RESUMO

The giant anteater is one of the species classified as vulnerable to extinction. Burning and being run over are among important causes in the decrease of individuals of this species and a better knowledge of the anatomy of these animals can contribute to the treatment of injured animals and their restoration to the environment. Thus, the objective of this work was to describe aspects of the anatomy of the muscles of the forearm of M. tridactyla. For this purpose, six adult specimens were used, three females and three males. The corpses were fixed with a 10% formaldehyde solution and preserved in vats containing the same solution. The thoracic limbs were dissected by routine dissection techniques. The forearm muscles of M. tridactyla were: brachioradialis; radial carpal extensor; common finger extensor; lateral finger extensor, ulnar carpal extensor; finger extensor I and II; long abductor of finger I; supinator, radial carpal flexor; ulnar flexor of the carpus, superficial flexor of the fingers, deep flexor of the fingers, pronator teres and square pronator, which were innervated by the radial, ulnar and median nerves. These muscles give a large volume to the forearm, are robust and have highly developed tendons, especially those involved with the flexion of the carpus, digits and elbow, actions that are fundamental to your defense habits and search for food.

O tamanduá-bandeira é uma das espécies classificadas em condição vulnerável à extinção. Queimadas e atropela-mentos estão entre causas importantes na diminuição de indivíduos desta espécie e um melhor conhecimento da anatomia des-tes animais pode contribuir para o tratamento de animais feridos e seu reestabelecimento ao meio ambiente. Assim, oobjetivo deste estudo foi descrever os aspectos da anatomia do antebraço do M. tridactyla. Para tanto, foram utilizados seis exemplares adultos, sendo três fêmeas e três machos. Os cadáveres foram fixados com solução aquosa de aldeído fórmico 10% e preser-vados em cubas contendo a mesma solução. Os membros torácicos foram dissecados pelas técnicas rotineiras de dissecação para evidenciação dos músculos, vasos e nervos da região. Os músculos do antebraço do M. tridactyla foram: braquiorradial; extensor radial do carpo; extensor comum dos dedos; extensor lateral dos dedos, extensor ulnar do carpo; extensor dos dedos I e II; abdutor longo do dedo I; supinador, flexor radial do carpo; flexor ulnar do carpo, flexor superficial dos dedos, flexor profundo dos dedos, pronador redondo e pronador quadrado. Estes músculos foram inervados pelos nervos ulnar e mediano. Juntos estes músculos conferem um grande volume ao antebraço, e suas características apontam para uma poderosa capaci-dade de exercer a flexão do carpo e dos dígitos, e ainda contribuir com os músculos do braço para a flexão do cotovelo, ações estas fundamentais aos seus hábitos de defesa e busca por alimento.

Assuntos

RESUMO

The giant anteater is one of the species classified as vulnerable to extinction. Burning and being run over are among important causes in the decrease of individuals of this species and a better knowledge of the anatomy of these animals can contribute to the treatment of injured animals and their restoration to the environment. Thus, the objective of this work was to describe aspects of the anatomy of the muscles of the forearm of M. tridactyla. For this purpose, six adult specimens were used, three females and three males. The corpses were fixed with a 10% formaldehyde solution and preserved in vats containing the same solution. The thoracic limbs were dissected by routine dissection techniques. The forearm muscles of M. tridactyla were: brachioradialis; radial carpal extensor; common finger extensor; lateral finger extensor, ulnar carpal extensor; finger extensor I and II; long abductor of finger I; supinator, radial carpal flexor; ulnar flexor of the carpus, superficial flexor of the fingers, deep flexor of the fingers, pronator teres and square pronator, which were innervated by the radial, ulnar and median nerves. These muscles give a large volume to the forearm, are robust and have highly developed tendons, especially those involved with the flexion of the carpus, digits and elbow, actions that are fundamental to your defense habits and search for food.(AU)

O tamanduá-bandeira é uma das espécies classificadas em condição vulnerável à extinção. Queimadas e atropela-mentos estão entre causas importantes na diminuição de indivíduos desta espécie e um melhor conhecimento da anatomia des-tes animais pode contribuir para o tratamento de animais feridos e seu reestabelecimento ao meio ambiente. Assim, oobjetivo deste estudo foi descrever os aspectos da anatomia do antebraço do M. tridactyla. Para tanto, foram utilizados seis exemplares adultos, sendo três fêmeas e três machos. Os cadáveres foram fixados com solução aquosa de aldeído fórmico 10% e preser-vados em cubas contendo a mesma solução. Os membros torácicos foram dissecados pelas técnicas rotineiras de dissecação para evidenciação dos músculos, vasos e nervos da região. Os músculos do antebraço do M. tridactyla foram: braquiorradial; extensor radial do carpo; extensor comum dos dedos; extensor lateral dos dedos, extensor ulnar do carpo; extensor dos dedos I e II; abdutor longo do dedo I; supinador, flexor radial do carpo; flexor ulnar do carpo, flexor superficial dos dedos, flexor profundo dos dedos, pronador redondo e pronador quadrado. Estes músculos foram inervados pelos nervos ulnar e mediano. Juntos estes músculos conferem um grande volume ao antebraço, e suas características apontam para uma poderosa capaci-dade de exercer a flexão do carpo e dos dígitos, e ainda contribuir com os músculos do braço para a flexão do cotovelo, ações estas fundamentais aos seus hábitos de defesa e busca por alimento.(AU)

Assuntos

RESUMO

The aim of this work was to study the sexual dimorphism of the occlusal surface of the maxillary postcanine dentition using geometric morphometric techniques. This study evaluated 139 individuals as part of five osteological collections from municipal cemeteries in the province of Granada (Spain). The landmarks and semilandmarks were analysed by principal components analysis, canonical variate analysis and discriminant analysis. Only the fourth maxillary premolar showed significant sexual dimorphism; however, cross-validation values for shape variables were 64.44% for males and 63.60% for females and 60.17% for males and 60.99% for females when both shape and size variables were considered. The third maxillary premolar and first and second maxillary molars did not show significant sexual dimorphism. The results show that maxillary postcanine dentition cannot assist in sex estimation, either only shape or shape and size.

Assuntos

RESUMO

Objective: Impulsiveness has been the subject of much research, but little is known about the possible relationship between craniofacial anatomy and impulsiveness. The present study was designed to investigate the relationship between one aspect of craniofacial structure (the angle of inclination of the forehead) and impulsiveness. Method: Photographs in profile were obtained from 131 volunteers who had been fined for driving at high speed and were undergoing a court-mandated driving license point-recovery course. They completed the Barratt Impulsiveness Scale (BIS-11), the Impulsive Behavior Scale (UPPS-P), and Zuckerman's Sensation Seeking Scale (V). The angle of the slant of the forehead was measured with a photographic support and a protractor. Results: High positive concordance was found between forehead inclination and 14 out of the 15 impulsiveness factors studied. Conclusions: The angle of inclination of the forehead was significantly associated with self-reported impulsiveness in this sample of traffic violators.

Assuntos

RESUMO

OBJECTIVE: Impulsiveness has been the subject of much research, but little is known about the possible relationship between craniofacial anatomy and impulsiveness. The present study was designed to investigate the relationship between one aspect of craniofacial structure (the angle of inclination of the forehead) and impulsiveness. METHOD: Photographs in profile were obtained from 131 volunteers who had been fined for driving at high speed and were undergoing a court-mandated driving license point-recovery course. They completed the Barratt Impulsiveness Scale (BIS-11), the Impulsive Behavior Scale (UPPS-P), and Zuckerman's Sensation Seeking Scale (V). The angle of the slant of the forehead was measured with a photographic support and a protractor. RESULTS: High positive concordance was found between forehead inclination and 14 out of the 15 impulsiveness factors studied. CONCLUSIONS: The angle of inclination of the forehead was significantly associated with self-reported impulsiveness in this sample of traffic violators.

Assuntos

RESUMO

OBJECTIVE:: The aim of this randomized clinical trial was to evaluate the dental, dentoalveolar, and skeletal changes occurring right after the rapid maxillary expansion (RME) and slow maxillary expansion (SME) treatment using Haas-type expander. METHODS:: All subjects performed cone-beam computed tomography (CBCT) before installation of expanders (T1) and right after screw stabilization (T2). Patients who did not follow the research parameters were excluded. The final sample resulted in 21 patients in RME group (mean age of 8.43 years) and 16 patients in SME group (mean age of 8.70 years). Based on the skewness and kurtosis statistics, the variables were judged to be normally distributed and paired t-test and student t-test were performed at significance level of 5%. RESULTS:: Intermolar angle changed significantly due to treatment and RME showed greater buccal tipping than SME. RME showed significant changes in other four measurements due to treatment: maxilla moved forward and mandible showed backward rotation and, at transversal level both skeletal and dentoalveolar showed significant changes due to maxillary expansion. SME showed significant dentoalveolar changes due to maxillary expansion. CONCLUSIONS:: Only intermolar angle showed significant difference between the two modalities of maxillary expansion with greater buccal tipping for RME. Also, RME produced skeletal maxillary expansion and SME did not. Both maxillary expansion modalities were efficient to promote transversal gain at dentoalveolar level. Sagittal and vertical measurements did not show differences between groups, but RME promoted a forward movement of the maxilla and backward rotation of the mandible.

Assuntos

RESUMO

ABSTRACT OBJECTIVE: The aim of this randomized clinical trial was to evaluate the dental, dentoalveolar, and skeletal changes occurring right after the rapid maxillary expansion (RME) and slow maxillary expansion (SME) treatment using Haas-type expander. METHODS: All subjects performed cone-beam computed tomography (CBCT) before installation of expanders (T1) and right after screw stabilization (T2). Patients who did not follow the research parameters were excluded. The final sample resulted in 21 patients in RME group (mean age of 8.43 years) and 16 patients in SME group (mean age of 8.70 years). Based on the skewness and kurtosis statistics, the variables were judged to be normally distributed and paired t-test and student t-test were performed at significance level of 5%. RESULTS: Intermolar angle changed significantly due to treatment and RME showed greater buccal tipping than SME. RME showed significant changes in other four measurements due to treatment: maxilla moved forward and mandible showed backward rotation and, at transversal level both skeletal and dentoalveolar showed significant changes due to maxillary expansion. SME showed significant dentoalveolar changes due to maxillary expansion. CONCLUSIONS: Only intermolar angle showed significant difference between the two modalities of maxillary expansion with greater buccal tipping for RME. Also, RME produced skeletal maxillary expansion and SME did not. Both maxillary expansion modalities were efficient to promote transversal gain at dentoalveolar level. Sagittal and vertical measurements did not show differences between groups, but RME promoted a forward movement of the maxilla and backward rotation of the mandible.

RESUMO OBJETIVO: o objetivo do presente ensaio clínico randomizado foi avaliar as transformações dentárias, dentoalveolares e ósseas que ocorrem imediatamente após o tratamento com expansão rápida da maxila (ERM) e lenta (ELM) usando expansores do tipo Haas. MÉTODOS: todos os indivíduos foram submetidos a tomografias computadorizadas de feixe cônico (TCFC) antes da colocação dos expansores (T1) e imediatamente após a estabilização do parafuso (T2). Os pacientes que não seguiram os parâmetros da pesquisa foram excluídos. A amostra final constou de 21 pacientes no grupo ERM (idade média de 8,43 anos) e 16 no grupo ELM (idade média de 8,7 anos). Com base em estatística de assimetria e curtose, as variáveis foram consideradas de distribuição normal, e os testes t pareado e t de Student foram realizados, com nível de significância de 5%. RESULTADOS: o ângulo intermolares mudou significativamente devido ao tratamento, e o grupo ERM apresentou maior inclinação vestibular do que o grupo ELM. O grupo ERM mostrou alterações significativas em outras quatro medidas devido ao tratamento: a maxila apresentou deslocamento anterior e a mandíbula, rotação posterior; no nível transversal, houve tanto alterações ósseas quanto dentoalveolares significativas, devido à expansão maxilar. O grupo ELM apresentou alterações significativas devido à expansão maxilar. CONCLUSÕES: apenas o ângulo intermolares apresentou diferença significativa entre as duas modalidades de expansão maxilar, com maior inclinação vestibular no grupo ERM. A ERM resultou, também, em expansão maxilar óssea, ao contrário da ELM. As duas modalidades de expansão maxilar promoveram, de forma eficiente, um ganho transversal em nível dentoalveolar. As medidas sagitais e verticais não apresentaram diferenças entre os grupos, mas a ERM promoveu o deslocamento anterior da maxila e a rotação posterior da mandíbula.

Assuntos

RESUMO

Background: Diseases of the orbit represent a surgical challenge, particularly those compromising the orbital apex. Optimal surgical access should provide the best possible exposure, allowing to identify certain key anatomical structures, called landmarks. Objective: Describe the endoscopic anatomy of the structural unit formed by the Inferior Orbital Fissure (IOF) and the Müller's muscle (MM) at the orbital apex (OA), thus generating a new endoscopic anatomical landmark. Materials and methods: A bone-descriptive analysis of the IOF in dry craniums, was followed by dissection and endoscopic study of six heads (twelve sides), colored and fixed in formaldehyde. In ten dry craniums (twenty sides), distances and angles of OA foramina were measured (optic foramen [OF] and foramen rotundum [FR]). Statistical analysis was performed with SPSS 17.0 statistical software (SPSS, Inc. Chicago, IL). Results: The structural unit IOF-MM was identified in all endoscopic dissections, verifying its intimate relationship with the OA. From the morpho-metric standpoint, OF and FR were found at an average distance of 65.19 mm and 60.16 mm, respectively. The average angle of the OF was 13.32 degrees, whereas the one for FR was 19.31 degrees. We found a significant correlation between OF and FR only on the left side (left hemi-crane) (Kendall Tau b 0.69, p=0.006). There were no anatomical or morphological differences between both sides. Conclusion: The unit IOF-MM is a constant anatomical landmark, useful and safe under endoscopic technique, which allows the recognition of the OA and its contiguous areas.

Antecedentes: Las enfermedades que afectan la órbita representan un desafío quirúrgico, en particular las que comprometen el ápex orbitario. Una vía óptima de acceso quirúrgico proporciona la mejor exposición permitiendo identificar ciertas estructuras anatómicas claves llamadas reparos anatómicos Objetivo: Describir la anatomía endoscópica de la unidad estructural Fisura Orbitaria Inferior / Músculo de Müller a nivel del ápex orbitario generando así un nuevo reparo anatómico endoscópico. Material y método: Análisis descriptivo óseo de la fisura orbitaria inferior (FOI) en cráneos secos, disección y estudio bajo técnica endoscópica de 6 cabezas fijadas en formol y coloreadas; finalmente se tomaron distancias y ángulos a forámenes relacionados con el ápex orbitario a 10 cráneos secos. El análisis estadístico se realizó con el programa estadístico SPSS 17,0 (SPSS, Inc., Chicago, IL). Resultado: En todas las disecciones endoscópicas se pudo identificar la unidad fisura orbitaria inferior-músculo de Müller y también verificar su íntima relación con el ápex orbitario. Morfométricamente el foramen óptico y el foramen redondo mayor están a una distancia promedio de 65.19mm y 60.16mm respectivamente. Los ángulos promedio del FO fue de 13.32 grados y del FRM de19.31 grados. Hallamos correlación significativa entre CO. y el FRM sólo en el hemicráneo izquierdo, (Tau b de Kendall 0.69, P=0.006). No se encontraron diferencias anatómicas (o morfológicas) significativas entre lados. Conclusión: bajo técnica endoscópica la unidad Fisura Orbitaria Inferior-Músculo de Müller (FOI-MM) es un reparo anatómico constante, útil y seguro que permite el reconocimiento del ápex orbitario y sus áreas contiguas.

Assuntos

RESUMO

BACKGROUND: A plaster dental model is a patient's traditional three-dimensional (3D) record. If the dental crowns from a plaster model are separated and positioned in wax, this setup of the crowns can be used to simulate orthodontic treatment. The traditional way to make this dental setup requires significant time by the orthodontist and in the orthodontic lab. New developments in dentistry and orthodontics include the possibility of virtual setups. AIM: In this article, the differences between conventional setups with plaster models and virtual setups are discussed. METHODS: A clinical patient is described for whom two different setups were made and compared by model superimposition with Geomagic Qualify software. RESULTS: According to the literature and the results from this study, virtual setups and conventional setups with plaster models are equally accurate. CONCLUSION: Virtual setups present several advantages, e.g., digital storage, digital models cannot be damaged, the same model can undergo several treatment simulations, and communication between dental and surgical professionals and between dental professionals and patients is facilitated. Despite these advantages, considerable time and training are needed for dental professionals to master and adopt the general use of digital models and virtual setups in dentistry.

Assuntos

RESUMO

OBJECTIVES: One of the biggest challenges in the study of complex morphologies is to adequately describe shape variation. Here, we assess how the random sampling of surface points automatically obtained performs, when compared with observer-guided sampling procedures, and also evaluate the effect of sliding surface points by bending energy and minimum Procrustes distance. MATERIAL AND METHODS: Three datasets comprising structures with disparate levels of complexity and intrasample variation are as follows: mouse molars, mouse brains, and primate endocasts. Different configurations of 3D coordinates on curves and surfaces were digitized from MRI images and CT scans using semi and fully automated procedures. Shape variables were obtained by Generalized Procrustes Superpositions before and after sliding the pseudolandmarks. Multivariate analyses were used to summarize and compare shape variation. RESULTS: For the primate endocast, the semiautomated and automated strategies yield similar ordinations of specimens. Conversely, the semiautomated strategy better discriminates molar shapes between mouse groups. Shape differences among specimens are not adequately represented by the PCs calculated with surface pseudolandmarks. This is improved when the points are converted into semilandmarks by a sliding criterion. DISCUSSION: Surface semilandmarks automatically obtained from 3D models are promising although they should be used with some caution in complex structures. This approach can be taken as complementary of semiautomated procedures which perform better for assessing shape variation in localized traits previously selected while automated procedures are suitable in studies aimed at comparing overall variation in shape and when there is no previous information about highly variable anatomical regions.

Assuntos

RESUMO

ABSTRACTThe central sulcus region is an eloquent area situated between the frontal and parietal lobes. During neurosurgical procedures, it is sometimes difficult to understand the cortical anatomy of this region.Objective Find alternative ways to anatomically navigate in this region during neurosurgical procedures.Method We analyzed eighty two human hemispheres using a surgical microscope and completed a review of the literature about central sulcus region.Results In 68/82 hemispheres, the central sulcus did not reach the posterior ramus of the lateral sulcus. A knob on the second curve of the precentral gyrus was reliably identified in only 64/82 hemispheres.Conclusion The morphometric data presented in this article can be useful as supplementary method to identify the central sulcus region landmarks.

RESUMOA região do sulco central é uma área eloquente posicionada entre os lobos frontal e parietal. Durante procedimentos neurocirúrgicos, em algumas ocasiões, torna-se difícil compreender a anatomia cortical desta região.Objetivo Encontrar métodos alternativos para uma navegaçāo anatômica desta regiāo durante procedimentos neurocirúrgicos.Método Analisamos oitenta e dois hemisférios humanos usando um microscópio cirúrgico, além de fazer uma revisão da literatura.Resultados Em 68/82 hemisférios, o sulco central não atingiu o ramo posterior do sulco lateral. Uma dilatação na segunda curva do giro precentral foi encontrada em apenas 64/82 hemisférios.Conclusão Os dados morfométricos apresentados neste artigo podem ser úteis como método suplementar para identificação dos reparos anatômicos na região do sulco central.

Assuntos

RESUMO

The central sulcus region is an eloquent area situated between the frontal and parietal lobes. During neurosurgical procedures, it is sometimes difficult to understand the cortical anatomy of this region.Objective Find alternative ways to anatomically navigate in this region during neurosurgical procedures.Method We analyzed eighty two human hemispheres using a surgical microscope and completed a review of the literature about central sulcus region.Results In 68/82 hemispheres, the central sulcus did not reach the posterior ramus of the lateral sulcus. A knob on the second curve of the precentral gyrus was reliably identified in only 64/82 hemispheres.Conclusion The morphometric data presented in this article can be useful as supplementary method to identify the central sulcus region landmarks.

Assuntos

RESUMO

PURPOSE: To determine the limitations of the photographs used to obtain the anthropometric measurements of the breast region. METHODS: Five women, between the ages of 18 to 60 years, were evaluated. Photographs of the frontal and left and right profile views of their breasts were taken. Based on the current literature, the most commonly used anthropometric and anatomic landmarks for breast measurement were marked in their different positions. The different points were used to evaluate if the direct anthropometry was possible in a standardized way and determine how the points and the positions can to be used in any breast measurements. RESULTS: There were some limitations to the use of defining points of the breast fold, as well as of its lower portion and lateral extension positions in both profiles. CONCLUSION: The defining points of the breast fold and the profile photographs have some limitations and we suggested how the points and positions can be used for breasts measurements.

Assuntos

RESUMO

PURPOSE: To determine the limitations of the photographs used to obtain the anthropometric measurements of the breast region. METHODS: Five women, between the ages of 18 to 60 years, were evaluated. Photographs of the frontal and left and right profile views of their breasts were taken. Based on the current literature, the most commonly used anthropometric and anatomic landmarks for breast measurement were marked in their different positions. The different points were used to evaluate if the direct anthropometry was possible in a standardized way and determine how the points and the positions can to be used in any breast measurements. RESULTS: There were some limitations to the use of defining points of the breast fold, as well as of its lower portion and lateral extension positions in both profiles. CONCLUSION: The defining points of the breast fold and the profile photographs have some limitations and we suggested how the points and positions can be used for breasts measurements. .

Assuntos

RESUMO

Foramen ovale is a surgically important aperture of the skull since it allows approach to and manipulation of the trigeminal ganglion as it lies in the Meckel's cave. This transfacial approach, Hartel's approach, requires two anatomical points for accurate cannulation; the zygomatic point and the pupil point. This study describes the morphology and location of foramen ovale and describes the pupil point in relation to the medial canthus in the Kenyan population. Department of Human Anatomy departmental review board approved the study. Two hundred dry skulls from the Department of Human Anatomy were studied using a digital calliper with help of a measuring frame. The results were analysed using SPSS version 20. The results showed the length and width of right foramen ovale was 7.69 mm mean (SD ±1.31) and 4.24 mm (±0.64) respectively while the left foramen ovale was 7.68 mm (±1.23) and 4.28 mm (±0.74). The distance of the zygomatic point from the external auditory meatus on the right was 23.54 mm (±2.26) and the left was 23.49 mm (±2.16). The median distances of the pupil point in relation to the medial canthus was 9.5mm on the right and 8.1 mm on the left. These results were significantly different from other population data. Neuronavigational aids to foramen ovale in Kenyans should take this into consideration.

El foramen oval es una abertura quirúrgicamente importante del cráneo, que permite el enfoque y manipulación del ganglio trigeminal ya que se encuentra en la impresión trigeminal (fosita de Meckel). Este enfoque transfacial, el enfoque de Hartel, requiere dos puntos anatómicos para la canalización precisa; el punto cigomático y el punto de la pupila. Este estudio describe la morfología y la ubicación del foramen oval, y el punto pupilar en relación al canto medial en la población de Kenia. La junta directiva del Departamento de Anatomía Humana aprobó el estudio. Doscientos cráneos secos procedentes del Departamento de Anatomía Humana se estudiaron utilizando un caliper digital con ayuda de un marco de medición. Los resultados fueron analizados mediante el programa SPSS versión 20. Los resultados mostraron que la longitud y ancho del foramen oval derecho fue de 7,69 mm media (±1,31) y 4,24 mm (±0,64), respectivamente, mientras que el foramen oval izquierdoo fue de 7,68 mm (±1,23) y 4,28 mm (±0,74). La distancia del punto cigomático desde el meato acústico externo derecho fue 23,54 mm (±2,26) y el izquierdo de 23,49 mm (±2,16). Las distancias promedios del punto de la pupila en relación con el canto medial fueron de 9,5 mm (el derecha) y 8,1 mm (el izquierdo). Estos resultados fueron significativamente diferentes de otros datos demográficos. El apoyo para la neuronavegación para acceder al foramen oval en kenianos debe tener esto en consideración.

Assuntos

RESUMO

The purpose of this study was to determine the localization of the asterion according to the anatomical landmarks of posterior cranial fossa and its relation with sinuses for posterolateral surgical approaches in newborns. On 70 head-halves, a needle about 2 mm with diameter was placed on the centre point of asterion (posterolateral fontanel) by inserting into the whole cranial bony tissue by forming an right angle with the bony surface. Various localizations of asterion and its measurements from the internal and external anatomical landmarks were investigated on term neonatal cadavers. The localization of asterion was found as on the sigmoid-transverse sinus junction (STJ) (5., 6., 7., 8. squares) in 40% of cases on right side and in 34%, on left side. Additionally, it was located below the STJ (9., 10., 11., 12. squares) in 60% of cases, on right side and in 63% of cases on left side. We determined that the most frequent localization of asterion as the 11. square both for the right and left sides 12 (34%) cases for the right side and 11 (31,4%) cases for the left side. The asterion was not located on 1., 2., 3., 4., 5. and 12. squares on right side and 1., 3., 4., 8. and 9. squares on left side. It has been found that the region of asterion has an average distance value of 19.9 mm to internal acoustic meatus (MI), 31.7 mm to posterior clinoid process (PC), 34.4 to dorsum sellae (DS), 19.2 mm to jugular foramen (FJ), 23.0 mm to hypoglossal canal (HC), internally. The distance of asterion as 28.8 mm to zygoma root (ZR) and 22.3 mm to Henle's spine (HS) and 15.8 mm to mastoid tip (MT) and 35.9 mm to external occipital protuberance (PE) were observed. By the guide of point asterion on newborns the area of 1cm2 on this point which was placed on superior 4 squares of our scale diagram is suggested as a safe area of placement of first burr hole to avoid from the risk of bleeding of sigmoid and transverse sinuses on craniotomies of posterior fossa.

El propósito de este estudio fue determinar la localización del asterion de acuerdo con los puntos anatómicos de la fosa craneal posterior y su relación con los senos de abordajes quirúrgicos posterolaterales en los recién nacidos. Fueron utilizadas 70 hemicabezas y se colocó una aguja de alrededor de 2 mm de diámetro en el punto central del asterion (fontanela posterolateral) en todo el tejido óseo craneal produciéndose la formación de un ángulo recto con la superficie ósea. La localización del asterion y las mediciones de los puntos de referencia anatómicos internos y externos fueron investigados en cadáveres de neonatos a término. La localización del asterion se encontró en la unión sinusal transverso sigmoide (STJ) (cuadrados 5., 6., 7., 8.) en el 40% de los casos en el lado derecho y en el 34%, en el lado izquierdo. Además, se encontró por debajo del STJ (cuadrados 9., 10., 11., 12.) en un 60% de los casos en el lado derecho y en el 63% de los casos en el lado izquierdo. Se determinó que la localización más frecuente del asterion fue 11., tanto para los lados derecho e izquierdo, 12 casos (34%) para el lado derecho y 11 casos (31,4%) para el lado izquierdo. El asterion no se encuentra en los cuadrados 1., 2., 3., 4., 5. y 12. del lado derecho y 1., 3., 4., 8. y 9. del lado izquierdo. Se determinó que la región del asterion tiene una distancia promedio de 19,9 mm al meato acústico interno, 31,7 mm al proceso clinoides posterior, 34,4 mm al dorso selar, 19,2 mm al foramen yugular y 23,0 mm al canal hipogloso, internamente. La distancia del asterion a la raíz del hueso cigomático fue 28,8 mm y 22,3 mm a la columna vertebral, siendo de 15,8 mm al proceso mastoides y 35,9 mm a la protuberancia occipital externa. En los recién nacidos, se sugiere un área de 1cm2 y se colocan en 4 casillas superiores de nuestro diagrama a escala, como una zona segura para la realización de la primera trepanación para evitar el riesgo de sangrado de los senos sigmoide y transverso en craneotomías de fosa posterior.

Assuntos

RESUMO

OBJECTIVE: The aim of the present study was to assess the diagnostic value of a laser scanner developed to determine the coordinates of clinical bracket points and to compare with the results of a coordinate measuring machine (CMM). METHODS: This diagnostic experimental study was conducted on maxillary and mandibular orthodontic study casts of 18 adults with normal Class I occlusion. First, the coordinates of the bracket points were measured on all casts by a CMM. Then, the three-dimensional coordinates (X, Y, Z) of the bracket points were measured on the same casts by a 3D laser scanner designed at Shahid Beheshti University, Tehran, Iran. The validity and reliability of each system were assessed by means of intraclass correlation coefficient (ICC) and Dahlberg's formula. RESULTS: The difference between the mean dimension and the actual value for the CMM was 0.0066 mm. (95% CI: 69.98340, 69.99140). The mean difference for the laser scanner was 0.107 ± 0.133 mm (95% CI: -0.002, 0.24). In each method, differences were not significant. The ICC comparing the two methods was 0.998 for the X coordinate, and 0.996 for the Y coordinate; the mean difference for coordinates recorded in the entire arch and for each tooth was 0.616 mm. CONCLUSION: The accuracy of clinical bracket point coordinates measured by the laser scanner was equal to that of CMM. The mean difference in measurements was within the range of operator errors.

Assuntos

RESUMO

El objetivo de este trabajo fue evaluar el desplazamiento de los puntos craneales: Nasion, Silla, Basion, Porion, Orbitario y Pterigoideo, utilizados como referencia en los análisis cefalométricos de Jarabak y Ricketts durante el crecimiento activo. Se seleccionaron 120 telerradiografías de perfil en formato digital, correspondientes a 60 pacientes con 2 telerradiografías cada uno, tomadas con un intervalo de tiempo mínimo de 1 año (T1 y T2), en donde T1 se encuentra antes o durante el peak de crecimiento según el Estado de Maduración Cervical Vertebral (CVM) I, II ó III de Baccetti y T2 en estadio CVM IV,V,VI (después del peak de crecimiento). Un examinador previamente calibrado, ubicó los puntos analizados y para evaluar su desplazamiento, se realizaron mediciones en T1 y T2 (3 variables para cada punto), usando como referencia 2 planos que no se modifican a partir de los 5 años de edad (LCB y Vert-T). Para determinar el desplazamiento de los puntos, se calculó la variación promedio observada entre T1 y T2 y se realizó la prueba t para muestras pareadas o Wilcoxon (según distribución) para determinar la existencia de diferencias significativas. Además, se comparó la muestra por sexo, CVM inicial y CVM final. Se encontraron variaciones entre T1 y T2 en todas las medidas, aunque sólo en 5 de ellas se encontraron diferencias significativas; no se encontró diferencias al comparar por sexo, CVM inicial y final. Es así como podemos concluir que todos los puntos craneales analizados sufren desplazamiento durante el crecimiento. Los puntos Basion y Orbitario son los que sufren mayor desplazamiento. Es necesario analizar las implicancias de estas variaciones en los resultados obtenidos de los análisis cefalométrico y evaluar la necesidad de utilizar puntos de referencia alternativos.

The objective of this study was to evaluate the displacement of cranial reference points: Nasion, Sella, Basion, Porion, Orbitale and Pterygomaxillary, used in Jarabak and Ricketts cephalometric analysis, during active growth. Hundred and twenty digitalized lateral telerradiographies, corresponding to 60 patients (2 teleradiographies each one), were collected. The radiographies were taken with a minimum interval of one year between them (T1 and T2), where T1 is taken before or during the pubertal growth peack according to the cervical vertebral maturation stages developed by baccetti (CVM) I, II or III and T2 in CVM IV,V,VI (after the growth peak). Then, a previously calibrated examinator marked reference points and cephalometric measurements were taken (2 variables for each landmark). Measurements were made using craniofacial stable structures as references (stable basicranial line and Vertical T). To detect displacement in the landmark positions, t test or Wilcoxon test according to the distribution of each variable, was used to compare the data between T1 and T2. Also, comparisons were made by sex, and by initial and final CVM. All of the variables have variations between T1 y T2, but only 5 have a statistically significant difference. There were no differences between sexes and at initial and final CVM. In conclusion, all of the reference landmarks analyzed had displacement during active growth. Point Basion and Orbitale suffered the largest displacement. It is necessary to analyze the clinical implications of this displacement in order to evaluate the convenience of using alternative reference landmarks.

Assuntos

RESUMO

OBJECTIVE: To establish preoperatively the localization of the cortical projection of the inferior choroidal point (ICP) and use it as a reliable landmark when approaching the temporal horn through a middle temporal gyrus access. To review relevant anatomical features regarding selective amigdalohippocampectomy (AH) for treatment of mesial temporal lobe epilepsy (MTLE). METHOD: The cortical projection of the inferior choroidal point was used in more than 300 surgeries by one authors as a reliable landmark to reach the temporal horn. In the laboratory, forty cerebral hemispheres were examined. CONCLUSION: The cortical projection of the ICP is a reliable landmark for reaching the temporal horn.

Assuntos

RESUMO

INTRODUCTION: Technological advances in Dentistry have emerged primarily in the area of diagnostic tools. One example is the 3D scanner, which can transform plaster models into three-dimensional digital models. OBJECTIVE: This study aimed to assess the reliability of tooth size-arch length discrepancy analysis measurements performed on three-dimensional digital models, and compare these measurements with those obtained from plaster models. MATERIAL AND METHODS: To this end, plaster models of lower dental arches and their corresponding three-dimensional digital models acquired with a 3Shape R700T scanner were used. All of them had lower permanent dentition. Four different tooth size-arch length discrepancy calculations were performed on each model, two of which by manual methods using calipers and brass wire, and two by digital methods using linear measurements and parabolas. RESULTS: Data were statistically assessed using Friedman test and no statistically significant differences were found between the two methods (P > 0.05), except for values found by the linear digital method which revealed a slight, non-significant statistical difference. CONCLUSIONS: Based on the results, it is reasonable to assert that any of these resources used by orthodontists to clinically assess tooth size-arch length discrepancy can be considered reliable.

Assuntos