RESUMO
This study aimed to evaluate the effects of the estrogen depression during orthodontic tooth movement on alveolar bone microarchitecture and periodontal ligament. Female Wistar rats were divided into two groups, one consisting of non-ovariectomized animals subjected to orthodontic tooth movement, and one comprising ovariectomized animals subjected to orthodontic tooth movement. Micro-CT assessment of bone volume to total volume (BV/TV), total porosity, trabecular thickness (Tb.Th), trabecular number (Tb.N), and trabecular separation (Tb.Sp) in the alveolar bone of the orthodontically moved tooth was performed. Histomorphometric analyses were made in the periodontal ligament, and immunoexpression of RANK, RANKL, OPG, and TUNEL were quantified. Orthodontic tooth movement in the group of ovariectomized rats was faster than in non-ovariectomized animals. The alveolar bone area showed lower values of BV/TV and trabecular thickness, and higher bone porosity and trabeculae numbers in the ovariectomized rats. Histological analyses in the ovariectomized group revealed an increase in collagen fibers in the periodontal ligament. The apoptotic cell counts in the periodontal ligament were higher in the group of ovariectomized rats than in the sham-operated rats. Ovariectomy resulted in an increase in tooth movement and alteration of the alveolar bone microstructure in the first 7 day of orthodontic tooth movement, and in the presence of apoptotic cells in the periodontal ligament.
Assuntos
Processo Alveolar , Estrogênios , Ovariectomia , Ligamento Periodontal , Ratos Wistar , Técnicas de Movimentação Dentária , Microtomografia por Raio-X , Animais , Ligamento Periodontal/patologia , Técnicas de Movimentação Dentária/efeitos adversos , Feminino , Processo Alveolar/patologia , Processo Alveolar/diagnóstico por imagem , Ratos , Apoptose , Ligante RANK/metabolismo , Osteoprotegerina/metabolismo , Receptor Ativador de Fator Nuclear kappa-B/metabolismo , Densidade Óssea , Marcação In Situ das Extremidades CortadasRESUMO
Bone defects and injuries are common, and better solutions are needed for improved regeneration and osseointegration. Bioresorbable membranes hold great potential in bone tissue engineering due to their high surface area and versatility. In this context, polymers such as poly(lactic-co-glycolic acid) (PLGA) can be combined with osteoconductive materials like hydroxyapatite (HA) nanoparticles (NPs) to create membranes with enhanced bioactivity and bone regeneration. Rotary Jet spinning (RJS) is a powerful technique to produce these composite membranes. This study presents an innovative and efficient method to obtain PLGA-HA(NPs) membranes with continuous fibers containing homogeneous HA(NPs) distribution. The membranes demonstrated stable thermal degradation, allowing HA(NPs) quantification. In addition, the PLGA-HA(NPs) presented osteoconductivity, were not cytotoxic, and had high cell adhesion when cultured with pre-osteoblastic cells. These findings demonstrate the potential of RJS to produce PLGA-HA(NPs) membranes for easy and effective application in bone regeneration.
RESUMO
This study investigated the antitumoral, anti-inflammatory and oxidative effects of polysaccharides from tucum (Bactris setosa, TUC) using the Ehrlich carcinoma as a tumor model. Additionally, the glycogen content, cytochrome P levels, and gluconeogenesis from lactate were assessed in the liver of healthy animals. Tumor-bearing female mice were orally treated with 50 and 100 mg.kg-1 of TUC or vehicle, once a day, or with 1.5 mg.kg-1 methotrexate via i.p., every 3 days, along 21 days. Both doses of TUC reduced the tumor weight and volume. In the tumor tissue, it decreased GSH and IL-1ß levels, and increased LPO, NAG, NO and TNF-α levels. The tumor histology showed necrosis and leukocytes infiltration. The metabolic effects of TUC were investigated by measurement of total cytochrome P (CYP) and glycogen in tumor-bearing mice, and by ex vivo liver perfusion on non-bearing tumor male mice, using lactate as gluconeogenic precursor. Metabolically, the hepatic glucose and pyruvate productions, oxygen uptake, and the total CYP concentration were not modified by TUC. Thus, tucum-do-cerrado polysaccharides have antitumor effects through the modulation of oxidative stress and inflammation, without impairing glucose production from lactate in the liver, the main organ responsible for the metabolism of organic and xenobiotic compounds.
Assuntos
Gluconeogênese , Fígado , Polissacarídeos , Animais , Polissacarídeos/farmacologia , Polissacarídeos/química , Camundongos , Fígado/efeitos dos fármacos , Fígado/metabolismo , Fígado/patologia , Gluconeogênese/efeitos dos fármacos , Feminino , Masculino , Antineoplásicos/farmacologia , Antineoplásicos/química , Estresse Oxidativo/efeitos dos fármacos , Frutas/química , Glicogênio/metabolismo , Carcinoma de Ehrlich/tratamento farmacológico , Carcinoma de Ehrlich/patologia , Carcinoma de Ehrlich/metabolismo , Extratos Vegetais/farmacologia , Extratos Vegetais/químicaRESUMO
A validation of the factorial, Taguchi and response surface methodology (RSM) statistical models is developed for the analysis of mechanical tests of hybrid materials, with an epoxy matrix reinforced with natural Chambira fiber and synthetic fibers of glass, carbon and Kevlar. These materials present variability in their properties, so for the validation of the models a research methodology with a quantitative approach based on the statistical process of the design of experiments (DOE) was adopted; for which the sampling is in relation to the design matrix using 90 treatments with three replicates for each of the study variables. The analysis of the models reveals that the greatest pressure is obtained by considering only the source elements that are significant; this is reflected in the increase in the coefficient of determination and in the predictive capacity. The modified factorial model is best suited for the research, since it has an R2 higher than 90% in almost all the evaluated mechanical properties of the material; with respect to the combined optimization of the variables, the model showed an overall contribution of 99.73% and global desirability of 0.7537. These results highlight the effectiveness of the modified factorial model in the analysis of hybrid materials.
RESUMO
Low-density green polyethylene (LDGPE) composites reinforced with 5 wt% of bamboo fiber and 3 wt% of a compatibilizing agent (polyethylene grafted with maleic anhydride and tannin) were processed through extrusion and injection molding. Bamboo fiber, Bambusa Vulgaris, was characterized using Fourier-transform infrared spectroscopy (FTIR). The molded specimens were analyzed for their thermal, mechanical, and morphological properties. The estimated concentration was chosen to provide the best mechanical strength to the material studied. FTIR analysis of the fibers revealed the presence of groups characteristic of bamboo fiber and tannin. Differential scanning calorimetry revealed that both compatibilizing agents increased the matrix's degree of crystallinity. However, scanning electron microscopy (SEM) showed that, despite the presence of compatibilizing agents, there was no significant improvement in adhesion between the bamboo fibers and LDGPE.
RESUMO
The development of bio-insultation materials has attracted increasing attention in building energy-saving fields. In tropical and hot-humid climates, building envelope insulation is important for an energy efficient and comfortable indoor environment. In this study, several experiments were carried out on a bio-insulation material, which was prepared by using rice husk as a raw material. Square rice husk-based insultation panels were developed, considering the ASTM C-177 dimensions, to perform thermal conductivity coefficient tests. The thermal conductivity coefficient obtained was 0.073 W/(m K), which is in the range of conventional thermal insulators. In a second phase of this study, two experimental enclosures (chambers) were constructed, one with rice husk-based insulation panels and the second one without this insulation. The measures of the temperatures and thermal flows through the chambers were obtained with an electronic module based on the ARDUINO platform. This module consisted of three DS18B20 temperature sensors and four Peltier plates. Daily temperature and heat flux data were collected for the two chambers during the dry season in Panama, specifically between April and May. In the experimental chamber that did not have rice husk panel insulation on the roof, a flow of up to 28.18 W/m2 was observed, while in the chamber that did have rice husk panels, the presence of a flow toward the interior was rarely observed. The rice husk-based insulation panels showed comparable performance with conventional insulators, as a sustainable solution that takes advantage of a local resource to improve thermal comfort and the reduction of the environmental impact.
RESUMO
Adenomyosis is associated with dysmenorrhea and chronic pelvic pain; however, the triggering mechanisms of painful stimuli and the role of uterine nerve fibers in the manifestation of pain remain poorly understood. The objective of this study was to systematically review the role of uterine nerve fibers' presence and density in the occurrence of pain in patients with adenomyosis. An electronic search was performed using the Embase, PubMed/Medline, and Cochrane databases. We included all studies from inception to November 2023. A total of ten studies that compared uterine biopsies samples of women with and without adenomyosis were included. The biomarker antiprotein gene product 9.5 was decreased or absent in the endometrium of most included women with adenomyosis. None of the included studies observed a difference in neurofilament (NF) staining between the adenomyosis and non-adenomyosis groups. Studies that assessed nerve growth factor (NGF) staining were heterogeneous in design. One study reported no difference in immunohistochemistry staining in any endometrial layer between the adenomyosis and non-adenomyosis groups, while another reported increased staining in the adenomyosis functional endometrial layer, and a third study reported overexpression of NGF, synaptophysin (SYN), and microtubule-associated protein 2 mRNA in focal adenomyosis alone. Preliminary data from poor-quality studies suggest an increase in the uterine density of nerve fibers in patients with adenomyosis. Well-designed studies are essential to assess the cause-and-effect relationship between uterine nerve fibers and pain in patients with adenomyosis.
Assuntos
Adenomiose , Útero , Humanos , Feminino , Adenomiose/metabolismo , Adenomiose/patologia , Adenomiose/complicações , Útero/inervação , Útero/patologia , Útero/metabolismo , Dor Pélvica/metabolismo , Dor Pélvica/etiologia , Dor Pélvica/patologia , Nervos Periféricos/patologia , Nervos Periféricos/metabolismo , Endométrio/inervação , Endométrio/metabolismo , Endométrio/patologia , Dismenorreia/metabolismoRESUMO
In recent years, there has been a growing interest in studying the Superficial White Matter (SWM). The SWM consists of short association fibers connecting near giry of the cortex, with a complex organization due to their close relationship with the cortical folding patterns. Therefore, their segmentation from dMRI tractography datasets requires dedicated methodologies to identify the main fiber bundle shape and deal with spurious fibers. This paper presents an enhanced short fiber bundle segmentation based on a SWM bundle atlas and the filtering of noisy fibers. The method was tuned and evaluated over HCP test-retest probabilistic tractography datasets (44 subjects). We propose four fiber bundle filters to remove spurious fibers. Furthermore, we include the identification of the main fiber fascicle to obtain well-defined fiber bundles. First, we identified four main bundle shapes in the SWM atlas, and performed a filter tuning in a subset of 28 subjects. The filter based on the Convex Hull provided the highest similarity between corresponding test-retest fiber bundles. Subsequently, we applied the best filter in the 16 remaining subjects for all atlas bundles, showing that filtered fiber bundles significantly improve test-retest reproducibility indices when removing between ten and twenty percent of the fibers. Additionally, we applied the bundle segmentation with and without filtering to the ABIDE-II database. The fiber bundle filtering allowed us to obtain a higher number of bundles with significant differences in fractional anisotropy, mean diffusivity, and radial diffusivity of Autism Spectrum Disorder patients relative to controls.
RESUMO
A plantain pseudostem was harvested and processed on the same day. The process began with manually separating the sheaths (80.85%) and the core (19.14%). The sheaths were subjected to a mechanical shredding process using paddles, extracting 2.20% of lignocellulosic fibers and 2.12% of sap, compared to the fresh weight of the sheaths. The fibers were washed, dried, combed, and spun in their native state and subjected to a steam explosion treatment, while the sap was subjected to filtration and evaporation. In the case of the core, it was subjected to manual cutting, drying, grinding, and sieving to separate 12.81% of the starch and 6.39% of the short lignocellulosic fibers, compared to the fresh weight of the core. The surface modification method using steam explosion succeeded in removing a low proportion of hemicellulose and lignin in the fibers coming from the shims, according to what was shown by Fourier Transform Infrared Spectroscopy (FT-IR), Thermogravimetric Analysis (TGA), and Differential Scanning Calorimetry (DSC), achieving increased σmax and ε from the tensile test and greater thermal stability compared to its native state. The sap presented hygroscopic behavior by FT-IR and the highest thermal stability from TGA, while the starch from the core presented the lowest hygroscopic character and thermal stability. Although the pseudostem supplied two types of fibers, lower lignin content was identified in those from the core. Finally, the yarns were elaborated by using the fibers of the sheaths in their native and steam-exploded states, identifying differences in the processing and their respective physical and mechanical properties.
RESUMO
Thermo-mechanical pulping produces well-individualized fibers compared to wood particles and less fragile fibers compared to Kraft pulping, besides presenting higher volume, higher yield, and lower production cost, which can be an exciting alternative for the fiber-cement industries. This study evaluated the impact of soak and dry-aging cycles on the performance of extruded composites reinforced with non-bleached eucalyptus fibers. The cement matrix comprised cement (70%) and limestone (30%). Composites were reinforced with 1 to 5% of eucalyptus fiber by cement mass and tested on the 28th day of cure at 99% relative humidity and after 400 accelerated aging cycles. The water absorption and apparent porosity gradually increased with the reinforcement level. Composites with 4 and 5% fibers showed the highest toughness (0.21 and 0.23 kJ/m2, respectively). The aging by 400 soak-dry cycles reduced the composites' water absorption and apparent porosity. The modulus of elasticity (MOE), rupture (MOR), and toughness increased, except for toughness for composites reinforced with 1 and 5% fibers, explained by the cementitious matrix's continuous hydration, fiber mineralization, and natural carbonation. In general, eucalyptus thermo-mechanical fibers were suitable for producing cementitious composites. Cementitious composites with 3% fibers presented a higher MOR, MOE, low water absorption, and apparent porosity after 400 accelerated aging cycles. In addition, the composites with 4% fibers also presented remarkable improvements in these properties. The aging cycles did not result in composites with less resistance, a positive fact for their application as tiles and materials for external use in civil construction.
Assuntos
Materiais de Construção , Eucalyptus , Eucalyptus/química , Porosidade , Teste de MateriaisRESUMO
BACKGROUND: Type 2 diabetes is a chronic, non-communicable disease with a substantial global impact, affecting a significant number of individuals. Its etiology is closely tied to imbalanced dietary practices and sedentary lifestyles. Conversely, increasing die-tary fiber (DF) intake has consistently demonstrated health benefits in numerous studies, including improvements in glycemic control and weight management. AIM: To investigate the efficacy of DF interventions in the management of type 2 diabetes mellitus (T2DM). METHODS: A systematic literature review was conducted to explore the association between DF intake and the management of T2DM. Following the inclusion and exclusion criteria, a total of 26 studies were included in this review. RESULTS: The main strategies implied to increased DF intake were: High DF diet plus acarbose (2 studies); DF supplements (14 studies); and high DF diets (10 studies). Overall, most studies indicated that increased DF intake resulted in im-provements in glycemic control and weight management in T2DM patients. CONCLUSION: DF represents a valuable strategy in the treatment of type 2 diabetes, improving health outcomes. DF intake offers the potential to improve quality of life and reduce complications and mortality associated with diabetes. Likewise, through supplements or enriched foods, DF contributes significantly to the control of several markers such as HbA1c, blood glucose, triglycerides, low-density lipoprotein, and body weight.
RESUMO
This study aimed to explore alternative substrates for growing forest species using eucalyptus bark. It evaluated the potential of extracted Eucalyptus globulus fiber bark as a substitute for commercial growing media such as coconut fiber, moss, peat, and compost pine. We determined the physicochemical parameters of the growing media, the germination rate, and the mean fresh and dry weights of seedlings. We used the Munoo-Liisa Vitality Index (MLVI) test to evaluate the phytotoxicity of the bark alone and when mixed with commercial substrates. Generally, the best mixture for seed growth was 75% extracted eucalyptus bark fiber and 25% commercial substrates. In particular, the 75E-25P (peat) mixture is a promising substitute for seedling growth of Pinus radiata, achieving up to 3-times higher MLVI than the control peat alone. For Quillaja saponaria, the best growth substrate was the 50E-50C (coconut fiber) mixture, which had the most significant MLVI values (127%). We added chitosan and alginate-encapsulated fulvic acid phytostimulants to improve the performance of the substrate mixtures. The fulvic acid, encapsulated or not, significantly improved MLVI values in Q. saponaria species and P. radiata in concentrations between 0.05 and 0.1% w/v. This study suggests that mixtures with higher levels of extracted fiber are suitable for growing forest species, thus promoting the application of circular economy principles in forestry.
RESUMO
The use of natural fibers in cementitious composites has been gaining prominence in engineering. The natural lignocellulosic fibers (NLFs) used in these composites have advantages such as reduced density, reduced fragmentation and concrete cracking, thus improving flexural performance and durability. Coconut-fiber is one of those natural fibers and its use presents technical, ecological, social and economic benefits, as it is improperly disposed of, representing a large waste of natural resources, in addition to causing environmental pollution.. Thus, composites reinforced with natural fibers are promising materials for the construction industry, as in addition to meeting the sustainability of buildings, there will also be a reduction in urban solid waste generated and gains for structures with the use of environmentally friendly materials that meet to active efforts and with greater durability. This work aims to evaluate the tensile behavior of green coconut-fibers subjected to different drying temperatures through chemical, thermal (TG/DSC), morphological, visual and mechanical analysis. Drying temperatures of 70 °C, 100 °C and 130 °C were analyzed and the results indicated that the drying temperature at 70 °C was satisfactory, providing fiber-reinforced composites with good tensile strength, combined with good ductility.
RESUMO
The use of castor oil in producing polyurethane resins has been identified as one of the most promising options for the industry. The piassava fibers waste generated by the industry on a large scale presents excellent properties as a reinforcing agent due to its high lignin content characterized by chemical tests and FTIR. Composite boards consisting of a higher content of mercerized piassava fibers (10 mm, 85 wt.%) reinforced polyurethane castor oil-based resin (prepolymer (PP) and polyol (OM)) exhibited excellent performance. Composites with these properties have strong potential for medium-density applications ranging from biomedical prosthetics to civil partition walls and insulation linings. Alkali treatment removed the superficial impurities of piassava fibers, activating polar groups, and physical characterization reported excellent performance for all composites. Among the composites, the CP3 sample (composite reinforced with piassava fibers (85 wt.% fibers; 1.2:1-PP:OM)) stood out with higher density and lower swelling and water absorption percentage than other composites. FTIR results indicated NCO traces after the resin cured in the PU3 (1.2:1-PP:OM), possibly contributing to the interaction with the fibers. DMA results reported relevant information about more flexibility to CP1 (composite reinforced with piassava fibers (85 wt.% fibers; 0.8:1-PP:OM)) and CP3 than CP2 (composite reinforced with piassava fibers (85 wt.% fibers; 1:1-PP:OM)). The results suggest that the proper combination with natural products must lead to composites with potential applications as engineering materials.
RESUMO
Trichomonas vaginalis is the etiologic agent of trichomoniasis, the most common nonviral sexually transmitted infection worldwide, with an estimated 260 million new cases annually. T. vaginalis contains organelles common to all eukaryotic cells, uncommon cell structures such as hydrogenosomes, and a complex and elaborate cytoskeleton constituting the mastigont system. The mastigont system is mainly formed by several proteinaceous structures associated with basal bodies, the pelta-axostylar complex made of microtubules, and striated filaments named the costa and the parabasal filaments (PFs). Although the structural organization of trichomonad cytoskeletons has been analyzed using several techniques, observation using a new generation of scanning electron microscopes with a resolution exceeding 1 nm has allowed more detailed visualization of the three-dimensional organization of the mastigont system. In this study, we have investigated the cytoskeleton of T. vaginalis using a diverse range of scanning probe microscopy techniques, which were complemented by electron tomography and Fast-Fourier methods. This multi-modal approach has allowed us to characterize an unknown parabasal filament and reveal the ultrastructure of other striated fibers that have not been published before. Here, we show the differences in origin, striation pattern, size, localization, and additional details of the PFs, thus improving the knowledge of the cell biology of this parasite.
RESUMO
Bipolar plates (BPs) are one of the most important components of polymer electrolyte membrane fuel cells (PEMFCs) because of their important role in gas and water management, electrical performance, and mechanical stability. Therefore, promising materials for use as BPs should meet several technical targets established by the United States Department of Energy (DOE). Thus far, in the literature, many materials have been reported for possible applications in BPs. Of these, polymer composites reinforced with carbon allotropes are one of the most prominent. Therefore, in this review article, we present the progress and critical analysis on the use of carbon material-reinforced polymer composites as BPs materials in PEMFCs. Based on this review, it is observed that numerous polymer composites reinforced with carbon allotropes have been produced in the literature, and most of the composites synthesized and characterized for their possible application in BPs meet the DOE requirements. However, these composites can still be improved before their use for BPs in PEMFCs.
RESUMO
BACKGROUND AND OBJECTIVES: The association of ALL and KF injuries in anterior cruciate ligament (ACL)-deficient knees remain topics of conflicting research despite improved magnetic resonance imaging (MRI). We aimed to evaluate the rate of the anterolateral ligament (ALL) and Kaplan fibers (KF) injuries in adults with acute ACL injuries using MRI. METHODS: We retrospectively reviewed 64 patients with clinical and MRI diagnoses of acute ACL tears. Two radiologists analyzed and categorized the status of the ALL and KF in all patients as intact, partially injured, or completely injured. Interobserver agreement was assessed. Injuries to the collateral ligaments, ITB and posterior cruciate ligament (PCL) were also evaluated. RESULTS: The mean age of the patients was 33 years. ALL injuries were observed in 46 (71%) patients, among whom 33 (71%) had partial and 13 (28%) had complete injuries. KF injuries were identified in 32 (50%) patients, with 28 (87.5%) of them having partial and 4 (12.5%) having complete injuries. Combined injuries of both ALL and KF were found in 25 (32.4%) patients (p-value of 0.266). The agreement between the examiners ranged from moderate to substantial (Kappa between 0.55 and 0.75), with the highest agreement observed in cases of KF injuries (Kappa = 0.75). CONCLUSIONS: ALL and KF injuries were prevalent in acute ACL-injured knees with rates of injury of 71% and 50%, respectively. ALL injuries were more frequent and more frequently severe compared to KF injuries.
RESUMO
The abundance of microplastics (MPs) in the gastrointestinal tract (GT), gills (GI), and exoskeleton (EX) of Litopenaeus vannamei shrimp cultured in a commercial indoor super-intensive controlled (ISCO) system was investigated. Shrimp of 25 days (postlarvae; PL25), and one, three, five, and seven culture months were analyzed. The postlarvae PL25 MP abundance per individual and gram of PL (wet weight) was 0.2 ± 0.0 MPs and 3.5 ± 0.5 MPs/g. For L. vannamei juveniles at one, three, five, and seven culture months, the MP abundance per juvenile shrimp was 10.0 ± 0.3, 27.2 ± 1.6, 32.3 ± 3.1, and 40.3 ± 3.6 MPs/individual, respectively (expressed in MPs/g of tissue were 1.6 ± 0.1, 2.0 ± 0.2, 2.0 ± 0.3 and 1.5 ± 0.2, respectively). Fibers were the most common MP type in all shrimp age classes (42.1-68.7 %), and the predominant color was transparent (46.1-65.0 %). The MP size in all shrimp stages ranged between 15 and 4686 µm. In general, the predominant polymers identified were PE (37.4 %), NY (21.1 %), and PET (18.5 %). The MP variability through the culture cycle showed that as the age of shrimp increased, and the culture advanced the MP abundance and size also augmented. Conversely, there is a higher MP abundance in L. vannamei cultured in ISCO systems compared to shrimp cultured in traditional semi-intensive and intensive ponds and those from wild environments. The latter is probably due to the extensive use of plasticized materials (geomembrane and greenhouse installations) and their degradation, which cause a greater MP exposure to shrimp. The estimated oral MP intake by ISCO shrimp consumption was 647 MPs/capita/year, which can be 178 % more than from wild shrimp.
Assuntos
Microplásticos , Penaeidae , Animais , Plásticos , Aquicultura , Alimentos MarinhosRESUMO
α-Fe2O3 and FeMnO3/α-Fe2O3 fibers were successfully prepared via Solution Blow Spinning (SBS). The effect of drying during the SBS process on fiber morphology was evaluated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N2 adsorption-desorption isotherms. A slow drying promoted continuous fibers with rough surfaces and lower average diameters. However, fast drying enabled the production of fibers with low densification and many surface pores with higher BET-specific surface areas. The porous fibers produced have potential applications in energy generation and storage.
RESUMO
A completely biobased composite material was developed using a matrix of natural resin extracted from the Elaegia pastoensis Mora plant, commonly known as Mopa-Mopa or "Barniz de Pasto", reinforced with fibers extracted from plantain rachis agricultural residues. A solvent process, involving grinding, distillation, filtration, and drying stages, was implemented to extract the resin from the plant bud. To obtain the resin from the plant bud, the vegetable material was ground and then dissolved in a water-alcohol blend, followed by distillation, filtration, and grinding until the powdered resin was ready for use in the preparation of the biocomposite. Likewise, using mechanical techniques, the plantain rachis fibers were extracted and worked in their native condition and with a previous alkalinization surface treatment. Finally, the biocomposite material was developed with and without incorporating stearic acid, which was included to reduce the material's moisture absorption. Ultimately stearic acid was used as an additive to reduce biocomposite moisture absorption. The tensile mechanical results showed that the Mopa-Mopa resin reached a maximum strength of 20 MPa, which decreased with the incorporation of the additive to 12 MPa, indicating its plasticization effect. Likewise, slight decreases in moisture absorption were also evidenced with the incorporation of stearic acid. With the inclusion of rachis plantain fibers in their native state, a reduction in the tensile mechanical properties was found, proportional to the amount added. On the other hand, with the alkalinization treatment of the fibers, the behavior was the opposite, evidencing increases in tensile strength, indicating that the fiber modification improved the interfacial adhesion with the Mopa-Mopa matrix. On the other hand, the evaluation of the moisture absorption of the biocomposite material evidenced, as expected, that the absorption level was favored by the relative humidity used in the conditioning (47, 77, and 97%), which also had an impact on the decrease of the mechanical tensile properties, being this was slightly counteracted by the inclusion of stearic acid in the formulation of the material.