RESUMO
A comparative study between two advanced oxidation technologies for pollutant degradation has been made. With the use of dichloroacetic acid (DCA) as the model pollutant, the reactions with hydrogen peroxide and UV radiation (H2O2/UV, 253.7 nm) and photocatalysis with titanium dioxide (TiO2/UV, 300-400 nm) are analyzed. Three criteria have been selected to compare the performances of both processes: (i) the percentage conversion of DCA and TOC (total organic carbon) at a fixed reaction time; (ii) the quantum efficiency, employing the true radiation absorption rates for both activated species (H2O2 and TiO2); (iii) the specific energy consumption to degrade 50% of the initial TOC. The optimal molar concentration ratio of H2O2/DCA and the optimal catalyst concentration have been employed in the experiments. The results indicate that, under the optimal operating conditions, the H2O2/UV process exhibits, by a large difference, the best performance taking into account the above-mentioned criteria. Nevertheless, both systems show similar values of specific energy consumption when a thinner reactor is employed. These results cannot be safely extrapolated to other contexts if (i) other compounds of different structure are degraded and (ii) a different catalyst is used. Moreover, they were obtained under optimized conditions, and typical, real-life situations may render quite different results due to the robustness of the titanium dioxide operation. They should serve as an indication that, under the studied conditions, a much-improved catalyst performance must be achieved to parallel, with a heterogeneous process, a yield similar to the one obtained with the homogeneous system.
Assuntos
Ácido Dicloroacético/química , Peróxido de Hidrogênio/química , Raios Ultravioleta , Processos Fotoquímicos , Poluentes Químicos da Água/químicaRESUMO
The intrinsic reaction kinetics of the decomposition of dichloroacetic acid (DCA) using UV/H2O2 was studied. A complete mathematical model, including the effect of the absorbed radiation intensities and H2O2 concentration was developed. The results of the kinetic measurements were analysed using a complete mathematical model of the experimental device that was used for the laboratory operation (a differential reactor inside a recycle). In this way it was expected to obtain intrinsic kinetic parameters. Experimental data agree well with theoretical predictions esmploying just two kinetic parameters derived from the proposed reaction mechanism.
Assuntos
Ácido Dicloroacético/química , Peróxido de Hidrogênio/química , Modelos Químicos , Raios Ultravioleta , Cinética , Oxirredução/efeitos da radiaçãoRESUMO
The degradation reaction of dichloroacetic acid employing H(2)O(2) and UVC radiation (253.7nm) has been studied in a well mixed reactor operating inside a recycling system. It has been shown that in an aqueous solution no stable reaction intermediates are formed and, at every time during the reaction, two mols of hydrochloric acid are formed for every mol of dichloroacetic acid that is decomposed and, in the same way, there is a paired agreement between the calculated TOC concentration corresponding to the unaltered dichloroacetic acid and the experimental values measured in the solution. On this basis and classical references from the scientific literature for the H(2)O(2) photolysis, a complete reaction scheme, apt for reaction kinetics mathematical modeling and ulterior scale-up is proposed.
Assuntos
Ácido Dicloroacético/química , Ácido Dicloroacético/efeitos da radiação , Peróxido de Hidrogênio/química , Raios Ultravioleta , Carbono/análise , Cloretos/análise , Concentração de Íons de Hidrogênio , Poluentes Químicos da Água/química , Poluentes Químicos da Água/efeitos da radiação , Purificação da ÁguaRESUMO
The effect of combining the photocatalytic processes using TiO2 and the photo-Fenton reaction with Fe3+ or ferrioxalate as a source of Fe2+ was investigated in the degradation of 4-chlorophenol (4CP) and dichloroacetic acid (DCA) using solar irradiation. Multivariate analysis was used to evaluate the role of three variables: iron, H2O2 and TiO2 concentrations. The results show that TiO2 plays a minor role when compared to iron and H2O2 in the solar degradation of 4CP and DCA in the studied conditions. However, its presence can improve TOC removal when H2O2 is totally consumed. Iron and peroxide play major roles, especially when Fe(NO3)3 is used in the degradation of 4CP. No significant synergistic effect was observed by the addition of TiO2 in this process. On the other hand, synergistic effects were observed between FeOx and TiO2 and between H2O2 and TiO2 in the degradation of DCA.
Assuntos
Clorofenóis/isolamento & purificação , Corantes/química , Ácido Dicloroacético/isolamento & purificação , Irrigantes do Canal Radicular/isolamento & purificação , Titânio/química , Poluentes da Água/isolamento & purificação , Purificação da Água/métodos , Clorofenóis/química , Ácido Dicloroacético/química , Peróxido de Hidrogênio/química , Ferro/química , Análise Multivariada , Fotoquímica , Irrigantes do Canal Radicular/química , Luz SolarRESUMO
The photo-Fenton process using potassium ferrioxalate as a mediator was investigated for the photodegradation of dichloracetic acid (DCA) and 2,4-dichlorophenol (DCP) in aqueous medium using solar light as source of irradiation. The influence of the solution depth, the light intensity and the effect of stirring the solution during irradiation process were evaluated using DCA as a model compound. A negligible influence of stirring the solution was observed when the concentration of ferrioxalate (FeOx) was 0.8 mM and solution depth was 4.5 or 14 cm. The optimum FeOx concentration determined for solution depths between 4.5 and 14 cm was 0.8 mM considering total organic carbon (TOC) removal during DCA irradiation. The high efficiency of the photo-Fenton process was demonstrated on summer days, when only 10 min of exposition (around noon) were sufficient to completely destroy the organic carbon of a 1.0 mM DCA solution in the presence of 0.8 mM FeOx and 6.0 mM H2O2 using a solution depth of 4.5 cm. It was observed that the photodegradation efficiency increases linearly with the solar light intensity up to values around 15 Wm(-2) but this linear relationship does not hold above this value showing a square root dependence. The photodegradation of a solution of DCP/FeOx showed a lower TOC removal rate than that observed for DCA/FeOx, achieving approximately 90% after 35 min irradiation under 19 W m(-2), while under this light intensity, the same TOC removal of DCA/FeOx was achieved in only 10 min irradiation.