RESUMO

SUMMARY: For treating cruciate ligament injuries, especially for characterizing the mechanics of the tunnel in cruciate ligament reconstruction, correctly understanding the bony information of the attachment area of the cruciate ligaments is significant. We studied 31 knee joints of middle-aged Chinese adults using the P45 sheet plastination technique, focusing on the attachment areas of the cruciate ligaments, especially the bony structures. The trabeculae at the attachment area were distributed radially and extended deep into the medial wall of the lateral condyle of the femur. However, in the anterior part of the intercondylar eminence, the trabeculae of the anterior group were parallelly arranged along the tendinous fibers of the anterior cruciate ligament, while the trabeculae of the posterior group were parallelly arranged along the perpendicular direction of the anterior cruciate ligament fibers. Similarly, at the attachment area of the lateral wall of the medial condyle of the posterior cruciate ligament, the trabeculae extended radially toward the deep medial condyle. Deep in the posterior part of the intercondylar eminence, the trabeculae were arranged longitudinally. In the anterior part of the intercondylar eminence, the trabeculae were parallelly arranged along the perpendicular directions of ligament fibers. The distribution patterns of the trabecular at the attachment areas of the cruciate ligaments at the ends of the femur and tibia were different. This difference should be considered when orthopedic surgeons reconstruct anterior cruciate ligaments.

Para el tratamiento de lesiones de los ligamentos cruzados, especialmente para caracterizar la mecánica del túnel en su reconstrucción, es importante comprender correctamente la información ósea del área de inserción de estos ligamentos. Estudiamos 31 articulaciones de rodilla de individuos chinos, adultos, de mediana edad, utilizando la técnica de plastinación de láminas P45, centrándonos en las áreas de unión de los ligamentos cruzados, especialmente en las estructuras óseas. Las trabéculas en el área de inserción se distribuyeron radialmente y se extendieron profundamente en la pared medial del cóndilo lateral del fémur. Sin embargo, en la parte anterior de la eminencia intercondílea, las trabéculas del grupo anterior estaban dispuestas paralelamente a lo largo de las fibras tendinosas del ligamento cruzado anterior, mientras que las trabéculas del grupo posterior estaban dispuestas paralelamente a lo largo de la dirección perpendicular de las fibras del ligamento cruzado anterior. De manera similar, en el área de inserción en la cara lateral del cóndilo medial del ligamento cruzado posterior, las trabéculas se extendían radialmente y profundas hacia el cóndilo medial. Profundamente en la parte posterior de la eminencia intercondílea, las trabéculas estaban dispuestas longitudinalmente. En la parte anterior de la eminencia intercondílea, las trabéculas estaban dispuestas paralelamente a lo largo de las direcciones perpendiculares de las fibras del ligamento. Los patrones de distribución del tejido óseo trabecular en las áreas de unión de los ligamentos cruzados en los extremos del fémur y la tibia eran diferentes. Estas diferencias deben tenerse en consideración cuando los cirujanos ortopédicos reconstruyen los ligamentos cruzados anteriores.

Assuntos

RESUMO

This study aimed to investigate the micro-anatomical morphology of ossicular chain in term fetus using micro-CT, in order to analyze the parameters of internal ossicular structure that may affect sound conduction.Four ossicular chains from two term fetuses were scanned by micro-CT. The related structural parameters of the trabeculae within the incus and malleus were calculated and compared. The fine anatomical structure of the auditory ossicles was analyzed.The microstructure of each auditory ossicles in term fetuses was clearly revealed by micro-CT. A marrow cavity was observed in the incus and malleus. In statistical analysis of the structural parameters of trabeculae in the incus and malleus, significant differences were found in BS/BV and Tb.Th (P < 0.05). Micro-CT enables the visualization of internal ossicular structure. The auditory ossicles in term fetus has good bone quality. The obtained bone structure data will help to clarify the physiological functions of normal fetal auditory ossicles.

Este estudio tuvo como objetivo investigar la morfología microanatómica de la cadena osicular en el feto a término con micro-CT, con el fin de analizar los parámetros de la estructura osicular interna que pueden afectar la conducción del sonido. Cuatro cadenas osiculares de dos fetos a término fueron examinadas por micro-CT. Se calcularon y compararon los parámetros estructurales relacionados de las trabéculas dentro de los incus y malleus. Se analizó la estructura anatómica fina de los osículos. Se observó claramente la microestructura de cada osículo en los fetos y la cavidad medular en el incus y el malleus. En el análisis estadístico de los parámetros estructurales de las trabéculas en el incus y el malleus, se encontraron diferencias significativas en BS / BV y Tb.Th (P <0,05). Micro-CT permite la visualización de la estructura osicular interna. Los osículos en el feto a término tienen buena calidad ósea. Los datos obtenidos de la estructura ósea ayudarán para aclarar las funciones fisiológicas de los osículos auditivos fetales normales.

Assuntos

RESUMO

The objective of this work is to quantify the relation between the value of the effective thermal conductivity of trabecular bone and its microstructure and marrow content. The thermal conductivity of twenty bovine trabecular bone samples was measured prior to and after defatting at 37, 47, and 57 °C. Computer models were built including the microstructure geometry and the gap between the tissue and measurement probe. The thermal conductivity (k) measured was 0.39 ±â€¯0.06 W m-1 K-1 at 37 °C, with a temperature dependence of + 0.2%°C-1. Replacing marrow by phosphate-buffered saline (defatting) increased both the computer simulations and measurement results by 0.04 W m-1 K-1. The computer simulations showed that k increases by 0.02-0.04 W m-1 K-1 when the model includes a gap filled by phosphate-buffered saline between the tissue and measurement probe. In the presence of microstructure and fatty red marrow, k varies by ±â€¯0.01 W m-1 K-1 compared with the case considering matrix only, which suggests that there are no significant differences between cortical and trabecular bone in terms of k. The computer results showed that the presence of a gap filled by phosphate-buffered saline around the energy applicator changes maximum temperature by < 0.7 °C, while including the bone microstructure involved a variation of < 0.2 mm in the isotherm location. Future experimental studies on measuring the value of k involving the insertion of a probe into the bone through a drill hole should consider the bias found in the simulations. Thermal models based on a homogeneous geometry (i.e. ignoring the microstructure) could provide sufficient accuracy.

Assuntos

RESUMO

The aim of this study was to quantify the cortical and cancellous bone in the mandibular symphysis and relate it to the teeth and to the skeletal class. A descriptive study was conducted using cone beam computerized tomography (CBCT). Class I and class III subjects were included, defined according to dental occlusion and cephalogram results. Linear measurements were taken on the CBCT of the mandibular canines, lateral incisors, and central incisors, where the analysis was related to the axial and apical axes considering the bone in relation to the dental area. With previous definitions, an observer took 2 measurements of the height of the mandibular symphysis, cortical bone of the buccal and lower region, and thickness of cancellous bone at different levels; the correlation coefficient between the first and second measurement was 0.99 and presented P = .001. The results were analyzed with analysis of variance and Tukey's honest significant difference test, with P < .05 being statistically significant. The symphysis height was significantly greater in class III subjects. The cortical bone was an average 1.67 ± 0.44 mm in vertical distance in the skeletal class I group and 1.74 ± 0.47 mm in the class III group. The cancellous bone had an average width of 5.03 ± 1.94 mm in the skeletal class I group and 4.74 ± 2.05 mm in the class III group. It was observed that cancellous bone was significantly thicker at the incisor level than at the canine level. There were anatomical differences between skeletal class I and class III subjects, although the clinical significance may be questionable. With the values from these analyses, it may be concluded that there are no significant differences in quantitation of the cortical and cancellous bone in the anterior mandibular symphysis.

Assuntos

RESUMO

PURPOSE: Existing microstructure parameters are able to predict vertebral in vitro failure load, but for noisy in vivo data more complex algorithms are needed for a robust assessment. METHODS: A new algorithm is proposed for the microstructural analysis of trabecular bone under in vivo quantitative computed tomography (QCT). Five fractal parameters are computed: (1) the average local fractal dimension FD, (2) its standard deviation FD.SD, (3) the fractal rod volume ratio fRV/BV, (4) the average fractal trabecular thickness fTb.Th, and (5) its coefficient of variation fTb.Th.CV. The algorithm requires neither an explicit skeletonization of the trabecular bone, nor a well-defined transition between bone and marrow phases. Two experiments were conducted to compare the fractal with established microstructural parameters. In the first, 20 volumes-of-interest of embedded vertebrae phantoms were scanned five times under QCT and high-resolution (HR-)QCT and once under peripheral HRQCT (HRpQCT), to derive accuracy and precision. In the second experiment, correlations between in vitro HRQCT structural parameters were obtained from 76 human T11, T12, or L1 vertebrae. In vitro fracture data were available for a subset of 17 human T12 vertebrae so that linear regression models between failure load and microstructural HRQCT parameters could be analyzed. RESULTS: The results showed correlations of fTb.Th and fRV/BV with their nonfractal pendants trabecular thickness (Tb.Th) and respective structure model index (SMI) while higher precision and accuracy was observed on the fractal measures. Linear models of bone mineral density with two and three fractal microstructural HRQCT parameters explained 86% and 90% (adjusted R2) of the failure load and significantly improved the linear models based only on BMD and established standard microstructural parameters (68%-77% adjusted R2). CONCLUSIONS: The application of fractal methods may grant further insight into the study of bone quality in vivo when image resolution and quality are less than optimal for current standard methods.

Assuntos

RESUMO

OBJECTIVE: To assess the effects of low-level laser irradiation vs ultrasound irradiation on bone healing after distraction osteogenesis. MATERIALS AND METHODS: Distraction osteogenesis was performed with rapid maxillary expansion devices (Hyrax-Morelli, Sorocaba, São Paulo Brazil) in 24 rabbits (Oryctolagus cuniculus). After a 2-day latency period, the distraction devices were activated for 10 days at a rate of 1 mm/d. Four groups of six animals were treated as follows: (1) control, (2) laser irradiation on the right side, (3) ultrasound irradiation on the right side, and (4) laser irradiation on the right side and ultrasound on the left side. Histomorphometric analysis was used to assess the bone healing area. Analysis of variance was used to perform the statistical analyses. RESULTS: The influence of low-intensity laser associated with ultrasound irradiation on bone healing was statistically significant. The analyses showed the greatest amount of bone healing in the jaws of animals in group 4, which received treatment with both ultrasound and laser. CONCLUSION: This study concluded that bone healing is accelerated with the application of laser irradiation. The greatest effects were observed with combined ultrasound and laser treatment.

Assuntos