RESUMO
INTRODUCTION: The workflow in clinical flow cytometry laboratories must constantly be reviewed to develop technical procedures that improve quality and productivity and reduce costs. Using the Beckman Coulter dry coating technology, we customized a ten-color tube with dried antibody reagents, designated the Duraclone screening tube (DST), for screening hematological malignancies. Here, we compared the applicability, clinical and numerical equivalence, and cost and time required for the technical procedures between the liquid reagents and the DST. METHODS: The DST contains CD4 + Kappa-FITC, CD8 + Lambda-PE, CD3 + CD14-ECD, CD33-PE-Cy5.5, CD20 + CD56-PE-Cy7, CD34-APC, CD19-APC-AlexaFluor700, CD10-APC-AlexaFluor750, CD5-Pacific Blue, and CD45-Krome Orange. We evaluated 20 bone marrow samples, 13 peripheral blood samples, 6 lymph node biopsy samples, 5 fine-needle aspirate samples, 5 cerebrospinal fluid samples, and 1 pleural fluid sample. RESULTS: The DST was useful for more than 60% of our samples. It was able to enumerate the majority of the populations in all types of samples with a statistically acceptable correlation with the liquid reagents. The use of the DST translated into significant time and cost savings of 15.8% and 12.3%, respectively, compared with the use of the liquid reagent. The cost was reduced by $14.36 per sample. CONCLUSIONS: The DST is an efficient solution for screening hematological malignancies with improved quality, productivity, standardization, and sustainability. These improvements could benefit patients by providing faster diagnoses using a higher quality and lower cost reagent.
Assuntos
Neoplasias Hematológicas/diagnóstico , Anticorpos/imunologia , Humanos , Imunofenotipagem , Indicadores e Reagentes/economia , Indicadores e Reagentes/normas , Fatores de TempoRESUMO
The biotechnology sector is continually seeking sustainable and more economical bioprocesses. Fermentation media produced with cheap components or wastes reduce production costs. Moreover, if wastes are used, they contribute to avoid environmental pollution. In this work, microbial growth media based on molasses or acidified glycerol as carbon sources and fertilizer as nitrogen source were tested for the production of a whole-cell catalyst that could be used in Cr(VI)-containing wastewater treatments. Results showed that the highest biomass production yield was obtained with a medium containing acidified glycerol 5% v/v and fertilizer 0.6% v/v. The biomass produced using this medium was immobilized in calcium alginate beads and used as catalyst in the biotransformation of Cr(VI) into Cr(III). The catalyst could be efficiently used for 5 reduction cycles of 40mg/l Cr(VI) each. Cr(III) retention assays were performed to determine whether Cr(III) could be retained by the catalyst avoiding its solubilization in the supernatants. The retention capacity of the catalyst at 32°C and pH 3.0 was 3mg Cr(III)/g. Both an alternative and economical fermentation medium is here proposed for the optimization of Cr(VI)-containing wastewater treatment.
Assuntos
Biodegradação Ambiental , Cromo/metabolismo , Meios de Cultura , Fermentação , Pseudomonas/efeitos dos fármacos , Águas Residuárias/química , Poluentes Químicos da Água/metabolismo , Purificação da Água/métodos , Biomassa , Carbono/metabolismo , Catálise , Células Imobilizadas , Cromo/análise , Meios de Cultura/economia , Meios de Cultura/farmacologia , Fertilizantes , Glicerol/economia , Glicerol/farmacologia , Indicadores e Reagentes/economia , Melaço , Nitrogênio/metabolismo , Pseudomonas/crescimento & desenvolvimento , Pseudomonas/metabolismo , Solubilidade , Águas Residuárias/economia , Poluentes Químicos da Água/análise , Purificação da Água/economiaRESUMO
The production of biological indicators involving bacterial sporulation and multi-step downstream processes has been described. The goal of the present work was to use fermented material as the final product in a biological indicator, thereby reducing processing steps and costs. The performance of three different inexpensive supports (vermiculite, sand, and sugarcane bagasse) was assessed by determining Bacillus atrophaeus sporulation during solid-state fermentation and by assessing the direct use of the fermentation products in the subsequent steps of the process. All three supports allowed spore production of between 10(7) and 10(9) CFU g(-1). Sand proved to be the best inert support enabling the direct use of the fermented product due to its easy homogenization, filling properties, and compatibility with recovery medium. Bacterial adhesion to the sand surface was supported by biofilm formation. The resistance to sterilization of the dried fermentation product was evaluated. For dry-heat resistance (160°C), the D value was 6.6 min, and for ethylene oxide resistance (650 mg/L), the D value was 6.5 min. The cost reduction of this process was at least 48%. No previous studies have been published on the application of sand as a support in solid-state fermentation for the production of biological indicators.