RESUMO
In vivo molecular imaging tools hold immense potential to drive transformative breakthroughs by enabling researchers to visualize cellular and molecular interactions in real-time and/or at high resolution. These advancements will facilitate a deeper understanding of fundamental biological processes and their dysregulation in disease states. Here, we develop and characterize a self-assembling protein nanomicelle called collagen type I binding - thermoresponsive assembled protein (Col1-TRAP) that binds tightly to type I collagen in vitro with nanomolar affinity. For ex vivo visualization, Col1-TRAP is labeled with a near-infrared fluorescent dye (NIR-Col1-TRAP). Both Col1-TRAP and NIR-Col1-TRAP display approximately a 3.8-fold greater binding to type I collagen compared to TRAP when measured by surface plasmon resonance (SPR). We present a proof-of-concept study using NIR-Col1-TRAP to detect fibrotic type I collagen deposition ex vivo in the livers of mice with non-alcoholic steatohepatitis (NASH). We show that NIR-Col1-TRAP demonstrates significantly decreased plasma recirculation time as well as increased liver accumulation in the NASH mice compared to mice without disease over 4 hours. As a result, NIR-Col1-TRAP shows potential as an imaging probe for NASH with in vivo targeting performance after injection in mice. STATEMENT OF SIGNIFICANCE: Direct molecular imaging of fibrosis in NASH patients enables the diagnosis and monitoring of disease progression with greater specificity and resolution than do elastography-based methods or blood tests. In addition, protein-based imaging probes are more advantageous than alternatives due to their biodegradability and scalable biosynthesis. With the aid of computational modeling, we have designed a self-assembled protein micelle that binds to fibrillar and monomeric collagen in vitro. After the protein was labeled with near-infrared fluorescent dye, we injected the compound into mice fed on a NASH diet. NIR-Col1-TRAP clears from the serum faster in these mice compared to control mice, and accumulates significantly more in fibrotic livers.This work advances the development of targeted protein probes for in vivo fibrosis imaging.
Assuntos
Colágeno Tipo I , Micelas , Hepatopatia Gordurosa não Alcoólica , Animais , Hepatopatia Gordurosa não Alcoólica/diagnóstico por imagem , Hepatopatia Gordurosa não Alcoólica/metabolismo , Hepatopatia Gordurosa não Alcoólica/patologia , Colágeno Tipo I/química , Camundongos , Camundongos Endogâmicos C57BL , Fígado/diagnóstico por imagem , Fígado/metabolismo , Fígado/patologia , Corantes Fluorescentes/química , MasculinoRESUMO
3D bioprinting, a significant advancement in biofabrication, is renowned for its precision in creating tissue constructs. Collagen, despite being a gold standard biomaterial, faces challenges in bioink formulations due to its unique physicochemical properties. This study introduces a novel, neutral-soluble, photocrosslinkable collagen maleate (ColME) that is ideal for 3D bioprinting. ColME was synthesized by chemically modifying bovine type I collagen with maleic anhydride, achieving a high substitution ratio that shifted the isoelectric point to enhance solubility in physiological pH environments. This modification was confirmed to preserve the collagen's triple-helix structure substantially. Bioprinting parameters for ColME were optimized, focusing on adjustments to the bioink concentration, extrusion pressure, nozzle speed, and temperature. Results demonstrated that lower temperatures and smaller nozzle sizes substantially improved the print quality of grid structures. Additionally, the application of intermittent photo-crosslinking facilitated the development of structurally robust 3D multilayered constructs, enabling the stable fabrication of complex tissues. Cell viability assays showed that encapsulated cells within the ColME matrix maintained high viability after printing. When compared to methacrylated gelatin, ColME exhibited superior mechanical strength, resistance to enzymatic digestion, and overall printability, positioning it as an outstanding bioink for the creation of durable, bioactive 3D tissues.
Assuntos
Bioimpressão , Maleatos , Impressão Tridimensional , Animais , Maleatos/química , Bovinos , Sobrevivência Celular/efeitos dos fármacos , Colágeno/química , Reagentes de Ligações Cruzadas/química , Processos Fotoquímicos , Engenharia Tecidual , Materiais Biocompatíveis/química , Materiais Biocompatíveis/síntese química , Tinta , Alicerces Teciduais/química , Humanos , Colágeno Tipo I/químicaRESUMO
A goal of regenerative engineering is the rational design of materials to restore the structure-function relationships that drive reparative programs in damaged tissues. Despite the widespread use of extracellular matrices for engineering tissues, their application has been limited by a narrow range of tunable features. The primary objective of this study is to develop a versatile platform for evaluating tissue-specific cellular interactions using Type I collagen scaffolds with highly tunable biophysical properties. The kinetics of collagen fibrillogenesis were modulated through a combination of varied shear rate and pH during neutralization, to achieve a broad range of fibril anisotropy, porosity, diameter, and storage modulus. The role that each of these properties play in guiding muscle, bone, and vascular cell types was comprehensively identified, and informed the in vitro generation of three distinct musculoskeletal engineered constructs. Myogenesis was highly regulated by smaller fibrils and larger storage moduli, endothelial inflammatory phenotype was predominantly guided by fibril anisotropy, and osteogenesis was enhanced by highly porous collagen with larger fibrils. This study introduces a novel approach for dynamically modulating Type I collagen materials and provides a robust platform for investigating cell-material interactions, offering insights for the future rational design of tissue-specific regenerative biomaterials. STATEMENT OF SIGNIFICANCE: The biophysical properties of regenerative materials facilitate key cell-substrate interactions that can guide the morphology, phenotype, and biological response of cells. In this study, we describe the fabrication of an engineered collagen hydrogel that can be modified to exhibit control over a wide range of biophysical features, including fibril organization and size, nanoscale porosity, and mechanics. We identified the unique combination of collagen features that optimally promote regenerative muscle, bone, and vascular cell types while also delineating the properties that hinder these same cellular responses. This study presents a highly accessible method to control the biophysical properties of collagen hydrogels that can be adapted for a broad range of tissue engineering and regenerative applications.
Assuntos
Nanofibras , Osteogênese , Osteogênese/efeitos dos fármacos , Humanos , Nanofibras/química , Animais , Engenharia Tecidual/métodos , Desenvolvimento Muscular , Alicerces Teciduais/química , Colágeno Tipo I/química , Células Endoteliais/citologia , Células Endoteliais/metabolismo , Colágeno/químicaRESUMO
Physiologically relevant in vitro models of the human outer retina are required to better elucidate the complex interplay of retinal tissue layers and investigate their role in retinal degenerative disorders. Materials currently used to mimic the function of Bruch's membrane fail to replicate a range of important structural, mechanical, and biochemical properties. Here, we detail the fabrication of a surface-functionalized, fibrous collagen I membrane. We demonstrate its ability to better replicate a range of important material properties akin to the function of human Bruch's membrane when compared with a commonly utilized synthetic polyethylene terephthalate alternative. We further reveal the ability of this membrane to support the culture of the ARPE-19 cell line, as well as human pluripotent stem cell-derived RPE-like cells and human umbilical vein endothelial cells. This material could provide greater physiological relevance to the native Bruch's membrane than current synthetic materials and further improve the outcomes of in vitro outer retinal models.
Assuntos
Lâmina Basilar da Corioide , Colágeno Tipo I , Retina , Humanos , Materiais Biomiméticos/química , Materiais Biomiméticos/farmacologia , Lâmina Basilar da Corioide/metabolismo , Lâmina Basilar da Corioide/química , Linhagem Celular , Colágeno Tipo I/química , Colágeno Tipo I/metabolismo , Células Endoteliais da Veia Umbilical Humana , Polietilenotereftalatos/química , Retina/citologia , Retina/metabolismo , Epitélio Pigmentado da Retina/metabolismo , Epitélio Pigmentado da Retina/citologia , Epitélio Pigmentado da Retina/efeitos dos fármacosRESUMO
The clinical treatment of bone defects includes allogeneic bone transplantation and autologous bone transplantation. However, they all have their own limitations, and the scope of application is limited. In recent years, bone tissue engineering scaffolds based on a variety of materials have been well developed and achieved good bone regeneration ability. However, most scaffold materials always face problems such as high biotoxicity, leading to inflammation and poor bioactivity, which limits the bone regeneration effect and prolongs the bone regeneration time. In our work, we prepared hydroxyapatite, erythropoietin (EPO), and osteogenic growth peptide (OGP) codoped type-I collagen (Col I) polypeptide nanofiber membranes (NFMs) by electrostatic spinning. In cell experiments, the composite NFMs had low cytotoxicity and promoted osteogenic differentiation of rat bone marrow mesenchymal stem cells. Quantitative real-time polymerase chain reaction and alkaline phosphatase staining confirmed the high expression of osteogenic genes, and alizarin red S staining directly confirmed the appearance of calcium nodules. In animal experiments, the loaded hydroxyapatite formed multiple independent mineralization centers in the defect center. Under the promotion of Col I, EPO, and OGP, the bone continued to grow along the mineralization centers as well as inward the defect edge, and the bone defect completely regenerated in about two months. The hematological and histological analyses proved the safety of the experiments. This kind of design to promote bone regeneration by simulating bone composition, introducing mineralization center and signal molecules, can shorten repair time, improve repair effect, and has good practical prospects in the future.
Assuntos
Regeneração Óssea , Colágeno Tipo I , Durapatita , Células-Tronco Mesenquimais , Nanofibras , Osteogênese , Nanofibras/química , Animais , Regeneração Óssea/efeitos dos fármacos , Colágeno Tipo I/metabolismo , Colágeno Tipo I/química , Colágeno Tipo I/farmacologia , Colágeno Tipo I/genética , Osteogênese/efeitos dos fármacos , Durapatita/química , Durapatita/farmacologia , Ratos , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/metabolismo , Diferenciação Celular/efeitos dos fármacos , Alicerces Teciduais/química , Engenharia Tecidual/métodos , Peptídeos/farmacologia , Peptídeos/química , Eritropoetina/química , Ratos Sprague-Dawley , Peptídeos e Proteínas de Sinalização Intercelular/farmacologia , Masculino , Membranas Artificiais , HistonasRESUMO
Collagen type I is well-known for its outstanding mechanical properties which it inherits from its hierarchical structure. Collagen type I fibrils may be viewed as a heterogeneous material made of protein, macromolecules (such as glycosaminoglycans and proteoglycans) and water. Water content modulates the properties of these fibrils. Yet, the properties of water and the fine interactions of water with the protein constituent of these heterofibrils have only received limited attention. Here, we propose to model collagen type I fibrils as a hydrated structure made of tropocollagen molecules assembled in a microfibril crystal. We perform large-scale all-atom molecular dynamics simulations of the hydration of collagen fibrils beyond the onset of disassembly. We found that the structural and dynamic properties of water vary strongly with the level of hydration of the microfibril. More importantly, we found that the properties vary spatially within the 67 nm D-spacing periodic structure. Alteration of the structural and dynamical properties of the collagen microfibril occur first in the gap region. Overall, we identify that the change in the role of water molecules from glue to lubricant between tropocollagen molecules arises around 100% hydration while the microfibril begins to disassemble beyond 130% water content. Our findings are supported by a decrease in hydrogen bonding, recovery of bulk water properties and amorphization of the tropocollagen molecules packing. Our simulations reveal the structure and dynamics of hydrated collagen fibrils with unprecedented spatial resolution from physiological conditions to disassembly. Beyond the process of self-assembly and the emergence of mechanical properties of collagen type I fibrils, our results may also provide new insights into mineralization of collagen fibrils.
Assuntos
Colágeno Tipo I , Microfibrilas , Simulação de Dinâmica Molecular , Água , Água/química , Microfibrilas/química , Colágeno Tipo I/química , Tropocolágeno/química , Colágeno/químicaRESUMO
Chondrogenesis is a complex cellular process that involves the transformation of mesenchymal stem cells (MSCs) into chondrocytes, the specialised cells that form cartilage. In recent years, three-dimensional (3D) culture systems have emerged as a promising approach to studying cell behaviour and development in a more physiologically relevant environment compared to traditional two-dimensional (2D) cell culture. The use of these systems provided insights into the molecular mechanisms that regulate chondrogenesis and has the potential to revolutionise the development of new therapies for cartilage repair and regeneration. This study demonstrates the successful application of Raman microspectroscopy (RMS) as a label-free, non-destructive, and sensitive method to monitor the chondrogenic differentiation of bone marrow-derived rat mesenchymal stem cells (rMSCs) in a collagen type I hydrogel, and explores the potential benefits of 3D hydrogels compared to conventional 2D cell culture environments. rMSCs were cultured on 3D substrates for 3 weeks and their differentiation was monitored by measuring the spectral signatures of their subcellular compartments. Additionally, the evolution of high-density micromass cultures was investigated to provide a comprehensive understanding of the process and complex interactions between cells and their surrounding extracellular matrix. For comparison, rMSCs were induced into chondrogenesis in identical medium conditions for 21 days in monolayer culture. Raman spectra showed that rMSCs cultured in a collagen type I hydrogel are able to undergo a distinct chondrogenic differentiation pathway at a significantly higher rate than the 2D culture cells. 3D cultures expressed stronger and more homogeneous chondrogenesis-associated peaks such as collagens, glycosaminoglycans (GAGs), and aggrecan while manifesting changes in proteins and lipidic content. These results suggest that 3D type I collagen hydrogel substrates are promising for in vitro chondrogenesis studies, and that RMS is a valuable tool for monitoring chondrogenesis in 3D environments.
Assuntos
Diferenciação Celular , Células-Tronco Mesenquimais , Análise Espectral Raman , Análise Espectral Raman/métodos , Animais , Ratos , Células-Tronco Mesenquimais/citologia , Condrogênese , Hidrogéis/química , Células Cultivadas , Técnicas de Cultura de Células/métodos , Colágeno Tipo I/metabolismo , Colágeno Tipo I/química , Técnicas de Cultura de Células em Três Dimensões/métodosRESUMO
The precise mechanisms underlying the cellular response to static electric cues remain unclear, limiting the design and development of biomaterials that utilize this parameter to enhance specific biological behaviours. To gather information on this matter we have explored the interaction of collagen type-I, the most abundant mammalian extracellular protein, with poly(vinylidene fluoride) (PVDF), an electroactive polymer with great potential for tissue engineering applications. Our results reveal significant differences in collagen affinity, conformation, and interaction strength depending on the electric charge of the PVDF surface, which subsequently affects the behaviour of mesenchymal stem cells seeded on them. These findings highlight the importance of surface charge in the establishment of the material-protein interface and ultimately in the biological response to the material. STATEMENT OF SIGNIFICANCE: The development of new tissue engineering strategies relies heavily on the understanding of how biomaterials interact with biological tissues. Although several factors drive this process and their driving principles have been identified, the relevance and mechanism by which the surface potential influences cell behaviour is still unknown. In our study, we investigate the interaction between collagen, the most abundant component of the extracellular matrix, and poly(vinylidene fluoride) with varying surface charges. Our findings reveal substantial variations in the binding forces, structure and adhesion of collagen on the different surfaces, which collectively explain the differential cellular responses. By exposing these differences, our research fills a critical knowledge gap and paves the way for innovations in material design for advanced tissue regeneration strategies.
Assuntos
Células-Tronco Mesenquimais , Polivinil , Propriedades de Superfície , Polivinil/química , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/metabolismo , Células-Tronco Mesenquimais/efeitos dos fármacos , Animais , Colágeno Tipo I/metabolismo , Colágeno Tipo I/química , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Adesão Celular/efeitos dos fármacos , Eletricidade Estática , Polímeros de FluorcarbonetoRESUMO
In cancer metastasis, collectively migrating clusters are discriminated into leader and follower cells that move through extracellular matrices (ECMs) with different characteristics. The impact of changes in ECM protein types on leader cells and migrating clusters is unknown. To address this, we investigated the response of leader cells and migrating clusters upon moving from one ECM protein to another using a photoactivatable substrate bearing photocleavable PEG (PCP), whose surface changes from protein-repellent to protein-adhesive in response to light. We chose laminin and collagen I for our study since they are abundant in two distinct regions in living tissues, namely basement membrane and connective tissue. Using the photoactivatable substrates, the precise deposition of the first ECM protein in the irradiated areas was achieved, followed by creating well-defined cellular confinements. Secondary irradiation enabled the deposition of the second ECM protein in the new irradiated regions, resulting in region-selective heterogeneous and homogenous ECM protein-coated surfaces. Different tendencies in leader cell formation from laminin into laminin compared to those migrating from laminin into collagen were observed. The formation of focal adhesion and actin structures for cells within the same cluster in the ECM proteins responded according to the underlying ECM protein type. Finally, integrin ß1 was crucial for the appearance of leader cells for clusters migrating from laminin into collagen. However, when it came to laminin into laminin, integrin ß1 was not responsible. This highlights the correlation between leader cells in collective migration and the biochemical signals that arise from underlying extracellular matrix proteins.
Assuntos
Movimento Celular , Proteínas da Matriz Extracelular , Laminina , Laminina/química , Laminina/metabolismo , Proteínas da Matriz Extracelular/metabolismo , Proteínas da Matriz Extracelular/química , Animais , Integrina beta1/metabolismo , Integrina beta1/química , Camundongos , Polietilenoglicóis/química , Humanos , Fenótipo , Matriz Extracelular/metabolismo , Colágeno Tipo I/metabolismo , Colágeno Tipo I/químicaRESUMO
Guided bone regeneration (GBR) is a widely used procedure that prevents the fast in-growth of soft tissues into bone defect. Among the different types of membranes, the use of collagen membranes is the gold standard. However, these membranes are implanted in tissue location where a severe acute inflammation will occur and can be negatively affected. The aim of this study was to develop a collagen-based membrane for GBR that incorporated alginate-hydroxyapatite microparticles. Membranes were manufactured using collagen type I and gelatin and alginate-hydroxyapatite microparticles. Membranes were assessed in terms of topography by scanning electron microscopy and confocal microscopy; stability by swelling after an overnight incubation in saline and enzymatic degradation against collagenase and mechanical properties by tensile tests. Furthermore, the biological response was assessed with SaOs-2 cells and THP-1 macrophages to determine alkaline phosphatase activity and inflammatory cytokine release. Our results showed that the incorporation of different percentages of these microparticles could induce changes in the surface topography. When the biological response was analyzed, either membranes were not cytotoxic to THP-1 macrophages or to SaOs-2 cells and they did not induce the release of pro-inflammatory cytokines. However, the different surface topographies did not induce changes in the macrophage morphology and the release of pro- and anti-inflammatory cytokines, suggesting that the effect of surface roughness on macrophage behavior could be dependent on other factors such as substrate stiffness and composition. Collagen-gelatin membranes with embedded alginate-hydroxyapatite microparticles increased ALP activity, suggesting a positive effect of them on bone regeneration, remaining unaffected the release of pro- and anti-inflammatory cytokines.
Assuntos
Alginatos , Regeneração Óssea , Durapatita , Inflamação , Osteoblastos , Regeneração Óssea/efeitos dos fármacos , Humanos , Osteoblastos/efeitos dos fármacos , Osteoblastos/citologia , Durapatita/química , Durapatita/farmacologia , Alginatos/química , Inflamação/patologia , Propriedades de Superfície , Gelatina/química , Macrófagos/metabolismo , Regeneração Tecidual Guiada/métodos , Membranas Artificiais , Tamanho da Partícula , Citocinas/metabolismo , Colágeno Tipo I/química , Colágeno Tipo I/metabolismo , Colágeno Tipo I/farmacologia , Ácido Glucurônico/química , Ácido Glucurônico/farmacologia , Ácidos Hexurônicos/química , Ácidos Hexurônicos/farmacologiaRESUMO
Hepatic fibrosis, the insidious progression of chronic liver scarring leading to life-threatening cirrhosis and hepatocellular carcinoma, necessitates the urgent development of noninvasive and precise diagnostic methodologies. Denatured collagen emerges as a critical biomarker in the pathogenesis of hepatic fibrosis. Herein, we have for the first time developed 3D-printed collagen capture chips for highly specific surface-enhanced Raman scattering (SERS) detection of denatured type I and type IV collagen in blood, facilitating the early diagnosis of hepatic fibrosis. Employing a novel blend of denatured collagen-targeting peptide-modified silver nanoparticle probes (Ag@DCTP) and polyethylene glycol diacrylate (PEGDA), we engineered a robust ink for the 3D fabrication of these collagen capture chips. The chips are further equipped with specialized SERS peptide probes, Ag@ICTP@R1 (S-I) and Ag@IVCTP@R2 (S-IV), tailored for the targeted detection of type I and IV collagen, respectively. The SERS chip platform demonstrated exceptional specificity and sensitivity in capturing and detecting denatured type I and IV collagen, achieving detection limits of 3.5 ng/mL for type I and 3.2 ng/mL for type IV collagen within a 10-400 ng/mL range. When tested on serum samples from hepatic fibrosis mouse models across a spectrum of fibrosis stages (S0-S4), the chips consistently measured denatured type I collagen and detected a progressive increase in type IV collagen concentration, which correlated with the severity of fibrosis. This novel strategy establishes a benchmark for the multiplexed detection of collagen biomarkers, enhancing our capacity to assess the stages of hepatic fibrosis.
Assuntos
Colágeno Tipo IV , Colágeno Tipo I , Cirrose Hepática , Impressão Tridimensional , Prata , Análise Espectral Raman , Cirrose Hepática/sangue , Cirrose Hepática/diagnóstico , Análise Espectral Raman/métodos , Colágeno Tipo I/sangue , Colágeno Tipo I/química , Animais , Camundongos , Colágeno Tipo IV/sangue , Colágeno Tipo IV/química , Prata/química , Nanopartículas Metálicas/química , Desnaturação Proteica , Humanos , Polietilenoglicóis/químicaRESUMO
The construction of peptides to mimic heterogeneous proteins such as type I collagen plays a pivotal role in deciphering their function and pathogenesis. However, progress in the field has been severely hampered by the lack of capability to create stable heterotrimers with desired functional sequences and without the effect of homotrimers. We have herein developed a set of triblock peptides that can assemble into collagen mimetic heterotrimers with desired amino acids and are free from the interference of homotrimers. The triblock peptides comprise a central collagen-like block and two oppositely charged N-/C-terminal blocks, which display inherent incompetency of homotrimer formation. The favorable electrostatic attraction between two paired triblock peptides with complementary terminal charged sequences promptly leads to stable heterotrimers with controlled chain composition. The independence of the collagen-like block from the two terminal blocks endows this system with the adaptability to incorporate desired amino acid sequences while maintaining the heterotrimer structure. The triblock peptides provide a versatile and robust tool to mimic the composition and function of heterotrimer collagen and may have great potential in the design of innovative peptides mimicking heterogeneous proteins.
Assuntos
Colágeno , Peptídeos , Peptídeos/química , Colágeno/química , Multimerização Proteica , Sequência de Aminoácidos , Colágeno Tipo I/química , Eletricidade EstáticaRESUMO
We studied the origin of the vibrational signatures in the sum-frequency generation (SFG) spectrum of fibrillar collagen type I in the carbon-hydrogen stretching regime. For this purpose, we developed an all-reflective, laser-scanning SFG microscope with minimum chromatic aberrations and excellent retention of the polarization state of the incident beams. We performed detailed SFG measurements of aligned collagen fibers obtained from rat tail tendon, enabling the characterization of the magnitude and polarization-orientation dependence of individual tensor elements Xijk2 of collagen's nonlinear susceptibility. Using the three-dimensional atomic positions derived from published crystallographic data of collagen type I, we simulated its Xijk2 elements for the methylene stretching vibration and compared the predicted response with the experimental results. Our analysis revealed that the carbon-hydrogen stretching range of the SFG spectrum is dominated by symmetric stretching modes of methylene bridge groups on the pyrrolidine rings of the proline and hydroxyproline residues, giving rise to a dominant peak near 2942 cm-1 and a shoulder at 2917 cm-1. Weak asymmetric stretches of the methylene bridge group of glycine are observed in the region near 2870 cm-1, whereas asymmetric CH2-stretching modes on the pyrrolidine rings are found in the 2980 to 3030 cm-1 range. These findings help predict the protein's nonlinear optical properties from its crystal structure, thus establishing a connection between the protein structure and SFG spectroscopic measurements.
Assuntos
Carbono , Colágeno Tipo I , Hidrogênio , Hidrogênio/química , Carbono/química , Colágeno Tipo I/química , Ratos , Animais , Análise Espectral/métodosRESUMO
Biomaterial properties have recently been shown to modulate extracellular vesicle (EV) secretion and cargo; however, the effects of substrate composition on EV production remain underexplored. This study investigates the impacts of surface coatings composed of collagen I (COLI), fibronectin (FN), and poly l-lysine (PLL) on EV secretion for applications in therapeutic EV production and to further understanding of how changes in the extracellular matrix microenvironment affect EVs. EV secretion from primary bone marrow-derived mesenchymal stromal cells (BMSCs), primary adipose-derived stem cells (ASCs), HEK293 cells, NIH3T3 cells, and RAW264.7 cells was characterized on the different coatings. Expression of EV biogenesis genes and cellular adhesion genes was also analyzed. COLI coatings significantly decreased EV secretion in RAW264.7 cells, with associated decreases in cell viability and changes in EV biogenesis-related and cell adhesion genes at day 4. FN coatings increased EV secretion in NIH3T3 cells, while PLL coatings increased EV secretion in ASCs. Surface coatings had significant effects on the capacity of EVs derived from RAW264.7 and NIH3T3 cells to impact in vitro macrophage proliferation. Overall, surface coatings had different cell-specific effects on EV secretion and in vitro functional capacity, thus highlighting the potential of substrate coatings to further the development of clinical EV production systems.
Assuntos
Vesículas Extracelulares , Fibronectinas , Células-Tronco Mesenquimais , Camundongos , Animais , Humanos , Vesículas Extracelulares/química , Vesículas Extracelulares/metabolismo , Células NIH 3T3 , Células RAW 264.7 , Células-Tronco Mesenquimais/metabolismo , Células-Tronco Mesenquimais/efeitos dos fármacos , Células-Tronco Mesenquimais/citologia , Fibronectinas/química , Fibronectinas/metabolismo , Propriedades de Superfície , Polilisina/química , Polilisina/farmacologia , Materiais Revestidos Biocompatíveis/química , Materiais Revestidos Biocompatíveis/farmacologia , Células HEK293 , Proliferação de Células/efeitos dos fármacos , Adesão Celular/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Colágeno Tipo I/metabolismo , Colágeno Tipo I/química , Colágeno Tipo I/genéticaRESUMO
Synthetic tubular grafts currently used in clinical context fail frequently, and the expectations that biomimetic materials could tackle these limitations are high. However, developing tubular materials presenting structural, compositional and functional properties close to those of native tissues remains an unmet challenge. Here we describe a combination of ice templating and topotactic fibrillogenesis of type I collagen, the main component of tissues' extracellular matrix, yielding highly concentrated yet porous tubular collagen materials with controlled hierarchical architecture at multiple length scales, the hallmark of native tissues' organization. By modulating the thermal conductivity of the cylindrical molds, we tune the macroscopic porosity defined by ice. Coupling the aforementioned porosity patterns with two different fibrillogenesis routes results in a new family of tubular materials whose textural features and the supramolecular arrangement of type I collagen are achieved. The resulting materials present hierarchical elastic properties and are successfully colonized by human endothelial cells and alveolar epithelial cells on the luminal side, and by human mesenchymal stem cells on the external side. The proposed straightforward protocol is likely to be adapted for larger graft sizes that address ever-growing clinical needs, such as peripheral arterial disease or tracheal and bronchial reconstructions.
Assuntos
Materiais Biomiméticos , Gelo , Engenharia Tecidual , Humanos , Materiais Biomiméticos/química , Porosidade , Células-Tronco Mesenquimais/citologia , Colágeno Tipo I/química , AnimaisRESUMO
The phosphorylated noncollagenous proteins (NCPs) play a vital role in manipulating biomineralization, while the mechanism of phosphorylation of NCPs in intrafibrillar mineralization of collagen fibril has not been completely deciphered. Poly(vinylphosphonic acid) (PVPA) and sodium trimetaphosphate (STMP) as templating analogs of NCPs induce hierarchical mineralization in cooperation with indispensable sequestration analogs such as polyacrylic acid (PAA) via polymer-induced liquid-like precursor (PILP) process. Herein, STMP-Ca and PVPA-Ca complexes are proposed to achieve rapid intrafibrillar mineralization through polyelectrolyte-Ca complexes pre-precursor (PCCP) process. This strategy is further verified effectively for remineralization of demineralized dentin matrix both in vitro and in vivo. Although STMP micromolecule fails to stabilize amorphous calcium phosphate (ACP) precursor, STMP-Ca complexes facilely permeate into intrafibrillar interstices and trigger phase transition of ACP to hydroxyapatite within collagen. In contrast, PVPA-stabilized ACP precursors lack liquid-like characteristic and crystallize outside collagen due to rigid conformation of PVPA macromolecule, while PVPA-Ca complexes infiltrate into partial intrafibrillar intervals under electrostatic attraction and osmotic pressure as evidenced by intuitionistic 3D stochastic optical reconstruction microscopy (3D-STORM). The study not only extends the variety and size range of polyelectrolyte for PCCP process but also sheds light on the role of phosphorylation for NCPs in biomineralization.
Assuntos
Fosfatos de Cálcio , Colágeno Tipo I , Polivinil , Fosfatos de Cálcio/química , Polivinil/química , Colágeno Tipo I/química , Colágeno Tipo I/metabolismo , Polifosfatos/química , Animais , Resinas Acrílicas/química , Dentina/química , Dentina/metabolismo , Fosforilação , Humanos , Compostos de Vinila , OrganofosfonatosRESUMO
Lumpfish (Cyclopterus lumpus) is an underutilized marine resource that is currently only being exploited for roe. Lumpfish skin was pre-treated with alkali (0.1M NaOH) and acid (0.1M HCl) at a skin to chemical ratio of 1:10 for 24 h at 5 °C to remove non-collagenous proteins and minerals. The pre-treated skin was washed, and gelatine was extracted with 0.1M of acetic acid at three different ratios (1:5, 1:10, and 1:15), time (12,18, and 24 h), and temperature combinations (12, 28, and 24 °C). The highest total extraction yield (>40%) was obtained with combinations of extraction ratios of 1:15 and 1:10 with a longer time (24 h) and higher temperature (18-24 °C). The highest gelatine content was obtained with an extraction period of 24 h and ratio of 1:10 (>80%). SDS-PAGE analysis confirmed the presence of type-I collagen. A rheological evaluation indicated melting and gelling temperatures, gel strength, and viscosity properties comparable to existing cold-water gelatine sources.
Assuntos
Gelatina , Pele , Animais , Gelatina/química , Pele/química , Pele/metabolismo , Hidrólise , Peixes , Temperatura , Perciformes , Colágeno Tipo I/química , Viscosidade , Proteínas de Peixes/isolamento & purificação , Proteínas de Peixes/químicaRESUMO
A breast-cancer tumor develops within a stroma, a tissue where a complex extracellular matrix surrounds cells, mediating the cancer progression through biomechanical and -chemical cues. Current materials partially mimic the stromal matrix in 3D cell cultures but methods for measuring the mechanical properties of the matrix at cell-relevant-length scales and stromal-stiffness levels are lacking. Here, to address this gap, we developed a characterization approach that employs probe-based microrheometry and Bayesian modeling to quantify length-scale-dependent mechanics and mechanical heterogeneity as in the stromal matrix. We examined the interpenetrating network (IPN) composed of alginate scaffolds (for adjusting mechanics) and type-1 collagen (a stromal-matrix constituent). We analyzed viscoelasticity: absolute-shear moduli (stiffness/elasticity) and phase angles (viscous and elastic characteristics). We determined the relationship between microrheometry and rheometry information. Microrheometry reveals lower stiffness at cell-relevant scales, compared to macroscale rheometry, with dependency on the length scale (10 to 100 µm). These data show increasing IPN stiffness with crosslinking until saturation (≃15 mM of Ca2+). Furthermore, we report that IPN stiffness can be adjusted by modulating collagen concentration and interconnectivity (by polymerization temperature). The IPNs are heterogeneous structurally (in SEM) and mechanically. Interestingly, increased alginate crosslinking changes IPN heterogeneity in stiffness but not in phase angle, until the saturation. In contrast, such changes are undetectable in alginate scaffolds. Our nonlinear viscoelasticity analysis at tumor-cell-exerted strains shows that only the softer IPNs stiffen with strain, like the stromal-collagen constituent. In summary, our approach can quantify the stromal-matrix-related viscoelasticity and is likely applicable to other materials in 3D culture.
Assuntos
Alginatos , Matriz Extracelular , Matriz Extracelular/química , Matriz Extracelular/metabolismo , Humanos , Alginatos/química , Técnicas de Cultura de Células em Três Dimensões , Viscosidade , Células Estromais/citologia , Células Estromais/metabolismo , Elasticidade , Alicerces Teciduais/química , Colágeno Tipo I/química , Colágeno Tipo I/metabolismo , Fenômenos Biomecânicos , Reologia , Modelos Biológicos , Teorema de BayesRESUMO
Collagen type I is a material widely used for 3D cell culture and tissue engineering. Different architectures, such as gels, sponges, membranes, and nanofibers, can be fabricated with it. In collagen hydrogels, the formation of fibrils and fibers depends on various parameters, such as the source of collagen, pH, temperature, concentration, age, etc. In this work, we study the fibrillogenesis process in collagen type I hydrogels with different types of microbeads embedded, using optical techniques such as turbidity assay and confocal reflectance microscopy. We observe that microbeads embedded in the collagen matrix hydrogels modify the fibrillogenesis. Our results show that carboxylated fluorescent microbeads accelerate 3.6 times the gelation, while silica microbeads slow down the formation of collagen fibrils by a factor of 1.9, both compared to pure collagen hydrogels. Our observations suggest that carboxylate microbeads act as nucleation sites and the early collagen fibrils bind to the microbeads.
Assuntos
Colágeno Tipo I , Hidrogéis , Microesferas , Hidrogéis/química , Colágeno Tipo I/química , Animais , Colágeno/química , Engenharia Tecidual/métodos , Concentração de Íons de Hidrogênio , Materiais Biocompatíveis/química , Dióxido de Silício/química , Microscopia Confocal , Temperatura , Ácidos Carboxílicos/química , Teste de MateriaisRESUMO
The hierarchical assembly of nanoapatite within a type I collagen matrix was achieved through biomimetic mineralization in vitro, cooperatively regulated by non-collagenous proteins and small biomolecules. Here, we demonstrated that IP6 could significantly promote intrafibrillar mineralization in two- and three-dimensional collagen models through binding to collagen fibrils via hydrogen bonds (the interaction energy â¼10.21 kJ mol-1), as confirmed by the FTIR spectra and isothermal experimental results. In addition, we find that IP6 associated with dental collagen fibrils can also enhance the remineralization of calcium-depleted dentin and restore its mechanical properties similar to the natural dentin within 4 days. The promoting effect is mainly due to the chemical modification of IP6, which alters the interfacial physicochemical properties of collagen fibrils, strengthening the interaction of calcium phosphate minerals and mineral ions with collagen fibrils. This strategy of interfacial regulation to accelerate the mineralization of collagen fibrils is essential for dental repair and the development of a clinical product for the remineralization of hard tissue.