RESUMO
Background: Radius curvus is a clinical manifestation of the premature closure of the distal ulnar physis and the mostcommon physeal disease in dogs, representing 63% of all physeal injuries. There are few reports indicating the techniqueof stapling for treatment of radius curvus in squeletically immature dogs. The aim of this study is to report a case of radiuscurvus in a young dog successfully treated with a combination of 3 surgical tecniques: 1- Stapling the medial and cranialportions of the distal radial physis; 2- Oblique osteotomy of the proximal ulna and ostectomy of the distal ulna, and 3-Dynamic external skeletal fixation in the elbow joint.Case: A 5-month-old female dog was referred to the University Veterinary Hospital with a history of left thoracic limb deformity for 2 months. There was a history of possible traumatic event on the front limb, in addition to providing nutritionalsupplements daily. In the radiographic evaluation the changes were identified in the left thoracic limb: shortening of theulna, procurvatum and medial angulation of the distal radius, increased joint space and articular incongruity of the elbowjoint. The dog was subjected to surgical treatment by the combination of three main surgical techniques. For the staplingof the distal radial physis the surgical approach on the cranial-medial surface of the distal radius was made. Two surgicalstaples were positioned in the distal radial physis. Thereafter a caudal approach was made to the distal region of the ulnardiaphysis for the distal ostectomy of the ulna. A bone segment of 1 cm in length of the distal ulnar diaphysis was removed.Another caudal approach was made to the proximal region of the ulnar diaphysis and a proximal oblique osteotomy of theulna was performed. For the dynamic external skeletal fixation in the elbow joint two Steinmann pins were inserted. Thefirst pin was proximal to the supracondilar...(AU)
Assuntos
Animais , Feminino , Cães , Cães/anormalidades , Rádio (Anatomia)/anormalidades , Osteotomia/veterinária , Ulna , Grampeamento Cirúrgico/veterinária , Fixadores Externos/veterinária , Ortopedia/veterináriaRESUMO
Background: Radius curvus is a clinical manifestation of the premature closure of the distal ulnar physis and the mostcommon physeal disease in dogs, representing 63% of all physeal injuries. There are few reports indicating the techniqueof stapling for treatment of radius curvus in squeletically immature dogs. The aim of this study is to report a case of radiuscurvus in a young dog successfully treated with a combination of 3 surgical tecniques: 1- Stapling the medial and cranialportions of the distal radial physis; 2- Oblique osteotomy of the proximal ulna and ostectomy of the distal ulna, and 3-Dynamic external skeletal fixation in the elbow joint.Case: A 5-month-old female dog was referred to the University Veterinary Hospital with a history of left thoracic limb deformity for 2 months. There was a history of possible traumatic event on the front limb, in addition to providing nutritionalsupplements daily. In the radiographic evaluation the changes were identified in the left thoracic limb: shortening of theulna, procurvatum and medial angulation of the distal radius, increased joint space and articular incongruity of the elbowjoint. The dog was subjected to surgical treatment by the combination of three main surgical techniques. For the staplingof the distal radial physis the surgical approach on the cranial-medial surface of the distal radius was made. Two surgicalstaples were positioned in the distal radial physis. Thereafter a caudal approach was made to the distal region of the ulnardiaphysis for the distal ostectomy of the ulna. A bone segment of 1 cm in length of the distal ulnar diaphysis was removed.Another caudal approach was made to the proximal region of the ulnar diaphysis and a proximal oblique osteotomy of theulna was performed. For the dynamic external skeletal fixation in the elbow joint two Steinmann pins were inserted. Thefirst pin was proximal to the supracondilar...
Assuntos
Feminino , Animais , Cães , Cães/anormalidades , Osteotomia/veterinária , Rádio (Anatomia)/anormalidades , Fixadores Externos/veterinária , Grampeamento Cirúrgico/veterinária , Ortopedia/veterinária , UlnaRESUMO
An 8 month-old, 10 kg male Azawakh dog was presented due to worsening forelimb gait and exercise intolerance. The right forelimb presented gross angular limb deformity with carpal valgus and radial procurvatum. Surgical planning based on radiographs allowed calculation of the centers of rotation and angularity (CORAs). The computer tomography data were used to generate 3D reconstructions of the antebrachium to aid the detection of the orthopaedic problems. With proper imaging software, the nature of the deformity and its degree were quantified using a previously unreported method based on the CORAs as a 3D printed model of anatomical area of interest. This 3D printed model was used by the surgeon to simulate the surgery with all orthopaedic steps, which included a partial ulna osteotomy and a double cuneiform osteotomy of the radius performed at the level of CORAs and stabilized with bone plates and screws. After 7 weeks, radiographs revealed bone union. At 8 months after surgery the animal presented a complete recovery of the involved forelimb. CORAs method combined with computed tomography and 3D model was useful to plan and simulate surgical procedures, including the corrective surgery of forelimb deformities in a dog which improved the surgical efficiency comparatively to the conventional pre-operative study.(AU)
Um cão com 8 meses de idade, 10kg de peso vivo, macho da raça Azawakh foi apresentado à clínica devido à intolerância ao exercício e agravamento da marcha do membro anterior. O membro anterior direito apresentou uma deformidade angular com valgus carpal e com um procarvatum radial. O planeamento cirúrgico inicialmente baseado em exames radiográficos possibilitou o cálculo dos centros de rotação e angulação articulares (CORAs). O exame de tomografia computadorizada foi utilizado juntamente com um software de imagiologia para obter o modelo 3D virtual da área anatómica de interesse que foi posteriormente impresso em 3D e que permitiu quantificar micrometricamente a deformação óssea presente. Este modelo 3D foi utilizado pelos cirurgiões para executar uma simulação cirúrgica completa que englobou todos os procedimentos cirúrgicos, que incluiu a realização de várias osteotomias e aplicação do material cirúrgico (placas e parafusos). Com base na simulação cirúrgica foi executada a cirurgia ao animal. Decorridas sete semanas, as radiografias demonstraram uma correta regeneração óssea. Oito meses após a cirurgia o animal apresentou uma recuperação completa. O método dos CORAs juntamente com a tomografia computadorizada e com a utilização do modelo 3D revelou-se útil no planeamento e na simulação dos vários procedimentos cirúrgicos, resultando numa melhoria significativa da eficiência cirúrgica.(AU)
Assuntos
Animais , Cães , Cães/anormalidades , Impressão Tridimensional/estatística & dados numéricos , Rádio (Anatomia)/cirurgiaRESUMO
An 8 month-old, 10 kg male Azawakh dog was presented due to worsening forelimb gait and exercise intolerance. The right forelimb presented gross angular limb deformity with carpal valgus and radial procurvatum. Surgical planning based on radiographs allowed calculation of the centers of rotation and angularity (CORAs). The computer tomography data were used to generate 3D reconstructions of the antebrachium to aid the detection of the orthopaedic problems. With proper imaging software, the nature of the deformity and its degree were quantified using a previously unreported method based on the CORAs as a 3D printed model of anatomical area of interest. This 3D printed model was used by the surgeon to simulate the surgery with all orthopaedic steps, which included a partial ulna osteotomy and a double cuneiform osteotomy of the radius performed at the level of CORAs and stabilized with bone plates and screws. After 7 weeks, radiographs revealed bone union. At 8 months after surgery the animal presented a complete recovery of the involved forelimb. CORAs method combined with computed tomography and 3D model was useful to plan and simulate surgical procedures, including the corrective surgery of forelimb deformities in a dog which improved the surgical efficiency comparatively to the conventional pre-operative study.(AU)
Um cão com 8 meses de idade, 10kg de peso vivo, macho da raça Azawakh foi apresentado à clínica devido à intolerância ao exercício e agravamento da marcha do membro anterior. O membro anterior direito apresentou uma deformidade angular com valgus carpal e com um procarvatum radial. O planeamento cirúrgico inicialmente baseado em exames radiográficos possibilitou o cálculo dos centros de rotação e angulação articulares (CORAs). O exame de tomografia computadorizada foi utilizado juntamente com um software de imagiologia para obter o modelo 3D virtual da área anatómica de interesse que foi posteriormente impresso em 3D e que permitiu quantificar micrometricamente a deformação óssea presente. Este modelo 3D foi utilizado pelos cirurgiões para executar uma simulação cirúrgica completa que englobou todos os procedimentos cirúrgicos, que incluiu a realização de várias osteotomias e aplicação do material cirúrgico (placas e parafusos). Com base na simulação cirúrgica foi executada a cirurgia ao animal. Decorridas sete semanas, as radiografias demonstraram uma correta regeneração óssea. Oito meses após a cirurgia o animal apresentou uma recuperação completa. O método dos CORAs juntamente com a tomografia computadorizada e com a utilização do modelo 3D revelou-se útil no planeamento e na simulação dos vários procedimentos cirúrgicos, resultando numa melhoria significativa da eficiência cirúrgica.(AU)
Assuntos
Animais , Cães , Cães/anormalidades , Impressão Tridimensional , Rádio (Anatomia)/cirurgiaRESUMO
ABSTRACT: An 8 month-old, 10 kg male Azawakh dog was presented due to worsening forelimb gait and exercise intolerance. The right forelimb presented gross angular limb deformity with carpal valgus and radial procurvatum. Surgical planning based on radiographs allowed calculation of the centers of rotation and angularity (CORAs). The computer tomography data were used to generate 3D reconstructions of the antebrachium to aid the detection of the orthopaedic problems. With proper imaging software, the nature of the deformity and its degree were quantified using a previously unreported method based on the CORAs as a 3D printed model of anatomical area of interest. This 3D printed model was used by the surgeon to simulate the surgery with all orthopaedic steps, which included a partial ulna osteotomy and a double cuneiform osteotomy of the radius performed at the level of CORAs and stabilized with bone plates and screws. After 7 weeks, radiographs revealed bone union. At 8 months after surgery the animal presented a complete recovery of the involved forelimb. CORAs method combined with computed tomography and 3D model was useful to plan and simulate surgical procedures, including the corrective surgery of forelimb deformities in a dog which improved the surgical efficiency comparatively to the conventional pre-operative study.
RESUMO: Um cão com 8 meses de idade, 10kg de peso vivo, macho da raça Azawakh foi apresentado à clínica devido à intolerância ao exercício e agravamento da marcha do membro anterior. O membro anterior direito apresentou uma deformidade angular com valgus carpal e com um procarvatum radial. O planeamento cirúrgico inicialmente baseado em exames radiográficos possibilitou o cálculo dos centros de rotação e angulação articulares (CORAs). O exame de tomografia computadorizada foi utilizado juntamente com um software de imagiologia para obter o modelo 3D virtual da área anatómica de interesse que foi posteriormente impresso em 3D e que permitiu quantificar micrometricamente a deformação óssea presente. Este modelo 3D foi utilizado pelos cirurgiões para executar uma simulação cirúrgica completa que englobou todos os procedimentos cirúrgicos, que incluiu a realização de várias osteotomias e aplicação do material cirúrgico (placas e parafusos). Com base na simulação cirúrgica foi executada a cirurgia ao animal. Decorridas sete semanas, as radiografias demonstraram uma correta regeneração óssea. Oito meses após a cirurgia o animal apresentou uma recuperação completa. O método dos CORAs juntamente com a tomografia computadorizada e com a utilização do modelo 3D revelou-se útil no planeamento e na simulação dos vários procedimentos cirúrgicos, resultando numa melhoria significativa da eficiência cirúrgica.