RESUMO
In this study, the interaction of the human hemoglobin with cost effective and chemically fabricated CdS quantum dots (QDs) (average sizes ≈3nm) has been investigated. The semiconductor QDs showed maximum visible absorption at 445 nm with excitonic formation and band gap of ≈ 2.88 eV along with hexagonal crystalline phase. The binding of QDs-Hb occurs through corona formation to the ground sate complex formation. The life time of the heme pocket binding and reorganization were found to be t1 = 43 min and t2 = 642 min, respectively. The emission quenching of the Hb has been indicated large energy transfer between CdS QDs and Hb with tertiary deformation of Hb. The binding thermodynamics showed highly exothermic nature. The ultrafast decay during corona formation was studied from TCSPC. The results showed that the energy transfer efficiency increases with the increase of the QDs concentration and maximum ≈71.5 % energy transfer occurs and average ultrafast lifetime varies from 5.45 ns to1.51 ns. The deformation and unfolding of the secondary structure of Hb with changes of the α-helix (≈74 % to ≈51.07 %) and ß-sheets (≈8.63 % to ≈10.25 %) have been observed from circular dichroism spectrum. The SAXS spectrum showed that the radius of gyration of CdS QDs-Hb bioconjugate increased (up to 23 ± 0.45 nm) with the increase of the concentration of QDs compare with pure Hb (11 ± 0.23 nm) and Hb becoming more unfolded.
Assuntos
Compostos de Cádmio , Transferência de Energia , Hemoglobinas , Desdobramento de Proteína , Pontos Quânticos , Sulfetos , Pontos Quânticos/química , Humanos , Compostos de Cádmio/química , Sulfetos/química , Sulfetos/metabolismo , Hemoglobinas/química , Hemoglobinas/metabolismo , Ligação Proteica , Termodinâmica , Espectrometria de Fluorescência , Dicroísmo CircularRESUMO
A nanoemulsion containing CdTe quantum dots (NE-CdTe-QD) was developed to shield cells from cadmium toxicity and shown to be a promising candidate for brain tumor diagnosis. CdTe-QD was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy. CdTe-QD exhibited high luminescence emission at 700 nm, and their stability was maintained when encapsulated in lipidic/polymeric nanoemulsions (198 ± 2.0 nm; PDI = 0.174; - 49.0 mV). The biological effects of free and nanoemulsified CdTe-QD were tested in normal cells (NHF) and glioblastoma cell lines (U87-MG and T98G). Membrane colocalization of NE-CdTe-QD by T98G cells was observed. Instead, intracellular endoplasmic reticulum localization of NE-CdTe-QD was verified in U87-MG cells. Cell viability was reduced only when NE-CdTe-QD permeated the membrane of GBM cells, as observed in U87-MG cells, whereas no cytotoxic effects were observed in normal fibroblasts. Incorporating quantum dots directly into the brain cells is difficult. However, the nanoemulsions reduced the toxicity of CdTe-QD in zebrafish larvae and increased their circulation time, and direct injection into the zebrafish brain did not affect neural cell viability. This validates the potential application of these nanomaterials as diagnostic agents and satisfies the necessary criteria for their use as photosensitizers in photodynamic therapy.
Assuntos
Compostos de Cádmio , Sobrevivência Celular , Emulsões , Pontos Quânticos , Telúrio , Peixe-Zebra , Pontos Quânticos/química , Telúrio/química , Animais , Compostos de Cádmio/química , Emulsões/química , Humanos , Sobrevivência Celular/efeitos dos fármacos , Linhagem Celular Tumoral , Neoplasias Encefálicas/tratamento farmacológico , Neoplasias Encefálicas/patologiaRESUMO
A ratiometric self-powered photoelectrochemical sensor based on laser direct writing technology was constructed to address the problem that the conventional single-signal detection mode was susceptible to the influence of instrumentation and environmental factors, which interfered with the detection results. Laser-induced CdS/TiO2/Graphene was prepared as dual photoanodes (PA1 and PA2), which were controlled by multiplexed switches to form a photocatalytic fuel cell with Pt cathode. By modifying the aptamer of aflatoxin B1 (AFB1) on the photoanode surface, the target was specifically captured to the electrode surface to form a biological complex, which increased the steric hindrance and affected the electron transfer, thus reducing the output signal of the sensor. Targets with different concentrations were incubated on the surface of PA1, and targets with fixed concentrations were incubated on the surface of PA2. Under the control of the multiplex switch, the output signals of the two photoanodes were recorded, and the ratio of these two signals was used as the basis for the quantitative detection of AFB1. The sensor output was linearly increasing with the logarithm of AFB1 concentration from 1.0 to 150 ng mL-1 and the detection limit was 0.0974 ng mL-1. Additionally, this method had good stability, fast response, and good selectivity to real samples, providing an effective method for food safety monitoring.
Assuntos
Aflatoxina B1 , Compostos de Cádmio , Técnicas Eletroquímicas , Eletrodos , Grafite , Lasers , Limite de Detecção , Sulfetos , Titânio , Aflatoxina B1/análise , Grafite/química , Titânio/química , Compostos de Cádmio/química , Técnicas Eletroquímicas/métodos , Técnicas Eletroquímicas/instrumentação , Sulfetos/química , Processos Fotoquímicos , Técnicas Biossensoriais/métodos , Aptâmeros de Nucleotídeos/química , Contaminação de Alimentos/análiseRESUMO
The common housefly, Musca domestica, known for transmitting over 100 infections, was studied using green-synthesized Cadmium Sulfide nanoparticles (CdS NPs) from Agaricus bisporus. These CdS NPs were tested on third-instar larvae under laboratory conditions using dipping and feeding methods with concentrations (75, 100, 125, 150, 175, and 200 µg/mL). The toxicity, measured by LC50, was found to be 138 µg/mL for dipping treatment and 123 µg/mL for feeding treatment. Analysis with an energy-dispersive X-ray microanalyzer confirmed Cd accumulation in the larval midgut, indicating penetration of CdS NPs into the organism, which may potentially increase their toxicity. CdS NPs caused disruptions in Heat Shock Protein 70, cell apoptosis, and various biochemical components. Scanning electron microscopy revealed morphological abnormalities in larvae, pupae, and adults exposed to CdS NPs. Ultrastructural examination showed significant midgut tissue abnormalities in larvae treated with 123 µg/mL of CdS NPs. Our study demonstrated that green-synthesized CdS NPs from A. bisporus can effectively control the development of M. domestica larvae.
Assuntos
Agaricus , Compostos de Cádmio , Moscas Domésticas , Larva , Sulfetos , Animais , Moscas Domésticas/efeitos dos fármacos , Sulfetos/química , Sulfetos/farmacologia , Compostos de Cádmio/toxicidade , Larva/efeitos dos fármacos , Nanopartículas Metálicas/química , Nanopartículas Metálicas/toxicidade , Nanopartículas/química , Modelos BiológicosRESUMO
The capped CdS-ZnS quantum dots (QDs) were synthesized with various thiol capping agents of glycolic acid (TGA), mercaptosuccinic acid (MSA), and L-cysteine (LCY) and used as fluorescence probe for determination of Cu (II) ions. The method of two-level three-factor full-factorial experiment design was used to achieve the best optical fluorescence emission. Results revealed that Cu (II) ions can effectively quench the emission of QDs, and the fluorescence intensity is linearly decreased with increasing Cu (II) ion concentration. The limit of detection for CdS-ZnS@ QDs capped with TGA, MSA, and LCY was obtained at 1.15 × 10-7, 1.32 × 10-7, and 2.19 × 10-7 mol L-1, respectively, with linear dynamic range of 3.13 × 10-6 to 1.41 × 10-4 mol L-1. Luminescence quantum yields of CdS-ZnS@LCY, CdS-ZnS@MSA, and CdS-ZnS@TGA were obtained at 4.17, 1.92, and 2.47, respectively. Results indicated that no significant quenching occurred in the presence of the other metal ions. The binding constant (Kb) of capped CdS-ZnS@ QDs with Cu2+ and the other metal ions was also investigated and discussed. The Kb value for Cu2+ was obtained considerably more than that the other ions. This work presents a new and sensitive method for determination of Cu2+ ion.
Assuntos
Compostos de Cádmio , Cobre , Corantes Fluorescentes , Pontos Quânticos , Compostos de Sulfidrila , Sulfetos , Propriedades de Superfície , Compostos de Zinco , Pontos Quânticos/química , Cobre/química , Cobre/análise , Sulfetos/química , Compostos de Zinco/química , Compostos de Cádmio/química , Compostos de Sulfidrila/química , Compostos de Sulfidrila/análise , Corantes Fluorescentes/química , Corantes Fluorescentes/síntese química , Espectrometria de Fluorescência , Fluorescência , Íons/química , Íons/análiseRESUMO
Loofah sponge-like carbon nanofibers (LF-Co,N/CNFs) were utilized as a carrier for Ru(bpy)32+, and then combined with CdS to create a novel solid-state electrochemiluminescence sensor capable of detecting trace amounts of fenpropathrin. LF-Co,N/CNFs, obtained through the high-temperature pyrolysis of ZIF-67 coaxial electrospinning fibers, were characterized by a loofah-like morphology and exhibited a significant specific surface area and porosity. Apart from serving as a carrier, LF-Co,N/CNFs also functioned as a luminescence accelerator, enhancing the system's luminescence efficiency by facilitating electron transmission and reducing the transmission distance. The inclusion of CdS in the luminescence reaction, in conjunction with Ru(bpy)32+, further boosted the sensor's luminescence signal. The resulting sensor demonstrated a satisfactory signal, with fenpropathrin causing significant quenching of the ECL signal. Under optimized conditions, a linear relationship between the signal quench value and fenpropathrin concentration in the range 1 × 10-12 to 1 × 10-6 M was observed, with a detection limit of 3.3 × 10-13 M (S/N = 3). This developed sensor is characterized by its simplicity, sensitivity, and successful application in detecting fenpropathrin in real samples. The study not only presents a straightforward detection platform for fenpropathrin but also introduces new avenues for the rapid determination of various food contaminants, thereby expanding the utility of carbon fibers in electrochemiluminescence sensors.
Assuntos
Carbono , Técnicas Eletroquímicas , Limite de Detecção , Medições Luminescentes , Nanofibras , Nanofibras/química , Medições Luminescentes/métodos , Carbono/química , Técnicas Eletroquímicas/métodos , Técnicas Eletroquímicas/instrumentação , Animais , Contaminação de Alimentos/análise , Compostos de Cádmio/química , Piretrinas/análise , Compostos OrganometálicosRESUMO
BRCA1 gene and carcinoembryonic antigen (CEA) are important markers of breast cancer, so accurate detection of them is significant for early detection and diagnosis of breast cancer. In this study, a potential-resolved ratio electrochemiluminescence (ECL) biosensor using perylene diimide (PDI)-metal-organic framework and DNA nanoflowers (NFs)-CdS quantum dots (QDs) was constructed for detection of BRCA1 and CEA. Specifically, PDI-MOF and CdS QDs can generate potential-resolved intense ECL signals only using one coreactant, so the detection procedure can be effectively simplified. PDI-MOF was first attached to the electrode by graphene oxide, and the dopamine (DA) probe was linked to quench the ECL signal by DNA hybridization. In the presence of target BRCA1, it can form a bipedal DNA walker, so the quenching molecules (DA) were detached from the electrode via the walker amplification process aided by Mg2+, so that the PDI signal at -0.25 V was restored for the BRCA1 assay. Moreover, CdS QDs@DNA NFs as amplified signal probes were formed by self-assembly, and the target CEA-amplified product introduced the CdS QDs@DNA NFs to the electrode, so the QD ECL signal at -1.42 V was enhanced, while the ECL signal of PDI is unchanged; thus, CEA detection was achieved by the ratio value between them. Therefore, the detection accuracy is guaranteed by detection of two cancer markers and a ratio value. This biosensor has a great contribution to the development of new ECL materials and a novel ECL technique for fast and efficient multitarget assays, showing great significance for the early monitoring and diagnosis of breast cancer.
Assuntos
Proteína BRCA1 , Técnicas Biossensoriais , Compostos de Cádmio , Antígeno Carcinoembrionário , DNA , Técnicas Eletroquímicas , Imidas , Medições Luminescentes , Perileno , Pontos Quânticos , Sulfetos , Perileno/química , Perileno/análogos & derivados , Pontos Quânticos/química , Compostos de Cádmio/química , Técnicas Biossensoriais/métodos , Sulfetos/química , Técnicas Eletroquímicas/métodos , Imidas/química , DNA/química , Humanos , Proteína BRCA1/genética , Proteína BRCA1/análise , Antígeno Carcinoembrionário/análise , Antígeno Carcinoembrionário/sangue , Estruturas Metalorgânicas/químicaRESUMO
Rapid and accurate diagnosis of tuberculosis (TB) is of great significance to control the spread of this devastating infectious disease. In this work, a sensitive and low-cost point-of-care testing (POCT) detection platform for TB was developed based on recombinase polymerase amplification (RPA)-catalytic hairpin assembly (CHA)-assisted dual signal amplification strategy. This platform could achieve homogeneous fluorescent and visual diagnosis of TB by using CdTe quantum dots (QDs) signal reporter. In the presence of target DNA (IS1081 gene fragment), RPA amplicons blocked by short oligonucleotide strands could trigger CHA signal amplification, leading to the Ag+ releasing from C-Ag+-C structure and the fluorescence quenching of CdTe QDs by the released Ag+. Furthermore, the detection performance of CdTe QDs modified by 3-mercaptopropionic acid (MPA) or thiomalic acid (TMA) (MPA-capped QDs and TMA-capped QDs) was systematically compared. Experimental results demonstrated that TMA-capped QDs exhibited better detection sensitivity due to their stronger interaction with Ag+. The limits of detection (LODs) of fluorescence and visual analysis were as low as 0.13 amol L-1 and 0.33 amol L-1. This method was successfully applied to the clinical sputum samples from 36 TB patients and 20 healthy individuals, and its quantitative results were highly consistent with those obtained by real-time fluorescent quantitative polymerase chain reaction (RT-qPCR). The proposed approach has the advantages of high sensitivity and specificity, simple operation and low cost, and is expected to be applied in clinical TB screening and diagnosis.
Assuntos
Técnicas Biossensoriais , Colorimetria , Limite de Detecção , Técnicas de Amplificação de Ácido Nucleico , Pontos Quânticos , Tuberculose , Pontos Quânticos/química , Humanos , Técnicas Biossensoriais/métodos , Colorimetria/métodos , Tuberculose/diagnóstico , Técnicas de Amplificação de Ácido Nucleico/métodos , Mycobacterium tuberculosis/isolamento & purificação , Mycobacterium tuberculosis/genética , Telúrio/química , Compostos de Cádmio/química , Sistemas Automatizados de Assistência Junto ao Leito , Prata/química , Espectrometria de Fluorescência/métodos , Testes Imediatos , FluorescênciaRESUMO
Abnormal expression in long noncoding RNAs (lncRNAs) is closely associated with cancers. Herein, a novel CRISPR/Cas13a-enhanced photocurrent-polarity-switching photoelectrochemical (PEC) biosensor was engineered for the joint detection of dual lncRNAs, using deep learning (DL) to assist in cancer diagnosis. After target lncRNA-activated CRISPR/Cas13a cleaves to induce DNAzyme bidirectional walkers with the help of cofactor Mg2+, nitrogen-doped carbon-Cu/Cu2O octahedra are introduced into the biosensor, producing a photocurrent in the opposite direction of CdS quantum dots (QDs). The developed PEC biosensor shows high specificity and sensitivity with limits of detection down to 25.5 aM for lncRNA HOTAIR and 53.1 aM for lncRNA MALAT1. More importantly, this platform for the lncRNA joint assay in whole blood can successfully differentiate cancers from healthy people. Furthermore, the DL model is applied to explore the potential pattern hidden in data of the established technology, and the accuracy of DL cancer diagnosis can acquire 93.3%. Consequently, the developed platform offers a new avenue for lncRNA joint detection and early intelligent diagnosis of cancer.
Assuntos
Técnicas Biossensoriais , Aprendizado Profundo , RNA Longo não Codificante , RNA Longo não Codificante/genética , Humanos , Pontos Quânticos/química , Técnicas Eletroquímicas , Sistemas CRISPR-Cas/genética , Neoplasias/diagnóstico , Neoplasias/genética , Compostos de Cádmio/química , Sulfetos/química , Limite de Detecção , Processos FotoquímicosRESUMO
Convenient and accurate quantification of disease-relevant multitargets is essential for community disease screening. However, in the field of photoelectrochemical (PEC) sensors for multisubstance detection, research on the continuous detection of multiple targets using a polarity-switching mode is scarce. In this study, a multiplexed PEC bioassay was developed based on a target-triggered "anodic-cathodic-anodic" multiple-polarity-switchable mode. Employing miRNA-21 and miRNA-141 as model analytes, the photosensitive material combinations of Cu2O/gold nanoparticles (AuNPs)/TiO2 and CdS/AuNPs/TiO2 were successively formed through the specific binding of different whisker branches of Whisker-DNA to Cu2O-H1 and the CdS-tripod DNA ring, respectively. This process reverses the photocurrent polarity from anodic to cathodic and then back to anodic upon detecting different targets, resulting in the high-sensitivity quantification of various biological targets with reduced interference. To enhance the device's utility and affordability in community disease screening, integrating a capacitor and a multimeter-smartphone connection simplifies the assembly and reduces costs. In developing the PEC sensor, the device demonstrated linear detection ranges for miRNA-21 and miRNA-141 from 0.01 fM to 10 nM. Detection limits for miRNA-21 and miRNA-141 were established at 3.2 and 4.3 aM, respectively. The innovative target-triggered multiple-polarity-switchable mode offers adaptability for other multitarget detections by simply modifying the structure of the whisker branches and the combination of photosensitive materials.
Assuntos
Cobre , Técnicas Eletroquímicas , Ouro , Nanopartículas Metálicas , MicroRNAs , Titânio , MicroRNAs/análise , Ouro/química , Nanopartículas Metálicas/química , Titânio/química , Cobre/química , Humanos , Compostos de Cádmio/química , Sulfetos/química , Processos Fotoquímicos , Limite de Detecção , DNA/química , DNA/análise , Técnicas BiossensoriaisRESUMO
As artificial receptors for protein recognition, epitope-imprinted polymers combined with fluorescence sensing based on quantum dots (QDs) can be potentially used for biological analysis and disease diagnosis. However, the usual way for fabrication of QD sensors through unoriented epitope imprinting is confronted with the problems of disordered imprinting sites and low template utilization. In this context, a facile and efficient oriented epitope surface imprinting was put forward based on immobilization of the epitope templates via thiol-disulfide exchange reactions. With N-succinimidyl 3-(2-pyridyldithio)-propionate (SPDP) as a heterobifunctional reagent, cysteine-modified epitopes of cytochrome c were anchored on the surface of pyridyl disulfide functionalized silica nanoparticles sandwiching CdTe QDs. After surface imprinting via a sol-gel process, the epitope templates were removed from the surface-imprinted layers simply by reduction of the thiol-disulfide, affording oriented epitope-imprinted sites. By this method, the amount of epitope templates was only 1/20 of traditionally unoriented epitopes. The resulting sensors demonstrated significantly enhanced imprinting performance and high sensitivity, with the imprinting factor increasing from 2.6 to 3.9, and the limit of detection being 91 nM. Such epitope-oriented surface-imprinted method may offer a new design strategy for the construction of high-affinity protein recognition nanomaterials with fluorescence sensing.
Assuntos
Dissulfetos , Epitopos , Impressão Molecular , Nanopartículas , Pontos Quânticos , Dióxido de Silício , Compostos de Sulfidrila , Pontos Quânticos/química , Dióxido de Silício/química , Compostos de Sulfidrila/química , Epitopos/química , Dissulfetos/química , Nanopartículas/química , Propriedades de Superfície , Telúrio/química , Fluorescência , Espectrometria de Fluorescência , Compostos de Cádmio/químicaRESUMO
In this work, a photoelectrochemical (PEC) immunosensor was constructed for the ultrasensitive detection of lung cancer marker neuron-specific enolase (NSE) based on a microflower-like heterojunction of cadmium indium sulfide and magnesium indium sulfide (CdIn2S4/MgIn2S4, CMIS) as photoactive material. Specifically, the well-matched energy level structure and narrow energy level gradients between CdIn2S4 and MgIn2S4 could accelerate the separation of electron-hole (e--h+) pairs in the CMIS heterojunction to enhance the photocurrent of CMIS, which was increased 5.5 and 80 times compared with that of single CdIn2S4 and MgIn2S4, respectively. Meanwhile, using CMIS as photoactive material, increasing the biocompatibility by dropping Pt NPs on the surface of CMIS to immobilize the antibody through Pt-N bond. Fe3O4-Ab2, acting as the quencher, competitively consumes electron donors and absorbs light, leading to photocurrent quenching. With the increasing of quencher, the photocurrent decreased. Hence, the developed "signal-off" PEC immunosensor realized the trace detection of NSE within the range from 1.0 fg/mL to 10 ng/mL with a low detection limit of 0.34 fg/mL. This strategy provided a new perspective for establishing ternary metal sulfide heterojunction to construct PEC immunosensor for sensitive detection of disease biomarkers.
Assuntos
Biomarcadores Tumorais , Índio , Neoplasias Pulmonares , Fosfopiruvato Hidratase , Sulfetos , Humanos , Fosfopiruvato Hidratase/análise , Índio/química , Biomarcadores Tumorais/análise , Sulfetos/química , Limite de Detecção , Técnicas Eletroquímicas , Técnicas Biossensoriais/métodos , Imunoensaio/métodos , Compostos de Cádmio/química , Anticorpos Imobilizados/imunologia , Anticorpos Imobilizados/químicaRESUMO
Sulfide biomineralization is a microorganism-induced process for transforming the environmentally hazardous cadmium into useful resource utilization. This study successfully constructed cadmium sulfide nanoparticles-Rhodopseudomonas palustris (Bio-CdS NPs-R. palustris) hybrids. For the self-assembling hybrids, Bio-CdS NPs were treated as new artificial-antennas to enhance photosynthesis, especially under low light (LL). Bacterial physiological results of hybrids were significantly increased, particularly for cells under LL, with higher enhancement photon harvesting ability. The enhancement included the pigment contents, and the ratio of the peripheral light-harvesting complex â ¡ (LH2) to light-harvesting â (1.33 ± 0.01 under LL), leading to the improvements of light-harvesting, transfer, and antenna conversion efficiencies. Finally, the stimulated electron chain of hybrids improved bacterial metabolism with increased nicotinamide adenine dinucleotide (NADH, 174.5% under LL) and adenosine triphosphate (ATP, 41.1% under LL). Furthermore, the modified photosynthetic units were induced by the up-regulated expression of fixK, which was activated by reduced oxygen tension of the medium for hybrids. fixK up-regulated genes encoding pigments (crt, and bch) and complexes (puf, pucAB, and pucC), leading to improved light-harvesting and transfer, and transform ability. This study provides a comprehensive understanding of the solar energy utilization mechanism of in-situ semiconductor-phototrophic microbe hybrids, contributing to further theoretical insight into their practical application.
Assuntos
Compostos de Cádmio , Luz , Fotossíntese , Rodopseudomonas , Sulfetos , Sulfetos/química , Rodopseudomonas/metabolismo , Compostos de Cádmio/química , Biomineralização , Biodegradação Ambiental , Nanopartículas/químicaRESUMO
Excessive use of food coloring agents in the food industry to make the food more attractive or improve the taste has caused various health and ecological problems. Therefore, it is necessary to develop a reliable, sensitive, and selective sensing probe to detect food dyes in different food products for future industrial processing and biosafety. In recent decades, surface-functionalized quantum dots (QDs), owing to their unique optical properties, have gained tremendous interest for a wide range of applications, including biomedical, bioimaging and sensing applications. Herein, we have reported the synthesis of excellent colloidal stable and highly luminescent CdTe core and CdTe@ZnTe core-shell QDs using dual functionalizing agents, polyvinyl pyrrolidone and vitamin C. The synthesized QDs were explored as excellent sensing probes for the food dyes carmoisine, Ponceau 4R and tartrazine with limit of detection (LOD) values of 0.097 ± 0.006, 0.147 ± 0.001 and 0.044 ± 0.001 µM for CdTe-PVP QDs and 0.079 ± 0.001, 0.114 ± 0.002 and 0.042 ± 0.001 µM for CdTe@ZnTe-PVP QDs, respectively. The sensitivity of the synthesized QDs for the food dyes was also investigated in real samples (soft drinks and medications). Moreover, considering the potential effects of QDs as therapeutics or nano-drug carriers, the interactions between the synthesized QDs and carrier protein human serum albumin (HSA) were investigated. The binding affinity was observed to be in the order of 104 M-1. QDs were found to quench the intrinsic fluorescence of HSA, and both types of quenching (static and dynamic) occur via electrostatic interactions in association with hydrophobic forces without any significant alteration in the protein structure.
Assuntos
Compostos de Cádmio , Pontos Quânticos , Telúrio , Pontos Quânticos/química , Telúrio/química , Compostos de Cádmio/química , Humanos , Corantes de Alimentos/análise , Corantes de Alimentos/química , Ligação Proteica , Zinco/química , Ácido Ascórbico/química , Limite de Detecção , Albumina Sérica Humana/química , Albumina Sérica Humana/análise , Povidona/químicaRESUMO
In this work, we explored the potential of thiol-capped CdZnTe quantum dots (QDs) as an exceptional signal tag for fluorescence aptasensing applications. Employing a one-pot hydrothermal approach, we modulated the terminal functional groups of CdZnTe QDs using l-cysteine (Lcys), 3-mercaptopropionic acid (MPA), and N-acetyl-l-cysteine (NAC) as ligands. Our comparative analysis revealed that NAC-capped CdZnTe QDs (NAC-CdZnTe QDs) exhibited superior anti-interference capabilities and storage stability across various temperatures, pH levels, and storage durations. Encouraged by these promising results, we further optimized the use of ultrastable NAC-CdZnTe QDs encapsulated in dendritic mesoporous silica nanoparticles (DMSN@QDs) as an exceptional tag for the development of an advanced anti-interference fluorescence aptasensor for aflatoxin B1 (AFB1) detection. The developed aptasensor using DMSN@QDs as signal tags achieved a remarkable signal amplification of approximately 10.2 fold compared to the NAC-CdZnTe QDs coated silica (SiO2@QDs) labeled fluorescence aptasensor. This aptasensor was able to detect AFB1 within a wide range of 1 pg mL-1 to 200 ng mL-1, achieving a limit of detection as low as 0.41 pg mL-1 (S/N = 3). Crucially, the specific binding affinity between the aptamer and the target enabled the aptasensor to be easily customized for various targets by simply replacing the aptamer sequence with the desired one. The exceptional potential of NAC-CdZnTe QDs, particularly when encapsulated in DMSNs, leads to the development of highly sensitive and selective anti-interference fluorescence aptasensors for various targets, thereby, paving the way for advancements in a diverse range of applications.
Assuntos
Aptâmeros de Nucleotídeos , Técnicas Biossensoriais , Compostos de Cádmio , Pontos Quânticos , Dióxido de Silício , Telúrio , Pontos Quânticos/química , Dióxido de Silício/química , Telúrio/química , Compostos de Cádmio/química , Técnicas Biossensoriais/métodos , Aptâmeros de Nucleotídeos/química , Porosidade , Acetilcisteína/química , Fluorescência , Espectrometria de Fluorescência , Limite de Detecção , Cádmio , ZincoRESUMO
A dual-emission ratiometric fluorescence sensor (CDs@CdTe@MIP) with a self-calibration function was successfully constructed for AMO detection. In the CDs@CdTe@MIP system, non-imprinted polymer-coated CDs and molecule-imprinted polymer-coated CdTe quantum dots were used as the reference signal and response elements, respectively. The added AMO quenched the fluorescence of the CdTe quantum dots, whereas the fluorescence intensity of the CDs remained almost unchanged. The AMO concentration was monitored using the fluorescence intensity ratio (log(I647/I465)0/(I647/I465)) to reduce interference from the testing environment. The sensor with a low detection limit of 0.15 µg/L enabled detection of the AMO concentration within 6 min. The ratiometric fluorescence sensor was used to detect AMO in spiked pork samples; it exhibited a high recovery efficiency and relative standard deviation (RSD) of 97.94-103.70% and 3.77-4.37%, respectively. The proposed highly sensitive and selective platform opens avenues for sensitive, reliable, and rapid determination of pharmaceuticals in the environment and food safety monitoring using ratiometric sensors.
Assuntos
Amoxicilina , Compostos de Cádmio , Limite de Detecção , Impressão Molecular , Pontos Quânticos , Espectrometria de Fluorescência , Telúrio , Pontos Quânticos/química , Compostos de Cádmio/química , Telúrio/química , Espectrometria de Fluorescência/métodos , Amoxicilina/análise , Amoxicilina/química , Corantes Fluorescentes/química , Sulfetos/química , Animais , Contaminação de Alimentos/análise , Polímeros Molecularmente Impressos/química , SuínosRESUMO
BACKGROUND: The importance of multi-target simultaneous detection lies in its ability to significantly boost detection efficiency, making it invaluable for rapid and cost-effective testing. Photoelectrochemical (PEC) sensors have emerged as promising candidates for detecting harmful substances and biomarkers, attributable to their unparalleled sensitivity, minimal background signal, cost-effectiveness, equipment simplicity, and outstanding repeatability. However, designing an effective multi-target detection strategy remains a challenging task in the PEC sensing field. Consequently, there is a pressing need to address the development of PEC sensors capable of simultaneously detecting multiple targets. RESULTS: CdIn2S4/V-MoS2 heterojunctions were successfully prepared via a hydrothermal method. These heterojunctions exhibited a high photocurrent intensity, representing a 1.53-fold enhancement compared to CdIn2S4 alone. Next, we designed a multi-channel aptasensing chip using ITO as the substrate. Three working electrodes were created via laser etching and subsequently modified with CdIn2S4/V-MoS2 heterojunctions. Thiolated aptamers were then self-assembled onto the CdIn2S4/V-MoS2 heterojunctions via covalent bonds, serving as recognition tool. By empolying the CdIn2S4/V-MoS2 heterojunctions as the sensing platform and aptamers as recognition tool, we successfully developed a disposable aptasensing chip for the simultaneous PEC detection of three typical mycotoxins (aflatoxin B1 (AFB1), ochratoxin A (OTA), and zearalenone (ZEN)). This aptasensing chip exhibited wide detection range for AFB1 (0.05-50 ng/mL), OTA (0.05-500 ng/mL), and ZEN (0.1-250 ng/mL). Furthermore, it demonstrated ultra-low detection limits of 0.017 ng/mL for AFB1, 0.016 ng/mL for OTA, and 0.033 ng/mL for ZEN. SIGNIFICANCE AND NOVELTY: The aptasensing chip stands out for its cost-effectiveness, simplicity of fabrication, and multi-channel capabilities. The versatility and practicality enable it to serve as a powerful platform for designing multi-channel PEC aptasensors. With its ability to detect multiple targets with high sensitivity and specificity, the aptasensing chip holds immense potential for applications across diverse fields, such as environmental monitoring, clinical diagnostics, and food safety monitoring, where multi-target detection is crucial.
Assuntos
Aptâmeros de Nucleotídeos , Dissulfetos , Técnicas Eletroquímicas , Molibdênio , Semicondutores , Molibdênio/química , Técnicas Eletroquímicas/instrumentação , Técnicas Eletroquímicas/métodos , Aptâmeros de Nucleotídeos/química , Dissulfetos/química , Limite de Detecção , Nanoestruturas/química , Processos Fotoquímicos , Micotoxinas/análise , Técnicas Biossensoriais , Compostos de Cádmio/química , Ocratoxinas/análiseRESUMO
More recently, the application of semiconductor nanomaterials called quantum dots (QDs), has gained considerable attention as they possess tunable optoelectronic and physicochemical properties. There are several routes of QDs synthesis some of which include lithography, molecular beam epitaxy, and chemical reduction. However, most of these methods are expensive, labour intensive, and produce toxic by-products. Hence, the biosynthesis of QDs has been extensively researched for addressing the issues. This review elaborates on the biogenic synthesis of cadmium selenide, cadmium telluride, cadmium sulfide, lead sulfide, and zinc sulfide QDs using bacteria, and fungi. Further, we attempt to identify the underlying mechanism and critical parameters that can control the synthesis of QDs. Eventually, their application in detectors, photovoltaics, biodiesel, photocatalysis, infection-control, and bioimaging are discussed. Thus, biogenic QDs have a tremendous scope in future to emerge as next generation nanotheranostics although thorough pharmacokinetic, and pharmacodynamic studies are required.
Assuntos
Bactérias , Compostos de Cádmio , Fungos , Pontos Quânticos , Sulfetos , Compostos de Zinco , Pontos Quânticos/química , Bactérias/efeitos dos fármacos , Bactérias/metabolismo , Sulfetos/química , Sulfetos/metabolismo , Fungos/metabolismo , Fungos/efeitos dos fármacos , Compostos de Cádmio/química , Compostos de Zinco/química , Compostos de Selênio/química , Chumbo/química , TelúrioRESUMO
Sulfide-carbonate-mineralized functional bacterial consortium was constructed for flue gas cadmium biomineralization. A membrane biofilm reactor (MBfR) using the bacterial consortium containing sulfate reducing bacteria (SRB) and denitrifying bacteria (DNB) was investigated for flue gas cadmium (Cd) removal. Cadmium removal efficiency achieved 90%. The bacterial consortium containing Citrobacter, Desulfocurvus and Stappia were dominated for cadmium resistance-nitrate-sulfate reduction. Under flue gas cadmium stress, ten cadmium resistance genes (czcA, czcB, czcC, czcD, cadA, cadB, cadC, cueR, copZ, zntA), and seven genes related to sulfate reduction, increased in abundance; whereas others, nine genes related to denitrification, decreased, indicating that cadmium stress was advantageous to sulfate reduction in the competition with denitrification. A bacterial consortium could capable of simultaneously cadmium resistance, sulfate reduction and denitrification. Microbial induced carbonate precipitation (MICP) and biological adsorption process would gradually yield to sulfide-mineralized process. Flue gas cadmium could transform to Cd-EPS, cadmium carbonate (CdCO3) and cadmium sulfide (CdS) bioprecipitate. The functional bacterial consortium was an efficient and eco-friendly bifunctional bacterial consortium for sulfide-carbonate-mineralized of cadmium. This provides a green and low-carbon advanced treatment technology using sulfide-carbonate-mineralized functional bacterial consortium for the removal of cadmium or other hazardous heavy metal contaminants in flue gas.
Assuntos
Cádmio , Carbonatos , Desnitrificação , Sulfetos , Cádmio/metabolismo , Sulfetos/metabolismo , Carbonatos/química , Carbonatos/metabolismo , Bactérias/metabolismo , Bactérias/genética , Biodegradação Ambiental , Biofilmes , Poluentes Atmosféricos/metabolismo , Consórcios Microbianos , Sulfatos/metabolismo , Compostos de CádmioRESUMO
Quantum dots (QDs) are widely utilized semiconductor nanocrystal materials with both nanotoxicity and composition-related toxicity. To determine the toxicological impacts and underlying mechanisms of QDs with different compositions on microalgae, carbon QDs (CQDs) and CdSe QDs were used in the present study. Results showed that QDs composed of CdSe were more toxic than QDs composed of carbon, which inhibited cell growth, with reductions in chl b content, chlorophyll fluorescence parameters, and increases in lipids and starch (two major storage substances). In addition, CdSe QDs elevated reactive oxygen species (ROS), resulting in oxidative damage, while CQDs had little effect on antioxidants. Comparative transcriptome analysis showed that gene expression was accelerated by CdSe QDs, and there was a compensatory upregulation of porphyrin metabolism, potentially to support chlorophyll synthesis. In addition, an MYB transcription factor was predicted by weighted gene co-expression network analysis (WGCNA) to serve as regulator in nanoparticle toxicity, while glutathione peroxidase (GPX) and dual-specificity tyrosine phosphorylation regulated kinases 2/3/4 (DYRK2/3/4) may be key mediators of the composition-related toxicity of CdSe QDs. This study highlights the critical role of QDs' composition in determining their impacts on aquatic microalgae, providing a theoretical reference for selecting appropriate QDs materials for various industrial applications.