RESUMO

This study aimed to develop and implement a nanotechnology-based alternative to traditional tracers used in the oil and gas industry for assessing interwell connectivity. A simple and rapid hydrothermal protocol for synthesizing carbon quantum dots (CQDs) using agroindustry waste was implemented. Three commercial CQDs were employed (CQDblue, CQDgreen, and CQDred); the fourth was synthesized from orange peel (CQDop). The CQDs from waste and other commercials with spherical morphology, nanometric sizes less than 11 nm in diameter, and surface roughness less than 3.1 nm were used. These tracers demonstrated high colloidal stability with a negative zeta potential, containing carbonyl-type chemical groups and unsaturations in aromatic structures that influenced their optical behavior. All materials presented high colloidal stability with negative values of charge z potential between -17.8 and -49.1. Additionally, individual quantification of these tracers is feasible even in scenarios where multiple CQDs are present in the effluent with a maximum percentage of interference of 15.5% for CQDop in the presence of the other three nanotracers. The CQDs were injected into the field once the technology was insured under laboratory conditions. Monitoring the effluents allowed the determination of connectivity for five first-line producer wells. This study enables the application of CQDs in the industry, particularly in fields where the arrangement of injector and producer wells is intricate, requiring the use of multiple tracers for a comprehensive description of the system.

RESUMO

Seniors face many challenges as they age, such as dementia, cognitive and memory disorders, vision and hearing impairment, among others. Although most of them would like to stay in their own homes, as they feel comfortable and safe, in some cases, older people are taken to special institutions, such as nursing homes. In order to provide serious and quality care to elderly people at home, continuous remote monitoring is perceived as a solution to keep them connected to healthcare service providers. The new trend in medical health services, in general, is to move from 'hospital-centric' services to 'home-centric' services with the aim of reducing the costs of medical treatments and improving the recovery experience of patients, among other benefits for both patients and medical centers. Smart energy data captured from electrical home appliance sensors open a new opportunity for remote healthcare monitoring, linking the patient's health-state/health-condition with routine behaviors and activities over time. It is known that deviation from the normal routine can indicate abnormal conditions such as sleep disturbance, confusion, or memory problems. This work proposes the development and deployment of a smart energy data with activity recognition (SEDAR) system that uses machine learning (ML) techniques to identify appliance usage and behavior patterns oriented to older people living alone. The proposed system opens the door to a range of applications that go beyond healthcare, such as energy management strategies, load balancing techniques, and appliance-specific optimizations. This solution impacts on the massive adoption of telehealth in third-world economies where access to smart meters is still limited.

Assuntos

RESUMO

Vulvovaginal candidiasis is a public health problem with a high incidence among female patients. Currently, there is an increase in the identification of Candida spp. resistant to current therapy, making it necessary to search for new therapeutic alternatives. The synergistic potential of curcumin with fluconazole is described in the literature. However, due to its high lipophilicity, it is necessary to use drug-delivery systems to adequately explore its potential, among which is the nanostructured lipid carrier. However, to date, there is no validated method of high-performance liquid chromatography for simultaneous determination of fluconazole and curcumin in the literature. Thus, the present work developed a high-performance liquid chromatography method for simultaneous determination of fluconazole and curcumin co-encapsulated in nanostructured lipid carrier which was validated according to the International Conference on Harmonization (Technical Requirements for Registration of Pharmaceuticals for Human Use) - Q2 (R1) and the Food and Drug Administration - Guidance for Bioanalytical Method. The method was applied to determine the encapsulation efficiency and drug-loading of curcumin and fluconazole in nanostructured lipid carriers. The developed method proved to be selective, precise, accurate, and robust for the simultaneous determination of both drugs, enabling the quantification of encapsulation efficiency and drug-loading of curcumin and fluconazole in nanostructured lipid carriers.

Assuntos

RESUMO

An electrochemical sensor based on electrochemically reduced graphene oxide (ErGO), carboxylated carbon nanotubes (cMWCNT), and gold nanoparticles (AuNPs) (GCE/ErGO-cMWCNT/AuNPs) was developed for the simultaneous detection of dihidroxybenzen isomers (DHB) hydroquinone (HQ), catechol (CC), and resorcinol (RS) using differential pulse voltammetry (DPV). The fabrication and optimization of the system were evaluated with Raman Spectroscopy, SEM, cyclic voltammetry, and DPV. Under optimized conditions, the GCE/ErGO-cMWCNT/AuNPs sensor exhibited a linear concentration range of 1.2-170 µM for HQ and CC, and 2.4-400 µM for RS with a detection limit of 0.39 µM, 0.54 µM, and 0.61 µM, respectively. When evaluated in tap water and skin-lightening cream, DHB multianalyte detection showed an average recovery rate of 107.11% and 102.56%, respectively. The performance was attributed to the synergistic effects of the 3D network formed by the strong π-π stacking interaction between ErGO and cMWCNT, combined with the active catalytic sites of AuNPs. Additionally, the cMWCNT provided improved electrocatalytic properties associated with the carboxyl groups that facilitate the adsorption of the DHB and the greater amount of active edge planes. The proposed GCE/ErGO-cMWCNT/AuNPs sensor showed a great potential for the simultaneous, precise, and easy-to-handle detection of DHB in complex samples with high sensitivity.

Assuntos

RESUMO

A new disposable microfluidic electrochemical paper-based device (ePAD) consisting of two spot sensors in the same working electrode for the simultaneous determination of uric acid and creatinine was developed. The spot 1 surface was modified with graphene quantum dots for direct uric acid oxidation and spot 2 surface modified with graphene quantum dots, creatininase and a ruthenium electrochemical mediator for creatinine oxidation. The ePAD was employed to construct an electrochemical sensor (based on square wave voltammetry analysis) for the simultaneous determination of uric acid and creatinine in the 0.010-3.0 µmol L-1 range. The device showed excellent analytical performance with a very low simultaneous detection limit of 8.4 nmol L-1 to uric acid and 3.7 nmol L-1 to creatinine and high selectivity. The ePAD was applied to the rapid and successful determination of those clinical biomarkers in human urine samples.

Assuntos

RESUMO

A simple and highly selective electrochemical method using a glassy carbon electrode (GCE) modified with graphene oxide (GO) and nickel oxide nanoparticles (NiONPs) was developed for the simultaneous determination of paracetamol (PAR) and ciprofloxacin (CIP). The electrochemical characterisation of the modified GCE was performed by cyclic voltammetry and electrochemical impedance spectroscopy. The morphological characterisation of the GO and NiONPs was performed by scanning electron microscopy and transmission electron microscopy. Under optimised conditions, using square wave voltammetry, the simultaneous determination of PAR and CIP using the NiONPs-GO-CTS: EPH/GCE sensor shows a linear concentration range from 0.10 to 2.9µmolL-1 and 0.040-0.97µmolL-1, with detection limits of 6.7 and 6.0 nmol L-1, respectively. The NiONPs-GO-CTS: EPH/GCE sensor showed good reproducibility, repeatability and stability. Furthermore, the proposed method was successfully applied for the simultaneous determination of PAR and CIP in synthetic biological fluid samples.

Assuntos

RESUMO

The water-soluble 3-n-propyl-4-picolinium silsesquioxane chloride (Si4Pic(+)Cl(-)) polymer was prepared, characterized and used as a stabilizing agent for the synthesis of gold nanoparticles (nAu). The ability of Si4Pic(+)Cl(-) to adsorb anionic metal complexes such as AuCl4(-) ions allowed well-dispersed nAu to be obtained with an average particle size of 4.5nm. The liquid suspension of nAu-Si4Pic(+)Cl(-) was deposited by the drop coating method onto a glassy carbon electrode (GCE) surface to build a sensor (nAu-Si4Pic(+)Cl(-)/GCE) which was used for the detection of o-nitrophenol (o-NP) and p-nitrophenol (p-NP). Under optimized experimental conditions the reduction peak current increased with increasing concentrations of both nitrophenol isomers in the range of 0.1-1.5µmolL(-1). The detection limits were 46nmolL(-1) and 55nmolL(-1) for o-NP and p-NP, respectively. These findings indicate that the nAu-Si4Pic(+)Cl(-) material is a very promising candidate to assemble electrochemical sensors for practical applications in the field of analytical chemistry.

Assuntos