RESUMO

OBJECTIVE: The avian beak is a complex organ containing bone, neurovascular tissue, and keratinized covering (rhamphotheca). Nerve-rich papillae extend through bone into rhamphotheca providing sensory input from the beak tip. Beak trimming is a common procedure in avian species and is used for corrective, cosmetic, and behavioral modification purposes. Yet, practitioners are not well versed in complete beak anatomy, and therefore, beak trimming often disregards neurovasculature, injuring the patient and hampering recovery. Here, using comprehensive anatomical description, we aim to provide recommendations on how to safely perform beak trimming without damaging underlying sensory papillae. ANIMALS: Here, we evaluated beaks of 2 deceased grey parrots (Psittacus erithacus). PROCEDURES: In one, we used a novel stain and microcomputed tomography to visualize papillae in the upper and lower beaks. In a second, we hand isolated the upper and lower beak dermal papillae and used high-resolution photography plus traditional paraffin histology. RESULTS: Papillae and their nerves were easily identified in these 2- and 3-dimensional approaches. This allowed us to determine the approximate lengths of papillae within the upper and lower beak. CLINICAL RELEVANCE: Based on these findings, the authors recommend lateral radiographs of the bird's head and beak to identify the location of the underlying bone relative to the overlying rhamphotheca before performing beak trims. Specifically in grey parrots, the authors recommend the upper and lower beak should not be trimmed closer than 8 to 10 mm from the underlying bone. Further work is needed to support these recommendations and provide guidelines for other species.

Assuntos

RESUMO

Background: Since chinchilla (Chinchilla lanigera) is frequently used as a laboratory animal, satisfactory data about the imaging anatomical appearance of its adrenal glands, such as their anatomical location and closeness with other abdominal soft tissue and vessels, are important. The aim of this study to determine anatomical features of the chinchilla adrenal gland's using computed tomography and magnetic resonance imaging. Materials, Methods & Results: We used 12 chinchillas (6 males and 6 females), aged 18 months. The animals were in supine recumbency when contrast-enhanced computed tomography (CT) was performed. Transverse, sagittal and dorsal images of the adrenal glands were obtained with iodinated contrast medium, and 3D reconstruction of the obtained images was applied. The craniocaudal (CrCc - length), dorsoventral (DV - height) and lateromedial (LM - width) diameters were measured using an electronic calliper. Magnetic resonance imaging was performed, and coronal T1-weighted images were obtained. The transverse CT anatomical image at the level of the 3rd lumbar vertebra demonstrated the location of the both adrenal glands in accordance with the grey-white scale's variation. The right adrenal gland was hypo-attenuated and elliptic compared to the right kidney and in close contact to it and to the caudal vena cava. The left adrenal gland was oval and at a distance to the abdominal aorta. The dorsal MRI anatomical study of the chinchilla's abdominal organs at a distance of 10 mm from the spine and in a T1-weighted sequence showed that both adrenal glands were retroperitoneal organs. Discussion: Post-contrasted CT defined the topography of both glands. The right adrenal gland has an oval shape and is cranially situated to the left gland, whose shape is cylindrical and elongated. The LM diameter of the right gland is higher than that measured in the left gland. Both DV and CrCc diameters of the right gland are lower compared to those of the left gland. The right adrenal gland is in close contact to the caudal vena cava, the right kidney and the liver, and the left adrenal gland is in a distance to the abdominal aorta. The right adrenal gland was close to the caudal vena cava and the right kidney and medially to the left kidney. The successful comparative analysis of the images in 3D reconstruction and post-contrast CT in 2D allowed us to conclude that 3D reconstruction is suitable to obtain detailed information in a summary form regarding the closeness of the glands and their shape, mainly because the results are in a real time and highly comprehensive. Our data are in in agreement with previous findings about the advantages of 3D reconstruction. The research algorithm applied was based on the dorsal visualization of the glands in T1-weighted sequence, achieving a comprehensive and high-quality MRI imaging of the examined organs in chinchillas. Both adrenal glands were retroperitoneal organs and with low signal. The dorsal MRI anatomical study of the chinchilla's abdominal organs at a distance of 10 mm from the spine and in a T1-weighted sequence showed the whole profile of the right and left glands and the cranial position of the right gland to the left one, the close contact between the right gland and the kidney and the distance between the left gland and the left kidney. The MRI results are detailed and comprehensive for interpretation. In conclusion, the results of the present study are comprehensive, detailed and with high resolution. We present data for the anatomical relationships of the studied organs, their shape and macrometric parameters, concluding that the above mentioned modalities are very important tools for studying the chinchilla's adrenal glands to create a morphological base, which is necessary to investigate specific diseases.

Assuntos

RESUMO

The aim of this study was to evaluate the anatomical structures of the skulls of peccaries to establish the basis for their clinical study and future preclinical research. Ten skulls of adult peccaries were subjected to tomographic examination. The data obtained were processed via three-dimensional image reconstruction software (3D images). The reconstructions obtained from the neurocranium of the studied specimens allowed the identification and description of the following structures: nasal bone, frontal bone, parietal bones, incisor bone, maxillary bone, zygomatic bone, temporal bone, palatal bone, occipital bone, vomer bone, pterygoid bone, sphenoid bone, paranasal sinuses and orbit. Computed tomography proved to be an important diagnostic tool in the investigation of the skull of this species, allowing the acquisition of anatomical values not yet documented for the species in the literature.(AU)

O objetivo deste estudo foi avaliar as estruturas anatômicas dos crânios de catetos, a fim de se estabelecerem as bases para seu estudo clínico e futuras pesquisas pré-clínicas. Dez crânios de catetos adultos foram submetidos a exame tomográfico. Os dados obtidos foram introduzidos em um software de reconstrução de imagens tridimensionais (imagens em 3D). As reconstruções obtidas do neurocrânio dos espécimes estudados permitiram a identificação e a descrição das seguintes estruturas: osso nasal, osso frontal, ossos parietais, osso incisivo, osso maxilar, osso zigomático, osso temporal, osso palatino, osso occipital, osso vômer, osso pterigoide, osso esfenoide, seios paranasais e órbita. A tomografia computadorizada mostrou-se como uma ferramenta diagnóstica importante na investigação do crânio dessa espécie, permitindo a aquisição de valores anatômicos ainda não documentados para a espécie na literatura.(AU)

Assuntos

RESUMO

The outcome of total hip arthroplasty (THA) in dogs is directly related to surgical planning. Templating of radiographs prior to THA should help the surgeon anticipate prosthesis size and femoral shape allowing canal fill of the proximal metaphysis by the implant ensuring primary stable fixation. The canal flare index (CFI) obtained from radiograph has been used as a measure of risk of complications for the technique in human beings and dogs. However, standard radiographs only provide limited data for the selection of cementless prostheses and the assessment of their fit within the femoral canal, due to factors like radiographic magnification and femoral rotation. Therefore, three-dimensional evaluation based on computed tomography (CT) may be a better tool for CFI measurement. The aim of this study was to compare anatomical measurement with CFI values obtained from craniocaudal radiography and CT. Craniocaudal radiographs using a horizontal radiographic beam (CR), CT, and anatomical macroscopic measurements (A) were obtained from 45 femurs from 23 canine cadavers. The differences between the values of CFI obtained from radiograph (CFI-R), computed tomography on transverse (CFI- TT) and longitudinal axis (CFI-TL) compared to the CFI obtained from macroscopic measurements - gold standard - (CFI-A), and 95% limits of agreement (LOA) between the values, were evaluated by the Bland-Altman method. Dimensions obtained from CT techniques had a greatest mean difference from anatomical and CFI values were also different (P=0.032). Under the experimental conditions, the craniocaudal radiograph, provided the most accurate measurement of the CFI (mean difference: 0.087 ± 0.42).(AU)

O resultado da artroplastia total do quadril (ATQ) em cães está diretamente relacionado ao planejamento cirúrgico. O templating radiográfico pré-operatório da ATQ deve ajudar o cirurgião a prever o tamanho da prótese e o formato do fêmur, o que permitirá um preenchimento ideal da metáfise proximal pelo implante, garantindo, assim, fixação primária estável. O índice de alargamento do canal (Canal Flare Index - CFI) obtido em radiografias tem sido utilizado como fator de risco de complicações para a técnica em humanos e cães. No entanto, as radiografias podem fornecer apenas dados limitados para a seleção de próteses não cimentadas e a avaliação do seu encaixe no canal femoral, devido a fatores como ampliação radiográfica e rotação femoral. Portanto, a avaliação tridimensional baseada na tomografia computadorizada (TC) pode ser uma ferramenta vantajosa para a mensuração do CFI. O objetivo deste estudo foi comparar a medida anatômica com os valores de CFI obtidos na radiografia craniocaudal e na TC. Radiografias craniocaudais utilizando feixe radiográfico horizontal (CR), tomografia computadorizada e medidas macroscópicas anatômicas (A) foram obtidas de 45 fêmures de 23 cadáveres caninos. As diferenças entre os valores de CFI obtidos na radiografia (CFI-R), na tomografia computadorizada no eixo transversal (CFI-TT) e no eixo longitudinal (CFI-TL), em comparação com os valores de CFI obtidos nas medições macroscópicas - padrão-ouro - (CFI-A) e os limites de concordância de 95% (LOA) entre os valores, foram avaliadas pelo método de Bland-Altman. As dimensões obtidas pelas técnicas de TC apresentaram maior diferença média dos valores anatômicos, e as do CFI também foram diferentes (P=0,032). Nas condições experimentais, a radiografia craniocaudal forneceu a medida mais precisa do CFI (diferença média: 0,087 ± 0,42) para representar o padrão-ouro deste estudo.(AU)

Assuntos

RESUMO

The tongue is an important organ in species due to its feeding functions, and its structure is influenced by the habitat and diet. The Collared Peccary (Pecari tajacu, Linnaeus, 1758) is a terrestrial mammal that is distributed on the American continents and has an omnivorous diet. This study aimed to describe the morphological characteristics of the tongue, lingual papillae and the connective tissue cores (CTCs) of the Collared Peccary. Eight tongues were collected from the Wild Animals Multiplication Center. The samples (n = 6) were processed for three-dimensional analysis of their dorsal epithelium, and their CTCs by scanning electron microscopy and the other samples (n = 2) were used to observe ultrastructural characteristics by transmission electron microscopy. Filiform papillae were observed in the lingual apex and body with their conical CTC demonstrating ripples in their extent. Two types of fungiform papillae were observed, the first in the apex and body with a dome-shaped CTC and the second forming a dorsolateral line with a radial pattern CTC. The vallate papillae were bilateral in the caudal region with the CTCs, characterised by numerous projections, and foliate papilla were not observed. We found a new type of papilla anteriorly to the vallate papilla with an irregular groove and a CTC formed by triangular-shaped projections with a duct opening at the top. We concluded that the lingual papillae of the Collared Peccary resemble those papillae of other mammals, however, were revealed another form of their CTCs and a new lingual papillae morphological description.

Assuntos

RESUMO

PURPOSE: To develop 3D anatomical models, and corresponding radiographs, of canine jaw fractures. METHODS: A base model was generated from a mandibular bone scan. With this model it was possible to perform fracture planning according to the anatomical location. RESULTS: The 3D base model of the canine mandible was similar in conformation to the natural bone, demonstrating structures such as canine tooth crowns, premolars and molars, mental foramina, body of the mandible, ramus of the mandible, masseteric fossa, the coronoid process, condylar process, and angular process. It was not possible to obtain detail of the crown of the incisor teeth, mandibular symphysis, and the medullary channel. Production of the 3D CJF model took 10.6 h, used 150.1 g of filament (ABS) and cost US$5.83. CONCLUSION: The 3D canine jaw fractures models, which reproduced natural canine jaw fractures, and their respective radiographic images, are a possible source of educational material for the teaching of veterinary medicine.

Assuntos

RESUMO

Abstract Purpose To develop 3D anatomical models, and corresponding radiographs, of canine jaw fractures. Methods A base model was generated from a mandibular bone scan. With this model it was possible to perform fracture planning according to the anatomical location. Results The 3D base model of the canine mandible was similar in conformation to the natural bone, demonstrating structures such as canine tooth crowns, premolars and molars, mental foramina, body of the mandible, ramus of the mandible, masseteric fossa, the coronoid process, condylar process, and angular process. It was not possible to obtain detail of the crown of the incisor teeth, mandibular symphysis, and the medullary channel. Production of the 3D CJF model took 10.6 h, used 150.1 g of filament (ABS) and cost US$5.83. Conclusion The 3D canine jaw fractures models, which reproduced natural canine jaw fractures, and their respective radiographic images, are a possible source of educational material for the teaching of veterinary medicine.

Assuntos

RESUMO

The aim of this study was to describe the microstructure of the pigmented and depigmented hoof capsule of Girolando cattle by bi- and tridimensional microtomography and nanoindentation, analysing the possible relation between these findings and the susceptibility of such animals to podal diseases. To carry out the microtomography and the nanoindentation, duplicated samples were collected from the dorsal wall, abaxial wall and pre-bulbar sole of the hoof capsule. Material collection was performed in 40 medial digits of thoracic limbs and 40 lateral digits of pelvic limbs. The bidimensional microtomography showed that the dorsal wall of the thoracic and pelvic limbs presented higher density, followed by the abaxial wall, and finally by the sole, with the lowest density. Moreover, the hoof capsule of cows of Girolando breed is a compact, non-porous material, and constituted by extratubular and intratubular keratin. By the tridimensional microtomography, it was possible to measure the angles of the corneal tubules in relation to the periople and the claws in the different regions of the hoof capsule, which were 90° for the dorsal wall, 55° for the abaxial wall and 70° for the sole. The tridimensional microtomography also showed corneal tubules of different diameters: 17, 51, 85, 119 and 153 µm. The nanoindentation test, when performed in different regions of the hoof capsule, did not reveal significant difference of Vickers hardness in the evaluated areas. However, we verified a larger elastic module of these regions on the transversal cut of the corneal tubules compared to the longitudinal cut.

Assuntos

RESUMO

Dactylogyridae is overwhelmingly the most abundant and diverse taxon among monogeneans in continental waters of South America. Their small body size requires considerable sampling effort and training for collecting and identifying the worms from the gills, skin, nasal cavities, and other microhabitats. Indeed, diagnostic characteristics as sclerites and male copulatory complex are generally less than 100-µm long and are essential for taxonomic description and identification of species. Here, a combination of simple and routine methods for three-dimensional morphological studies on hard structures is proposed for dactylogirids: SDS treatment for clarification of specimens and enzymatic digestion with proteinase K for freeing sclerotized structures, followed by laser confocal microscopy. This method is applicable to fresh or fixed specimens and does not require staining or dehydration. Indeed, stable autofluorescence emission is detectable at 500-530 nm for bars, anchors, and male copulatory complex when excited by argon laser. Advantages of this protocol over previous methodologies for taking laser confocal images are discussed. Open access software for image processing was used for three-dimensional reconstruction of sclerotized structures generating models and full 360° rotation videos.

Assuntos

RESUMO

The aim of this study was to describe the microstructure of hoof capsules of the buffalo. In addition, the study emphasized the morphometric aspects of the horn tubules, the Vickers nanohardness of the dorsal and abaxial walls and sole of the digits of the thoracic and pelvic limbs of the buffalo. The abaxial wall in the thoracic and pelvic digits showed larger diameter of the horn tubules when compared to all dorsal wall and sole. In addition, the abaxial wall of the thoracic digits showed larger diameter of the horn tubules when compared with the pelvic digits. According to the three-dimensional microtomography, the dorsal wall was higher in density compared with the abaxial wall. The latter exhibited an intermediate density, while the sole showed the lowest density. The Vickers nanohardness test showed that there was no difference in hardness and resistance between the experienced regions. However, the elastic modulus was greater on the transversal section of the hoof capsule. In conclusion, the results of the current study show that modern technologies such as microtomography and subsequent imaging can be used to investigate details of the basic morphology in different regions of the buffalo's hoof.

Assuntos

RESUMO

Single-photon emission computed tomography (SPECT) is a non-invasive imaging technique, which provides information reporting the functional states of tissues. SPECT imaging has been used as a diagnostic tool in several human disorders and can be used in animal models of diseases for physiopathological, genomic and drug discovery studies. However, most of the experimental models used in research involve rodents, which are at least one order of magnitude smaller in linear dimensions than man. Consequently, images of targets obtained with conventional gamma-cameras and collimators have poor spatial resolution and statistical quality. We review the methodological approaches developed in recent years in order to obtain images of small targets with good spatial resolution and sensitivity. Multipinhole, coded mask- and slit-based collimators are presented as alternative approaches to improve image quality. In combination with appropriate decoding algorithms, these collimators permit a significant reduction of the time needed to register the projections used to make 3-D representations of the volumetric distribution of target's radiotracers. Simultaneously, they can be used to minimize artifacts and blurring arising when single pinhole collimators are used. Representation images are presented, which illustrate the use of these collimators. We also comment on the use of coded masks to attain tomographic resolution with a single projection, as discussed by some investigators since their introduction to obtain near-field images. We conclude this review by showing that the use of appropriate hardware and software tools adapted to conventional gamma-cameras can be of great help in obtaining relevant functional information in experiments using small animals.

Assuntos

RESUMO

Single-photon emission computed tomography (SPECT) is a non-invasive imaging technique, which provides information reporting the functional states of tissues. SPECT imaging has been used as a diagnostic tool in several human disorders and can be used in animal models of diseases for physiopathological, genomic and drug discovery studies. However, most of the experimental models used in research involve rodents, which are at least one order of magnitude smaller in linear dimensions than man. Consequently, images of targets obtained with conventional gamma-cameras and collimators have poor spatial resolution and statistical quality. We review the methodological approaches developed in recent years in order to obtain images of small targets with good spatial resolution and sensitivity. Multipinhole, coded mask- and slit-based collimators are presented as alternative approaches to improve image quality. In combination with appropriate decoding algorithms, these collimators permit a significant reduction of the time needed to register the projections used to make 3-D representations of the volumetric distribution of target’s radiotracers. Simultaneously, they can be used to minimize artifacts and blurring arising when single pinhole collimators are used. Representation images are presented, which illustrate the use of these collimators. We also comment on the use of coded masks to attain tomographic resolution with a single projection, as discussed by some investigators since their introduction to obtain near-field images. We conclude this review by showing that the use of appropriate hardware and software tools adapted to conventional gamma-cameras can be of great help in obtaining relevant functional information in experiments using small animals.

Assuntos

RESUMO

Gestational period in a bitch, after natural mating with a normal dog, was evaluated by two-dimensional conventional, high-resolution two-dimensional and three-dimensional ultrasonography. High-resolution two-dimensional ultrasonography show better image and provides early diagnosis of pregnancy (15 days) in comparison to conventional one (20 days). Three-dimensional ultrasonography was use to evaluate fetal morphology during late gestation period, however its application is still limited

Assuntos

RESUMO

Gestational period in a bitch, after natural mating with a normal dog, was evaluated by two-dimensional conventional, high-resolution two-dimensional and three-dimensional ultrasonography. High-resolution two-dimensional ultrasonography show better image and provides early diagnosis of pregnancy (15 days) in comparison to conventional one (20 days). Three-dimensional ultrasonography was use to evaluate fetal morphology during late gestation period, however its application is still limited(AU)

Assuntos

RESUMO

Codakine is a new Ca(2+)-dependent mannose-binding C-type lectin (MBL) isolated from the gill tissue of the tropical clam, Codakia orbicularis. Bioinformatic analyses with the BLAST program have revealed similarities with marine lectins involved in immunity whose three-dimensional (3D) structures were unknown up until recently. In this article, we present bioinformatic analyses of marine lectins that are homologous to codakine, in particular lectins from the sea worm Laxus oneistus, named mermaid. These lectins are involved in the symbiotic association with sulphur-oxidizing bacteria which are closely related to the C. orbicularis gill symbiont. Using homology modelling, folding that is characteristic of C-type lectins was observed in all the marine Ca(2+)-dependent lectins studied, with conservation of random coiled structures of the carbohydrate recognition domain (CRD) and Ca(2+)-binding sites. Like codakine, the marine lectins analysed contain a signal peptide commonly found in secreted and transmembrane proteins. The majority of the predictive 3D models established from the lectins exhibit a common feature, namely the involvement in invertebrate and vertebrate immunity (dendritic cell receptor, macrophage receptor, etc.). These bioinformatic analyses and the literature data support the hypothesis that codakine, like the L. oneistus mermaids, is probably involved in the cellular mediation of symbiosis and defence against pathogenic microorganisms.

Assuntos