RESUMO
BACKGROUND: Occlusal veneer had been evaluated for mechanical properties using lithium disillicate. However, studies evaluating the mechanical properties of occlusal veneer with different preparation designs and ceramic materials are lacking. So, this in vitro study aimed to evaluate the fracture resistance of occlusal veneers with two designs fabricated from two different ceramic materials. MATERIAL AND METHODS: Fourty mandibular third molars were distributed to 2 groups (n = 20) according to preparation design: group (O) anatomical occlusal reduction and group (OA) anatomical occlusal and 1 mm axial reduction. Each group was additionally subdivided into two subgroups (n = 10) according to ceramic materials; in subgroup X, lithium disilicate (e.max CAD, Ivoclar AG, Schaan, Liechtenstein) was used, and in subgroup S, zirconia-reinforced lithium silicate (ZLS) (Vita Suprinity, VitaZahnfabrik, Bad Säckingen, Germany) was used. All specimens were cemented with a light-cure resin cement (Choice 2, Bisco, Schaumburg, USA). 5000 thermocycles were applied to all specimens with both temperatures of 5 °C and 55 °C in two water baths; the dwell time was 30s at each bath, and the transfer time was 10s. Then all specimens were subjected to a fatigue simulation under dynamic loading of 200 N for 250,000 cycles. A universal testing machine (5500R/1123, Instron, Norwood, USA) was used to evaluate the fracture strength with a crosshead speed of 1 mm/min. All data were analyzed statistically by using a two-way ANOVA, and for some violations of assumptions, these results were compared with those obtained by the nonparametric test (Scheirer Ray Hare) (α = 0.05). RESULTS: A statistically significantly higher fracture resistance in the 'OA' (3389 N) compared to the 'O' (2787 N) group regardless of the ceramic material (P < .001) and a statistically significantly higher fracture resistance in the 'X' (3295 N) compared to the 'S' (2881 N) regardless of the preparation design (P = .015). CONCLUSIONS: For occlusal veneers, all preparation designs and materials (such as Vita Suprinity and e.max CAD) had clinically acceptable fracture resistance values that were greater than the maximal biting forces. On the other hand, the e.max CAD with occlusal veneer, including axial reduction design, demonstrated the maximum fracture resistance value. Finally, no relationship between fracture strength and mode of failure was found.
Assuntos
Desenho Assistido por Computador , Porcelana Dentária , Análise do Estresse Dentário , Facetas Dentárias , Humanos , Porcelana Dentária/química , Técnicas In Vitro , Fraturas dos Dentes/prevenção & controle , Zircônio/química , Cerâmica/química , Teste de Materiais , Planejamento de Prótese Dentária , Falha de Restauração Dentária , Dente Molar , Dente SerotinoRESUMO
AIM: To investigate the root number and morphology of the maxillary second molars in the Syrian population besides bilateral symmetry, and the effect of gender. METHODS: 250 Cone Beam Computed Tomography (CBCT) images (140 females, 110 males) were examined by two endodontists. The detailed analysis included the number of roots, the number of canals and their configurations, bilateral symmetry, and relation to gender. The evaluation was made according to Vertucci classification by analyzing the CBCT images at all levels (Axial, Coronal, Sagittal, Oblique, and 3D). The Chi-square statistical analysis was performed to compare the canals' morphologies and bilateral symmetry in both genders via SPSS. RESULT: The most common shape of the upper second molars is three roots (90.4%). There were significant differences between males and females regarding the symmetry of the number of roots (P < 0.05). The root canal configuration was mainly Vertucci type I classification in the Distobuccally (93.4%) and palatal root (99.6%). The most common type in the mesial root was type I (29.5%), showing all varieties of Vertucci classifications (except VII, and VIII) percentage of MB2 of 70.5%. The ratio of symmetry was (59.6%) with no significant statistical difference between the genders (P = 0.708). CONCLUSION: Most maxillary second molars in the examined Syrian population were types (II) (associated with MB2 cases with three roots and four canals). In terms of symmetry, the number of roots surpassed the canal configuration. Males had a greater symmetrical tendency in the number of roots than females.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Cavidade Pulpar , Maxila , Dente Molar , Raiz Dentária , Humanos , Tomografia Computadorizada de Feixe Cônico/métodos , Masculino , Feminino , Síria , Dente Molar/diagnóstico por imagem , Dente Molar/anatomia & histologia , Raiz Dentária/diagnóstico por imagem , Raiz Dentária/anatomia & histologia , Maxila/diagnóstico por imagem , Maxila/anatomia & histologia , Cavidade Pulpar/diagnóstico por imagem , Cavidade Pulpar/anatomia & histologia , Adulto , Fatores Sexuais , Adulto Jovem , Adolescente , Pessoa de Meia-IdadeRESUMO
BACKGROUND: The aim of this study was to compare postoperative pain following total pulpotomy (TP) and root canal treatment (RCT) in mature molar teeth with irreversible pulpitis. To compare the traditional pulpitis classification system with the Wolters system in evaluating postoperative pain. METHODS: Eighty mandibular molars with irreversible pulpitis were included and classified according to the Wolters (moderate/severe pulpitis). The teeth were randomly assigned to two groups (RCT or TP). RCT was performed following standardized protocols. TP was performed to the level of the canal orifices, and hemostasis was achieved with 2.5% sodium hypochlorite. A 3 mm layer of MTA was placed as the pulpotomy material. The teeth were restored with glass ionomer cement followed by composite. Pain scores were recorded preoperatively and, at 6, 12, 24, 48, and 72 h and 7 days after the interventions. The data were statistically analyzed using the Mann-Whitney U test, the Friedman test, the Wilcoxon signed-rank test, and the Spearman's correlation test. The significance level was set at 0.05. RESULTS: Sixty-four patients were analyzed at the one-week follow-up and all were diagnosed as irreversible pulpitis according to the AAE; 22 teeth were classified as moderate and 42 teeth were classified as severe pulpitis according to Wolters. There was no significant difference between TP and RCT in pain scores in moderate pulpitis patients (p > 0.05). There was a significant difference between TP and RCT at 24 and 72 h of severe pulpitis; higher pain scores were observed in the RCT (p < 0.05). CONCLUSIONS: In patients with moderate pulpitis, the TP procedure allowed symptom relief more quickly than RCT. In patients with severe pulpitis, TP provided for significantly lower pain scores compared to RCT at both 24 and 72 h. CLINICAL TRIAL REGISTRATION: The study was retrospectively registered with ClinicalTrials.gov (NCT05923619). Date of Registration: 06/16/23.
Assuntos
Dente Molar , Medição da Dor , Dor Pós-Operatória , Pulpite , Pulpotomia , Tratamento do Canal Radicular , Humanos , Pulpite/cirurgia , Pulpite/terapia , Pulpotomia/métodos , Dor Pós-Operatória/etiologia , Dor Pós-Operatória/classificação , Dente Molar/cirurgia , Estudos Prospectivos , Feminino , Masculino , Tratamento do Canal Radicular/efeitos adversos , Tratamento do Canal Radicular/métodos , Adulto , Adulto Jovem , Materiais Restauradores do Canal Radicular/uso terapêutico , Seguimentos , Silicatos/uso terapêutico , Combinação de Medicamentos , Pessoa de Meia-Idade , Óxidos/uso terapêutico , Compostos de Alumínio/uso terapêutico , Cimentos de Ionômeros de Vidro , Compostos de Cálcio/uso terapêutico , Restauração Dentária Permanente/métodos , Resinas Compostas , Hipoclorito de Sódio/uso terapêuticoRESUMO
The present cross-sectional study was conducted to evaluate various caries risk factors in children from low socio-economic groups and to assess if children with broad contacts between one or more primary molars (type I and S) should be categorized as at high caries risk. Clinical examinations were performed on 107, 3- to 10-year-old children from low socio-economic settings. Contact types along with other caries risk factors (insurance, diet, plaque, and fluoride use, and diet habits) were analyzed for effect on presence of caries lesions (prevalence) and caries experience (decayed, missing, filled teeth). 78% of the study population had dental caries lesions, with an average dmft of 5.6. Of the 277 evaluated contacts, 88% were categorized as broad contacts. Multivariate analyses failed to validate that broad contacts were a predictor of dental caries lesions. However, the analysis showed an association of insurance status, plaque index with dmft. In conclusion, the present study could not implicate broad contacts as a factor that increased caries risk in the studied population; however, it validates the importance of insurance status, plaque index, as well as diet frequency as predictors of dental caries lesions.
Assuntos
Cárie Dentária , Pobreza , Humanos , Cárie Dentária/epidemiologia , Criança , Projetos Piloto , Fatores de Risco , Estudos Transversais , Pré-Escolar , Masculino , Feminino , Índice CPO , Índice de Placa Dentária , Comportamento Alimentar , Dente Decíduo , Prevalência , Dieta , Dente Molar , Fluoretos/uso terapêutico , Cobertura do SeguroRESUMO
Evaluation of micro tensile bond strength (µTBS) and marginal leakage of sodium fluoride (NaF) and nano-hydroxyapatite (n-HA) modified universal adhesives (UAs) bonded using etch-and-rinse (ER) and self-etch (SE) bonding technique to the carious affected dentin (CAD). One hundred and twenty primary molars were prepared for CAD on the occlusal surface. The occlusal CAD surface was flattened and underwent a polishing procedure. The specimens were divided into six groups using a random allocation method based on the UAs applied and the mode of etching used (n = 20) Group A1: UAs (ER), Group B1: UAs (SE), Group A2: UAs (NaF) + ER, Group B2: UAs (NaF) + SE, Group A3: UA (n-HA) + ER and Group B3: UAs (n-HA) + SE. Composite restoration was placed and samples were thermocycled. Microleakage, µTBS, and failure mode assessment were performed using a dye penetration test, universal testing equipment, and stereomicroscope respectively. The µTBS and microleakage results (mean ± SD) were examined using analysis of the variance (ANOVA) and Tukey post hoc tests. Group B1 (UAs + SE) demonstrated the maximum scores of microleakage (25.14 ± 9.12 nm) and minimum recorded value of µTBS (14.16 ± 0.55 MPa). In contrast, Group A3 (UAs (n-HA) + ER) displayed a minimum value of marginal leakage (12.32 ± 6.33 nm) and maximum µTBS scores (19.22 ± 0.92 MPa). The outcomes of the intergroup comparison analysis showed that Group A2 (UAs (NaF) + ER), Group B2 (UAs (NaF) + SE), Group A3 (UA (n-HA) + ER) and Group B3 (UAs (n-HA) + SE) presented comparable outcomes of marginal seal outcomes and µTBS scores (p > 0.05). NaF and n-HA-modified UAs displayed favorable bond strength and minimum marginal leakage to the deciduous affected dentin surface.
Assuntos
Colagem Dentária , Cárie Dentária , Infiltração Dentária , Durapatita , Dente Molar , Nanopartículas , Fluoreto de Sódio , Resistência à Tração , Dente Decíduo , Humanos , Cárie Dentária/terapia , Durapatita/química , Colagem Dentária/métodos , Adesivos Dentinários/química , Teste de Materiais , Resinas Compostas/química , Cariostáticos , Cimentos DentáriosRESUMO
Information regarding the influence of resorption and glide paths on debris extrusion in primary teeth is lacking. Therefore, we evaluated debris extrusion with and without resorption and with and without the use of a path file in primary molar teeth prepared with ProTaper Ultimate (PTU) Prime and TruNatomy (TRN) Prime rotary file systems. Forty resorbed and forty non-resorbed primary molar teeth were collected. Both groups were divided into four subgroups (n = 10). The Eppendorf tubes were weighed pre-debris. The distal canals of the teeth were prepared with PTU Prime and TRN Prime file systems, with and without the use of path files. The debris-filled tubes were weighed, and the weight of only the extruded debris was calculated by subtraction. The data were analyzed using a three-way analysis of variance (ANOVA) test. The presence of tooth resorption significantly increased debris extrusion, and the use of a path file significantly decreased debris extrusion (p < 0.001). The binary and ternary interactions of the three evaluated parameters among the groups showed no significant differences in terms of the amount of debris extruded (p > 0.05). While debris extrusion was observed in all groups, the use of a glide path file in primary teeth before the preparation process resulted in less debris extrusion.
Assuntos
Dente Molar , Preparo de Canal Radicular , Dente Decíduo , Humanos , Preparo de Canal Radicular/instrumentação , Preparo de Canal Radicular/métodos , Reabsorção da Raiz/etiologia , Desenho de Equipamento , Ápice Dentário/patologia , Instrumentos Odontológicos , Reabsorção de Dente , NíquelRESUMO
The accomplishment of a successful pulpectomy depends on multiple factors that involve targeted removal of the causative irritants and soft and hard tissue debris by mechanical and chemical means. Compare and evaluate the efficacy of canal preparation and volumetric filling using conventional files and two rotary file systems using cone beam computed tomography (CBCT). Thirty freshly extracted human primary second molars were randomly divided into three groups of 10 teeth each. After access opening and working length determination, pre-operative volume analysis was done using CBCT. The canals were then instrumented by either hand K-files, ProTaper rotary files or Kedo-SG Blue rotary files. Post-operative volume analysis was performed using CBCT. All the canals were obturated using Metapex and scanned again using CBCT. Mean values of the pre- and post-operative canal volumes were analyzed using one-way Analysis of Variance (ANOVA). Inter- and intra-group volumetric changes were analyzed statistically using a post hoc test. The mean difference in volume after canal preparation and obturation was the highest in the Kedo-SG Blue group, followed by the ProTaper group and the least in the hand K group (p = 0.001). Inter-group comparison showed statistically significant differences between the hand K group and ProTaper group (p = 0.001), the ProTaper group and Kedo-SG Blue group (p = 0.001), and the hand-K group and Kedo-SG Blue group (p = 0.02). The volume of preparation and obturation was the highest using Kedo-SG Blue, followed by the ProTaper file systems.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Dente Molar , Pulpectomia , Obturação do Canal Radicular , Preparo de Canal Radicular , Dente Decíduo , Humanos , Tomografia Computadorizada de Feixe Cônico/métodos , Dente Molar/diagnóstico por imagem , Dente Molar/cirurgia , Preparo de Canal Radicular/métodos , Preparo de Canal Radicular/instrumentação , Dente Decíduo/diagnóstico por imagem , Dente Decíduo/cirurgia , Obturação do Canal Radicular/métodos , Pulpectomia/métodos , Técnicas In Vitro , Instrumentos Odontológicos , Cavidade Pulpar/diagnóstico por imagem , Cavidade Pulpar/cirurgia , Materiais Restauradores do Canal Radicular/uso terapêutico , Desenho de EquipamentoRESUMO
This study compares the clinical efficacy of erbium-doped:yttrium-aluminium-garnet (Er:YAG) laser and traditional dental turbine in caries removal in children. The study cohort comprised 78 children aged 5 to 10 years with caries in two symmetrical maxillary molars. Different carious sides of the same child were randomly divided into control and observed sides. For each child, the caries on the control side were treated with a traditional dental turbine, while the observed side was treated with an Er:YAG laser. The study evaluated the use of anesthetics, pain levels, tooth hypersensitivity and the occurrence and severity of tooth fractures during caries removal with different methods. Additionally, the clinical anxiety and cooperative behavior of the children were observed. The time required for caries removal and cavity preparation by both methods was recorded, and the success rate of treatment was assessed after one year of follow-up. The results indicated a significant reduction in the use of anesthetics, pain and the incidence and severity of tooth hypersensitivity with the use of Er:YAG laser (p < 0.05). No significant difference was found in the occurrence of tooth fractures between the two groups (p > 0.05). The children treated with Er:YAG laser demonstrated better clinical anxiety levels and cooperative behavior. However, the time required for cavity preparation was longer with the use of Er:YAG laser (p < 0.05). After a 12-month follow-up, there was no significant difference in the success rate of treatment between the two groups (p > 0.05). In conclusion, compared to the traditional dental turbine, the use of Er:YAG laser improves treatment comfort and cooperation in children with caries and reduces the need for intraoperative anesthetics.
Assuntos
Cárie Dentária , Lasers de Estado Sólido , Humanos , Lasers de Estado Sólido/uso terapêutico , Criança , Cárie Dentária/terapia , Pré-Escolar , Feminino , Masculino , Preparo da Cavidade Dentária/métodos , Resultado do Tratamento , Fraturas dos Dentes , Ansiedade ao Tratamento Odontológico/prevenção & controle , Medição da Dor , Equipamentos Odontológicos de Alta Rotação , Dente MolarRESUMO
BACKGROUND: The aim of this trial was to evaluate the effect of a preoperative, single dose sublingual fast-dissolving piroxicam (20 mg) compared to placebo on postoperative pain at rest (POP), on biting (POPB) and on percussion (POPer) after single-visit endodontic treatment of asymptomatic mandibular molars with non-vital pulp. METHODS: Seventy patients randomly received either piroxicam or placebo 1 h before treatment (n = 35). Patients recorded their pain (POP and POPB) level 6 h, 12 h, 24 h, 48 h, 72 h and 7 days postoperatively using an 11-point numerical rating scale; POPer was assessed after 7 days. Resuce-analgesic intake (RAI) and flare-up incidence (FUI) were recorded. Data were statistically analyzed. RESULTS: Both groups had similar baseline characteristics (P > 0.05). Piroxicam showed less POP intensity and incidence than placebo at 6, 12 and 24 h, less POPB intensity and incidence at all timepoints, less POPer intensity and incidence and less RAI (p > 0.05), but similar FUI (P > 0.05). A significant rise in pain compared to baseline occurred with placebo from 6 to 72 h for POP and to 7 days with POPB (p > 0.05); such rise was not detected with piroxicam. POPB showed higher pain intensity than POP at all time points (p < 0.05). No swelling or adverse effects occured. CONCLUSIONS: A preoperative single dose of sublingual fast-dissolving piroxicam can be effective in reducing spontaneous pain up to 24 h, stimulated pain up to 7 days, and RAI incidence in asymptomatic mandibular molars with non-vital pulp; it can prevent rise in POP and POPB postoperatively. Stimulated postoperative pain can be more severe and longer lasting than spontaneous pain. TRIAL REGISTRATION: Clinicaltrials.gov ID: NCT03998826 (2019).
Assuntos
Dente Molar , Medição da Dor , Dor Pós-Operatória , Piroxicam , Pré-Medicação , Humanos , Dor Pós-Operatória/prevenção & controle , Dor Pós-Operatória/tratamento farmacológico , Método Duplo-Cego , Masculino , Feminino , Piroxicam/administração & dosagem , Adulto , Pré-Medicação/métodos , Administração Sublingual , Anti-Inflamatórios não Esteroides/administração & dosagem , Anti-Inflamatórios não Esteroides/uso terapêutico , Mandíbula/cirurgia , Adulto Jovem , Resultado do TratamentoRESUMO
OBJECTIVES: This study aimed to estimate the therapeutic effects of preformed metal crown (PMC) and prefabricated zirconia crowns (ZC) on decayed primary morals in children, as well as to analyze the possible influencing factors. METHODS: A retrospective cohort study was performed on the data of 192 patients (aged 3 to 8) in the Stomatological Department of Shenzhen Children's Hospital from October 2021 to December 2021. The decayed mandibular first molars were selected and restored by vital-pulp therapy followed by PMC and ZC, including 96 cases (96 caries) in the PMC group and 96 cases (96 caries) in the ZC group. Oral clinical examination was performed at 3 months, 1 year, and 2 years after treatment, overwiewing the clinical therapeutic effects and periodontal status of PMC and ZC groups, as well as recording the crown integrity, gingival index (GI), probing bleeding index (BI), plaque index (PLI) and various prosthetic indices. RESULTS: No significance differences existed in the periodontal status of PMC and ZC groups at 3 months, 1 year, and 2 years after treatment (P>0.05). However, the GI, BI, and PLI in the PMC group were higher than those in the ZC group at 3 months, 1 year, and 2 years after treatment, and the difference was dramatically significant (P<0.05). No significances difference existed in various prosthetic indices (P>0.05), as well as in the GI, BI, and PLI, between the two groups (P>0.05). No significant differences existed in various prosthetic indices between genders after PMC restoration (P>0.05). The scores of girls in various prosthetic indices after ZC restoration were higher than those of boys (P<0.05). Pearson correlation analysis indicated an inverse correlation between age in the PMC group and the GI, BI, PLI, and FDI indices (P<0.01), rather than in the ZC group (P>0.05). CONCLUSIONS: PMC and ZC can be applied to restore deciduous molar caries. The periodontal status of deciduous teeth in ZC group was superior to that in the PMC group. The periodontal status of deciduous teeth in PMC group may be stable with increased age.
Assuntos
Coroas , Cárie Dentária , Dente Molar , Dente Decíduo , Zircônio , Humanos , Estudos Retrospectivos , Criança , Pré-Escolar , Feminino , Masculino , Índice PeriodontalRESUMO
BACKGROUND: The molecular mechanisms and signaling pathways involved in tooth morphogenesis have been the research focus in the fields of tooth and bone development. However, the cell population in molars at the late bell stage and the mechanisms of hard tissue formation and mineralization remain limited knowledge. RESULTS: Here, we used the rat mandibular first and second molars as models to perform single-cell RNA sequencing (scRNA-seq) analysis to investigate cell identity and driver genes related to dental mesenchymal cell differentiation during the late bell hard tissue formation stage. We identified seven main cell types and investigated the heterogeneity of mesenchymal cells. Subsequently, we identified novel cell marker genes, including Pclo in dental follicle cells, Wnt10a in pre-odontoblasts, Fst and Igfbp2 in periodontal ligament cells, and validated the expression of Igfbp3 in the apical pulp. The dynamic model revealed three differentiation trajectories within mesenchymal cells, originating from two types of dental follicle cells and apical pulp cells. Apical pulp cell differentiation is associated with the genes Ptn and Satb2, while dental follicle cell differentiation is associated with the genes Tnc, Vim, Slc26a7, and Fgfr1. Cluster-specific regulons were analyzed by pySCENIC. In addition, the odontogenic function of driver gene TNC was verified in the odontoblastic differentiation of human dental pulp stem cells. The expression of osteoclast differentiation factors was found to be increased in macrophages of the mandibular first molar. CONCLUSIONS: Our results revealed the cell heterogeneity of molars in the late bell stage and identified driver genes associated with dental mesenchymal cell differentiation. These findings provide potential targets for diagnosing dental hard tissue diseases and tooth regeneration.
Assuntos
Diferenciação Celular , Células-Tronco Mesenquimais , Dente Molar , RNA-Seq , Análise de Célula Única , Animais , Diferenciação Celular/genética , Ratos , Análise de Célula Única/métodos , Células-Tronco Mesenquimais/metabolismo , Células-Tronco Mesenquimais/citologia , RNA-Seq/métodos , Odontogênese/genética , Análise da Expressão Gênica de Célula ÚnicaRESUMO
BACKGROUND: This investigation compared the extent of external apical root resorption (EARR) in root-filled teeth (RFT) and their contralateral vital pulp teeth (VPT) counterparts during orthodontic treatment (OT) with clear aligner (CA) treatment or fixed appliance (FA) treatment. METHODS: Sixty-six patients with similar baseline American Board of Orthodontics (ABO) discrepancy index scores were divided into two groups: 37 patients (21 females, 16 males; mean age 17.45 ± 2.67 years) in the FA group, and 29 patients (18 females, 11 males; mean age 18.33 ± 1.96 years) in the CA group. Digital panoramic radiographs captured pre- and post-OT were used to measure tooth lengths and root surface measurements in mandibular molars. EARR in both RFT and contralateral VPT was evaluated pre- and post-OT. Statistical analysis employed paired t-tests, independent t-tests, and analysis of covariance (ANCOVA) (p < .05). RESULTS: All teeth exhibited varying degrees of EARR following OT. FA treatment resulted in significantly longer treatment duration (p < .05) and greater EARR compared to CA treatment (p < .05). Moreover, statistically significant differences in EARR were observed within both groups between RFT and VPT (p < .05). CONCLUSIONS: Comparison of pre- and post-OT radiographs revealed different degrees of EARR in all teeth. CA treatment resulted in less frequent and less severe EARR compared to FA treatment. RFT demonstrated greater resistance to EARR than VPT in both treatment groups.
Assuntos
Mandíbula , Dente Molar , Aparelhos Ortodônticos Fixos , Radiografia Panorâmica , Reabsorção da Raiz , Humanos , Feminino , Masculino , Reabsorção da Raiz/diagnóstico por imagem , Reabsorção da Raiz/etiologia , Dente Molar/diagnóstico por imagem , Adolescente , Mandíbula/diagnóstico por imagem , Adulto Jovem , Dente não Vital/diagnóstico por imagem , Dente não Vital/terapia , Ápice Dentário/diagnóstico por imagem , Ortodontia Corretiva/efeitos adversos , Ortodontia Corretiva/instrumentação , Ortodontia Corretiva/métodosRESUMO
BACKGROUND: To investigate the anatomic features of the root furcation of permanent mandibular first molars. METHODS: A total of 50 extracted mandibular first molars (25 two-rooted and 25 three-rooted) were collected and scanned using micro-computed tomography. The digital models of teeth and root canal systems were reconstructed three-dimensionally. The tooth models were displayed in parallel projection mode from buccal and distal views. Screenshots were captured and subsequently analyzed using Image-Pro Plus 6.0 software after calibration. The furcation angle, root trunk length, maximum depth and level of distal root concaves of mesial roots, and length of enamel projections were measured, and the furcation types (classified into type V, type U and type W) were detected. Statistical analysis was performed using the Shapiro-Wilk's test, one-way analysis of variance, Student's t-test and Chi-square test. RESULTS: The mean furcation angle between the distobuccal (DB) and distolingual (DL) roots (in distal view) was the greatest (59.2°), whereas the furcation angle between the mesial and DL roots (in buccal view) was the smallest (25.4°) among the four furcation angles (all p < 0.05). Regarding the furcation types, bucco-lingual root trunk length, maximum depth and site of the distal root concavities, and enamel projection length, no significant differences were detected between the three- and two-rooted molar groups (all p > 0.05). The frequency of type V was the highest (54.0%), followed by type U (26.0%), and type W had the lowest occurrence rate (20.0%). The mean length of distal root trunk in the three-rooted mandibular molars was significantly greater than that of the buccal/lingual one (3.7 mm vs. 3.0 mm, p < 0.01). The maximum depth of the distal concavities of the mesial roots was on average 0.66 ± 0.19 mm, and the site was located at an average of 2.8 ± 1.3 mm below furcation. The mean length of buccal enamel projections was significantly longer than that of lingual ones (3.1 mm vs. 0.7 mm, p < 0.01). CONCLUSIONS: The furcation anatomy of the mandibular first molar is complex, and the presence of the DL root may further complicate its topography. A thorough understanding of these anatomic features is essential for successful periodontal treatment.
Assuntos
Mandíbula , Dente Molar , Raiz Dentária , Microtomografia por Raio-X , Dente Molar/diagnóstico por imagem , Dente Molar/anatomia & histologia , Microtomografia por Raio-X/métodos , Humanos , Raiz Dentária/diagnóstico por imagem , Raiz Dentária/anatomia & histologia , Mandíbula/diagnóstico por imagem , Mandíbula/anatomia & histologia , Imageamento Tridimensional/métodosRESUMO
OBJECTIVE: This study aimed to determine the survival of class II composite restorations in premolars and molars with and without base bulk-fill composite in general dental practice. MATERIALS AND METHODS: We collected data from the electronic patient files of the Public Dental Services in the City of Oulu, Finland. The timespan of data collection was from August 15th, 2002, to August 9th, 2018. The data consisted of class II composite restorations both with and without base bulk-fill composite. We compared the survival of these restorations using Kaplan-Meier survival curves, the log-rank test, survival rates, and the Wilcoxon signed ranks test. RESULTS: We observed 297 restorations in 96 patients. The five-year survival rates for restorations with and without base bulk-fill composite were comparable in premolars (77.5% and 77.4%, respectively) but different in molars (69.9% and 57.8%, respectively, p = 0.069). In molars, the restorations with base bulk-fill composite exhibited a higher survival rate in 14 patients, whereas in 11 patients the restorations without base bulk-fill composites exhibited a higher survival rate. In 24 patients the survival rates were similar for restorations with and without the base bulk-fill composite (p = 0.246). CONCLUSIONS: The restorations with and without base bulk-fill composite had similar longevity. CLINICAL RELEVANCE: Base bulk-fill composites are safe to use in general practice due to their similar survival rates compared to conventional composites.
Assuntos
Dente Pré-Molar , Resinas Compostas , Falha de Restauração Dentária , Restauração Dentária Permanente , Humanos , Feminino , Estudos Retrospectivos , Masculino , Pessoa de Meia-Idade , Adulto , Finlândia , Dente Molar , IdosoRESUMO
BACKGROUND: Shortening retention time and minimizing relapse rates are ongoing challenges in orthodontics. This study investigated the effects of natural fulvic acids (FAs) and low-level laser therapy (LLLT) on orthodontic retention in rats. METHODS: Seventy-two male Sprague-Dawley rats underwent mesial movement of the left maxillary first molar using a 50 g force via a nickel-titanium tension spring. After three weeks of movement, the rats entered the retention phase with retainer wires and were divided into four groups: Control (no intervention), FAs (80 mg/kg orally daily), LLLT (808 nm laser twice weekly), and FAs + LLLT (both treatments). Retainers were removed on days 7, 14, and 21 for a 3-day relapse assessment. Maxillary impressions were analyzed for relapse rates using 3Shape software, alongside histological and immunohistochemical evaluations of bone morphogenetic protein-2 (BMP-2) expression in periodontal tissues, with differences among groups analyzed using an ordinary two-way analysis of variance (ANOVA). RESULTS: The relapse rate decreased over time, particularly at 10, 17, and 24 days (p < 0.001). The FAs group did not significantly affect relapse rates compared to the control group (p = 0.084). In contrast, both the LLLT and FAs + LLLT groups significantly reduced relapse rate (p < 0.001), with no significant difference between these groups (p = 0.555). Histological examination revealed active osteoclasts on day 10, decreasing by days 17 and 24. The LLLT and FAs + LLLT groups showed less local cementum resorption and better periodontal fiber arrangement. All treatment groups significantly increased BMP-2 expression (P < 0.05) compared to controls. with LLLT and FAs + LLLT differing significantly from FAs (P < 0.001), though no difference was observed between LLLT and FAs + LLLT (P = 0.578). CONCLUSIONS: FAs did not significantly reduce relapse rate with retainers, while LLLT effectively reduced relapse rates, showing no additional benefit from combining FAs with LLLT. Both FAs and LLLT increased BMP-2 expression in PDL fibroblasts but with no synergistic effect.
Assuntos
Benzopiranos , Proteína Morfogenética Óssea 2 , Terapia com Luz de Baixa Intensidade , Ratos Sprague-Dawley , Técnicas de Movimentação Dentária , Animais , Ratos , Masculino , Terapia com Luz de Baixa Intensidade/métodos , Técnicas de Movimentação Dentária/métodos , Benzopiranos/uso terapêutico , Benzopiranos/farmacologia , Contenções Ortodônticas , Fios Ortodônticos , Ligamento Periodontal/efeitos da radiação , Ligamento Periodontal/patologia , Dente MolarRESUMO
OBJECTIVE: Purpose of this research was to examine the onset, progression and wear rates of dental erosion in an established mouse model. MATERIAL AND METHODS: Dental erosion in mice was experimentally induced, and the acidic effects of cola drink on their teeth after 2, 4 and 6-weeks were closely analysed by scanning electron microscopy. The tooth height and enamel or dentin loss were established. Results: The dental erosion on the molars showed clear progression from 2 to 6 weeks. By the 2-week mark, a significant portion of enamel was already eroded, revealing the dentin on the lingual cusps. When adjusted for attritional wear, molars exposed to cola for 2 weeks showed a 35% drop in lingual tooth height compared to controls (533 µm vs. 818 µm). At 4 and 6 weeks, the cola-exposed group continued to display decreased lingual tooth heights by 40% (476 µm vs. 799 µm) and 43% (440 µm vs. 767 µm), respectively. CONCLUSION: This study revealed significant acidic effects of cola drink on mouse molars as early as 2 weeks. These findings highlight the challenge of monitoring dental erosion clinically and underscore the importance of early preventive and intervention measures.
Assuntos
Modelos Animais de Doenças , Progressão da Doença , Erosão Dentária , Animais , Erosão Dentária/etiologia , Erosão Dentária/patologia , Camundongos , Microscopia Eletrônica de Varredura , Bebidas Gaseificadas/efeitos adversos , Dente Molar , Masculino , Esmalte Dentário/efeitos dos fármacos , Esmalte Dentário/patologiaRESUMO
Minimally invasive access cavities have been proposed in the last decade to reduce tooth tissue loss during endodontic treatment and mitigate compromised fracture resistance of endodontically treated teeth. Fracture resistance of molars with different types of access cavity design may be affected by restorative materials and aging. Insufficient literature data exist on the effect of cavity design and type of restorative materials on restorative aspects such as material adaptation or photo-polymerization in restricted access cavities. This study analyses quality of polymerization, material adaptation and fracture resistance of molars with different types of access cavities restored with glass-ionomer, high-viscosity fiber-reinforced bulk-fill and nanofilled resin composite. Plastic molar teeth with truss (TREC) and traditional endodontic access cavity (TEC) were restored with nanofilled composite (Filtek Supreme), glass-ionomer Fuji IX and Filtek or fiber-reinforced everX Posterior and Filtek. Porosity was determined using microcomputer tomography and the degree of conversion of resin-based materals using micro-Raman spectroscopy. Human molars prepared and restored in the same way were used for fracture resistance testing at baseline and after thermocycling. The results demonstrate that high-viscosity fiber-reinforced composite was difficult to adapt in TREC cavity leading to greater porosity than Filtek or Fuji. TREC design did not affect composite polymerization and led to higher fracture resistance of restored molars compared to TEC but also more unrestorable fractures.
Assuntos
Resinas Compostas , Dente Molar , Polimerização , Fraturas dos Dentes , Humanos , Porosidade , Resinas Compostas/química , Cavidade PulparRESUMO
The phylogenetic relationships of the small-bodied catarrhine Pliobates cataloniae (â¼11.6 Ma, NE Iberian Peninsula) have been controversial since its original description. However, the recent report of additional dentognathic remains has supported its crouzeliid pliopithecoid status. Based on the available hypodigm, the molar enamel-dentine junction (EDJ) shape of P. cataloniae is compared with that of other pliopithecoids from the same basin as well as both extinct and extant hominoids to further evaluate its pliopithecoid affinities. We also quantitatively compare the EDJ shape among these taxa by means of landmark-based three-dimensional geometric morphometrics using principal component analysis (PCA), canonical variate analysis, and between-group PCA. Permutation tests are performed to test whether Pliobates variation exceeds that of extant hominoid genera. Results indicate that Pliobates is similar in molar EDJ shape to other pliopithecoids, particularly crouzeliids. The variation displayed by Pliobates upper molars is less marked at the EDJ level than at the outer enamel surface, probably owing to differential enamel wear and intraspecific differences in enamel thickness. Multivariate analyses of EDJ shape show that all pliopithecoids (including Pliobates) cluster together in the PCAs, canonical variate analyses, and between-group PCAs and occupy a different portion of the morphospaces from extinct and extant hominoids. Posterior and typicality probabilities strongly support the classification of Pliobates as a pliopithecoid, wheras permutation tests fail to reject the single-genus hypothesis for the P. cataloniae hypodigm. We conclude that P. cataloniae is a crouzeliid pliopithecoid, as recently supported by cladistic analyses of craniodental characters, and that previous cladistic results that supported a stem hominoid status are attributable to postcranial convergences with crown hominoids. Our results further highlight the potential of three-dimensional geometric morphometrics analyses of the EDJ shape for better informing fossil primate alpha-taxonomy by means of quantitatively testing hypotheses about tooth shape variation.
Assuntos
Esmalte Dentário , Fósseis , Dente Molar , Animais , Dente Molar/anatomia & histologia , Esmalte Dentário/anatomia & histologia , Fósseis/anatomia & histologia , Espanha , Dentina/anatomia & histologia , Catarrinos/anatomia & histologia , Catarrinos/classificação , Análise de Componente Principal , Filogenia , Hominidae/anatomia & histologia , Hominidae/classificaçãoRESUMO
This study aimed to assess the fatigue resistance of molars lacking a coronary remnant, using zero, one, two, or three fiberglass posts. Forty caries/crack-free human molars with coronal portions removed at the pulp chamber floor were randomly allocated into four groups (n=10). Following endodontic treatment, posts (Whitepost DC/DC.E 0.5, 1.0, FGM) were silanized (silane agent, Angelus) and cemented with a resin cement (RelyX U200, 3M ESPE). Resin composite cores (Z350, 3M ESPE) were built, and metal crowns were fabricated and cemented using the same luting system. Samples underwent cyclic fatigue testing at 45°, applying load in the occlusal surface at 10 Hz and 100 N initial load for 10,000 cycles, with 50 N increments every 10,000 cycles until failure. Fatigue failure load and cycles for failure data were recorded and subjected to survival analysis through Kaplan-Meier and Mantel-Cox post hoc tests, and Weibull analysis. Fractography patterns of failed crowns were qualitatively analyzed. The group without posts exhibited the lowest fatigue performance (p < 0.05) for both fatigue failure load and cycles to failure. Superior fatigue performance was observed in the three-post group, followed by groups with one or two posts, corroborated by the Weibull characteristic strength parameter. Weibull moduli were similar among conditions. All specimens exhibited failure involving detachment of the restorative set (posts/core/crown) with a portion of the dental remnant, without tooth fracture. Thus, when restoring mandibular molars without crown remnants, the use of fiberglass posts promotes greater fatigue resistance to oblique loads.
Assuntos
Vidro , Dente Molar , Técnica para Retentor Intrarradicular , Humanos , Análise do Estresse Dentário , Falha de Restauração Dentária , Coroas , Teste de MateriaisRESUMO
OBJECTIVE: The primary goal is to evaluate the effects of two different intracanal medicaments, calcium hydroxide [Ca(OH)2] and double antibiotic paste (DAP), on radiographic outcomes during regenerative endodontic procedures (REP) of immature permanent mandibular first molars with symptomatic irreversible pulpitis and symptomatic apical periodontitis (SIP/SAP). Additionally, the secondary goal was to evaluate MMP-8 levels during REP using two different intracanal medicaments. METHODOLOGY: The study included 20 patients with immature mandibular first molars exhibiting SIP/SAP. Participants were randomly assigned into two groups based on the applied intracanal medicament. Ca(OH)2 (n=10) was prepared by mixing it with sterile distilled water, while the same amount of powdered metronidazole and ciprofloxacin were mixed and combined with sterile distilled water for DAP (n=10). MMP-8 in periapical samples were measured at baseline and on the 14th day using immunofluorometric assay. Image-J software with TurboReg plug-in was utilized to determine changes in root length, root width, radiographic root area (RRA) during the 12-month follow-up period. Data were analyzed by SPSS 25.0 (p<.05). RESULTS: Significant increase in MMP-8 on the 14th day compared to baseline in both groups (p<0.001). There was no significant difference between the two groups in terms of the increase in MMP-8 (p>0.05). Root length significantly increased in both groups (p=0.001), with Ca(OH)2 showing a greater increase (p=0.046). Root width and RRA increased similarly in both groups at 12th month. CONCLUSION: Both Ca(OH)2 and DAP applications resulted in a significant increase in periapical MMP-8 levels. Increase in radiographic root width and root area was similar between two groups, but Ca(OH)2 led to a significantly greater increase in root length. Further studies with larger sample sizes are necessary to validate our findings during REP of vital immature permanent mandibular molars. Clinical Trials database: NCT05581706.