RESUMO
Tear viscosity is a critical property affecting tear distribution and ocular surface stability. While not widely established as a primary diagnostic marker, deviations from normal viscosity can impact ocular health, potentially contributing to conditions such as dry eye syndrome. Despite their importance, traditional viscometers require sample volumes that are not feasible to use with tear volume. This research introduces a novel Quartz Crystal Microbalance (QCM)-based method for tear viscosity measurement, offering a viscometer prototype that operates with minimal sample volumes. Human tear samples, solutions used in artificial eye drops, and various commercial eye drop brands were evaluated. Results show that the QCM method aligns with established viscosity ranges. The average viscosity of healthy human tears was found to be 1.73 ± 0.61 cP, aligning with the typical range of 1-10 cP. Variability in the viscosities of eye drop can be attributed to differences in their chemical compositions. The QCM method offers benefits such as reduced sample consumption and rapid results, enhancing understanding of tear dynamics for ocular health. Further research with larger sample sizes is needed to establish normative viscosity values in healthy individuals and those with dry eye syndrome, which is crucial for validating the device's clinical efficacy.
Assuntos
Técnicas de Microbalança de Cristal de Quartzo , Lágrimas , Viscosidade , Lágrimas/química , Técnicas de Microbalança de Cristal de Quartzo/instrumentação , Técnicas de Microbalança de Cristal de Quartzo/métodos , Humanos , Soluções Oftálmicas/química , Síndromes do Olho SecoRESUMO
Low-cost piezoelectric devices, such as simple frequency monitoring quartz crystal microbalance (QCM) devices, have good clinical utility as fast diagnostic tools for the detection of several diseases. However, unspecific antigen recognition, poor molecular probe adsorption and the need for sample dilution are still common drawbacks that hinder their use in routine diagnosis. In this work, piezoelectric sensors were previously coated with thin films of bacterial cellulose nanocrystals (CN) to provide a more sensitive and adapted interface for the attachment of monoclonal immunoglobulin G (IgGNS1) and to favor specific detection of non-structural protein 1 (NS1) of dengue fever. The assembly of the immunochip surface was analyzed by atomic force microscopy (AFM) and the NS1 detection was followed by quartz crystal microbalance with (QCM-D) and without energy dissipation monitoring (QCM). The CN surface was able to immobilize 2.30±0.5mgm-2 of IgGNS1, as confirmed by AFM topography and phase images along with QCM-D. The system was able to detect the NS1 protein in serum with only 10-fold dilution in the range of 0.01-10µgmL-1 by both QCM and QCM-D. The limits of detection of the two devices were 0.1µgmL-1 for QCM-D and 0.32µgmL-1 for QCM. As a result, QCM-D and QCM apparatuses can be used to follow NS1 recognition and have good potential for more sensitive, fast and/or less expensive diagnostic assays for dengue.
Assuntos
Vírus da Dengue/isolamento & purificação , Dengue/diagnóstico , Nanopartículas/química , Polissacarídeos Bacterianos/química , Técnicas de Microbalança de Cristal de Quartzo/instrumentação , Proteínas não Estruturais Virais/sangue , Anticorpos Imobilizados/química , Bactérias/química , Técnicas Biossensoriais/instrumentação , Celulose/química , Dengue/sangue , Dengue/virologia , Desenho de Equipamento , Humanos , Imunoensaio/instrumentação , Dispositivos Lab-On-A-Chip , Nanopartículas/ultraestrutura , Proteínas não Estruturais Virais/análiseRESUMO
Photocured dental resins are used extensively in restorative procedures in dentistry. Inadequate curing reduces the lifetime of the dental restoration, and consequently it is essential to precisely measure the polymerisation kinetics. In this study, two techniques, Quartz Crystal Microbalance (QCM) and Photoacoustic Spectroscopy (PAS), were used to monitor the real-time cure and to obtain the optical absorption spectra of resins, respectively. From the PAS measurements, the precise peaks of absorption were identified, and were used as the appropriate wavelength of the photocuring light in the QCM monitoring. The combined use of these techniques allows reliable determination of the duration of the phases of physical and chemical changes that occur during photocuring. Two commercial dental resins were tested, and the results confirmed the advantages of using PAS and QCM to study polymerisation kinetics.