RESUMO

Monolayer transition metal dichalcogenides (TMDs) have emerged as promising materials to generate single-photon emitters (SPEs). While there are several previous reports in the literature about TMD-based SPEs, the precise nature of the excitonic states involved in them is still under debate. Here, we use magneto-optical techniques under in-plane and out-of-plane magnetic fields to investigate the nature of SPEs in WSe2 monolayers on glass substrates under different strain profiles. Our results reveal important changes on the exciton localization and, consequently, on the optical properties of SPEs. Remarkably, we observe an anomalous PL energy redshift with no significant changes of photoluminescence (PL) intensity under an in-plane magnetic field. We present a model to explain this redshift based on intervalley defect excitons under a parallel magnetic field. Overall, our results offer important insights into the nature of SPEs in TMDs, which are valuable for future applications in quantum technologies.

RESUMO

We report experimental investigations of spin-to-charge current conversion and charge transfer (CT) dynamics at the interface of the graphene/WS2 van der Waals heterostructure. Pure spin current was produced by the spin precession in the microwave-driven ferromagnetic resonance of a permalloy film (Py=Ni81Fe19) and injected into the graphene/WS2 heterostructure through a spin pumping process. The observed spin-to-charge current conversion in the heterostructure is attributed to the inverse Rashba-Edelstein effect (IREE) at the graphene/WS2 interface. Interfacial CT dynamics in this heterostructure was investigated based on the framework of the core-hole clock (CHC) approach. The results obtained from spin pumping and CHC studies show that the spin-to-charge current conversion and charge transfer processes are more efficient in the graphene/WS2 heterostructure compared to isolated WS2 and graphene films. The results show that the presence of WS2 flakes improves the current conversion efficiency. These experimental results are corroborated by density functional theory (DFT) calculations, which reveal (i) Rashba spin-orbit splitting of graphene orbitals and (ii) electronic coupling between graphene and WS2 orbitals. This study provides valuable insights for optimizing the design and performance of spintronic devices.

Assuntos

RESUMO

A multi-orbital ionic Hamiltonian is presented to analyze the many-body properties of the d-transition metal atoms. This Hamiltonian considers all the atomic states obeying the first Hund's rule and also includes all orbital degeneracy, as well as the interaction of the atom with a metal. We analyze the solution of this ionic Hamiltonian by means of the equation of Motion method up to the fourth order,V4, in the atom-metal interaction. Equations for the appropriate Green-functions for analyzing the chemical and transport properties of the system are given for different atom occupancies. In particular, we introduce a full analysis of the multi-orbital Hamiltonian including atomic configurations withN, N+ 1 andN- 1 electrons, and discuss its Kondo properties. The shellsd1,d2andd3are analyzed in detail and Kondo energies are deduced in all these cases showing good agreement with the conventional known results.

RESUMO

Catalytic biomass pyrolysis is one of the most promising routes for obtaining bio-sustainable products that replace petroleum derivatives. This study evaluates the production of aromatic compounds (benzene, toluene, and xylene (BTX)) from the catalytic pyrolysis of lignocellulosic biomass (Pinus radiata (PR) and Eucalyptus globulus (EG)). Chilean natural zeolite (NZ) was used as a catalyst for pyrolysis reactions, which was modified by double ion exchange (H2NZ) and transition metals impregnation (Cu5H2NZ and Ni5H2NZ). The catalysts were characterized by nitrogen adsorption, X-ray diffraction (XRD), ammonium programmed desorption (TPD-NH3), and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS). Analytical pyrolysis coupled with gas chromatography/mass spectrometry (Py-GC/MS) allowed us to study the influence of natural and modified zeolite catalysts on BTX production. XRD analysis confirmed the presence of metal oxides (CuO and NiO) in the zeolite framework, and SEM-EDS confirmed successful metal impregnation (6.20% for Cu5H2NZ and 6.97% for Ni5H2NZ). Py-GC/MS revealed a reduction in oxygenated compounds such as esters, ketones, and phenols, along with an increase in aromatic compounds in PR from 2.92% w/w (without catalyst) to 20.89% w/w with Ni5H2NZ at a biomass/catalyst ratio of 1/5, and in EG from 2.69% w/w (without catalyst) to 30.53% w/w with Ni5H2NZ at a biomass/catalyst ratio of 1/2.5. These increases can be attributed to acidic sites within the catalyst pores or on their surface, facilitating deoxygenation reactions such as dehydration, decarboxylation, decarbonylation, aldol condensation, and aromatization. Overall, this study demonstrated that the catalytic biomass pyrolysis process using Chilean natural zeolite modified with double ion exchange and impregnated with transition metals (Cu and Ni) could be highly advantageous for achieving significant conversion of oxygenated compounds into hydrocarbons and, consequently, improving the quality of the condensed pyrolysis vapors.

RESUMO

The goal of the sensor industry is to develop innovative, energy-efficient, and reliable devices to detect molecules relevant to economically important sectors such as clinical diagnoses, environmental monitoring, food safety, and wearables. The current demand for portable, fast, sensitive, and high-throughput platforms to detect a plethora of new analytes is continuously increasing. The 2D transition metal dichalcogenides (2D-TMDs) are excellent candidates to fully meet the stringent demands in the sensor industry; 2D-TMDs properties, such as atomic thickness, large surface area, and tailored electrical conductivity, match those descriptions of active sensor materials. However, the detection capability of 2D-TMDs is limited by their intrinsic tendency to aggregate and settle, which reduces the surface area available for detection, in addition to the weak interactions that pristine 2D-TMDs normally exhibit with analytes. Chemical functionalization has been proposed as a consensus solution to these limitations. Tailored surface modification of 2D-TMDs, either by covalent functionalization, non-covalent functionalization, or a mixture of both, allows for improved specificity of the surface-analyte interaction while reducing van der Waals forces between 2D-TMDs avoiding agglomeration and precipitation. From this perspective, we review the recent advances in improving the detection of biomolecules, heavy metals, and gases using chemically functionalized 2D-TMDs. Covalent and non-covalent functionalized 2D-TMDs are commonly used for the detection of biomolecules and metals, while 2D-TMDs functionalized with metal nanoparticles are used for gas and Raman sensors. Finally, we describe the limitations and further strategies that might pave the way for miniaturized, flexible, smart, and low-cost sensing devices.

RESUMO

van der Waals heterostructures composed of two-dimensional (2D) transition metal dichalcogenides and vdW magnetic materials offer an intriguing platform to functionalize valley and excitonic properties in nonmagnetic TMDs. Here, we report magneto photoluminescence (PL) investigations of monolayer (ML) MoSe2 on the layered A-type antiferromagnetic (AFM) semiconductor CrSBr under different magnetic field orientations. Our results reveal a clear influence of the CrSBr magnetic order on the optical properties of MoSe2, such as an anomalous linear-polarization dependence, changes of the exciton/trion energies, a magnetic-field dependence of the PL intensities, and a valley g-factor with signatures of an asymmetric magnetic proximity interaction. Furthermore, first-principles calculations suggest that MoSe2/CrSBr forms a broken-gap (type-III) band alignment, facilitating charge transfer processes. The work establishes that antiferromagnetic-nonmagnetic interfaces can be used to control the valley and excitonic properties of TMDs, relevant for the development of opto-spintronics devices.

RESUMO

Herein we report the synthesis of transition-metal-free potassium borophosphate glasses and their application as bactericidal and bacteriostatic material. The antimicrobial activity was achieved through a simple change in the molar ratio of boron and phosphorus atoms, making borophosphate glass soluble in water. The glasses were analyzed by X-ray powder diffraction, Raman spectroscopy, laser-induced breakdown spectroscopy, and water absorption. The addition of a boron compound is required to obtain potassium-based phosphate glasses. Moreover, the change in the phosphorus and boron molar ratio (P/B), 2, 1 or 0.5 affects the glass solubilization in water, which increases with the phosphorus content. The glass materials were submitted to tests of biological activity against the bacteria Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. These water-soluble borophosphate glasses were employed in the development of hydrogel formulations using Carbopol®. Phosphorous-rich samples at a concentration of 15 % (w/w) in hydrogel showed better antimicrobial activity against S. aureus and E. coli, when compared to other samples, including commercial alcohol hand sanitizer gel, with an average size of the inhibition halo of 24.02±1.43 and 19.24±1.63mm, respectively.

Assuntos

RESUMO

The nonlinear optical (NLO) response of photonic materials plays an important role in the understanding of light-matter interaction as well as pointing out a diversity of photonic and optoelectronic applications. Among the recently studied materials, 2D-LTMDs (bi-dimensional layered transition metal dichalcogenides) have appeared as a beyond-graphene nanomaterial with semiconducting and metallic optical properties. In this article, we review most of our work in studies of the NLO response of a series of 2D-LTMDs nanomaterials in suspension, using six different NLO techniques, namely hyper Rayleigh scattering, Z-scan, photoacoustic Z-scan, optical Kerr gate, and spatial self-phase modulation, besides the Fourier transform nonlinear optics technique, to infer the nonlinear optical response of semiconducting MoS2, MoSe2, MoTe2, WS2, semimetallic WTe2, ZrTe2, and metallic NbS2 and NbSe2. The nonlinear optical response from a thermal to non-thermal origin was studied, and the nonlinear refraction index and nonlinear absorption coefficient, where present, were measured. Theoretical support was given to explain the origin of the nonlinear responses, which is very dependent on the spectro-temporal regime of the optical source employed in the studies.

RESUMO

The structural identification of small nickel clusters with ethanol can help to understand fundamental steps for heterogenous catalysis. We investigate the rows [Nix (EtOH)1 ]+ with x=1-4, and [Ni2 (EtOH)y ]+ with y=1-3 via IR photodissociation spectroscopy in a molecular beam experiment. Analyzing the CH- and OH-stretching frequencies and comparing these experimental results with density functional theory (DFT) calculations on the PW91/6-311+G(d,p) level leads to the identification of intact motifs for all clusters and hints for C-O cleavage of the ethanol in two particular cases. Furthermore, we analyze the effects of frequency shifts with the increasing clusters sizes using the results of natural bond orbitals (NBO) analyses and an energy decomposition method.

RESUMO

There is scarce information on the vibrational and thermal properties of small Ni clusters. Here, the outcomes of ab initio spin-polarized density functional theory calculations on the size and geometry effects upon the vibrational and thermal properties of Nin (n = 13 and 55) clusters, are discussed. For theses clusters a comparison is presented between the closed shell symmetric octahedral (Oh) and the icosahedral (Ih) geometries. The results indicate that the Ih isomers are lower in energy. Besides, ab initio molecular dynamics runs at T = 300K show that Ni13 and Ni55 clusters transform from their initial Oh geometries towards the corresponding Ih ones. For Ni13, we also consider the lowest energy less symmetric layered 1-3-6-3 structure, and the cuboid, recently observed experimentally for Pt13, which is competitive in energy but is unstable, as phonon analysis reveals. We calculate their vibrational density of states (νDOS) and heat capacity, and compare with the Ni FCC bulk counterpart. The characteristic features of the νDOS curves of these clusters are interpreted in terms of the clusters' sizes, the interatomic distance contractions, the bond order values as well as the internal pressure and strains of the clusters. We find that the softest possible frequency of the clusters is size and structure-dependent, being the smallest for the Oh ones. We identify mostly shear, tangential type displacements involving mainly surface atoms for the lowest frequency of the spectra of both Ih and Oh isomers. For the maximum frequencies of these clusters the central atom shows anti-phase movements against groups of nearest neighbor atoms. An excess of heat capacity at low temperatures with respect to the bulk is found, while at high temperatures a constant limiting value, close but lower to the Dulong and Petit value, is determined.

Assuntos

RESUMO

In this work, a ZnO hemisphere-like structure co-doped with Er and Cr was obtained by the co-precipitation method for photocatalytic applications. The dopant's effect on the ZnO lattice was investigated using X-ray diffraction, Raman, photoluminescence, UV-Vis and scanning electron microscopy/energy dispersive spectroscopy techniques. The photocatalytic response of the material was analyzed using methylene blue (MB) as the model pollutant under UV irradiation. The wurtzite structure of the Zn0.94Er0.02Cr0.04O compound presented distortions in the lattice due to the difference between the ionic radii of the Cr3+, Er3+ and Zn2+ cations. Oxygen vacancy defects were predominant, and the energy competition of the dopants interfered in the band gap energy of the material. In the photocatalytic test, the MB degradation rate was 42.3%. However, using optimized H2O2 concentration, the dye removal capacity reached 90.1%. Inhibitor tests showed that •OH radicals were the main species involved in MB degradation that occurred without the formation of toxic intermediates, as demonstrated in the ecotoxicity assays in Artemia salina. In short, the co-doping with Er and Cr proved to be an efficient strategy to obtain new materials for environmental remediation.

RESUMO

The large and rapidly growing family of 2D early transition metal carbides, nitrides, and carbonitrides (MXenes) raises significant interest in the materials science and chemistry of materials communities. Discovered a little more than a decade ago, MXenes have already demonstrated outstanding potential in various applications ranging from energy storage to biology and medicine. The past two years have witnessed increased experimental and theoretical efforts toward studying MXenes' mechanical and tribological properties when used as lubricant additives, reinforcement phases in composites, or solid lubricant coatings. Although research on the understanding of the friction and wear performance of MXenes under dry and lubricated conditions is still in its early stages, it has experienced rapid growth due to the excellent mechanical properties and chemical reactivities offered by MXenes that make them adaptable to being combined with other materials, thus boosting their tribological performance. In this perspective, the most promising results in the area of MXene tribology are summarized, future important problems to be pursued further are outlined, and methodological recommendations that could be useful for experts as well as newcomers to MXenes research, in particular, to the emerging area of MXene tribology, are provided.

RESUMO

Memristors are expected to be one of the key building blocks for the development of new bio-inspired nanoelectronics. Memristive effects in transition metal oxides are usually linked to the electromigration at the nanoscale of charged oxygen vacancies (OV). In this paper we address, for Pt/TiOx/TaOy/Pt devices, the exchange of OV between the device and the environment upon the application of electrical stress. From a combination of experiments and theoretical simulations we determine that both TiOxand TaOylayers oxidize, via environmental oxygen uptake, during the electroforming process. Once the memristive effect is stabilized (post-forming behavior) our results suggest that oxygen exchange with the environment is suppressed and the OV dynamics that drives the memristive behavior is restricted to an internal electromigration between TiOxand TaOylayers. Our work provides relevant information for the design of reliable binary oxide memristive devices.

RESUMO

One of the most widely used antibiotics is amoxicillin (AMX), which is the most widely used in humans and animals, but it is discharged metabolically due to its indigestibility. Conventional biological and physicochemical methods for removing AMX from water are not enough to mineralize it; it is only concentrated and transferred to produce new residues that require further processing to remove the new residues. In this research, naked and modified surfaces with TiO2 nanotubes (TiO2,nt) electrophoretically modified with PbO2, IrO2, RuO2, and Ta2O5 were used to evaluate their efficiency in the electrochemical degradation of AMX in acid media (0.1 mol L-1 H2SO4). After their comparison, Pb-Ta 50:50|TiO2,nt|Ti showed the highest removal efficiency of AMX (44.71%) with the lowest specific energy consumption (8.69 ± 0.78 kWh Kg COD-1) and the average instant current efficiency of 26.67 ± 9.19%, in comparison with the others naked and modified surfaces of TiO2,nt∣Ti.

Assuntos

RESUMO

Researchers in cancer nanomedicine are exploring a revolutionary multifaceted carrier for treatment and diagnosis, resulting in the proposal of various drug cargos or "magic bullets" in this past decade. Even though different nano-based complexes are registered for clinical trials, very few products enter the final stages each year because of various issues. This prevents the formulations from entering the market and being accessible to patients. In the search for novel materials, the exploitation of 2D nanosheets, including but not limited to the highly acclaimed graphene, has created extensive interest for biomedical applications. A unique set of properties often characterize 2D materials, including semiconductivity, high surface area, and their chemical nature, which allow simple decoration and functionalization procedures, structures with high stability and targeting properties, vectors for controlled and sustained release of drugs, and materials for thermal-based therapies. This review discusses the challenges and opportunities of recently discovered 2D nanosheets for cancer therapeutics, with special attention paid to the most promising design technologies and their potential for clinical translation in the future.

RESUMO

Vacancies in materials structure─lowering its atomic density─take the system closer to the atomic limit, to which all systems are topologically trivial. Here we show a mechanism of mediated interaction between vacancies inducing a topologically nontrivial phase. Within an ab initio approach we explore topological transition dependence with the vacancy density in transition metal dichalcogenides. As a case of study, we focus on the PtSe2, for which the pristine form is a trivial semiconductor with an energy gap of 1.2 eV. The vacancies states lead to a large topological gap of 180 meV within the pristine system gap. We derive an effective model describing this topological phase in other transition metal dichalcogenide systems. The mechanism driving the topological phase allows the construction of backscattering protected metallic channels embedded in a semiconducting host.

RESUMO

The Stark effect is one of the most efficient mechanisms to manipulate many-body states in nanostructured systems. In mono- and few-layer transition metal dichalcogenides, it has been successfully induced by optical and electric field means. Here, we tune the optical emission energies and dissociate excitonic states in MoSe2 monolayers employing the 220 MHz in-plane piezoelectric field carried by surface acoustic waves. We transfer the monolayers to high dielectric constant piezoelectric substrates, where the neutral exciton binding energy is reduced, allowing us to efficiently quench (above 90%) and red-shift the excitonic optical emissions. A model for the acoustically induced Stark effect yields neutral exciton and trion in-plane polarizabilities of 530 and 630 × 10-5 meV/(kV/cm)2, respectively, which are considerably larger than those reported for monolayers encapsulated in hexagonal boron nitride. Large in-plane polarizabilities are an attractive ingredient to manipulate and modulate multiexciton interactions in two-dimensional semiconductor nanostructures for optoelectronic applications.

RESUMO

Synthetic organic chemistry has witnessed a plethora of functionalization and defunctionalization strategies. In this regard, C-H functionalization has been at the forefront due to the multifarious applications in the development of simple to complex molecular architectures and holds a brilliant prospect in drug development and discovery. Despite been explored tremendously by chemists, this functionalization strategy still enjoys the employment of novel metal catalysts as well metal-free organic ligands. Moreover, the switch to photo- and electrochemistry has widened our understanding of the alternative pathways via which a reaction can proceed and these strategies have garnered prominence when applied to C-H activation. Synthetic chemists have been foraging for new directing groups and templates for the selective activation of C-H bonds from a myriad of carbon-hydrogen bonds in aromatic as well as aliphatic systems. As a matter of fact, by varying the templates and directing groups, scientists found the answer to the challenge of distal C-H bond activation which remained an obstacle for a very long time. These templates have been frequently harnessed for selectively activating C-H bonds of natural products, drugs, and macromolecules decorated with multiple C-H bonds. This itself was a challenge before the commencement of this field as functionalization of a site other than the targeted site could modify and hamper the biological activity of the pharmacophore. Total synthesis and pharmacophore development often faces the difficulty of superfluous reaction steps towards selective functionalization. This obstacle has been solved by late-stage functionalization simply by harnessing C-H bond activation. Moreover, green chemistry and metal-free reaction conditions have seen light in the past few decades due to the rising concern about environmental issues. Therefore, metal-free catalysts or the usage of non-toxic metals have been recently showcased in a number of elegant works. Also, research groups across the world are developing rational strategies for directing group free or non-directed protocols that are just guided by ligands. This review encapsulates the research works pertinent to C-H bond activation and discusses the science devoted to it at the fundamental level. This review gives the readers a broad understanding of how these strategies work, the execution of various metal catalysts, and directing groups. This not only helps a budding scientist towards the commencement of his/her research but also helps a matured mind searching out for selective functionalization. A detailed picture of this field and its progress with time has been portrayed in lucid scientific language with a motive to inculcate and educate scientific minds about this beautiful strategy with an overview of the most relevant and significant works of this era. The unique trait of this review is the detailed description and classification of various directing groups and their utility over a wide substrate scope. This allows an experimental chemist to understand the applicability of this domain and employ it over any targeted substrate.

Assuntos

RESUMO

Gold(III) complexes have been studied for the past years due to their anticancer properties and great affinity to biotargets, such as enzymes and proteins, which support their pharmacological applications. Within this scope, in this work the antiproliferative activities of two Au(III)-thiosemicarbazonate complexes, [AuClL1] (1, L1: (E,Z)-N-ethyl-N'-(3-nitroso-kN)butan-2-ylidene)carbamohydrazonothioato-k2N2,S) and [Au(Hdamp)L2]Cl (2, L2: N-(N'',N''-diethylaminothiocarbonyl)-N'(N''', N'''-dimethylcarbothioamide)benzamidineto-kN,k2S and Hdamp: 2-(N,N-dimethylaminomethyl)-phenyl-C1), and their affinities to possible biological targets were investigated. Three different tumor cell lines were used to perform the cytotoxicity assays, including one cisplatin-resistant model, and the results showed lower EC50 for 1 over 2 in every case: B16F10 (4.1 µM and 15.6 µM), A431 (4.0 µM and >50 µM) and OVCAR3 (4.2 µM and 24.5 µM). However, a lower toxicity to fibroblast 3T3 cell line was observed for 2 (30.58 µM) when compared to 1 (7.17 µM), resulting in comparable therapeutic indexes. Both complexes presented strong affinity to HSA: they distorted the secondary structure of the protein, as verified by circular dichroism, but 1 additionally presented the apparent fluorescence quenching constant (Kapp) ten times greater than 2, which was probably due to the fact of 1 being able to denature HSA. The ethidium bromide displacement assay showed that neither 1 nor 2 are strong DNA intercalators, which is in agreement with what was observed through the UV-vis titration. In both cases, the 260 nm band presented hyperchromism, which can indicate ionic interactions or DNA damage. In fact, 1 was able to damage the pGEM plasmid, similarly to cisplatin, as verified by agarose gel electrophoresis and Atomic Force Microscopy. Biophysical studies in cancer cells model membranes were also performed in order to investigate the interaction of the gold complexes to lipid bilayers and revealed that the compounds interact with the membranes by exhibiting partition coefficients of 103 order of magnitude. Overall, both complexes were found to be promising candidates for the development of a future anticancer drug against low sensitive or cisplatin resistant tumors.

Assuntos