RESUMO

Demand charges are widely used for commercial and industrial consumers. These costs are often not well known, let alone the effects that PV can have on them. This work proposes a methodology to assess the effect of PV on reducing these charges and to optimise the power to be contracted, using techniques taken from exploratory data analysis. This methodology is applied to five case studies of industrial consumers from different sectors in Spain, finding savings between 5 % and 11 % of demand charges in industries with continuous operation and up to 28 % in cases of discontinuous operation. These savings can be even greater if the maximum power that can be contracted is lower than the optimum. The demand charges in Spain consist of a fixed part proportional to the contracted power and a variable part depending on the power peaks exceeding it. Since for the variable part the coincident and non-coincident models coexist, a comparison is made between the two models, finding that in the general case PV users can achieve higher savings with the coincident model.

RESUMO

High-performance nanosized optoelectronic devices based on van der Waals (vdW) heterostructures have significant potential for use in a variety of applications. However, the investigation of nanoribbon-based vdW heterostructures are still mostly unexplored. In this study, based on first-principles calculations, we demonstrate that a Sb2S3/Sb2Se3 vdW heterostructure, which is formed by isostructural nanoribbons of stibnite (Sb2S3) and antimonselite (Sb2Se3), possesses a direct band gap with a typical type-II band alignment, which is suitable for optoelectronics and solar energy conversion. Optical absorption spectra show broad profiles in the visible and UV ranges for all of the studied configurations, indicating their suitability for photodevices. Additionally, in 1D nanoribbons, we see sharp peaks corresponding to strongly bound excitons in a fashion similar to that of other quasi-1D systems. The Sb2S3/Sb2Se3 heterostructure is predicted to exhibit a remarkable power conversion efficiency (PCE) of 28.2%, positioning it competitively alongside other extensively studied two-dimensional (2D) heterostructures.

RESUMO

Because of the increasing demand for photovoltaic energy and the generation of end-of-life photovoltaic waste forecast, the feasibility to produce glass substrates for photovoltaic application by recycling photovoltaic glass waste (PVWG) material was analyzed. PVWG was recovered from photovoltaic house roof panels for developing windows glass substrates; PVWG was used as the main material mixed with other industrial waste materials (wSG). The glass was casted by air quenching, annealed, and polished to obtain transparent substrates samples. Fluorine-doped tin oxide (FTO) was deposited as back contact on the glass substrates by spray pyrolysis. The chemical composition of the glass materials was evaluated by X-ray fluorescence (XRF), the thermal stability was measured by differential thermal analysis (DTA) and the transmittance was determined by UV-VIS spectroscopy. The surface of the glass substrates and the deposited FTO were observed by scanning electron microscopy (SEM), the amorphous or crystalline state of the specimens were determined by X-ray diffraction (XRD) and the sheet resistance was evaluated by the four-point probe method. The sheet resistance of the deposited FTO on the wSG substrate was 7.84 ± 3.11 Ω/□, lower than that deposited on commercial soda-lime glass (8.48 ± 3.67 Ω/□), meaning that this material could present improved conduction of the produced electrons by the photovoltaic effect. This process may represent an alternative to produce glass substrates from waste materials that could be destined for photovoltaic applications, especially the production of ecological photovoltaic windows.

RESUMO

In the Atacama Desert, the spectral distribution of solar radiation differs from the global standard, showing very high levels of irradiation with a particularly high ultraviolet content. Additionally, the response of photovoltaic (PV) technologies is spectrally dependent, so it is necessary to consider local conditions and type of technology to optimize PV devices since solar cells are usually designed for maximum performance under standard testing conditions (STC). In this work, we determined geometrical and doping parameters to optimize the power of an n-type bifacial passivated emitter and rear totally diffused solar cell (n-PERT). Six parameters (the thicknesses of cell, emitter, and back surface field, as well as doping concentration of emitter, base, and back surface field) were used to optimize the cell under the Atacama Desert spectrum (AM 1.08) and under standard conditions (AM 1.5) through a genetic algorithm. To validate the model, the calculated performance of the n-PERT cell was compared with experimental measurements. Computed and experimental efficiencies showed a relative difference below 1% under STC conditions. Through the optimization process, we found that different geometry and doping concentrations are necessary for cells to be used in the Atacama Desert. Reducing the thickness of all layers and increasing doping can lead to a relative increment of 5.4% in the cell efficiency under AM 1.08. Finally, we show the potential effect of metallization and the viability of reducing the thicknesses of the emitter and the back surface field.

RESUMO

It is urgent to address climate change by radically changing our energy sources. Organic photovoltaics (OPVs) are a competitive clean energy emerging technology and will undoubtedly have a market niche in a world that needs to take advantage of every possible type of renewable energy. Recent studies have brought relevant improvements on internal efficiency, focusing on two properties at the interface: energetic disorder and bending. However, how positional disorder affects internal efficiency is still an open question. Here, we show that positional disorder is desired at the interface, but only up to a threshold value of 0.2 nm for poly p-phenylene vinylene. Using a kinetic Monte Carlo simulator, we realized that not enough excitons were reaching the interface, and introduced the Beer-Lambert law of attenuance to correct it. Furthermore, we realized that the same disorder that facilitates charge separation at the interface diminishes exciton and charge mobility in bulk, so we propose here a new morphology for the active layer of OPVs. Our suggestion implicates in better overall performance, improving not just the internal but the overall cell efficiency.

RESUMO

Since the beginning of the 21st century, triazine-based molecules have been employed to construct different organic materials due to their unique optoelectronic properties. Among their applications, photovoltaics stands out because of the current need to develop efficient, economic, and green alternatives to energy generation based mainly on fossil fuels. Here, we review all the development of triazine-based organic materials for solar cell applications, including organic solar cells, dye-sensitized solar cells, and perovskite solar cells. Firstly, we attempt to illustrate the main synthetic routes to prepare triazine derivatives. Then, we introduce the main aspects associated with solar cells and their performance. Afterward, we discuss different works focused on the preparation, characterization, and evaluation of triazine derivatives in solar cells, distinguishing the type of photovoltaics and the role of the triazine-based material in their performance (e.g., as a donor, acceptor, hole-transporting material, electron-transporting material, among others). Throughout this review, the progress, drawbacks, and main issues of the performance of the mentioned solar cells are exposed and discussed. Finally, some conclusions and perspectives about this research topic are mentioned.

Assuntos

RESUMO

The electrical behavior of photovoltaic materials related with Cu2ZnTiS4and Cu2ZnSnS4materials were analyzed as function of synthesis temperature in accordance with a new mathematical model based on the Kramers-Kronig equations with a high reliability. The samples were obtained through a hydrothermal route and a subsequent thermal treatment of solids at 550 °C for 1 h under nitrogen flow (50 ml min-1). The characterization was done by x-ray diffraction, ultraviolet spectroscopy (UV), Raman spectroscopy, atomic force microscopy (AFM) and solid state impedance spectroscopy (IS) techniques. The structural characterization, confirm the obtention of a tetragonal material with spatial groupI-42m, oriented along (1 1 2) facet, with nanometric crystal sizes (5-6 nm). The AFM and Raman analysis confirm a high level of chemical homogeneity and correlation with the synthesis temperature, associated with the roughness of the samples. The UV spectroscopy confirm a band gap around 1.4-1.5 eV, evidencing the effectiveness of the synthesis process. The IS results at room temperature with a probability of 95%, confirm a high consistency of data with respect to values of real and imaginary impedance, allowing to obtain information of the conductance, reactance and inductance, achieving conductivity values around 10-5and 10-3Ω-1 m-1in comparison with traditional mathematical models used for this purpose.

RESUMO

All inorganic layer-by-layer (LbL) thin films composed by TiO2nanoparticles and [Al(OH)4]-anions (TiO2/AlOx) as well as Al2O3and Nb2O5nanoparticles (Al2O3/Nb2O5) have been deposited to fluorine-doped tin-oxide coated glass (FTO) surfaces and applied as blocking layers in dye-sensitized solar cells (DSCs). Structural and morphological characterization of the LbL films by different techniques reveal that inTiO2/AlOxassembly, aluminate anions undergo condensation reactions on the TiO2surface leading to the formation of highly homogeneous films with unique optical properties. After 25 depositions transmittance losses below 10% in relation to the bare FTO substrate are observed. Electrochemical impedance spectroscopy shows thatTiO2/AlOxlayers impose an effective barrier for the charge recombination at FTO/electrolyte interface with an electron exchange time constant 50-fold higher than that for bare FTO. As a result, an improvement of 85% in the overall conversion efficiency of DSCs was observed with the employment of TiO2/AlOxblocking layers.Al2O3/Nb2O5LbL films can also work as blocking layers in DSCs but not as efficient, which is associated with the poor homogeneity of the film and its capacitive behavior. The production of cost-effective blocking layers with a low light scattering in the visible region is an important feature toward the application of DSC in other Building-integrated photovoltaic applications.

RESUMO

We present an extensive study of the optical properties of Myrcia sylvatica essential oil with the goal of investigating the suitability of its material system for uses in organic photovoltaics. The methods of extraction, experimental analysis, and theoretical modeling are described in detail. The precise composition of the oil in our samples is determined via gas chromatography, mass spectrometry, and X-ray scattering techniques. The measurements indicate that, indeed, the material system of Myrcia sylvatica essential oil may be successfully employed for the design of organic photovoltaic devices. The optical absorption of the molecules that compose the oil are calculated using time-dependent density functional theory and used to explain the measured UV-Vis spectra of the oil. We show that it is sufficient to consider the α-bisabolol/cadalene pair, two of the main constituents of the oil, to obtain the main features of the UV-Vis spectra. This finding is of importance for future works that aim to use Myrcia sylvatica essential oil as a photovoltaic material.

Assuntos

RESUMO

The title compound, C17H12O, crystallized with three independent mol-ecules (A, B and C) in the asymmetric unit. In the crystal, the three independent mol-ecules are linked by π-π inter-actions [centroid-centroid distances = 3.551 (3)-3.977 (2) Å], which lead to the formation of trimers. Between the trimers there are a number of C-H⋯π inter-actions generating a laminar arrangement parallel to (010). The meth-oxy-methyl group in mol-ecule A is disordered over two sets of sites, with an occupancy ratio of 0.56 (9):0.44 (9).

RESUMO

Our group previously reported the synthesis of four polythiophene derivatives (P1-P4) used for solar cells. The cells were prepared under room conditions by spin coating, leading to low efficiencies. However, after the addition of 6-nitro-3-(E)-3-(4-dimethylaminophenyl)allylidene)-2,3-dihydrobenzo[d]-[1,3,2] oxazaborole (M1) to their active layers, the efficiencies of the cells showed approximately a two-fold improvement. In this paper, we study this enhancement mechanism by performing ultrafast transient absorption (TA) experiments on the active layer of the different cells. Our samples consisted of thin films of a mixture of PC61BM with the polythiophenes derivatives P1-P4. We prepared two versions of each sample, one including the molecule M1 and another without it. The TA data suggests that the efficiency improvement after addition of M1 is due not only to an extended absorption spectrum towards the infrared region causing a larger population of excitons but also to the possible creation of additional channels for transport of excitons and/or electrons to the PC61BM interface.