RESUMO

OBJECTIVE: to determine the presence of marginal bacterial microfiltration in the IAI in different implant/abutment systems, in vitro. MATERIAL AND METHODS: Fifty-six implants from seven different brand names, 4 with cone and 3 with straight connections were used, implant and abutment were connected using the Ncm tightening as indicated by each of the manufacturers and then were sealed. The samples were subjected occlusal load and thermal cycling, a first sample of each group was observed by micro CT and in a second sample (both samples randomly selected) length of connection was measured, while the rest of the samples were mounted on devices according to the bacterial microfiltration model with Porphyromonas gingivalis. RESULTS: Two of the conical connection system groups did not present bacterial microfiltration, one of the three straight connection groups only microfiltered in one sample, while the other two conical as well as the two straight connection samples showed different and important levels of bacterial microfiltration, all groups presented a direct relationship between the implant-abutment adjustment determined by micro-CT and bacterial microfiltration levels, not related to the connection length. CONCLUSION: Only two conical connection systems presented no bacterial microfiltration.

Assuntos

RESUMO

BACKGROUND: The goal of this study was to analyze the stress distribution on two types of extra-short dental implants with 5 mm of length: An internal hexagon (IH) and morse taper connection (MT). METHODS: The three-dimensional model was composed of trabecular and cortical bone, a crown, an extra-short dental implant and their components. An axial load of 150 N was applied and another inclined 30° with the same magnitude. RESULTS: Stress concentrations on the IH implant are observed in the region of the first threads for the screw. However, in the MT implant the highest stress occurs at the edges of the upper implant platform. CONCLUSIONS: In view of the results obtained in this study the two types of prosthetic fittings present a good stress distribution. The Morse taper connections presented better behavior than the internal in both loading configurations.

RESUMO

INTRODUCTION: In implant rehabilitation, a microspace is created at the abutment-implant interface (AII). Previous research has shown that oral microbiome can proliferate in this microspace and affect periimplant tissues, causing inflammation in peri-implant tissues. Preventing microbial leakages through the AII is therefore an important goal in implantology. OBJECTIVE: To determine the presence of marginal bacterial microleakage at the AII according to the torque applied to the prosthetic implant in vitro. MATERIAL AND METHODS: Twenty-five Ticare Inhex internal conical implants (MG Mozo-Grau, Valladolid, España) were connected to a prosthetic abutment using torques of <10, 10, 20, 30, and 30 N and then sealed. The samples were submitted to cycles of occlusal loads and thermocycling, then one sample of each group was observed by micro TC, while the rest were mounted on devices according to the bacterial leakage model with Porphyromonas gingivalis. RESULTS: Bacterial leakage was observed only in the <10 and 10 N torque samples, and the same groups presented poor abutment/implant adjustment as determined by micro-CT. CONCLUSION: The different torques applied to the abutment-implant system condition the bacterial leakage at the implant interface. No microleakage was observed at 20 and 30 N.

Assuntos

RESUMO

OBJECTIVE: This study determined the degree of marginal microleakage of the abutment-implant interface on platforms with Morse taper connection and external connection. MATERIALS AND METHODS: For this in vitro study, 42 implants, 21 with external connection and 21 with Morse taper connection, were used, immersed in acrylic resin cylinders. Each implant was joined by a prosthetic abutment screw tightened at different degrees, forming the six study groups: (1) External connection, manual tightening (2) External connection, 20 Newton (N) tightening (3) External connection, 30 N tightening (4) Morse taper connection, manual tightening (5) Morse taper connection, 20 N tightening (6) orse taper connection, 30 N tightening. All samples were subjected to load cycling and thermocycling. Then, they were submerged in a solution of 0.2% methylene blue for 24 h. Finally, the microleakage was measured via 20× optical microscopy in each study group, average was obtained, and Mann-Whitney test was applied. RESULTS: Statistically significant differences (P < 0.001) were found between the levels of microleakage presented in the Morse taper connection implants (1.48) and external connection implants (2.8) in all three types of tightening. Microleakage levels decreases when increasing torque is applied to the screws. CONCLUSION: Morse taper connection implants showed lower levels of microleakage than external connection implants; also, it was observed that microleakage decreases in the way torque increases.

Assuntos

RESUMO

Introducción: este reporte clínico pretende presentar los resultados obtenidos con un sistema de implantes que modifica el protocolo convencional quirúrgico en cuanto a las revoluciones de fresado, no uso de irrigación, recolección del hueso nativo y opciones protésicas como la corona integrada al pilar, la cementación extraoral y la posición universal del pilar. En cuanto a su diseño se destaca el uso de implantes cortos, plataforma reducida, aletas laterales, conexión al pilar por cierrefriccional y superficie alterada. Métodos: se colocaron treinta implantes Bicon® de seis milímetros de longitud para restauración de diente único en veintidós pacientes. Se hizo el protocolo quirúrgico de acuerdo con las recomendaciones del fabricante y endos fases quirúrgicas. Se hizo la cirugía de destape de cada implante y se cementaron todas las restauraciones metal-cerámicas. Resultados: se reporta 100% de oseointegración de los implantes al momento de la cirugía de destape, con ausencia de movilidado dolor durante la función, ausencia de exudado y normalidad de los tejidos blandos periimplantares; se reporta ausencia de radiolucidez en la evaluación radiográfica. Conclusión: en este estudio podemos concluir que con el protocolo quirúrgico modificado y el diseño del implante Bicon® (Bicon™ Dental Implants, Boston, MA) se logró el 100% de éxito en la oseointegraciónde treinta implantes cortos al momento de la cirugía de destape, con superficie alterada y plataforma reducida, colocados para la restauración de diente único en diferentes zonas de la cavidad oral.

Introduction: the purpose of this clinical report is to present the collected results with an implant system that modifies the classical protocol regarding drilling speed, use of irrigation, native bone collecting and prosthetic options including crown integrated to the abutment, extraoral cementing of the crown and universal position of abutment screw. Regarding implant design, it´s important to highlight the use of short implants, with reduced platform, lateral wings instead of screw threads, abutmentconnection by means of friction and modified implant surface. Methods: 30 Bicon® implants, all six-mm of length, were placed in order to perform single tooth restorations in 22 patients. The surgical protocol was performed according to indications of themanufacturer in two surgical stages. The implants were uncovered and all metal-ceramic crowns were cemented. Results: the percentage of osseointegration success was 100% at the time of uncovering, without pain or mobility during function, no signs ofinfection and healthy appearance of peri-implant tissues. There were no radiographic changes at the x-ray evaluation. Conclusion: considering the limitations of this study, it can be concluded that with the modified surgical protocol and the structural design of the Bicon® Implant (Bicon™ Dental Implants, Boston, MA) a 100% osseointegration success was achieved on 30 implants with modified surface and reduced platform, placed in different areas of the oral cavity for single-tooth restoration.

Assuntos