RESUMO

Sample preparation frequently is considered the most critical stage of the analytical workflow. It affects the analytical throughput and costs; moreover, it is the primary source of error and possible sample contamination. To increase efficiency, productivity, and reliability, while minimizing costs and environmental impacts, miniaturization and automation of sample preparation are necessary. Nowadays, several types of liquid-phase and solid-phase microextractions are available, as well as different automatization strategies. Thus, this review summarizes recent developments in automated microextractions coupled with liquid chromatography, from 2016 to 2022. Therefore, outstanding technologies and their main outcomes, as well as miniaturization and automation of sample preparation, are critically analyzed. Focus is given to main microextraction automation strategies, such as flow techniques, robotic systems, and column-switching approaches, reviewing their applications to the determination of small organic molecules in biological, environmental, and food/beverage samples.

Assuntos

RESUMO

A dispersive micro-solid phase extraction (d-µ-SPE) procedure was developed for the simultaneous extraction of 39 multiclass pesticides, containing a variety of chemical groups (organophosphate, organochlorine, pyrethroid, strobilurin, thiocarbamate, triazole, imidazole, and triazine), from water samples. A customized d-µ-SPE glass device was combined with a multi-tube platform vortex and a micro-desorption unit (Whatman Mini-UniPrep G2 syringeless filter), which allowed the unique simultaneous desorption, extract filtration, and injection. A simplex-centroid mixture design and Doehlert design were employed to optimize the extraction conditions. The optimized extraction conditions consisted of an extraction time of 30 min, an addition of 6.74 % of NaCl into 100 mL of water sample, and a desorption time of 24 min with 500 µL of EtAc. The procedure provided a low limit of detection (LOD), ranging from 0.51 ng L-1 (4,4-DDE) to 22.4 ng L-1 (dimethoate), and an enrichment factor ranging from 72.5 (dimethoate) to 200 (tebuconazole). The relative recoveries of the pesticides from spiked freshwater and seawater ranged from 74.2 % (endrin) to 123 % (molinate). The proposed procedure was applied to detect the presence of multiclass pesticides in environmental water samples. Three pesticides commonly applied in Brazil, namely, malathion, dimethoate, and lambda-cyhalothrin, were detected in concentrations ranging from

Assuntos

RESUMO

Restricted access molecularly imprinted polymers (RAMIPs) are hybrid materials that present selective binding sites for a template (or similar molecules), and an external hydrophilic layer that avoids the binding of proteins to the material, making them appropriate for the sample preparation of protein fluids. RAMIPs have been used successfully in online and offline solid phase extractions, but there is no application as a fiber in solid phase microextraction (SPME), to the best of our knowledge. In this paper, molecularly imprinted fibers were synthesized inside glass capillary tubes (0.53 mm i.d.), using diazepam and methacrylic acid as template and functional monomer, respectively. The MIP fibers were coated with a cross-linked bovine serum albumin (BSA) layer, resulting in RAMIP fibers that were used in the SPME of benzodiazepines directly from biological fluids. The BSA layer acts as a protective barrier that avoids the binding of proteins from the sample by an electrostatic repulsion mechanism. The protein exclusion capacity of the RAMIP fiber was about 98%, which is selective to benzodiazepines in comparison with other drugs (citalopram and fluoxetine). The SPME was optimized and the extraction conditions were set as follows: 1000 µL of the sample diluted with water (1 : 0.5, v : v), no pH adjustment, an extraction time of 20 min at 500 rpm, and elution with 200 µL of acetonitrile for 5 min at 500 rpm. The fibers were used in the SPME of benzodiazepines directly from plasma samples, followed by HPLC-DAD analyses. The method was linear for bromazepam (50-750 µg L-1), clonazepam (15-250 µg L-1), alprazolam (15-350 µg L-1), nordiazepam (100-2100 µg L-1) and diazepam (100-2600 µg L-1), with correlation coefficients higher than 0.97. Relative standard deviations (precision) and relative errors (accuracy) ranged from 0.5 to 20.0%, and -15.6 to 21.6%, respectively.

Assuntos

RESUMO

In this paper, cork is proposed as a natural and renewable material for the extraction phase in disposable pipette extraction to be applied in the multiresidue determination of pharmaceuticals in human urine by HPLC with diode array detection. The compounds carbamazepine, losartan, ketoprofen, 17­ß­estradiol, naproxen, diazepam, 17­α­ethinylestradiol, estrone, diclofenac and ibuprofen were studied. A known amount (5 mg) of cork, with a size of 200 mesh, was inserted into a pipette tip. The method optimization was carried out with univariate and multivariate approaches. The optimized conditions were sample pH adjusted to 3, urine dilution factor of 40 (158 µL of urine diluted in 6.142 mL of ultrapure water), 9 extraction cycles each performed with 700 µL of sample, and extraction time of 10 s per cycle. Desorption was performed with 85 µL of methanol applying 6 cycles of 10 s each using the same solvent aliquot. For the clean-up step, 4 cycles were carried out each with 200 µL of methanol. The limits of quantification varied from 5 to 10 µg L-1 with determination coefficients higher than 0.9919 for the calibration curves for all the analytes. Intra-day and inter-day precision and relative recovery from urine samples donated by two volunteers were assessed based on three spiked concentrations. The analyte relative recoveries ranged from 65 to 117% (n = 3) for the two samples. Intra-day precision ranged from 1.2 to 17% (n = 3) and inter-day precision varied from 11 to 21% (n = 9).

Assuntos

RESUMO

On-line in-tube solid phase microextraction (in-tube SPME) coupled to high performance liquid chromatography and tandem mass spectrometry (HPLC-MS/MS) was successfully applied to the determination of selected triazines in water samples. The method based on the employment of a packed column containing graphene oxide (GO) supported on aminopropyl silica (Si) showed that the extraction phase has a high potential for triazines extraction aiming to its physical-chemical properties including ultrahigh specific surface area, good mechanical and thermal stability and high fracture strength. Injection volume and loading time were both investigated and optimized. The method validation using Si-GO to extract and concentrate the analytes showed satisfactory results, good sensitivity, good linearity (0.2-4.0 µg L-1) and low detection limits (1.1-2.9 ng L-1). The high extraction efficiency was determined with enrichment factors ranging from 1.2-2.9 for the lowest level, 1.3-4.9 intermediate level and 1.2-3.0 highest level (n = 3). Although the analytes were not detected in the real samples evaluated, the method has demonstrated to be efficient through its application in the analysis of spiked triazines in ground and mineral water samples.

Assuntos

RESUMO

This study proposes a new direct and fast method of analysis employing paper spray mass spectrometry (PS-MS). The paper used in the proposed method was modified with molecularly imprinted polymers (MIP) to create a specific site for cocaine analysis in oral fluid. MIP membrane was successfully synthetized and employed. The developed method showed to be linear in a concentration range from LOQ to 100 ng mL-1. The experimental value of LOQ obtained was 1 ng mL-1. The inter-day and intra-day precision and accuracy of the PS-MS method presented values lower than 15%. The total recoveries were also evaluated. The PS-MS method for the analysis of cocaine in oral fluid showed to be very promising and the validation parameters showed a good correlation with the literature. Graphical abstract ᅟ.

Assuntos

RESUMO

A microextração por sorbente empacotado (MEPS) é uma técnica de preparo de amostras ainda pouco utilizada no âmbito da toxicologia, em que os mesmos princípios da extração em fase sólida convencional são adaptados para uma escala miniaturizada. As principais vantagens da técnica estão associadas ao pequeno volume de amostra e de solventes utilizados, à possibilidade de realizar múltiplas extrações com um mesmo cartucho e à facilidade de automação. Os benzodiazepínicos possuem grande relevância na toxicologia dada sua ampla utilização e seus efeitos que podem, por exemplo, comprometer a capacidade de dirigir, além do uso abusivo, e como drogas facilitadoras de crimes. Neste trabalho, um método de MEPS foi desenvolvido e otimizado para a determinação de sete benzodiazepínicos e seus produtos de biotransformação (diazepam, clonazepam, flunitrazepam, alprazolam, bromazepam, 7-aminoflunitrazepam e nordiazepam) utilizando 100 µL de amostra de sangue total post mortem. Após a extração, os eluatos foram analisados por cromatografia líquida em fase reversa acoplada a espectrometria de massas. O método foi validado de acordo com as recomendações do Scientific Working Group for Forensic Toxicology, apresentando linearidade adequada de 5 a 500 ng.mL-1 . Os valores de exatidão (90,4 a 109,5%), precisão intra-dia (2,5 a 10,7 %CV) e inter-dia (1,1 a 8,0 %CV) também foram satisfatórios. MEPS foi realizada mais de 60 vezes com a mesma fase extratora sem evidências de contaminação cruzada. Dez amostras reais fornecidas pelo Instituto Médico Legal de São Paulo foram analisadas. Foram quantificados diazepam, nordiazepam, clonazepam e bromazepam. Os resultados encontrados em cada uma das amostras foram comparados com dados da literatura

Microextraction by packed sorbent (MEPS) is a sample preparation technique still little used in toxicology, where the same principles of conventional solid phase extraction are adapted to a miniaturized scale. The main advantages of the technique are associated with the small volume of sample and solvents required, the possibility of performing multiple extractions with the same cartridge and ease process automation. Benzodiazepine drugs are relevant in toxicology because of their widespread use, and effects (which may, for example, compromise the ability to drive vehicles), abuse and records as crime-facilitating drugs. In this work, a MEPS method was developed and optimized for a determination of seven benzodiazepines and their metabolites (diazepam, nordiazepam, clonazepam, flunitrazepam, 7-aminoflunitrazepam, alprazolam, and bromazepam) using 100 µL of post mortem whole blood. After extraction, the eluates were analyzed by reversed-phase liquid chromatography coupled to mass spectrometry. The method was validated according to the recommendations of the Scientific Working Group for Forensic Toxicology, presenting adequate linearity from 5 to 500 ng.mL-1 . The values of accuracy (90.4 to 109.5%), intra-day precision (2.5 to 10.7 %CV) and inter-day (1.1 to 8.0 %CV) also presented satisfactory results. MEPS was performed more than 60 times with the same extractive phase without compromising the results with the evidence of carryover. Institute of Legal Medicine were submitted to analysis by MEPS-LC-MS/MS. In these samples, the following analytes were quantified: diazepam, nordiazepam, clonazepam and bromazepam. The results found in each of the samples were compared with data from the literature

Assuntos

RESUMO

A headspace solid phase microextraction (HS-SPME) method combined with gas chromatography-mass spectrometry (GC/MS) was developed and optimized for extraction and analysis of volatile organic compounds (VOC) of leaves and galls of Myrcia splendens. Through a process of optimization of main factors affecting HS-SPME efficiency, the coating divivnilbenzene-carboxen-polydimethylsiloxane (DVB/Car/PDMS) was chosen as the optimum extraction phase, not only in terms of extraction efficiency, but also for its broader analyte coverage. Optimum extraction temperature was 30°C, while an extraction time of 15min provided the best compromise between extraction efficiencies of lower and higher molecular weight compounds. The optimized protocol was demonstrated to be capable of sampling plant material with high reproducibility, considering that most classes of analytes met the 20% RSD FDA criterion. The optimized method was employed for the analysis of three classes of M. splendens samples, generating a final list of 65 tentatively identified VOC, including alcohols, aldehydes, esters, ketones, phenol derivatives, as well as mono and sesquiterpenes. Significant differences were evident amongst the volatile profiles obtained from non-galled leaves (NGL) and leaf-folding galls (LFG) of M. splendens. Several differences pertaining to amounts of alcohols and aldehydes were detected between samples, particularly regarding quantities of green leaf volatiles (GLV). Alcohols represented about 14% of compounds detected in gall samples, whereas in non-galled samples, alcohol content was below 5%. Phenolic derived compounds were virtually absent in reference samples, while in non-galled leaves and galls their content ranged around 0.2% and 0.4%, respectively. Likewise, methyl salicylate, a well-known signal of plant distress, amounted for 1.2% of the sample content of galls, whereas it was only present in trace levels in reference samples. Chemometric analysis based on Heatmap associated with Hierarchical Cluster Analysis (HCA) and Principal Component Analysis (PCA) provided a suitable tool to differentiate VOC profiles in vegetal material, and could open new perspectives and opportunities in agricultural and ecological studies for the detection and identification of herbivore-induced plant VOC emissions.

Assuntos

RESUMO

A new analytical method coupling a (off-line) solid-phase microextraction with an on-line capillary electrophoresis (CE) sample enrichment technique was developed for the analysis of ketoprofen, naproxen and clofibric acid from water samples, which are known as contaminants of emerging concern in aquatic environments. New solid-phase microextraction fibers based on physical coupling of chromatographic supports onto epoxy glue coated needle were studied for the off-line preconcentration of these micropollutants. Identification and quantification of such acidic drugs were done by capillary zone electrophoresis (CZE) using ultraviolet diode array detection (DAD). Further enhancement of concentration sensitivity detection was achieved by on-line CE "acetonitrile stacking" preconcentration technique. Among the eight chromatographic supports investigated, Porapak Q sorbent showed higher extraction and preconcentration capacities. The screening of parameters that influence the microextraction process was carried out using a two-level fractional factorial. Optimization of the most relevant parameters was then done through a surface response three-factor Box-Behnken design. The limits of detection and limits of quantification for the three drugs ranged between 0.96 and 1.27 µg∙L-1 and 2.91 and 3.86 µg∙L-1, respectively. Recovery yields of approximately 95 to 104% were measured. The developed method is simple, precise, accurate, and allows quantification of residues of these micropollutants in Genil River water samples using inexpensive fibers.

Assuntos

RESUMO

This paper describes the synthesis, characterization and use of graphene supported on aminopropyl silica through covalent bonds (Si-G) as a sorbent for microextraction by packed sorbent (MEPS). Five parabens (methyl, ethyl, propyl, butyl and benzyl) present in water matrices were used as model compounds for this evaluation. The Si-G phase was compared to other sorbents used in MEPS (C18 and Strata™-X) and also with graphene supported on primary-secondary amine (PSA) silica, where Si-G showed better results. After this, the MEPS experimental parameters were optimized using the Si-G sorbent. The following variables were optimized through univariate experiments: pH (4,7 and 10), desorption solvent (ACN:MeOH (50:50), ACN:H2O (40:60), MeOH and ACN) and ionic strength (0, 10 and 20% of NaCl). A factorial design 26-2 was then employed to evaluate other variables, such as the sample volume, desorption volume, sampling cycles, wash cycles and desorption cycles, as well as the influence of NaCl% on the extraction performance. The optimized method achieved a linear range of 0.2-20µg/L for most parabens; weighted calibration models were employed during the linearity evaluation to reduce the absolute sum of the residue values and improve R2, which ranged from 0.9753 to 0.9849. The method's accuracy was 82.3-119.2%; precision, evaluated as the coefficient of variance for intraday and interday analysis, ranged from 1.5 to 19.2%. After evaluation of the figures of merit, the method was applied to the determination of parabens in water samples.

Assuntos

RESUMO

A new molecularly imprinted polymer modified with restricted access material (a hydrophilic external layer), (MIP-RAM) was synthesized via polymerization in situ in an open fused silica capillary. This stationary phase was used as sorbent for in-tube solid phase microextraction (in-tube SPME) to determine parabens in breast milk samples by ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Scanning electron micrographs (SEM) illustrate MIP surface modification after glycerol dimethacrylate (hydrophilic monomer) incorporation. The interaction between parabens and MIP-RAM was investigated by Fourier-transform infrared (FTIR) spectroscopy. The Scatchard plot for MIP-RAM presented two linear parts with different slopes, illustrating binding sites with high- and low-affinity. Endogenous compounds exclusion from the MIP-RAM capillary was demonstrated by in-tube SPME/LC-UV assays carried out with blank milk samples. The in-tube SPME/UHPLC-MS/MS method presented linear range from 10 ng mL(-1) (LLOQ) to 400 ng mL(-1) with coefficients of determination higher than 0.99, inter-assay precision with coefficient of variation (CV) values ranging from 2 to 15%, and inter-assay accuracy with relative standard deviation (RSD) values ranging from -1% to 19%. Analytical validation parameters attested that in-tube SPME/UHPLC-MS/MS is an appropriate method to determine parabens in human milk samples to assess human exposure to these compounds. Analysis of breast milk samples from lactating women demonstrated that the proposed method is effective.

Assuntos

RESUMO

Molecularly imprinted polymers for the determination of triazines were synthesized by precipitation using atrazine as template, methacrylic acid as functional monomer, ethylene glycol dimethacrylate as crosslinker, and 2,2'-azobisisobutrynitrile as initiator. The polymers were characterized by infrared spectroscopy and scanning electron microscopy and packed in a device for microextraction by packed sorbent aiming for the preconcentration/cleanup of herbicides, such as atrazine, simazine, simetryn, ametryn, and terbutryn in corn samples. Liquid chromatography coupled with time-of-flight mass spectrometry was used for the separation and determination of the herbicides. The selectivity coefficient of molecularly imprinted polymers was compared with that of nonimprinted polymer for the binary mixtures of atrazine/propanil and atrazine/picloram, and the values obtained were 15.6 and 2.96, respectively. The analytical curve ranged from 10 to 80 µg/kg (r = 0.989) and the limits of detection and quantification in the corn matrices were 3.3 and 10 µg/kg, respectively. Intra- and interday precisions were < 14.8% and accuracy was better than 90.9% for all herbicides. Polymer synthesis was successfully applied to the cleanup and preconcentration of triazines from fortified corn samples with 91.1-109.1% of recovery.

Assuntos

RESUMO

In-tube solid-phase microextraction (in-tube SPME) coupled with high performance liquid chromatography (HPLC) or liquid chromatography coupled to mass spectrometry (LC-MS) successfully determines drugs or biomarkers in biological samples by direct sample injection or by simple sample treatment. This technique uses a capillary column as extraction device. Several capillaries (wall-coated open tubular, sorbent-packed, porous monolithic rods, or fiber-packed) with unique phases have been developed and evaluated, aiming to improve the efficiency and selectivity of the in-tube SPME-LC technique. This review describes new developments and applications occurred in recent years, and discusses future trends with emphasis on new extraction devices and current technology used for the synthesis of selective sorbents for bioanalysis, such as (i) polypyrrole, (ii) restricted-access materials, (iii) immunosorbents, (iv) molecular imprinting polymers, (v) monolithic polymers, and (vi) bi-functional materials.

Assuntos

RESUMO

A new fiber for solid-phase microextraction (SPME) was prepared employing cork as a coating. The morphology and composition of the cork fiber was evaluated by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR), respectively. The proposed fiber was used for the determination of polycyclic aromatic hydrocarbons (PAHs) in river water samples by gas chromatography-selected ion monitoring-mass spectrometry (GC-SIM-MS). A central composite design was used for optimization of the variables involved in the extraction of PAHs from water samples. The optimal extraction conditions were extraction time and temperature of 60 min and 80°C, respectively. The detection and quantification limits were 0.03 and 0.1 µg L(-1), respectively. The recovery values were between 70.2 and 103.2% and the RSD was ≤15.7 (n=3). The linear range was 0.1-10 µg L(-1) with r≥0.96 and the fiber-to-fiber reproducibility showed RSD≤18.6% (n=5). The efficiency of the cork fiber was compared with commercially available fibers and good results were achieved, demonstrating the applicability and great potential of cork as a coating for SPME.

Assuntos

RESUMO

A solid-phase micro-extraction (SPME) method using an SPME fiber device and graphite furnace (GF) for extracting Se compounds was proposed. Various factors affecting the derivatization and extraction of Se(IV) by SPME-GF were evaluated, including the effect of acid (type and concentration), the concentration of the derivatizing agent, the derivatization temperature, the extraction and derivatization times and the extraction temperature. After optimizing these conditions, the quantification of Se(IV) was performed by Gas Chromatography-Mass Spectrometry (GC-MS). The limit of detection was 0.37 µg L(-1) for Se(IV). The method was successfully applied to the total Se determination in certified reference materials (BCR-414 and SRM 1643e). A recovery of 97% was obtained for water (SRM 1643e). After microwave oven decomposition and the reduction of selenium using a mixture of 2 mol L(-1) HCl and 1% (w/v) KBr, a recovery of 101% and a relative standard deviation of 3.5% were attained for plankton (BCR-414). The SPME-GF method combined with GC-MS was also applied to the determination of the total selenium in a drug sample (selenium chelate).

Assuntos

RESUMO

In the present work three different SPME fibers have been investigated for simultaneous determination of methyl-, butyl- and phenyltins by using gas chromatography-pulsed flame photometer detection (GC-PFPD). The optimal experimental conditions for each fiber were determined and the respective figures of merit were evaluated. All fiber evaluated presented similar limit of detection (sub ng L⁻¹) and requires two internal standards to reach an acceptable repeatability. However, the CAR-PDMS fiber offers the best compromise between selectivity and sensibility for determination of organotins selected. The developed method was validated for analysis of certified reference material and spiked samples, obtaining satisfactory results. Finally, some contaminated samples were analyzed demonstrating the applicability of developed method for determination of organotin compounds in the environment and for monitoring their biochemical cycle.

Assuntos

RESUMO

The present work demonstrates the successful application of automated biocompatible in-tube solid-phase microextraction coupled with liquid chromatography (in-tube SPME/LC) for determination of interferon alpha(2a) (IFN α(2a)) in plasma samples for therapeutic drug monitoring. A restricted access material (RAM, protein-coated silica) was employed for preparation of a lab-made biocompatible in-tube SPME capillary that enables the direct injection of biological fluids as well as the simultaneous exclusion of macromolecules by chemical diffusion barrier and drug pre-concentration. The in-tube SPME variables, such as sample volume, draw/eject volume, number of draw-eject cycles, and desorption mode were optimized, to improve the sensitivity of the proposed method. The IFN α(2a) analyses in plasma sample were carried out within 25min (sample preparation and LC analyses). The response of the proposed method was linear over a dynamic range, from 0.06 to 3.0MIUmL(-1), with correlation coefficient equal to 0.998. The interday precision of the method presented coefficient of variation lower than 8%. The proposed automated method has adequate analytical sensitivity and selectivity for determination of IFN α(2a) in plasma samples for therapeutic drug monitoring.

Assuntos

RESUMO

A selective and reproducible off-line solid-phase microextraction procedure was developed for the simultaneous enantioselective determination of mirtazapine (MRT), demethylmirtazapine and 8-hydroxymirtazapine in human urine. CE was used for optimization of the extraction procedure whereas LC-MS was used for method validation and application. The influence of important factors in the solid-phase microextraction efficiency is discussed, such as the fiber coatings, extraction time, pH, ionic strength, temperature and desorption time. Before extraction, human urine samples were submitted to enzymatic hydrolysis at 37 degrees C for 16 h. Then, the enzyme was precipitated with trichloroacetic acid and the pH was adjusted to 8 with 1 mol/L pH 11 phosphate buffer solution. In the extraction, the analytes were transferred from the aqueous solution to the polydimethylsiloxane-divinylbenzene fiber coating and then desorbed in methanol. The mean recoveries were 5.4, 1.7 and 1.0% for MRT, demethylmirtazapine and 8-hydroxymirtazapine enantiomers, respectively. The method was linear over the concentration range of 62-1250 ng/mL. The within-day and between-day assay precision and accuracy were lower than 15%. The method was successfully employed in a preliminary cumulative urinary excretion study after administration of racemic MRT to a healthy volunteer.

Assuntos

RESUMO

A sensitive, selective, and reproducible in-tube polypyrrole-coated capillary (PPY) solid-phase microextraction and liquid chromatographic method for fluoxetine and norfluoxetine enantiomers analysis in plasma samples has been developed, validated, and further applied to the analysis of plasma samples from elderly patients undergoing therapy with antidepressants. Important factors in the optimization of in-tube SPME efficiency are discussed, including the sample draw/eject volume, draw/eject cycle number, draw/eject flow-rate, sample pH, and influence of plasma proteins. Separation of the analytes was achieved with a Chiralcel OD-R column and a mobile phase consisting of potassium hexafluorophosphate 7.5mM and sodium phosphate 0.25M solution, pH 3.0, and acetonitrile (75:25, v/v) in the isocratic mode, at a flow rate of 1.0 mL/min. Detection was carried out by fluorescence absorbance at Ex/Em 230/290 nm. The multifunctional porous surface structure of the PPY-coated film provided high precision and accuracy for enantiomers. Compared with other commercial capillaries, PPY-coated capillary showed better extraction efficiency for all the analytes. The quantification limits of the proposed method were 10 ng/mL for R- and S-fluoxetine, and 15 ng/mL for R- and S-norfluoxetine, with a coefficient of variation lower than 13%. The response of the method for enantiomers is linear over a dynamic range, from the limit of quantification to 700 ng/mL, with correlation coefficients higher than 0.9940. The in-tube SPME/LC method can therefore be successfully used to analyze plasma samples from ageing patients undergoing therapy with fluoxetine.

Assuntos

RESUMO

In the present work, an analytical method for the simultaneous determination of seven non steroidal anti-inflammatory drugs (naproxen, ketoprofen, diclofenac, piroxicam, indomethacin, sulindac and diflunisal) and the anticonvulsant carbamazepine is reported. The method involves preconcentration and clean-up by solid-phase microextraction using polydimethylsiloxane/divinylbenzene fibers, followed by liquid chromatography with diode array detection analysis. Parameters that affect the efficiency of the solid-phase microextraction step such as soaking solvent, soaking period, desorption period, stirring rate, extraction time, sample pH, ionic strength, organic solvent and temperature were investigated using a Plackett-Burman screening design. Then, the factors presenting significant positive effects on the analytical response (soaking period, stirring rate, stirring time) were considered in a further central composite design to optimize the operational conditions for the solid phase microextraction procedure. Additionally, multiple response simultaneous optimization by using the desirability function was used to find the optimum experimental conditions for the on-line solid-phase microextraction of analytes in river water samples coupled to liquid chromatography and diode array detection. The best results were obtained using a soaking period of 5 min, stirring rate of 1400 rpm and stirring time of 44 min. The use of solid-phase microextraction technique avoided matrix effect and allowed to quantify the analytes in river water samples by using Milli-Q based calibration graphs. Recoveries ranging from 71.6% to 122.8% for all pharmaceuticals proved the accuracy of the proposed method in river water samples. Method detection limits were in the range of 0.5-3.0 microgL(-1) and limits of quantitation (LOQs) were between 1.0 and 4.0 microgL(-1) for pharmaceutical compounds in river water samples. The expanded uncertainty associated to the measurement of the concentration ranged between 8.5% and 29.0% for 20 microgL(-1) of each analyte and between 9.0% and 29.5% for the average of different concentration levels. The main source of uncertainty was the calibration step in both cases.

Assuntos