minutes following shock. The Xe group was treated with 79% Xe diluted in ambient air, inhaled for 20 minutes after shock. RESULT: The mean bleeding volume was 44 mL.kg-1 in the C group and 40 mL.kg-1 in the Xe group. Hemorrhage promoted a decrease in both the cardiac index (p<0.001) and mean arterial pressure (p<0.001). These changes were associated with an increase in lactate levels and worsening of oxygen transport variables in both groups (p<0.05). Inhalation of xenon did not cause further worsening of hemodynamics or tissue perfusion markers. CONCLUSIONS: Xenon did not alter hemodynamic stability or tissue perfusion in an experimentally controlled hemorrhagic shock model. However, further studies are necessary to validate this drug in other contexts.

Assuntos

RESUMO

OBJECTIVES: The anesthetic gas xenon is reported to preserve hemodynamic stability during general anesthesia. However, the effects of the gas during shock are unclear. The objective of this study was to evaluate the effect of Xe on hemodynamic stability and tissue perfusion in a canine model of hemorrhagic shock. METHOD: Twenty-six dogs, mechanically ventilated with a fraction of inspired oxygen of 21% and anesthetized with etomidate and vecuronium, were randomized into Xenon (Xe; n = 13) or Control (C; n = 13) groups. Following hemodynamic monitoring, a pressure-driven shock was induced to reach an arterial pressure of 40 mmHg. Hemodynamic data and blood samples were collected prior to bleeding, immediately after bleeding and 5, 20 and 40 minutes following shock. The Xe group was treated with 79% Xe diluted in ambient air, inhaled for 20 minutes after shock. RESULT: The mean bleeding volume was 44 mL.kg-1 in the C group and 40 mL.kg-1 in the Xe group. Hemorrhage promoted a decrease in both the cardiac index (p<0.001) and mean arterial pressure (p<0.001). These changes were associated with an increase in lactate levels and worsening of oxygen transport variables in both groups (p<0.05). Inhalation of xenon did not cause further worsening of hemodynamics or tissue perfusion markers. CONCLUSIONS: Xenon did not alter hemodynamic stability or tissue perfusion in an experimentally controlled hemorrhagic shock model. However, further studies are necessary to validate this drug in other contexts.

Assuntos

Assuntos

RESUMO

In this work, a combined matrix isolation FTIR and theoretical DFT(B3LYP)/6-311++G(d,p) study of 2-furaldehyde dimethylhydrazone (2FDH) was performed. According to calculations, two E and two Z conformers exist, the E forms having considerably lower energy than the Z forms. The absence of relevant sterical hindrance between the two substituents around the CN bond (dimethylamino and 2-furyl) in the E structures and an extended π-p electron delocalization in the hydrazone moiety determines the higher stability of these species relatively to the Z structures. In the lowest energy form (E-AG) the O-C-CN and CN-N-Lp (Lp=lone electron pair of amine nitrogen atom) dihedral angles are predicted by the calculations to be -177.2° and 93.7°, respectively. The weak (NC)-H⋯O hydrogen bond type interaction (H⋯O distance: 252.2 pm) in form E-AG, together with the absence in this form of the destabilizing interaction between the lone electron pairs of the oxygen and nitrogen atoms existing in E-SG, explains its lower energy in comparison with this latter form. Both E-AG and E-SG conformers could be trapped from room temperature gas phase in low temperature argon and xenon matrices. The high E-SG→E-AG energy barrier (>25 kJ mol(-1)) explains that, upon increasing the temperature of the matrices no conformational isomerization could be observed. After irradiation of 2FDH with UV-light at λ>328 and λ>234 nm, two different photochemistries were observed. Irradiation at lower energy (λ>328nm) induced the E-AG→E-SG isomerization. Further irradiation at higher energy (λ>234 nm) led to a quick consumption of 2FDH and production of furan and dimethylisocyanide.

Assuntos

Assuntos

RESUMO

The influence of the spin-Zeeman (SZ) operator in the evaluation of the spin-orbit effect on the nuclear magnetic shielding tensor in the context of the linear response within the elimination of the small component approach is critically discussed. It is shown that such term yields no contribution to the isotropic nuclear magnetic shielding constant, but it may be of great importance in the determination of individual tensor components, and particularly of the tensor anisotropy. In particular, an interesting relation between the SZ and orbital Zeeman contributions to the spin-orbit effect for the case of linear molecules is shown to hold. Numerical examples for the BrH, IH, and XeF(2) molecules are presented which show that, provided the SZ term is taken into account, results of the individual shielding tensor components and the tensor anisotropy are in good agreement with those obtained by other theoretical methods, and particularly by the Dirac-Hartree-Fock approach.

Assuntos

RESUMO

PURPOSE: To analyze, in vitro, the influence of a quartz-tungsten-halogen (QTH) and a plasma arc (PAC) on the degree of conversion and hardness of a composite resin, as well as the heat generated by the units. METHODS: Transbond XT disks were prepared and light-cured for 10, 20 and 30 seconds with a QTH (Curing Light XL 3000) or with a PAC (Apollo 95E) for 1, 2 and 3 seconds. The composite resin polymerization was evaluated by infrared spectrophotometry (FTIR) and Knoop hardness number (KHN). The temperature at the curing tip was evaluated. The results were analyzed using ANOVA and Tukey test (α=0.05). RESULTS: According to FTIR and KHN, the polymerization of the composite resin was statistically higher with the QTH. The temperature obtained with the QTH 20 s (45.44ºC) and 30 s (45.84ºC) was statistically higher than the QTH 10 s (39.90ºC). The PAC 1 s (27.12ºC), 2 s (28.48ºC) and 3 s (29.96ºC) presented the lowest temperature and did not differ statistically among them. CONCLUSION: Transbond XT light-activated for 10, 20 and 30 seconds with the QTH presented higher degree of conversion and hardness in comparison with those obtained with the PAC for 1, 2 and 3 seconds, and the QTH generated more heat than the PAC.

OBJETIVO: Analisar, in vitro, as fontes luminosas Halógena (QTH) e Xenon (PAC) no grau de conversão e dureza de uma resina composta e também o calor gerado por estas unidades. METODOLOGIA: discos com resina Transbond XT foram fotoativados por 10, 20 e 30 segundos com QTH (Curing light XL 3000) ou com PAC (Apollo 95E) por 1, 2 e 3 segundos. A resina composta foi analisada por meio de espectrofotometria infravermelha (FTIR) e pelo teste de dureza Knoop (KHN). A temperatura na ponta dos aparelhos foi também avaliada. Os resultados foram analisados usando ANOVA e Tuckey test (α=0.05). RESULTADOS: Conforme FTIR e KHN a polimerização do compósito foi estatisticamente maior com QTH. A temperatura obtida do QTH com 20 segundos (45,44ºC) foi estatisticamente maior do que com 10 segundos (39,90ºC). O PAC com 1, 2 e 3 segundos apresentou as temperaturas mais baixas e não diferem estatisticamente entre si. CONCLUSÃO: A resina Transbond XT fotoativada por 10, 20 e 30 segundos com QTH apresentou maior grau de conversão e dureza em comparação com PAC por 1, 2 e 3 segundos. O QTH produziu mais calor que o PAC.

Assuntos

Assuntos

RESUMO

The purpose of this study was to evaluate the Knoop hardness of a dual-cured resin-based luting cement irradiated with different light sources as well energy density through a ceramic sample. Three light-curing unit (LCUs) were tested: tungsten halogen light (HAL), light-emitting diode (LED) and xenon plasma-arc (PAC) lamp. Disc-shaped specimens were fabricated from a resin-based cement (Enforce). Three energy doses were used by modifying the irradiance (I) of each LCU and the irradiation time (T): 24 Jcm(-2) (I/2x2T), 24 Jcm(-2) (IxT) and 48 Jcm(-2) (Ix2T). Energy doses were applied through a 2.0-mm-thick ceramic sample (Duceram Plus). Three groups underwent direct irradiation over the resin cement with the different LCUs and a chemically-activated group served as a control. Thirteen groups were tested (n=10). Knoop hardness number (KHN) means were obtained from cross-sectional areas. Two-way ANOVA and the Holm-Sidak method were used for statistical comparisons of activation mode and energy doses (alpha=5%). Application of 48 J.cm(-2) energy dose through the ceramic using LED (50.5+/-2.8) and HAL (50.9+/-3.7) produced significantly higher KHN means (p<0.05) than the control (44.7+/-3.8). LED showed statistically similar performance to HAL. Only HAL showed a relationship between the increase of LCU energy dose and hardness increase.

Assuntos

RESUMO

The aim of this study was to evaluate the effect of different curing methods on the stress generated by the polymerization shrinkage of a restorative composite in two moments: immediately after light exposure and after 5 min. Photoactivation was performed using two different light sources: (1) xenon plasma arc (PAC) light (1,500 mW/cm2 - 3s) and (2) a quartz-tungsten-halogen (QTH) light with three light-curing regimens: continuous exposure (40 s at 800 mW/cm2 - CL); soft-start (10 s at 150 mW/cm2 and 30 s at 800 mW/cm2 - SS) and intermittent light [cycles of 4 s (2 s with light on at 600 mW/cm2 and 2 s of light off), for 80s - IL]. The composite resin was applied between two 5-mm diameter metallic rods, mounted in a servohydraulic machine. The maximum stress was recorded immediately after light exposure (FF) and after 5 min (5F). The results were submitted to ANOVA and Tukey's test (5%). For each method, the results obtained in FF and 5F were, respectively: CL (3.58 and 4.46 MPa); SS (2.99 and 4.36 MPa); IL (3.11 and 4.32 MPa) and PAC (0.72 and 3.27 MPa). The stress generated by the polymerization shrinkage during light exposure can be associated with the photoactivation method used. A significant increase in the stress level was observed during the post-curing period up to 5 min, for all evaluated methods.

Assuntos

RESUMO

The aim of this study was to evaluate the effect of different curing methods on the stress generated by the polymerization shrinkage of a restorative composite in two moments: immediately after light exposure and after 5 min. Photoactivation was performed using two different light sources: (1) xenon plasma arc (PAC) light (1,500 mW/cm2 - 3s) and (2) a quartz-tungsten-halogen (QTH) light with three light-curing regimens: continuous exposure (40 s at 800 mW/cm2 - CL); soft-start (10 s at 150 mW/cm2 and 30 s at 800 mW/cm2 - SS) and intermittent light [cycles of 4 s (2 s with light on at 600 mW/cm2 and 2 s of light off), for 80s - IL]. The composite resin was applied between two 5-mm diameter metallic rods, mounted in a servohydraulic machine. The maximum stress was recorded immediately after light exposure (FF) and after 5 min (5F). The results were submitted to ANOVA and Tukey's test (5 percent). For each method, the results obtained in FF and 5F were, respectively: CL (3.58 and 4.46 MPa); SS (2.99 and 4.36 MPa); IL (3.11 and 4.32 MPa) and PAC (0.72 and 3.27 MPa). The stress generated by the polymerization shrinkage during light exposure can be associated with the photoactivation method used. A significant increase in the stress level was observed during the post-curing period up to 5 min, for all evaluated methods.

Assuntos

RESUMO

AIMS: The aim of this study was to test the influence of different curing protocols on dentin marginal adaptation and the hardness of two composites. METHODS AND MATERIALS: Three light-curing-units (LCUs): Quartz-Tungsten-Halogen (QTH: 541 mW/cm2), Argon-Ion-Laser (AL: 277 mW/cm2), and Plasma-Arc-Curing (PAC: 1818 mW/cm2) and two composites FiltekZ250 (F) and Tetric Ceram HB (TC) were tested. Sixty standardized "vertical-slot-Class II-cavities" were prepared at the mesial surface of bovine incisors and divided into six groups (n=10). Composites were placed using the Single Bond adhesive system and cured in 2 mm increments according to the manufacturers' instructions. After polishing, epoxy replicas were processed for scanning electron microscopy (SEM) marginal adaptation analysis at 500x magnification. The specimens were then sectioned transversally to the dental long axis, embedded in polyester resin, then polished and submitted to the Knoop hardness test at gingival and occlusal portions of the restoration. Data were analyzed using two-way analysis of variance (ANOVA) and Tukey's test (p=0.05). RESULTS: The gap margins ranged between 4.3 to 5.8 microm, and no statistically significant differences were revealed in marginal adaptation for LCUs or for composites (p>0.05). Location influenced hardness (p=0.01). The occlusal portion presented significantly higher KHN than the gingival portion for all composite-LCU combinations. Regardless of the LCU used, TC produced statistically significant lower hardness values (ranging between 82.8 to 110.7 KHN) than F (ranging between 105.9 to 117.3 KHN). CONCLUSIONS: Hardness and gap formation were not dependent on the LCUs tested in this study. Different resin composite was found to be a significant factor with regards to hardness but not gap formation.

Assuntos

RESUMO

In general, human hair is claimed to turn yellower after sun exposure. This is particularly affirmed for white hair. However, quantitative data relating yellowness to hair type and to the radiation wavelength are missing. This work shows results of the effect of full or UVB-filtered radiation of a mercury vapor or a xenon-arc lamp on the yellowness of virgin white, dark-brown, blond and red hair. All hair types showed a substantial change in yellowness after irradiation, which is dependent on the hair type and radiation wavelength. Surprisingly, white hair turns less yellow after both full and UVB-filtered radiation exposure. This effect is more pronounced when UVB is filtered from the radiation system. The only radiation that shows a photo-yellowing effect on white hair is infrared. As the yellowness of white hair is commonly related to tryptophan degradation, fluorescence experiments with hair solutions were performed to identify the natural degradation of tryptophan which occurs in hair after light irradiation. Pigmented hairs were also studied, as well as hair treated with a bleaching solution. Although we observe a decrease in tryptophan content of hair after lamp radiation, a direct correlation with hair yellowness was not achieved. Results are discussed in terms of hair type, composition and melanin content.

Assuntos