RESUMO

Purpose: To evaluate, in vitro, the efficiency of a novel apparatus to test the adherence and penetration of bacteria on different membranes for guided regeneration. Methodology: To create the 3D device, Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) systems were used. Three types of biomaterials were tested (n = 6): (DT) a collagen membrane; (DS) a polymer membrane; and (LP) a dense polytetrafluoroethylene barrier. The biomaterials were adapted to the apparatuses and challenged with two different monospecies bacterial culture of A. actinomycetemcomitans b and S. mutans. After 2 h, bacterial adherence and penetration were quantified by counting the number of colony-forming units (CFUs). Two specimens from each group were used for image analysis using Confocal Laser Scanning Microscopy. Statistical analysis was performed. Findings: The DS group had a higher adherence of S. mutans compared to A. actinomycetemcomitans b (p = 0.05). There was less adherence of A. actinomycetemcomitans b in the DS group, compared to the LP (p = 0.011) and DT (p < 0.001) groups. Only the membranes allowed penetration, which was blocked by barriers. The DT group allowed a greater penetration of S. mutans to occur compared to A. actinomycetemcomitans b (p = 0.009), which showed a higher penetration into the DS membranes compared to S. mutans (p = 0.016). The penetration of A. actinomycetemcomitans b through DS was higher compared to its penetration through DT and LP (p < 0.01 for both). DT and DS allowed a greater penetration of S. mutans to occur compared to LP, which prevented both bacterial species from penetrating. Conclusion: The apparatus allowed for the settlement and complete sealing of the biomaterials, enabling standardization.

RESUMO

El tratamiento con implantes dentales hoy en día es un procedimiento clínico de rutina que permite rehabilitar a los pacientes con prótesis fijas. En este caso presentamos un tratamiento complejo de implantación inmediata del sector anterior con pérdida parcial de la cortical vestibular en el que se realizó una regeneración ósea guiada y provisionalización en un tiempo quirúrgico en un paciente con patología renal. Complementamos el estudio con una revisión de la efectividad de las técnicas utilizadas y las posibles respuestas celular asociadas a la patología renal.

Treatment with dental implants nowadays is a routine clinical procedure that allows patient rehabilitation with fixed prostheses. In this case we present a complex treatment of immediate implantation of the anterior sector with partial loss of the vestibular cortex, in which guided bone regeneration and provisionalization was performed in surgical time in a patient with kidney pathology. The study was complemented with a review of the effectiveness of the techniques used and the possible cellular responses associated with kidney pathology.

RESUMO

The purpose of this study was to evaluate the repair process in rat calvaria filled with synthetic biphasic bioceramics (Plenum® Osshp-70:30, HA:ßTCP) or autogenous bone, covered with a polydioxanone membrane (PDO). A total of 48 rats were divided into two groups (n = 24): particulate autogenous bone + Plenum® Guide (AUTOPT+PG) or Plenum® Osshp + Plenum® Guide (PO+PG). A defect was created in the calvaria, filled with the grafts, and covered with a PDO membrane, and euthanasia took place at 7, 30, and 60 days. Micro-CT showed no statistical difference between the groups, but there was an increase in bone volume (56.26%), the number of trabeculae (2.76 mm), and intersection surface (26.76 mm2) and a decrease in total porosity (43.79%) in the PO+PG group, as well as higher values for the daily mineral apposition rate (7.16 µm/day). Histometric analysis presented material replacement and increased bone formation at 30 days compared to 7 days in both groups. Immunostaining showed a similar pattern between the groups, with an increase in proteins related to bone remodeling and formation. In conclusion, Plenum® Osshp + Plenum® Guide showed similar and sometimes superior results when compared to autogenous bone, making it a competent option as a bone substitute.

RESUMO

PURPOSE: To evaluate the survival rates of dental implants with a hybrid macrostructure and the surface biomimetically coated with nanohydroxyapatite, placed in horizontally atrophic maxillae previously submitted to the guided bone regeneration (GBR) procedure, associated with the use of a deproteinized bovine bone graft (DBB). METHODS: Twenty-five patients who received 196 implants were involved in this study. First, these patients were submitted to GBR procedures and maxillary sinus lift, where DBB was used as the grafting material. The dental implants were placed after a minimum period of 6 months of the grafting procedures. The patients were followed up every six months and clinical/radiographic examinations were performed to assess the implants, using the following indicators as a reference: (1) Absence of mobility; (2) Absence of pain. Data about the age, surgery time, smoking status, implant size, and time between the grafting procedure and implant placement were correlated with implant failures. RESULTS: Twelve implants failed, generating a survival rate of 94.23%. None of the variables analysed correlated with the implant failures. CONCLUSION: Implants with a hybrid macrostructure and surface biomimetically coated with nanohydroxyapatite present good survival rates in horizontally atrophic maxillae grafted with DBB.

Assuntos

RESUMO

El fibroma ameloblástico (FA) se describe como una neoplasia benigna de origen odontogénico mixto que suele presentarse entre la primera y segunda década de vida, frecuentemente en los molares permanentes inferiores. Por lo general es asintomático, pero las lesiones de gran tamaño suelen acompañarse con dolor e inflamación. Su tratamiento por lo regular es conservador. Se describe el caso de un fibroma ameloblástico en un paciente de 13 años de edad, que involucraba cuerpo y ángulo mandibular izquierdo, tratado de manera conservadora, se realiza extirpación del tumor, regeneración ósea guiada y rehabilitación con implante dental (AU)

Ameloblastic fibroma (AF) is described as a benign neoplasm of mixed odontogenic origin that usually presents between the first and second decade of life, frequently in lower permanent molars. It is usually asymptomatic, but large lesions are usually accompanied by pain and inflammation. His treatment is generally conservative. The clinical case of an ameloblastic fibroma in a 13-year-old patient is described, involving the left mandibular body and angle, treated conservatively, tumor removal, guided bone regeneration and rehabilitation with dental implants are performed (AU)

Assuntos

RESUMO

AIM: This investigation aimed to evaluate the 1-year survival of implants placed after staged lateral alveolar ridge augmentation using equine-derived collagenated xenogeneic bone blocks (CXBBs) or autogenous bone block (ABB). MATERIALS AND METHODS: Fifty patients who underwent lateral augmentation in a previous trial were included. The primary outcome measure was implant survival at the 1-year follow-up, and secondary outcomes included implant success, peri-implant clinical and volumetric parameters, pink aesthetic scores (PES) and patient-reported outcome measures. Data analysis involved Fisher's exact test, the Mann-Whitney U-test and the Wilcoxon signed-rank test. RESULTS: In this study, no late implant failures were observed. The cumulative survival rates were 78.6% for the CXBB group and 90.9% for the ABB group, with no difference between the groups. Similarly, the success rates were 53.6% and 63.6%, respectively, showing no significant difference. Peri-implant clinical and volumetric parameters indicated the presence of healthy peri-implant tissues surrounding implants placed in both CXBB- and ABB-augmented sites. PES were 8.5 and 11.0 for implants placed in CXBB- and ABB-augmented sites, respectively. Furthermore, patient satisfaction rates were high and similar between the groups. CONCLUSIONS: Dental implants placed in both CXBB- and ABB-augmented ridges demonstrated no statistically significant differences in clinical, volumetric and aesthetic outcomes, along with high patient satisfaction rates.

Assuntos

RESUMO

BACKGROUND: Polycaprolactone (PCL) is a highly recognized synthetic polymer for its biocompatibility, ease of fabrication and mechanical strength in bone tissue engineering. Its applications have extended broadly, including regeneration of oral and maxillofacial lost tissues. Its usefulness has brought attention of researchers to regenerate periodontal lost tissues, including alveolar bone, periodontal ligament and cementum. The aim of this systematic review was to obtain an updated analysis of the contribution of PCL-based scaffolds in the alveolar bone regeneration process. METHODS: This review adheres to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines for systematic reviews. A computerized search of the PubMed, EBSCO, Scielo and Web of Science databases was performed, restricting literature search to published studies in English or Spanish between January 2002 and March 2023. Database search returned 248 studies which were screened based on title, author names and publication dates. RESULTS: Data from 17 studies were reviewed and tabulated. All studies combined PCL with other biomaterials (such as Alginate, hydroxyapatite, bioactive glass, poly (lactic-co-glycolic acid)), growth factors (BMP-2, rhCEMP1), and/or mesenchymal stromal cells (adipose-derived, bone marrow, periodontal ligament or gingiva mesenchymal stromal cells). PCL scaffolds showed higher cell viability and osteoinductive potential when combined with bioactive agents. Complementary, its degradation rates were affected by the addition or exposure to specific substances, such as: Dopamine, Cerium Oxide, PLGA and hydrogen peroxide. CONCLUSIONS: PCL is an effective biomaterial for alveolar bone regeneration in periodontally affected teeth. It could be part of a new generation of biomaterials with improved regenerative potential.

Assuntos

RESUMO

The aim of this study was to evaluate the influence of different types of porosity of titanium meshes on the bone neoformation process in critical defects surgically created in rat calvaria, by means of microtomographic and histomorphometric analyses. Defects of 5 mm in diameter were created in the calvaria of 36 rats, and the animals were randomly treated and divided into the following groups (6 animals per group): NCOG (negative control, only blood clot), TEMG (Polytetrafluoroethylene-PTFE-membrane), SPTMG (small pore titanium mesh), SPMMG (small pore mesh + PTFE), LPTMG (large pore titanium mesh), and LPMMG (large pore mesh + PTFE). After 60 days, the animals were sacrificed, and the bone tissue formed was evaluated with micro-CT and histomorphometry. The data were compared using an ANOVA followed by the Tukey post-test (p ≤ 0.05). The microtomographic results showed that the SPTMG group presented the highest numerical value for bone volume/total volume (22.24 ± 8.97), with statistically significant differences for all the other groups except LPTMG. Considering the histomorphometric evaluation, groups with only porous titanium meshes showed higher values compared to the groups that used the PTFE membrane and the negative control. The SPTMG group presented higher values in the parameters of area (0.44 mm2 ± 0.06), extension (1.19 mm2 ± 0.12), and percentage (7.56 ± 1.45%) of neoformed bone. It was concluded that titanium mesh with smaller pores showed better results and that the association of PTFE membranes with titanium meshes did not improve the outcomes, suggesting a correlation between mesh porosity and underlying bone repair.

RESUMO

AIM: This bibliometric study analyzed the characteristics of the 100 most cited articles on bone grafts in dentistry. MATERIALS AND METHODS: A database search was performed on the Web of Science Core Collection using a specific search strategy. Scopus and Google Scholar were also consulted for citation comparisons. Data extracted included: title, citation metrics, publication year, journal, study design, graft material, surgical technique, authors, institution, and country. Bibliometric networks were generated using VOSviewer. RESULTS: The identified articles were published between 1991 and 2019. Citation counts ranged from 120 to 1161 (mean: 240, 30). Clinical Oral Implants Research was the most cited journal (5175 citations; 25/100). Xenogeneic bone graft material was the most frequently used (5130 citations; 22/100). Europe had 62 articles (14,604 citations), and the United States was the most prominent country (5209 citations; 22/100). The University of Bern had the highest number of citations (2565 citations; 13/100), with Buser D as the author with the largest number of articles (2648 citations; 12/100). CONCLUSION: This study shows the scientific progress on bone grafts in dentistry. The use of xenogeneic grafts for horizontal and/or vertical ridge augmentation was the most prominent trend.

Assuntos

RESUMO

BACKGROUND: Bovine pericardium (BP) is a scaffold widely used in soft tissues regeneration; however, its calcification in contact with glutaraldehyde, represent an opportunity for its application in hard tissues, such as bone in the oral cavity. OBJECTIVE: To develop and to characterize decellularized and glutaraldehyde-crosslinked bovine pericardium (GC-BP) as a potential scaffold for guided bone regeneration GBR. METHODS: BP samples from healthy animals of the bovine zebu breed were decellularized and crosslinked by digestion with detergents and glutaraldehyde respectively. The resulting cell-free scaffold was physical, chemical, mechanical, and biologically characterized thought hematoxylin and eosin staining, DNA quantification, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), uniaxial tensile test, cell viability and live and dead assay in cultures of dental pulp stem cells (DPSCs). RESULTS: The decellularization and crosslinking of BP appeared to induce conformational changes of the CLG molecules, which led to lower mechanical properties at the GC-BP scaffold, at the same time that promoted cell adhesion and viability of DPSCs. CONCLUSION: This study suggests that the decellularized and GC-BP is a scaffold with the potential to be used promoting DPSCs recruitment, which has a great impact on the dental area.

Assuntos

RESUMO

Objetivo: revisar a literatura sobre os diferentes tipos de derivados de plaquetas autólogas e o desempenho clínico do uso do sticky bone para aumento ósseo horizontal de rebordo. Materiais e métodos: Para realização dessa revisão foram realizadas buscas nas bases de dados PubMed, Google Scholar e Web of Science, utilizando os seguintes descritores: "platelet-rich fibrin" AND "sticky bone" OR "alveolar bone grafting" AND "sticky bone" OR "guided bone regeneration" AND "sticky bone" AND "alveolar ridge augmentation" OR "Alveolar ridge augmentation" AND "sticky bone". Foram incluídos artigos publicados em inglês, que abordavam conceitos relacionados aos agregados plaquetários e a regeneração óssea guiada para aumento ósseo horizontal de rebordo utilizando fibrina rica em plaquetas associada à enxertos ósseos (sticky bone). Resultados: Após avaliação dos estudos encontrados foram selecionados 11 artigos sobre o uso do sticky bone para aumento horizontal de rebordo. Para compor este trabalho foram selecionados também 14 estudos de revisão e artigos associados ao tema. Por ser de fácil aplicação e obtenção, muitos autores têm estudado as aplicações cirúrgicas do sticky bone e os resultados demonstram que o aumento horizontal do rebordo utilizando essa técnica pode ser realizado de forma previsível. Conclusão: apesar de haver estudos promissores sobre o uso do sticky bone, falta evidência na literatura sobre seu sucesso clínico. Assim, para compreender o potencial regenerativo desta técnica são necessários um maior número de estudos randomizados, com diferentes materiais de enxerto e protocolos padronizados de obtenção do sticky bone.(AU)

Objective: to review the literature on the different types of autologous platelet derivatives and the clinical performance of using sticky bone for horizontal bone ridge augmentation. Materials and methods: In order to conduct this review, it was conducted searches in the PubMed, Google Scholar, and Web of Science databases using the following descriptors: "platelet-rich fibrin" AND "sticky bone" OR "alveolar bone grafting" AND "sticky bone" OR "guided bone regeneration" AND "sticky bone" AND "alveolar ridge augmentation" OR "Alveolar ridge augmentation" AND "sticky bone". It included articles published in English that addressed concepts related to platelet aggregates and guided bone regeneration for horizontal bone augmentation using platelet-rich fibrin associated with bone grafts (sticky bone). Results: After evaluating the studies found, were selected 11 articles on the use of sticky bone for horizontal ridge augmentation. To compose this work, 14 review studies and articles associated with the topic were also selected. Due to its ease of application and availability, many authors have explored the surgical applications of sticky bone, and the results indicate that horizontal ridge augmentation using this technique can be predictably performed. Conclusion: while there are promising studies on the use of sticky bone, the literature lacks evidence regarding its clinical success. Therefore, to fully understand the regenerative potential of this technique, further randomized studies are needed, involving different graft materials and standardized protocols for obtaining sticky bone.(AU)

Assuntos

RESUMO

AIM: To compare, at different levels from the alveolar crest, the radiographic outcomes of equine-derived collagenated xenogeneic bone blocks (CXBB) and autogenous bone blocks (ABB) used for lateral alveolar ridge augmentation. MATERIALS AND METHODS: Sixty-four patients with tooth gaps in atrophic alveolar ridges with ≤4 mm were randomly assigned to lateral augmentation using CXBB or ABB. The lateral bone thickness (LBT) was measured 2, 4, 6, 8, and 10 mm below the alveolar crest using CBCT scans obtained before augmentation surgery and at 30 weeks, prior to implant placement. Statistical analysis was performed using Shapiro-Wilk, Fisher's exact, Mann-Whitney, and Wilcoxon signed-rank tests. RESULTS: Both CXBB and ABB resulted in significant total and buccal LBT gains at 2, 4, 6, 8, and 10 mm. LBT gains were similar between CXBB- and ABB-augmented sites, except for greater buccal LBT gains at 8 mm at CXBB-augmented sites. While ABB-augmented sites gained vertical bone height, CXBB-treated sites suffered vertical bone loss (CXBB: -0.16 mm; ABB: 0.38 mm, p < .0009). CONCLUSIONS: CXBB and ABB were both associated with significant and similar LBT gains at 30 weeks.

Assuntos

RESUMO

Abstract The current literature on guided bone regeneration (GBR) and guided tissue regeneration (GTR) membrane contamination reports that the physicochemical characteristics of these biomaterials might influence affinity to bacteria, which appears to be a major drawback for the clinical outcome of the regenerative procedures. Thus, this study aimed to evaluate, in vitro, a multispecies biofilm adherence and passage of bacteria through different types of commercially available membranes for GTR/GBR. Four types of membranes were tested (n=12): LC) Lumina Coat®; JS) Jason®; BG) Biogide®; and LP) Lumina PTFE®. Aluminum foil (AL) simulated an impermeable barrier and was used as the control. The membranes were adapted to specific apparatus and challenged with a mixed bacterial culture composed of A. actinomycetemcomitans b, S. mutans, S. mitis, and A. israelii. After 2 h or 7 days, bacterial adhesion and passage of bacteria were evaluated through CFU counting, which was analyzed by two-way ANOVA e post hoc Tukey, at a 5% significance level. Representative areas of two membranes of each group were analyzed through scanning electron microscopy (SEM) to assess the morphology and organization of the biofilm over the membrane fibers. LC and LP presented similar values of adhered bacterial cells (p > 0.05), significantly inferior when compared to the other groups, in both time points (p < 0.05). All the tested groups were permeable to bacterial cells, with no significant difference between the trial period of 2 h and 7 days (p > 0.05). SEM analyses demonstrated that adhered bacteria number increased throughout the time points (2 h < 7 days). Commercially available biological membranes demonstrated intense bacterial adherence and passage of bacteria, which increased throughout the trial period.

Resumo O objetivo deste estudo foi avaliar, in vitro, a aderência do biofilme multiespécie e a passagem de bactérias através dos diferentes tipos de membranas disponíveis comercialmente para RTG/ROG. Quatro tipos de membranas foram testados (n=12): LC) Lumina Coat®; JS) Jason®; BG) Biogide®; e LP) Lumina PTFE®. Papel alumínio (AL) simulou uma barreira impermeável e foi usado como controle negativo. As membranas foram adaptadas à um aparato específico e desafiadas com uma cultura bacteriana mista composta de A. actinomycetemcomitans b, S. mutans, S. mitis, e A. israelii. Após 2 h ou 7 dias, a aderência e passagem bacteriana foi avaliada através da contagem de UFCs. Duas membranas de cada grupo foram analisadas através da microscopia eletrônica de varredura (MEV). LC e LP apresentaram valores semelhantes de células bacterianas aderidas (p < 0.05), significativamente inferiores quando comparados aos outros grupos, em ambos os períodos experimentais (p < 0.05). Desde a análise inicial, todos os grupos testados foram permeáveis às células bacterianas, sem diferença significativa entre o período experimental de 2 h e 7 dias (p > 0.05). As análises em MEV demonstraram que o número de bactérias aderidas aumentou com o tempo (2 h < 7 days). Membranas biológicas comercialmente disponíveis demonstraram intensa aderência bacteriana e passagem de bactérias, que aumentou durante os períodos experimentais.

RESUMO

Barrier membranes are critical in creating tissuecompartmentalization for guided tissue (GTR) and bone regeneration (GBR) therapies. More recently, resorbable membranes have been widely used for tissue and bone regeneration due to their improved properties and the dispensable re-entry surgery for membrane removal. However, in cases with membrane exposure, this may lead to microbial contamination that will compromise the integrity of the membrane, surrounding tissue, and bone regeneration, resulting in treatment failure. Although the microbial infection can negatively influence the clinical outcomes of regenerative therapy, such as GBR and GTR, there is a lack of clinical investigations in this field, especially concerning the microbial colonization of different types of membranes. Importantly, a deeper understanding of the mechanisms of biofilm growth and composition and pathogenesis on exposed membranes is still missing, explaining the mechanisms by which bone regeneration is reduced during membrane exposure. This scoping review comprehensively screened and discussed the current in vivo evidence and possible new perspectives on the microbial contamination of resorbable membranes. Results from eligible in vivo studies suggested that different bacterial species colonized exposed membranes according to their composition (collagen, expanded polytetrafluoroethylene (non-resorbable), and polylactic acid), but in all cases, it negatively affected the attachment level and amount of bone gain. However, limited models and techniques have evaluated the newly developed materials, and evidence is scarce. Finally, new approaches to enhance the antimicrobial effect should consider changing the membrane surface or incorporating long-term released antimicrobials in an effort to achieve better clinical success.

Assuntos

RESUMO

OBJECTIVE: Guided bone regeneration (GBR) is a technique that involves the placement of mechanical barriers to protect the blood clot, and create an isolated space to prevent competition from epithelial and connective tissues in bone augmentation treatments. Collagen membranes stand out from other materials available for performing regenerative surgeries, and are widely used because of their ability to promote cell adhesion and homeostasis, and their biocompatibility, ease of handling, and low immunogenicity. In this context, researchers have investigated xenogenic membranes/barriers that cost less and have slower resorption rates. The current study aimed to assess the osteogenic potential induced by a crosslinked, synthesized xenogenic membrane 100 µm thick when applied in vivo to critical defects in rat calvaria. MATERIAL AND METHODS: Critical size defects were created in the calvaria of thirty male Wistar rats, and randomly divided into the following two groups: G1 - clot covered with a commercial xenogenic membrane (Lumina-Coat®, Criteria, Brazil), and G2 - clot covered with a synthesized xenogenic membrane. The animals were euthanized after 7, 15 and 30 days, and samples of calvaria were processed to perform morphometric evaluations to measure bone neoformation in the defect region. In addition, ultrastructural characterization of the collagen membranes was performed by scanning electron microscope. The quantitative analyses were carried out by adopting a significance level of 5%. RESULTS: The ultrastructural characterization revealed that the synthesized membrane had thicker collagen fibers and a more cohesive surface, compared with the Lumina-Coat® collagen membrane (G1). There was no significant difference in bone neoformation between the membranes (p>0.05), at any of the time periods analyzed. The bone quantification area increased significantly over time for both membranes (p<0.05). CONCLUSION: The synthesized membrane exhibited morphological characteristics similar to those of the commercial membrane evaluated, allowed potentially active participation in the bone neoformation process, and served as a low-cost alternative for GBR procedures.

Assuntos

RESUMO

Os cistos residuais são definidos como cistos inflamatórios, revestidos por epitélio e em seu interior apresentam um conteúdo semifluido ou fluido, que em sua dominância ocorrem na maxila. Em geral não apresentam sintomas e se não tratado corretamente pode ocasionar uma reabsorção óssea e enfraquecimento da maxila ou mandíbula. O principal objetivo deste trabalho é relatar o caso de uma paciente do sexo feminino, que compareceu a Clinica Odontológica relatando um cisto na região dos incisivos centrais superiores. No exame clinico, notou-se um aumento de volume na porção vestibular do processo alveolar, sendo sua consistência macia e sintomatologia dolorosa a palpação. Portanto, optou-se por sua enucleação cirúrgica da lesão, seguida de uma minuciosa descontaminação mecanica e quimica, seguida de regeneração óssea guiada utilizando um enxerto ósseo sintético a base de fosfato de cálcio e hidroxiapatia sendo seu diagnóstico confirmado através de exame histopatológico. Contudo neste relato pode-se observar que a enucleação do cisto residual seguida por uma boa descontaminação mecanica e quimica, associado a regeneração óssea guiada se mostrou eficaz no tratamento deste caso, não ocorrendo recidivas no periodo de acompanhamento. PALAVRAS-CHAVE: Cistos Residuais; Cistos Odontogênicos; Biópsia; Regeneração Óssea Guiada; Enxerto Ósseo.

Residual cysts are defined as inflammatory cysts, covered by epithelium and in their interior they have a semi-fluid or fluid content, which in their dominance occur in the maxilla. In general, they do not have symptoms and if not treated correctly, it can cause bone resorption and weakening of the maxilla or mandible. The main objective of this work is to report the case of a female patient, who attended the Dental Clinic reporting a cyst in the region of the upper central incisors. On clinical examination, an increase in volume was noted in the vestibular portion of the alveolar process, with a soft consistency and painful symptoms on palpation. Therefore, we opted for its surgical enucleation of the lesion, followed by a thorough mechanical and chemical decontamination, followed by guided bone regeneration using a synthetic bone graft based on calcium phosphate and hydroxyapathy, the diagnosis being confirmed through histopathological examination. However, in this report, it can be seen that the enucleation of the residual cyst followed by good mechanical and chemical decontamination, associated with guided bone regeneration, proved to be effective in the treatment of this case, with no recurrences occurring during the follow-up period.

Los quistes residuales se definen como quistes inflamatorios, recubiertos por epitelio y en su interior tienen un contenido semilíquido o líquido, que en su predominio se presentan en el maxilar. Por lo general, no presentan síntomas y si no se tratan correctamente, pueden causar reabsorción ósea y debilitamiento del maxilar o la mandíbula. El objetivo principal de este trabajo es reportar el caso de una paciente de sexo femenino, que acudió a la Clínica Odontológica por presentar un quiste en la región de los incisivos centrales superiores. Al examen clínico se aprecia aumento de volumen en la porción vestibular del proceso alveolar, de consistencia blanda y sintomatología dolorosa a la palpación. Por ello, se optó por su enucleación quirúrgica de la lesión, seguida de una exhaustiva descontaminación mecánica y química, seguida de regeneración ósea guiada mediante injerto óseo sintético a base de fosfato cálcico e hidroxiapatía, confirmándose el diagnóstico mediante examen histopatológico. Sin embargo, en este reporte se puede ver que la enucleación del quiste residual seguida de una buena descontaminación mecánica y química, asociada a la regeneración ósea guiada, demostró ser eficaz en el tratamiento de este caso, sin que se presentaran recurrencias durante el seguimiento período de subida.

RESUMO

Se presentó a la Cátedra de Endodoncia de la Facultad de Odontología de la Universidad de Buenos Aires un paciente masculino de 62 años de edad que al examen clínico presentaba una fístula vestibular en la zona de la pieza 1.2 y dolor a la percusión. Al examen radiográ-fico se identificó una lesión apical extensa abarcando las piezas dentarias 1.2 y 1.1 endodónticamente trata-das con alteración severa de la anatomía del espacio endodóntico, así como la presencia de postes metáli-cos que no respetaban el eje del canal radicular. Ante el análisis tomográfico se observó una perforación de la pieza 1.2 y una lesión periapical extensa afectando ambas corticales (vestibular y palatina). Se decidió un abordaje microquirúrgico con técnicas de regenera-ción ósea guiada (ROG) y se realizaron los controles clínico-tomográficos a los 6, 12 y 24 meses. Por otro lado, se evaluó con micromografía de rayos X la ana-tomía de los ápices radiculares resecados. La lesión extirpada fue analizada histológicamente (AU)

A 62-year-old male patient attended the Endodontics department of the Buenos Aires University. He was examined clinically and a vestibular fistula in 1.2 area and pain under percussion were found. Radiographic examination identified an extended periapical lesion compromising teeth 1.2 and 1.1 with endodontic treatment severely altering the root canal anatomy, as well as metallic cast posts that did not preserve root canal axis. Regarding the tomographic analysis, a vestibular root perforation was observed (1.2), and both, vestibular and palatal corticals, were affected. We decided to perform a surgical approach with guided bone regeneration techniques (GBR). Clinical-CBCT controls were done at 6, 12 and 24 months. Furthermore, the anatomy of the resected root apex-es was evaluated with X ray microtomography. The removed lesion was histologically analyzed (AU)

Assuntos

RESUMO

The aim of this study was to evaluate the bone response to two different implant surfaces on sinus lift procedures in rabbits. Bilateral sinus lifting with inorganic bovine bone associated with collagen membrane and immediate implantation were performed in 16 rabbits. Custom mini-implants were randomly installed in the prepared sites: one side received a double acid-etched (DAE) surface and the other a nano-hydroxyapatite (NHA) surface. The animals were euthanized 30 and 60 days after surgery, and biopsies were collected for microtomographic and histomorphometric analysis. After 30 days, no intra- and inter-group statistical differences were observed in microtomographic analysis, while at 60 days, bone analysis showed statistically significant differences between groups (p < 0.05) for all the evaluated parameters. Histomorphometric analysis showed, after 30 days, mean % of Bone-to-Implant Contact (BIC) for DAE and NHA of 31.70 ± 10.42% vs. 40.60 ± 10.22% (p > 0.05), respectively; for % of Bone Area Fraction Occupancy (BAFO), mean values were 45.43 ± 3.597% for DAE and 57.04 ± 5.537% for NHA (p < 0.05). After 60 days, mean %BIC and %BAFO for DAE and NHA implants were statistically significant (p < 0.05). The NHA surface showed superior biological features compared to the DAE treatment, promoting higher bone formation around the implants in an experimental model of bone repair in a grafted area.

RESUMO

BACKGROUND: The vertical increase of the alveolar ridge dimension using allograft or xenograft mixed with autogenous bone graft and covered by a nonabsorbable high-density polytetrafluoroethylene (d-PTFE) membrane is well documented in the literature. PURPOSE: The aim of this study was to assess vital mineralized tissue formation in vertical ridge augmentation (VRA) procedures using autogenous bone chips mixed either with an allograft or a xenograft. METHODS: This prospective clinical trial recruited 16 partially edentulous patients to undergo vertical ridge augmentation in one or more sites, making up a total of 24 samples for histological evaluation. Patients were sequentially stratified into Group A (treated with a freeze-dried bone allograft [FDBA] mixed with autogenous bone) or to Group B (treated with a bovine xenograft mixed with autogenous bone). Histological samples were analyzed according to the biomaterial used for VRA. Histological samples were obtained on the same day of membrane removal and implant placement. RESULTS: Thirty-three implants were placed in 16 sites of regenerated bone via VRA, 13 patients with ridge augmentation in the posterior mandible, and 3 patients with VRA in the anterior maxilla. Group A (FDBA + autogenous) and Group B (xenograft + autogenous) showed a percent vital mineralized tissue (VMT) area of 67.64 ± 16.84 and 60.93 ± 18.25, respectively. A significant difference between the two biomaterials was not observed. CONCLUSION: When mixed with autogenous bone, either allografts or xenografts may provide a successful augmentation. Either mixture could serve as reliable alternative in VRA for obtaining a high percentage of VMT.

Assuntos

RESUMO

AIM: To compare the efficacy of equine-derived collagenated xenogeneic bone blocks (CXBB) and autogenous bone block (ABB) for lateral alveolar ridge augmentation and two-stage implant placement. MATERIALS AND METHODS: Sixty-four patients with tooth gaps up to four teeth and atrophic alveolar ridges with ≤4 mm were randomly assigned to lateral augmentation using CXBB or ABB. Lateral bone thickness (LBT) was measured 2 mm below the alveolar crest at augmentation surgery and 30 weeks later at implant placement. Implant-related outcomes, adverse events, surgery duration, pain sensation, analgesic consumption, and oral health-related quality of life were also assessed. Data were analysed using Fisher's exact, Mann-Whitney, and Wilcoxon signed-rank tests. RESULTS: At 30 weeks, the median change in LBT amounted to 2.90 (CXBB) and 3.00 (ABB), respectively. Secondary endpoints demonstrated similar results for CXBB and ABB in terms of possibility to place an implant, need to perform a secondary bone augmentation at implant placement and rate of complications. Early implant failure was 20% for CXBB and 10% for ABB, with no difference between the groups. Pain scores and post-operative consumption of analgesics were significantly lower in the CXBB group than in the ABB group, especially during the first days post-surgery. CONCLUSIONS: CXBB is non-inferior to ABB for horizontal alveolar ridge augmentation and two-stage implant placement.

Assuntos