RESUMO
Clobetasol propionate (CLO) is a potent glucocorticoid used to treat inflammation-based skin, scalp, and hair disorders. In such conditions, hair follicles (HF) are not only the target site but can also act as drug reservoirs when certain formulations are topically applied. Recently, we have demonstrated nanostructured lipid carriers (NLC) containing CLO presenting epidermal-targeting potential. Here, the focus was evaluating the HF uptake provided by such nanoparticles in comparison to a commercial cream and investigating the influence of different physical stimuli [i.e., infrared (IR) irradiation (with and without metallic nanoparticles-MNP), ultrasound (US) (with and without vibration) and mechanical massage] on their follicular targeting potential. Nanosystems presented sizes around 180 nm (PdI < 0.2) and negative zeta potential. The formulation did not alter skin water loss measurements and was stable for at least 30 days at 5 °C. Nanoparticles released the drug in a sustained fashion for more than 3 days and increased passively about 40 times CLO follicular uptake compared to the commercial cream. Confocal images confirmed the enhanced follicular delivery. On the one hand, NLC application followed by IR for heat generation showed no benefit in terms of HF targeting even at higher temperatures generated by metallic nanoparticle heating. On the other hand, upon US treatment, CLO retention was significantly increased in deeper skin layers. The addition of mechanical vibration to the US treatment led to higher follicular accumulation compared to passive exposure to NLC without stimuli. However, from all evaluated stimuli, manual massage presented the highest follicular targeting potential, driving more than double the amount of CLO into the HF than NLC passive application. In conclusion, NLC showed great potential for delivering CLO to HF, and a simple massage was capable of doubling follicular retention.
Assuntos
Clobetasol/administração & dosagem , Portadores de Fármacos/química , Folículo Piloso/metabolismo , Lipídeos/química , Nanopartículas/administração & dosagem , Absorção Cutânea , Pele/metabolismo , Clobetasol/química , Folículo Piloso/efeitos dos fármacos , Humanos , Raios Infravermelhos , Nanopartículas/química , Pele/efeitos dos fármacos , Estresse Mecânico , UltrassomRESUMO
OBJECTIVES: The aim of this study was to investigate in vitro the epidermal targeting potential of clobetasol propionate-loaded nanostructured lipid carriers (CP-NLC) when compared to that of chitosan-coated (CP-NLC-C). METHODS: CP-NLC were prepared by microemulsion method and characterized by dynamic light scattering, transmission electron microscopy, in vitro release and permeation studies. To verify epidermal targeting, permeation studies were performed in two sets of experiments. For the first set, the skin was removed from the diffusion cell and stratum corneum (SC) was separated from the remaining skin (RS). For the second set, the whole epidermis (EP) was separated from the dermis (DER). CP quantification was performed in each skin layer. KEY FINDINGS: A novel clobetasol propionate-loaded NLC was produced with 1/5th of the drug dose used in commercial formulations and, even so, presented greater skin permeation. Both chitosan-coated and uncoated NLC enhanced the amount of CP in the epidermis more than 80-fold when compared to the commercial formulation (20.26 ± 2.77; 17.85 ± 0.49 and 0.22 ± 0.02 µg/cm(2) , respectively). Differently from chitosan-coated NLC, the uncoated NLC did not show dermal retention. CONCLUSIONS: NLC proved to be a system with potential for targeting drug delivery to the epidermal layer.
Assuntos
Clobetasol/administração & dosagem , Portadores de Fármacos , Epiderme/metabolismo , Glucocorticoides/administração & dosagem , Lipídeos/química , Nanopartículas , Absorção Cutânea , Administração Cutânea , Animais , Quitosana/química , Clobetasol/química , Clobetasol/metabolismo , Composição de Medicamentos , Glucocorticoides/química , Glucocorticoides/metabolismo , Técnicas In Vitro , Cinética , Nanotecnologia , Permeabilidade , Solubilidade , Suínos , Tecnologia Farmacêutica/métodosRESUMO
The in vitro assessment of drug release from polymeric nanocapsules suspensions is one of the most studied parameters in the development of drug-loaded nanoparticles. Nevertheless, official methods for the evaluation of drug release from submicrometric carriers are not available. In this work, a new approach to assess the in vitro drug release profile from drug-loaded lipid-core nanocapsules (LNC) was proposed. A continuous-flow system (open system) was designed to evaluate the in vitro drug release profiles from different LNC formulations containing prednisolone or clobetasol propionate (LNC-CP) as drug model (LNC-PD) using a homemade apparatus. The release medium was constantly renewed throughout the experiment. A dialysis bag containing 5 mL of formulation (0.5 mg mL(-1)) was maintained inside the apparatus, under magnetic stirring and controlled temperature (37°C). In parallel, studies based on the conventional dialysis sac technique (closed system) were performed. It was possible to discriminate the in vitro drug release profile of different formulations using the open system. The proposed strategy improved the sink condition, by constantly renewing the release medium, thus maintaining the drug concentration farther from the saturated concentration in the release medium. Moreover, problems due to sampling errors can be easily overcome using this semi-automated system, since the collection is done automatically without interference from the analyst. The system proposed in this paper brings important methodological and analytical advantages, becoming a promising prototype semi-automated apparatus for performing in vitro drug release studies from drug-loaded lipid-core nanocapsules and other related nanoparticle drug delivery systems.
Assuntos
Lipídeos/química , Nanocápsulas/química , Diálise Renal/métodos , Química Farmacêutica/métodos , Clobetasol/química , Portadores de Fármacos/química , Sistemas de Liberação de Medicamentos/métodos , Liberação Controlada de Fármacos , Polímeros/química , Diálise Renal/instrumentaçãoRESUMO
We developed a dermatological nanomedicine containing clobetasol propionate-loaded nanocapsules and evaluated its efficacy in a model of contact dermatitis after topical administration in rats. Hydrogels containing clobetasol propionate-loaded lipid-core nanocapsules or nanoemulsion (HG-CP-NC and HG-CP-NE, respectively) were prepared to evaluate the influence of the polymeric wall. They presented adequate pH values (5.50-6.50) and drug content (0.5 mg g(-1)) and their rheograms exhibited a non-Newtonian pseudoplastic behavior. The best in vitro drug release control was obtained for HG-CP-NC (1.03±0.11 µg cm(-2) h) compared to the HG-CP-NE (1.65±0.19 µg cm(-2) h) and the hydrogels containing nonencapsulated drug (HG-CP) (2.79±0.22 µg cm(-2) h). A significant increase in NTPDase activity was observed in lymphocytes for the group treated with 0.05% HG-CP-NC every other day compared to the group treated with 0.05% HG-CP every day using the in vivo model of contact dermatitis. The nanoencapsulation of clobetasol in nanocapsules led to a better control of the drug release from the semisolid nanomedicine and provided better in vivo dermatological efficacy.
Assuntos
Clobetasol/administração & dosagem , Clobetasol/química , Dermatite de Contato/tratamento farmacológico , Nanocápsulas/administração & dosagem , Nanocápsulas/química , Administração Tópica , Animais , Anti-Inflamatórios/administração & dosagem , Anti-Inflamatórios/química , Feminino , Hidrogéis/administração & dosagem , Hidrogéis/química , Concentração de Íons de Hidrogênio , Linfócitos/efeitos dos fármacos , Nanomedicina/métodos , Tamanho da Partícula , Ratos , Ratos WistarRESUMO
The influence of the polymeric amorphous materials on the physicochemical and drug release properties of drug-loaded nanocapsules as well as their role on the protection of the entrapped drug against the degradation induced by UV radiation was evaluated. Nanocapsules were prepared by interfacial deposition of preformed polymer (PLA, PLGA 50:50, and PLGA 85:15) using clobetasol propionate as the drug model. In vitro drug release was evaluated by the dialysis bag method. Photochemical stability was studied under UVA radiation. After preparation, all formulations presented nanometric mean size (180-200 nm), polydispersity index below 0.20, acid pH, negative zeta potential, and encapsulation efficiency close to 100%. Clobetasol propionate-loaded PLGA nanocapsules presented a lower physicochemical stability, showing a high drug leakage during 3 months of storage. In vitro studies showed biphasic drug release from all nanocapsules (according to an anomalous transport) and no influence of the hydrophilic characteristics of the amorphous polymeric material on the release rate. The photostability of clobetasol propionate under UVA radiation was improved by its incorporation into PLA and PLGA nanocapsules showing that besides semicrystalline polymers, amorphous polymers could also efficiently protect nanoencapsulated drugs against UV radiation.
Assuntos
Clobetasol/química , Cristalização/métodos , Portadores de Fármacos/química , Nanocápsulas/química , Nanocápsulas/ultraestrutura , Nanomedicina/métodos , Poliésteres/química , Absorção , Clobetasol/administração & dosagem , Difusão , Portadores de Fármacos/efeitos da radiação , Estabilidade de Medicamentos , Luz , Substâncias Macromoleculares/química , Teste de Materiais , Conformação Molecular , Tamanho da Partícula , Transição de Fase , Propriedades de SuperfícieRESUMO
The aim of this study was to prepare and to evaluate the physicochemical and in vitro drug release characteristics of different nanostructured systems containing clobetasol propionate (CP): CP-loaded polymeric nanoparticles (nanocapsules and nanospheres) and CP-loaded nanoemulsion. Physicochemical characteristics of the formulations were monitored up to 9 months after preparation by means of drug content, encapsulation efficiency, mean size, polydispersity index, pH, and zeta potential. In vitro drug release studies were carried out using the dialysis bag method. Photostability of CP-loaded nanoparticles was evaluated by their exposition to UVA radiation. All formulations presented nanometric mean size (140-220 nm), polydispersity index below 0.25, neutral pH values, negative zeta potential and encapsulation efficiency close to 100%. All these parameters, except pH, remained unchangeable up to 9 months of storage at room temperature for CP-loaded nanocapsules. On the other hand, CP-loaded nanospheres and nanoemulsion showed an increase in their mean size, as well as in polydispersity index under storage (after 3 and 6 months, respectively). In vitro drug release studies showed a controlled release of CP from nanoparticles (nanocapsules > nanospheres > nanoemulsion) with a low burst release. Photostability of CP under UVA radiation was improved by its incorporation into nanoparticles (nanocapsules > nanoemulsions > nanospheres).