RESUMO

Processes of water retention and movement and the hydraulic conductivity are altered in the rhizosphere. The aim of this study was to investigate the physical-hydric properties of soil aggregates in the rhizosphere of annual ryegrass (Lolium multiflorum) cropped in a Kandiudalfic Eutrudox, taking into account aspects related to soil aggregate stability. Soil aggregates from rhizosphere soil (RZS) and soil between plant rows (SBP) were used to determine soil water retention curves (SWRCs) and saturated hydraulic conductivity (Ksat). In addition, properties related to soil aggregate stability, such as water-dispersible clay, soil organic carbon (SOC), and microbial activity, were also assessed. The higher microbial activity observed in the RZS was facilitated by increased SOC and microbial activity, resulting in improved soil aggregation (less water-dispersible clay). For nearly all measured matric potentials, RZS had a higher water content than SBP. This was attributed to the stability of aggregates, increase in SOC content, and the root exudates, which improved soil water retention. The increase in total porosity in RZS was associated with improved soil aggregation, which prevents deterioration of the soil pore space and results in higher Ksat and hydraulic conductivity as a function of the effective relative saturation in RZS compared to SBP.

RESUMO

In the context of hydroelectric plants, this article emphasizes the imperative of robust monitoring strategies. The utilization of fiber-optic sensors (FOSs) emerges as a promising approach due to their efficient optical transmission, minimal signal attenuation, and resistance to electromagnetic interference. These optical sensors have demonstrated success in diverse structures, including bridges and nuclear plants, especially in challenging environments. This article culminates with the depiction of the development of an array of sensors featuring Fiber Bragg Gratings (FBGs). This array is designed to measure deformation and temperature in protective grids surrounding the turbines at the Santo Antônio Hydroelectric Plant. Implemented in a real-world scenario, the device identifies deformation peaks, indicative of water flow obstructions, thereby contributing significantly to the safety and operational efficiency of the plant.

RESUMO

Vulnerability curves (VCs) have been measured extensively to describe the differences in plant vulnerability to cavitation. Although the roles of hydraulic conductivity (Ks,max) and hydraulic safety (P50, embolism resistance), both of which are parameters of VCs ('sigmoidal' type), in tree demography have been evaluated across different forests, the direct linkages between VCs and tree demography are rarely explored. In this study, we combined measured VCs and plot data of 16 tree species in Panamanian seasonal tropical forests to investigate the connections between VCs and tree mortality, recruitment and growth. We found that the mortality and recruitment rates of evergreen species were most significantly positively correlated with P50. However, the mortality and recruitment rates of deciduous species only exhibited significant positive correlations with parameter a, which describes the steepness of VCs and indicates the sensitivity of conductivity loss with water potential decline, but is often neglected. These differences among evergreen and deciduous species may contribute to the poor performance of existing quantitative relationships (such as the fitting relationships for all 16 species) in capturing tree mortality and recruitment dynamics. Additionally, evergreen species presented a significant positive relationship between relative growth rate (RGR) and Ks,max, while deciduous species did not display such relationship. The RGR of both evergreen and deciduous species also displayed no significant correlations with P50 and a. Further analysis demonstrated that species with steeper VCs tended to have high mortality and recruitment rates, while species with flatter VCs were usually those with low mortality and recruitment rates. Our results highlight the important role of parameter a in tree demography, especially for deciduous species. Given that VC is a key component of plant hydraulic models, integrating measured VC rather than optimizing its parameters will help improve the ability to simulate and predict forest response to water availability.

Assuntos

RESUMO

Increases in hydrological extremes, including drought, are expected for Amazon forests. A fundamental challenge for predicting forest responses lies in identifying ecological strategies which underlie such responses. Characterization of species-specific hydraulic strategies for regulating water-use, thought to be arrayed along an 'isohydric-anisohydric' spectrum, is a widely used approach. However, recent studies have questioned the usefulness of this classification scheme, because its metrics are strongly influenced by environments, and hence can lead to divergent classifications even within the same species. Here, we propose an alternative approach positing that individual hydraulic regulation strategies emerge from the interaction of environments with traits. Specifically, we hypothesize that the vertical forest profile represents a key gradient in drought-related environments (atmospheric vapor pressure deficit, soil water availability) that drives divergent tree water-use strategies for coordinated regulation of stomatal conductance (gs) and leaf water potentials (ΨL) with tree rooting depth, a proxy for water availability. Testing this hypothesis in a seasonal eastern Amazon forest in Brazil, we found that hydraulic strategies indeed depend on height-associated environments. Upper canopy trees, experiencing high vapor pressure deficit (VPD), but stable soil water access through deep rooting, exhibited isohydric strategies, defined by little seasonal change in the diurnal pattern of gs and steady seasonal minimum ΨL. In contrast, understory trees, exposed to less variable VPD but highly variable soil water availability, exhibited anisohydric strategies, with fluctuations in diurnal gs that increased in the dry season along with increasing variation in ΨL. Our finding that canopy height structures the coordination between drought-related environmental stressors and hydraulic traits provides a basis for preserving the applicability of the isohydric-to-anisohydric spectrum, which we show here may consistently emerge from environmental context. Our work highlights the importance of understanding how environmental heterogeneity structures forest responses to climate change, providing a mechanistic basis for improving models of tropical ecosystems.

Assuntos

RESUMO

Forest ecosystems face increasing drought exposure due to climate change, necessitating accurate measurements of vegetation water content to assess drought stress and tree mortality risks. Although Frequency Domain Reflectometry offers a viable method for monitoring stem water content by measuring dielectric permittivity, challenges arise from uncertainties in sensor calibration linked to wood properties and species variability, impeding its wider usage. We sampled tropical forest trees and palms in eastern Amazônia to evaluate how sensor output differences are controlled by wood density, temperature and taxonomic identity. Three individuals per species were felled and cut into segments within a diverse dataset comprising five dicotyledonous tree and three monocotyledonous palm species on a wide range of wood densities. Water content was estimated gravimetrically for each segment using a temporally explicit wet-up/dry-down approach and the relationship with the dielectric permittivity was examined. Woody tissue density had no significant impact on the calibration, but species identity and temperature significantly affected sensor readings. The temperature artefact was quantitatively important at large temperature differences, which may have led to significant bias of daily and seasonal water content dynamics in previous studies. We established the first tropical tree and palm calibration equation which performed well for estimating water content. Notably, we demonstrated that the sensitivity remained consistent across species, enabling the creation of a simplified one-slope calibration for accurate, species-independent measurements of relative water content. Our one-slope calibration serves as a general, species-independent standard calibration for assessing relative water content in woody tissue, offering a valuable tool for quantifying drought responses and stress in trees and forest ecosystems.

Assuntos

RESUMO

A new, sustainable polypropylene terephthalate (PPT) coating was synthesized from recycled polyethylene terephthalate (PET) and applied onto a hydraulic concrete substrate to improve its durability. For the first step, PET bottle wastes were ground and depolymerized by glycolysis using propylene glycol (PG) in a vessel-type reactor (20-180 °C) to synthesize bis(2-hydroxypropyl)-terephthalate (BHPT), which was applied as a coating to one to three layers of hydraulic concrete substrate using the brushing technique and polymerized (150 °C for 15 h) to obtain PPT. PET, BHPT, and PPT were characterized by FT-IR, PET, and PPT using TGA, and the PPT coatings by SEM (thickness), ASTM-D3359-17 (adhesion), and water contact angle (wettability). The durability of hydraulic concrete coated with PPT was studied using resist chloride ion penetration (ASTM-C1202-17), carbonation depth at 28 days (RILEM-CPC-18), and the absorption water ratio (ASTM-C1585-20). The results demonstrated that the BHPT and PPT were synthetized (FT-IR), and PPT had a similar thermal behavior to PET (TGA); the PPT coatings had good adhesion to the substrate, with thicknesses of micrometric units. PPT coatings presented hydrophilic hydrophilic behavior like PET coatings, and the durability of hydraulic concrete coated with PPT (2-3 layers) improved (migration of chloride ions decreased, carbonation depth was negligible, and the absorption water ratio decreased).

RESUMO

BACKGROUND AND AIMS: Lianas have higher relative abundance and biomass in drier seasonal forests than in rainforests, but whether this difference is associated with their hydraulic strategies is unclear. Here, we investigate whether lianas of seasonally dry forests are safer and more efficient in water transport than rainforest lianas, explaining patterns of liana abundance. METHODS: We measured hydraulic traits on five pairs of congeneric lianas of the tribe Bignonieae in two contrasting forest sites: the wet 'Dense Ombrophilous Forest' in Central Amazonia (~2 dry months) and the drier 'Semideciduous Seasonal Forest' in the inland Atlantic Forest (~6 dry months). We also gathered a broader database, including 197 trees and 58 liana species from different tropical forests, to compare hydraulic safety between habits and forest types. KEY RESULTS: Bignonieae lianas from both forests had high and similar hydraulic efficiency but exhibited variability in resistance to embolism across forest types when phylogenetic relationships were taken into account. Three genera had higher hydraulic safety in the seasonal forest than in the rainforest, but species across both forests had similar positive hydraulic safety margins despite lower predawn water potential values of seasonal forest lianas. We did not find the safety-efficiency trade-off. Merging our results with previously published data revealed a high variability of resistance to embolism in both trees and lianas, independent of forest types. CONCLUSIONS: The high hydraulic efficiency of lianas detected here probably favours their rapid growth across tropical forests, but differences in hydraulic safety highlight that some species are highly vulnerable and may rely on other mechanisms to cope with drought. Future research on the lethal dehydration threshold and the connection between hydraulic resistance strategies and liana abundance could offer further insights into tropical forest dynamics under climatic threats.

Assuntos

RESUMO

Embolism resistance of xylem tissue varies among species and is an important trait related to drought resistance, with anatomical attributes like pit membrane thickness playing an important role in avoiding embolism spread. Grafted Citrus trees are commonly grown in orchards, with the rootstock being able to affect the drought resistance of the whole plant. Here, we evaluated how rootstocks affect the vulnerability to embolism resistance of the scion using several rootstock/scion combinations. Scions of 'Tahiti' acid lime, 'Hamlin', 'Pera' and 'Valencia' oranges grafted on a 'Rangpur' lime rootstock exhibit similar vulnerability to embolism. In field-grown trees, measurements of leaf water potential did not suggest significant embolism formation during the dry season, while stomata of Citrus trees presented an isohydric response to declining water availability. When 'Valencia' orange scions were grafted on 'Rangpur' lime, 'IAC 1710' citrandarin, 'Sunki Tropical' mandarin or 'Swingle' citrumelo rootstocks, variation in intervessel pit membrane thickness of the scion was found. The 'Rangpur' lime rootstock, which is known for its drought resistance, induced thicker pit membranes in the scion, resulting in higher embolism resistance than the other rootstocks. Similarly, the rootstock 'IAC 1710' citrandarin generated increased embolism resistance of the scion, which is highly relevant for citriculture.

Assuntos

RESUMO

One of the well-documented effects of regional warming in Antarctica is the impact on flora. Warmer conditions modify several leaf anatomical traits of Antarctic vascular plants, increasing photosynthesis and growth. Given that CO2 and water vapor partially share their diffusion pathways through the leaf, changes in leaf anatomy could also affect the hydraulic traits of Antarctic plants. We evaluated the effects of growth temperature on several anatomical and hydraulic parameters of Antarctic plants and assessed the trait co-variation between these parameters and photosynthetic performance. Warmer conditions promoted an increase in leaf and whole plant hydraulic conductivity, correlating with adjustments in carbon assimilation. These adjustments were consistent with changes in leaf vasculature, where Antarctic species displayed different strategies. At higher temperature, Colobanthus quitensis decreased the number of leaf xylem vessels, but increased their diameter. In contrast, in Deschampsia antarctica the diameter did not change, but the number of vessels increased. Despite this contrasting behavior, some traits such as a small leaf diameter of vessels and a high cell wall rigidity were maintained in both species, suggesting a water-conservation response associated with the ability of Antarctic plants to cope with harsh environments.

Assuntos

RESUMO

PURPOSE: Evaluate the structural damage and the changes in the photosynthesis and transpiration rates of aquatic lirium leaves caused by ultrasound (US) irradiation in search of environmentally friendly methodologies for the control of this weed. MATERIALS AND METHODS: Aquatic lirium plants were extracted from Xochimilco water canals in Mexico City. A part of the group of plants was selected for irradiation, and the rest formed the control group. The irradiation plants group was exposed to US irradiation of 17 kHz frequency and 30 W × 4 output power for 2 h, at noon and 25 °C room temperature. The structural analysis was done with a MOTICAM 1 digital camera, 800 × 600 pixels, incorporated into the MOTIC PSM-1000 optical microscope and edited with Motic Images Plus 2.0 ML software. The total stomata density and the damaged stomata density were determined by dividing the numbers of total and damaged stomata by the visual field area (67,917 mm2), respectively. The leaves' photosynthesis and transpiration rates were measured using an LI-6400XT Portable Photosynthesis System. RESULTS: Significant damage was observed in the stomata and epidermal cells, finding that the average ratio between the damaged and total stomata densities as a function of time (days) showed an exponential increase described by a Box-Lucas equation with a saturation value near unity and a maximum rate of change of the density of damaged stomata on zero-day (immediately after irradiation), decreasing as the days go by. The transpiration rate showed a sudden increase during the first hour after irradiation, reaching a maximum of 36% of its value before irradiation. It then quickly fell during the next 6 days and more slowly until the 21st day, decreasing 79.9% of its value before irradiation. The photosynthetic rate showed similar behavior with a 37.7% maximum increment and a 73.6% minimum decrease of its value before irradiation. CONCLUSIONS: The results of structural stomata damage on the ultrasound-irradiated aquatic lirium leaves are consistent with an excessive ultrasound stimulation on stomata's mechanical operation by guard cells that produce the measured significant increase of the photosynthetic and transpiration rates during the first hour after irradiation. The initial high evaporation could alter the water potential gradient, with a possible generation of tensions in the xylem that could cause embolism in their conduits. The loss of xylem conductivity or hydraulic failure would be consistent with the observed significant fall in the photosynthesis and transpiration rates of the aquatic lirium leaves after its sudden rise in the first hour after irradiation.

Assuntos

RESUMO

Creosote is an organic pollutant formed by a complex mixture of highly toxic and carcinogenic compounds and classified as a dense non-aqueous phase liquid (DNAPL). Its migration depends on media and fluid properties that control the multiphase flow in the subsurface. Residual saturation and hydraulic conductivity are essential parameters to accurately simulate fluid displacement in porous media. This work shows the behavior of creosote in porous medium for sandy and clay soils, collected in a contaminated area in the state of São Paulo, Brazil. Creosote retention was evaluated and compared to water. The retention curve parameters were obtained based on van Genuchten and Brooks and Corey models. The hydraulic conductivities of creosote and water are presented for both soils. The results show that, in the clay soil, water was more retained than creosote, while in the sandy soil, creosote retention was higher. The hydraulic conductivity values obtained in the clay soil show a difference of two orders of magnitude between creosote and water. Although creosote is a viscous fluid, it presents considerable mobility in the clay soil, which is relevant in remediation processes. This study advances our knowledge about DNAPL behavior in clay and sand, and no other study of creosote parameters in these porous media was found. A more accurate estimate of the time required for a liquid spill to reach groundwater can then be predicted, so that appropriate actions can be taken and risk management can be carried out.

Assuntos

RESUMO

PREMISE: Plants survive in habitats with limited resource availability and contrasting environments by responding to variation in environmental factors through morphophysiological traits related to species performance in different ecosystems. However, how different plant strategies influence the megadiversity of tropical species has remained a knowledge gap. METHODS: We analyzed variations in 27 morphophysiological traits of leaves and secondary xylem in Erythroxylum pulchrum and Tapirira guianensis, which have the highest absolute dominance in these physiognomies and occur together in areas of restinga and dense ombrophilous forest to infer water-transport strategies of Atlantic Forest woody plants. RESULTS: The two species presented different sets of morphophysiological traits, strategies to avoid embolism and ensure water transport, in different phytophysiognomies. Tapirira guianensis showed possible adaptations influenced by phytophysiognomy, while E. pulchrum showed less variation in the set of characteristics between different phytophysiognomies. CONCLUSIONS: Our results provide essential tools to understand how the environment can modulate morphofunctional traits and how each species adjusts differently to adapt to different phytophysiognomies. In this sense, the results for these species reveal new species-specific responses in the tropical forest. Such knowledge is a prerequisite to predict future development of the most vulnerable forests as climate changes.

Assuntos

RESUMO

This paper aimed to analyze the reduction in the ballast layer permeability simulated in a laboratory in saturated conditions by the presence of rock dust as a contaminant of three types of rocks explored in different deposits in the northern region of the state of Rio de Janeiro, Brazil, through laboratory testing relating the physical properties of rock particles before and after sodium sulfate attack. Sodium sulfate attack is justified by the proximity of some sections of the planned EF-118 Vitória-Rio railway line to the coast and of the sulfated water table to the ballast bed, which could degrade the material used and compromise the railway track. Granulometry and permeability tests were performed to compare ballast samples with fouling rates of 0, 10, 20, and 40% rock dust by volume. A constant head permeameter was used to analyze hydraulic conductivity and establish correlations between the petrography and mercury intrusion porosimetry of the rocks, namely two types of metagranite (Mg1 and Mg3) and a gneisse (Gn2). Rocks, such as Mg1 and Mg3, with a larger composition of minerals susceptible to weathering according to petrography analyses, tend to be more sensitive to weathering tests. This, in conjunction with the climate in the region studied, with average annual temperature and rainfall of 27 °C and 1200 mm, could compromise track safety and user comfort. Additionally, the Mg1 and Mg3 samples showed greater percentage variation in wear after the Micro-Deval test, which could damage the ballast due to the considerable changeability of the material. The mass loss caused by abrasion due to the passage of rail vehicles was assessed by the Micro-Deval test, with Mg3 (intact rock) declining from 8.50 ± 1.5 to 11.04 ± 0.5% after chemical attack. However, Gn2, which exhibited the greatest mass loss among the samples, showed no significant variation in average wear, and its mineralogical characteristics remained almost unchanged after 60 sodium sulfate cycles. These aspects, combined with its satisfactory hydraulic conductivity rate, indicate that Gn2 is suitable for use as railway ballast in the EF-118 railway line.

RESUMO

The exploration of unconventional hydrocarbons may be very effective in promoting economic development and confronting energy crisis around the world. However, the environmental risks associated with this practice might be an impediment if not adequately dimensioned. In this context, naturally occurring radioactive materials and ionizing radiation are sensitive aspects in the unconventional gas industry that may compromise the environmental sustainability of gas production and they should be properly monitored. This paper provides a radioecological assessment of the São Francisco Basin (Brazil) as part of an environmental baseline evaluation regarding the Brazilian potential for exploring its unconventional gas reserves. Eleven and thirteen samples of surface waters and groundwater were analyzed for gross alpha and beta using a gas flow proportional counter. A radiological background range was proposed using the ± 2 Median Absolute Deviation method. Using geoprocessing tools, the annual equivalent doses and lifetime cancer risk indexes were spatialized. Gross alpha and beta background thresholds in surface water ranged from 0.04-0.40 Bq L-1 to 0.17-0.46 Bq L-, respectively. Groundwater radiological background varies from 0.006-0.81 Bq L-1 to 0.06-0.72 Bq L-1 for gross alpha and beta, respectively. All environmental indexes are relatively higher in the south of the basin, probably a direct response to the local volcanic formations. Traçadal fault and local gas seepages might also influence the gross alpha and beta distribution. All samples have radiological indexes below the environmental thresholds, and should remain at acceptable levels with the development of the unconventional gas industry in Brazil.

Assuntos

RESUMO

Tree breeding programs and wood industries require simple, time- and cost-effective techniques to process large volumes of samples. In recent decades, near-infrared spectroscopy (NIRS) has been acknowledged as one of the most powerful techniques for wood analysis, making it the most used tool for high-throughput phenotyping. Previous studies have shown that a significant number of anatomical, physical, chemical and mechanical wood properties can be estimated through NIRS, both for angiosperm and gymnosperm species. However, the ability of this technique to predict functional traits related to drought resistance has been poorly explored, especially in angiosperm species. This is particularly relevant since determining xylem hydraulic properties by conventional techniques is complex and time-consuming, clearly limiting its use in studies and applications that demand large amounts of samples. In this study, we measured several wood anatomical and hydraulic traits and collected NIR spectra in branches of two Eucalyptus L'Hér species. We developed NIRS calibration models and discussed their ability to accurately predict the studied traits. The models generated allowed us to adequately calibrate the reference traits, with high R2 (≥0.75) for traits such as P12, P88, the slope of the vulnerability curves to xylem embolism or the fiber wall fraction, and with lower R2 (0.39-0.52) for P50, maximum hydraulic conductivity or frequency of ray parenchyma. We found that certain wavenumbers improve models' calibration, with those in the range of 4000-5500 cm-1 predicting the highest number of both anatomical and functional traits. We concluded that the use of NIRS allows calibrating models with potential predictive value not only for wood structural and chemical variables but also for anatomical and functional traits related to drought resistance in wood types with complex structure as eucalypts. These results are promising in light of the required knowledge about species and genotypes adaptability to global climatic change.

Assuntos

RESUMO

Anaerobic digestion under simplified conditions can contribute to food waste decentralised management. However, there is an absence of knowledge on the effect of long-term operation under these conditions. This study aimed to evaluate the operational conditions of an anaerobic reactor treating food waste after long-term operation without temperature control and low-intensity mixing. For this, a demonstration-scale reactor (18.8 m3) was operated for 160 days, while stability parameters were used to control the applied organic loading rate (OLR). Stability parameters indicated that the reactor was operated at stable conditions with an OLR of 0.3 kg VS m-3 d-1, while it was overloaded at an OLR of 0.4 kg VS m-3 d-1. This was observed through high value of intermediate and partial alkalinity ratio (IA/PA ratio), 2.5, and low values of bicarbonate alkalinity and pH, 1800 mg CaCO3 L-1 and 6.8, respectively. Moreover, there was a change in the concentration of intermediated metabolites, with a higher content of propionate and acetate, 1080 and 3775 mg L-1, respectively. Consequently, the methane production rate was decreased from 0.12 to 0.08 m3 CH4 m-3 d-1 and methane yield from 0.43 to 0.15 m3 CH4 kg VS-1. The reactor instability at a relatively low OLR was most probably due to hydrodynamic factors caused by the accumulation of recalcitrant material. Therefore, this material reduced the reactor performance and requires attention for a sustainable long-term operation.

Assuntos

RESUMO

Most commercial apple orchards are established on either Marubakaido (Malus prunifolia Borkh.) (high vigor), M-9 (Malus pumila) (low vigor), or a combination of both rootstocks through the intergrafting technique. The Geneva® Series rootstocks were developed as an alternative to orchards modernization. The vigor of rootstocks influences the anatomical xylem formation and, therefore, the canopy cultivar's hydraulic conductivity. When affected by embolism, hydraulic conductivity harms plant metabolism, reducing crop yield and fruit quality. This study aimed to evaluate four Geneva® Series rootstocks with potential use in southern Brazil, in terms of hydraulic conductivity (K) and percentage loss of conductance (PLC), during the winter period in two different years. The G.213 rootstock presented the best performance for the variables analyzed; however, higher values of xylem functionality loss were observed in G.814.

Assuntos

RESUMO

Stony soils have been increasingly used for agriculture production; however, little is known about their hydraulic properties due to problems, such as sample deformation and hydraulic continuity between samples and suction devices when the sampling and measurements are accomplished with traditional techniques. In this study, the traditional ring sampling technique was replaced by the sampling of undisturbed soil blocks coated with paraffin wax to preserve their structure. A saturated paste of fine-grained mineral particles was used to ensure contact and hydraulic continuity between samples and suction devices (sand table and ceramic plates). This allowed us to determine 30 water retention curves for three stony soils with coarse particle contents (> 2 mm) ranging from zero to 69 %. The van Genuchten model was fitted to the measured retention data and the root mean square errors were between 0.0034 and 0.0331 m3 m­3, with no outliers or odd behavior in the retention curves. These results showed that consistent water retention curves for stony soils can be determined with the technique proposed. Fine-grained minerals sandwiched between the surface of suctions sources and sampled blocks improve hydraulic continuity between them. These techniques can be applied to determine water retention properties in structured soil samples with coarse particles where it is unfeasible to collect structured soil samples with metal sampling rings.(AU)

Assuntos

RESUMO

The objective of this work was to evaluate the use of an ultrafine bubble generator of own manufacture for oxygenation of Nile tilapia (Oreochromis niloticus) breeding tanks in a recirculating water system. The research was divided into two steps: 1) oxygen saturation test; 2) application of ultrafine bubble production technology for the breeding of Nile tilapia. In the first step, the water of a 2.0 m3 test tank was completely deoxygenated and the ultrafine bubble generator was turned on for 60 min. In the second step, the generator was connected to the water recirculating system for breeding of Nile tilapia to compare the overall performance of this system with other under conventional aeration system. The ultrafine bubble generator could reach 100% oxygen saturation in the test tank (27.8 °C) in approximately 21 min and, at the end of 60 min, the concentration was 21.8 mg L-1 (277.52% saturation). The results showed significant difference (p<0.05) between the mean dissolved oxygen concentration in the treatment with ultrafine bubbles (9.80 ±3.68 mg L-1) and the treatment with conventional aeration (3.47 ± 0.88 mg L-1). No significant difference (p>0.05) was found for the zootechnical performance parameters evaluated. The conclusion was that the ultrafine bubble generator is more efficient to maintain a high dissolved oxygen concentration in the recirculating water in Nile tilapia breeding tanks than the conventional aeration system

O objetivo da presente pesquisa foi avaliar a utilização do gerador de bolhas ultrafinas (fabricação própria) para oxigenação de tanques de criação de tilápia do Nilo em sistema de recirculação de água. A pesquisa foi dividida em duas etapas: 1) teste de saturação de oxigênio; 2) aplicação da tecnologia de produção de bolhas ultrafinas na criação da tilápia do Nilo. Na primeira, a água de um tanque teste (2,0 m³) foi completamente desoxigenada e o gerador de bolhas ultrafinas acionado por um período de 60 min. Na segunda, o gerador foi ligado a um sistema de recirculação para criação de tilápia para comparar o desempenho geral desse sistema ao de outro no qual utilizou-se aeração convencional. O gerador de bolhas ultrafinas foi capaz de atingir 100% de saturação de oxigênio no tanque teste (27,8 °C) em aproximadamente 21 min e, ao final de 60 min, a concentração foi 21,8 mg/L (saturação 277,52%). Foi observada diferença significativa (p<0,05) entre a concentração média de oxigênio dissolvido no tratamento com bolhas ultrafinas (9,80 ± 3,68 mg/L) e o tratamento com aeração convencional (3,47 ± 0,88 mg/L). Não foi observada diferença significativa (p>0,05) para nenhum dos parâmetros de desempenho zootécnico avaliados. Pode-se concluir que o gerador de bolhas ultrafinas é mais eficiente em manter alta a concentração de oxigênio dissolvido em tanques de criação de tilápia em sistema de recirculação de água quando comparado ao sistema convencional de aeração

Assuntos

RESUMO

Abstract Few long-term studies assess the discoloration induced by hydraulic calcium silicate-based cement on dental structures. In addition, as far as we know, no long-term study has assessed the discoloration induced by these cement on composite resin. Objective This in vitro study aimed to assess, during a period of two years, the discoloration potential of different hydraulic calcium silicate-based cements (hCSCs) on the enamel/dentin structure and composite resin restoration. Methodology A total of 40 enamel/dentin discs were obtained from bovine incisors, and 40 composite resin discs (10 mm in diameter × 2 mm thick) were fabricated. A 0.8 mm-deep cavity was made in the center of each disc and filled with the following hCSCs (n=10): Original MTA (Angelus); MTA Repair HP (Angelus); NeoMTA Plus (Avalon); and Biodentine (Septodont). An initial color measurement was performed (T0 - baseline). After 7, 15, 30, 45, 90, 300 days, and two years, new color measurements were performed to determine the color (ΔE00), lightness (ΔL'), chroma (ΔC'), hue differences (ΔH'), and whiteness index (WID). Results For enamel/dentin, the ΔE00 was significant among groups and periods (p<0.05). NeoMTA Plus had the greatest ΔE00. The NeoMTA Plus group had the greatest ΔE00 after two years for composite resin. Significant reduction in lightness was observed for all groups after two years (p<0.05). The most significant WID values were observed after 30 days for Biodentine (enamel/dentin) and MTA Repair HP groups (composite resin) (p<0.05). Conclusions The hCSCs changed the colorimetric behavior of both substrates, leading to greater darkening over time. The Bi2O3 in the Original MTA seems relevant in the short periods of color change assessment.