RESUMO

A high prevalence of post-treatment apical periodontitis associated to variables such as endodontic treatment quality and missed canals has been reported. AIM: The aim of this study was to evalúate the quality of endodontic treatment and the frequency of missed canals associated with teeth with apicalperiodontitis (AP) through CBCTin a Colombian sub-population. MATERIAL AND METHOD: This was a cross-sectional study assessing 318 cone beam computed tomography (CBCT) scans of endodontically treated teeth from Colombian individuals. The scans were taken using J Morita X550 (J Morita Corporation, Osaka, Japan), with voxel size 0.125 to 0.20 mm. All endodontically treated teeth were assessed for quality of treatment, presence of missed canals and AP. Allsamples were analyzed bytwo endodontics specialists and an radiology specialist. Chi-square or Fisher 's test and odds ratio were calculated to identify the association and risk relationship between the presence of AP and the study variables. RESULTS: Missed canals were found in 18.61% (86/462), and 95.3% were associated with AP. The frequency of AP was 62.34% (288/462) for all the evaluated teeth. AP was found in 27.43 % (79/288) of the teeth with adequate endodontic treatment, in contrast to 72.57% (209/288) of the teeth with inadequate treatment (P<0.01). The frequency of missed canals was highest in maxillary molars, with 55.23% (58/105), with 96.55% presenting AP. The second mesiobuccal canal wasthe most frequently missed canal, 88.52%o(54/61), with AP in 90.74% (49/54) of the cases. CONCLUSIÓN: There was a high frequency of teeth with missed canals and PA. More than half of the teeth with missed canals were maxillary molars, with MB2 being the most common canal, commonly presenting apical periodontitis.

Uma alta prevalência de periodontite apical pós-tratamento associada a variáveis como qualidade do tratamento endodôntico e fracasso do tratamento é relatada na literatura. O objetivo deste estudo foi avaliar a qualidade do tratamento endodôntico e a frequência e fracasso do tratamento associados a dentes com periodontite apical (PA) por meio de tomografia computadorizada de feixe cônico (TCFC) em uma subpopulação colombiana. MATERIAL E MÉTODO: Este foi um estudo transversal que avaliou 318 tomografias computadorizadas de dentes tratados endodonticamente de indivíduos colombianos. Os exames foram realizados utilizando o tomógrafo J Morita X550, com tamanho de voxel de 0,125 a 0,20 mm. Todos os dentes tratados endodonticamente foram avaliados quanto à qualidade do tratamento, presença de canais não localizados e AP. Todas as amostras foram avaliadas por dois especialistas em endodontia e um especialista em radiologia. Foram calculados o teste qui-quadrado ou de Fisher e a razão de chances para identificar associação e relação de risco entre a presença de PA e as variáveis do estudo. RESULTADOS: Foram encontrados canais não localizados em 18,61% (86/462) e 95,3% estavam associados à PA. A frequência de AP foi de 62,34% (288/462) para todos os dentes avaliados. AP foi encontrada em 27,43% (79/288) dos dentes com tratamento endodôntico adequado, em contraste com 72,57% (209/288) dos dentes com tratamento inadequado (P<0,01). A frequência de canais não localizados foi maior nos molares superiores, com 55,23% (58/105), sendo que 96,55% apresentavam PA. O canal mésio-palatino (MB2) apresentou maior frequência de canal não localizado (88,52% - 54/61), com PA em 90,74% (49/54) dos casos. CONCLUSÃO: Houve alta frequência de dentes com canais não localizados e com PA. Mais da metade dos dentes com canais não localizados eram molares superiores, sendo o MB2 é o canal com a maior frequência, comumente apresentando periodontite apical.

Assuntos

RESUMO

PURPOSE: The study aims to investigate the influence of the ferrule effect and types of posts on the stress distribution in three morphological types of the maxillary central incisor. MATERIALS AND METHODS: Nine models were created for 3 maxillary central incisor morphology types: "Fat" type - crown 12.5 mm, root 13 mm, and buccolingual cervical diameter 7.5 mm, "Medium" type - crown 11 mm, root 14 mm, and buccolingual cervical diameter 6.5 mm, and "Slim" type - crown 9.5 mm, root 15 mm, and buccolingual cervical diameter 5.5 mm. Each model received an anatomical castable post-and-core or glass-fiber post with resin composite core and three ferrule heights (nonexistent, 1 mm, and 2 mm). Then, a load of 14 N was applied at the cingulum with a 45° slope to the long axis of the tooth. The Maximum Principal Stress and the Minimum Principal Stress were calculated in the root dentin, crown, and core. RESULTS: Higher tensile and compression stress values were observed in root dentin using the metallic post compared to the fiber post, being higher in the slim type maxillary central incisor than in the medium and fat types. Concerning the three anatomical types of maxillary central incisors, the slim type without ferrule height in mm presented the highest tensile stress in the dentin, for both types of metal and fiber posts. CONCLUSION: Post system and tooth morphology were able to modify the biomechanical response of restored endodontically-treated incisors, showing the importance of personalized dental treatment for each case.

RESUMO

ABSTRACT A high prevalence of post-treatment apical periodontitis associated to variables such as endodontic treatment quality and missed canals has been reported. Aim The aim of this study was to evaluate the quality of endodontic treatment and the frequency of missed canals associated with teeth with apical periodontitis (AP) through CBCT in a Colombian sub-population. Material and Method This was a crosssectional study assessing 318 cone beam computed tomography (CBCT) scans of endodontically treated teeth from Colombian individuals. The scans were taken using J Morita X550 (J Morita Corporation, Osaka, Japan), with voxel size 0.125 to 0.20 mm. All endodontically treated teeth were assessed for quality of treatment, presence of missed canals and AP. All samples were analyzed by two endodontics specialists and an radiology specialist. Chi-square or Fisher's test and odds ratio were calculated to identify the association and risk relationship between the presence of AP and the study variables. Results Missed canals were found in 18.61% (86/462), and 95.3% were associated with AP. The frequency of AP was 62.34% (288/462) for all the evaluated teeth. AP was found in 27.43 % (79/288) of the teeth with adequate endodontic treatment, in contrast to 72.57% (209/288) of the teeth with inadequate treatment (P<0.01). The frequency of missed canals was highest in maxillary molars, with 55.23% (58/105), with 96.55% presenting AP. The second mesiobuccal canal was the most frequently missed canal, 88.52% (54/61), with AP in 90.74% (49/54) of the cases. Conclusion There was a high frequency of teeth with missed canals and PA. More than half of the teeth with missed canals were maxillary molars, with MB2 being the most common canal, commonly presenting apical periodontitis.

RESUMO Uma alta prevalência de periodontite apical pós-tratamento associada a variáveis como qualidade do tratamento endodôntico e fracasso do tratamento é relatada na literatura. O objetivo deste estudo foi avaliar a qualidade do tratamento endodôntico e a frequência e fracasso do tratamento associados a dentes com periodontite apical (PA) por meio de tomografia computadorizada de feixe cônico (TCFC) em uma subpopulação colombiana. Material e Método Este foi um estudo transversal que avaliou 318 tomografias computadorizadas de dentes tratados endodonticamente de indivíduos colombianos. Os exames foram realizados utilizando o tomógrafo J Morita X550, com tamanho de voxel de 0,125 a 0,20 mm. Todos os dentes tratados endodonticamente foram avaliados quanto à qualidade do tratamento, presença de canais não localizados e AP. Todas as amostras foram avaliadas por dois especialistas em endodontia e um especialista em radiologia. Foram calculados o teste qui-quadrado ou de Fisher e a razão de chances para identificar associação e relação de risco entre a presença de PA e as variáveis do estudo. Resultados Foram encontrados canais não localizados em 18,61% (86/462) e 95,3% estavam associados à PA. A frequência de AP foi de 62,34% (288/462) para todos os dentes avaliados. AP foi encontrada em 27,43% (79/288) dos dentes com tratamento endodôntico adequado, em contraste com 72,57% (209/288) dos dentes com tratamento inadequado (P<0,01). A frequência de canais não localizados foi maior nos molares superiores, com 55,23% (58/105), sendo que 96,55% apresentavam PA. O canal mésio-palatino (MB2) apresentou maior frequência de canal não localizado (88,52% - 54/61), com PA em 90,74% (49/54) dos casos. Conclusão Houve alta frequência de dentes com canais não localizados e com PA. Mais da metade dos dentes com canais não localizados eram molares superiores, sendo o MB2 é o canal com a maior frequência, comumente apresentando periodontite apical.

RESUMO

OBJECTIVE: To assess and compare, through a systematic review of the literature, the biomechanical performance of endocrowns and traditional core-crowns (with and without intracanal post) for the rehabilitation of endodontically treated teeth with severe coronal structure damage. MATERIALS AND METHODS: A systematic search was performed in MEDLINE/PubMed, Scopus, and Web of Science databases. In-vitro studies comparing endocrowns with (post-)core-crown restorations were selected and screened by two independent reviewers. The included studies were submitted to the risk of bias analysis using the RoBDEMAT tool and the biomechanical outcomes were collected for qualitative analysis. The extracted data were presented based on comparative analyses among the included studies. RESULTS: Thirty-one studies were included: 9 studies evaluated restorations of molars, 14 for premolars, and 8 studies evaluated anterior restorations. For the majority of the studies, endocrowns showed either similar or greater survival rates under fatigue and monotonic load than (post-)core-crown restorations, irrespectively of the tooth. The endocrowns showed more favorable failure patterns than (post-)core-crowns, irrespectively of the tooth. Endocrowns produced lower stresses in the restorative material for molars and premolars and in the luting material for premolars than (post-)core-crown restorations. The included studies presented adequate information for most items of the RoBDEMAT risk of bias tool. CONCLUSION: Endocrowns showed similar or greater biomechanical performance than the traditional (post-)core-crown restorations in most of the evaluated studies. CLINICAL SIGNIFICANCE: This systematic review showed that endocrowns present either similar or greater biomechanical performance than core-crown restorations for anterior and posterior endodontically treated teeth with severe structural damage.

Assuntos

RESUMO

Recent formulations of resin-based composites have incorporated different combinations of materials. However, the mechanical and bonding behavior of these materials with intraradicular posts are unclear. This study aimed to evaluate the effect of light-cure and dual-cure resin composite posts on the fracture resistance of endodontically-treated teeth. Materials and Methods: Ninety extracted human upper canines were selected and randomly divided into nine groups (n=10): (G1) endodontically treated teeth without endodontic posts; (G2) glass-fiber post cemented with glass-ionomer cement; (G3) endodontic post by dual-cure composite resin (Rebilda DC); (G4) endodontic post by dual-cure composite resin (Cosmecore); (G5) endodontic post by dual-cure composite resin (Bis-Core); (G6) endodontic post by light-cure composite resin; (G7) glass-fiber post customized with flowable composite resin; (G8) glass-fiber post cemented with light-cure composite resin; (G9) glass-fiber post cemented with self-adhesive resin cement. After the post insertion, all specimens were subjected to mechanical (250,000 cycles) and thermocycling (6000 cycles, 5 °C/55 °C) and immediate loading at 45 degrees in a universal testing machine until fracture. The data were analyzed by one-way ANOVA and multiple comparisons using the Fisher LSD Method (p < 0 05). Results: The mean failure loads (±SD) for the groups ranged from 100.7 ± 22.6 N to 221.9 ± 48.9 N. The G1 group (without endodontic posts) had a higher fracture strength than all experimental groups (p < 0.001). Conclusions: Within the limitations, the light- and dual-cure post technique did not present lower fracture resistance values as compared to the conventional glass-fiber post.

RESUMO

OBJETIVE: This study evaluated the influence of alveolar bone height and post type on compressive force resistance, fracture pattern, and stress distribution in endodontically treated teeth. MATERIALS AND METHODS: Bovine roots were endodontically treated and divided into eight groups (n = 10) according to alveolar bone height (normal alveolar bone and alveolar bone loss - 2 and 5 mm from the margin of the crown, respectively) and post type (prefabricated glass fiber post, anatomic glass fiber post, customized milled glass fiber post-and-core and customized milled polyetheretherketone (PEEK) post-and-core). Mechanical fatigue was simulated (300.000 cycles/50 N/1.2 Hz). Compression force resistance (N) was analyzed by two-way ANOVA and Tukey test (α = 0.05). Fracture patterns were described as percentages. Stress distribution was analyzed by finite element analysis. RESULTS: Significant diferences were found for alveolar bone height (P < 0.0001): normal alveolar bone groups showed higher mean values of compression force resistance compared to alveolar bone loss groups, while no significant differences were found for post type (P = 0.4551), and there was no double interaction between them (P = 0.5837). Reparable fractures were more predominant in normal alveolar bone groups, especially in the milled glass fiber and PEEK post-and-core groups. Stress distribution was similar in groups with prefabricated glass fiber posts and milled PEEK posts-and-cores, and the alveolar bone loss condition significantly increased stress concentration and strain values, mainly on apical dentin. CONCLUSIONS: Alveolar bone loss due to physiological aging and/or periodontal disease may lead to increased risk of restored tooth failure, although milled glass fiber and PEEK posts-and-cores provide more reparable fractures. CLINICAL SIGNIFICANCE: Custom-made glass fiber and PEEK post-and-cores are interesting options, since they enable clinicians to work with a single-body post-and-core system that avoid several materials interfaces and fits well in the root canal provided promising results to improve the failure behavior of restored roots, as they offer more reparable fractures even in situations of alveolar bone loss.

Assuntos

RESUMO

Abstract Objective The use of a fiber glass post (FGP) type and choice of FGP diameter to restore endodontically treated incisors without ferrule is controversial. This study evaluated survival rate and failure mode of severely compromised central incisors without ferrule rehabilitated using resin-based composite (RBC) with or without FGP with different diameters. Methodology A total of 60 decoronated bovine incisors without a ferrule were endodontically treated and prepared for 1.4, 1.6, and 1.8 mm diameter FGPs (Whitepost System DC 0.5, Fit 0.4, and DCE 0.5; FGM). Half of the teeth received FGPs cemented using dual-cure resin cement (Allcem Core; FGM), the other half were filled using only bulk-fill RBC (OPUS Bulk Fill; FGM). The crowns were directly restored with RBC. The roots were embedded in polystyrene resin and the periodontal ligament was simulated with polyether impression material. Fatigue testing was conducted under 5 Hz cyclic loading at 30 degrees to the incisal edge, beginning at 50 N (5,000 cycles) as a warmup. After, the load was increased 100 N every 15,000 cycles until fracture occurred. All specimens were subjected to transillumination, micro-CT analysis, and digital radiography before and after fatigue testing. Fracture mode was classified according to severity and repair potential. Data were analyzed with Kaplan-Meier survival test and post hoc log-rank test (α=0.05) for pairwise comparisons. Results Using FGP significantly increased the number of cycles to failure, irrespective of FGP diameters (p=0.001). The FGP diameters had no statistically significant effect on cycles to failure or failure mode. Conclusion Using FGP without ferrule improved survival rate of structurally severely compromised central incisors compared with rehabilitation without FGP. The diameter of the FGPs had no effect on the survival rate and failure mode.

RESUMO

AIM: To evaluate in vitro the whiteness index (WID) and the whiteness index variation (ΔWID), as well as the color stability of stained endodontically treated teeth after bleaching with violet LED (VL) and with hydrogen peroxide 35% (HP) associated or not to VL. METHODS: Twenty-four lower incisors were selected. The color was measured using a spectrophotometer at the following times: baseline, after staining, bleaching, and thermocycling, to determine the whiteness index and variation (WID and ΔWID). For the staining process, the teeth were immersed in human blood and centrifuged. After biomechanical preparation, the specimens were distributed into three groups (n = 8): control group (HP); violet LED (VL); and HP 35% + VL (HP+VL), and one session was performed for both bleaching procedures every week for three weeks, followed by thermocycling, where 10,000 cycles were performed. After color analysis, the data obtained were submitted to statistical analysis (RM ANOVA, p < 0,05). RESULTS: The staining of the teeth reduced the WID values for all experimental groups compared to baseline, and the bleaching protocols increased WID values, with the lowest WID values for group VL. There was no statistically significant difference after thermocycling for all groups compared to bleaching. Staining and thermocycling reduced the ΔWID values, and no difference was found between treatments at these assessment times. Bleaching increased the ΔWID values, with less pronounced changes in the VL group. CONCLUSION: VL used alone has a lower bleaching effect compared to the bleaching treatment with HP, whether or not associated with VL, and the color stability was observed for all groups.

Assuntos

RESUMO

Este estudo avaliou o efeito da ausência das paredes axiais residuais e/ou faces livres da estrutura coronária remanescente no comportamento biomecânico e em fadiga de incisivos centrais tratados endodonticamente com coroas totais e férula de 2 mm. Raízes de incisivos bovinos foram distribuídas em 4 grupos de n = 10: Férula completa de 2 mm (FER-2), remanescente com altura de 2 mm nas paredes vestibular e palatino (FER-VP); remanescente com altura de 2 mm nas paredes mesial e distal (FER-MD) ; ausência de férula (FER-0), associados ao fator ausência de pino. Os grupos foram submetidos ao ensaio de fadiga stepwise stress (50.000 ciclos/degrau; 5 Hz; carga=200N a 980N; degrau=40N, até a fratura). O carregamento foi feito por um aplicador em aço inoxidável com ponta arredondada, a 2 mm acima do cíngulo em um ângulo de 30°. Em um software de análise por elementos finitos (FEA), as distribuições de tensões foram avaliadas pelo o critério de Tensão Máxima Principal seguindo os mesmos parâmetros do ensaio in vitro, porém, associando os fatores experimentais a ausência e presença de pino, no qual os materiais foram considerados homogêneos, linearmente elásticos e isotrópicos, exceto os pinos de fibra de vidro, que foram considerados ortotrópicos e após o teste de convergência de malhas em 10%, obteve uma média de 72.719 elementos tetraedros e 128.756 nós. Para a fadiga, carga e o degrau da falha foram analisados pela estatística de Kaplan-Meier e Mantel-Cox (Log Rank test) (α=5%). Os dados de sobrevivência em função do carregamento oblíquo detectaram diferenças estatísticas entre as condições analisadas (Mantel-Cox LogRank test for trend, X2=0,015, df=1, p=0,901), no qual, 100% das amostras sobreviveram ao carregamento até 200N. O modo de falha predominante foi fratura não restaurável 1/3 radicular. Os resultados de FEA demonstraram que não houve diferença significativa entre os grupos com e ausência de pinos, sendo possível verificar que realizar restaurações intrarradiculares sem pino em raízes não fragilizadas, com no mínimo 2 mm de altura e 1 mm de espessura de férula parcial ou total é uma boa opção de tratamento. (AU)

This study was divided in two part, in vitro and in silic, with the purpose to evaluate the effect of the absence of residual axial walls and/or free faces of the remaining coronary structure on the biomechanical behavior and fatigue of endodontically treated central incisors with total crowns. Forty roots of bovine incisors was be distributed in 4 groups (n = 10): complete ferrule of 2 mm (FER2): remaining 2 mm high in the buccal and lingual walls (FER-VP); remaining 2 mm high in the mesial and distal walls (FER-MD); absence of ferrule (FER-0), all without post. The groups will be submitted to the stepwise stress fatigue test (172,000 cycles / step; 4 Hz; load = 200N to 450N; step = 50N, until the fracture). The load will be applied 2 mm above the cingulum (30 °) with a rounded steel tip. In silico test, the stress distributions was evaluated by the Maximum Principal Stress criterion following the parameters and groups of the in vitro test, and adding posts. The materials were considered homogeneous, linearly elastic and isotropic, except for the fiberglass posts, which were considered orthotropic. After the mesh convergence test at 10%, it obtained an average of 72,719 tetrahedral elements and 128,756 nodes. For fatigue, load and the failure step will be analyzed by the Kaplan-Meier and Mantel-Cox (Log Rank test) (α = 5%). The survival data as a function of oblique loading detected statistical differences between the conditions analyzed (Mantel-Cox Log-Rank test for trend, X2=0,015, df=1, p=0,901), in which 100% of the samples survived loading up to 200N. The predominant failure mode was a non-repairable 1/3 root fracture. The FEA results showed that was no significant difference betwen the groups with and without posts. It was possible to verify that intrarradicular restorations without post on non fragile roots with at least 2mm in height and 1mm of partial or total ferrule thickness is a good treatment option (AU)

Assuntos

RESUMO

A longevidade de dentes tratados endodonticamente é um assunto amplamente discutido no campo de atuação da odontologia restauradora e envolve questões que vão além do alcance da endodontia. Não são raras as situações em que um dente reabilitado após a terapia endodôntica apresenta fratura corono- radicular, podendo comprometer sua viabilidade. Considerando o custo biológico envolvido na perda dentária, ou o custo material empregado para que os tratamentos sejam refeitos, é importante que os cirurgiões dentistas estejam capacitados a traçar o adequado plano de tratamento. O planejamento restaurador representa divergências de opinião, tanto na prática clínica quanto em âmbito científico, considerando-se as variáveis envolvidas como perda estrutural, ausências dentárias, posicionamento do dente no arco, número e localização das cúspides perdidas, presença ou não de retentor intra-radicular, representam papel importante na longevidade do tratamento restaurador e devem ser individualmente analisadas. Diante do cenário descrito, o objetivo deste estudo foi avaliar os fatores relacionados à fratura de dentes tratados endodonticamente. Através dessa revisão da literatura, conclui-se que a variável estrutural, relacionada à sua função mastigatória é a principal responsável no prognóstico dos dentes tratados endodonticamente. Por este motivo deve ser prioritariamente considerada ao se eleger o procedimento restaurador. É de extrema importância que a comunidade de cirurgiões dentistas disponha de conhecimento técnico e científico atual para pautar suas escolhas na prática clínica, embasando a análise individual do planejamento restaurador dos dentes tratados endodonticamente.

The longevity of endodontically treated teeth is a widely discussed subject in the field of restorative dentistry and it has issues that go beyond the scope of endodontics. It is not uncommon for a tooth rehabilitated to present a crown-root fracture, which may compromise its viability, after endodontic therapy. Considering the biological cost involved in tooth loss, or the material cost used for treatments to be redone, it is important that dental surgeons are able to draw up the appropriate treatment plan. Restorative planning still represents differences of opinion, both in clinical practice and in the scientific field, considering the variables involved such as structural loss, dental absences, tooth positioning in the arch, number and location of lost cusps, presence or not of intraretainer. -radicular, among countless other clinical variables, play an important role in the longevity of the restorative treatment and must be individually analyzed. The aim of this study was to evaluate the factors related to the fracture of endodontically treated teeth. Through this literature review, we concluded that the structural variable, related to its masticatory function, is the main responsible for the prognosis of endodontically treated teeth. For this reason, it should be considered as a priority when choosing the restorative procedure. It is extremely important that the community of dental surgeons have current technical/scientific knowledge to guide their choices in clinical practice, basing the individual analysis of the restorative planning of endodontically treated teeth.

Assuntos

RESUMO

The loss of dental structure caused by endodontic treatment is responsible for a decrease in tooth resistance, which increases susceptibility to fracture. Therefore, it is important that minimally invasive treatments be performed to preserve the dental structure and increase the resistance to fracture of endodontically treated posterior teeth. To evaluate under axial loads, using the finite element method, the stress distribution in endodontically treated molars restored with both transfixed or vertical glass fiber posts (GFP) and resin composite. An endodontically treated molar 3D-model was analyzed using finite element analyses under four different conditions, class II resin composite (G1, control model), vertical glass fiber post (G2), transfixed glass fiber posts (G3) and vertical and transfixed glass fiber posts (G4). Ideal contacts were considered between restoration/resin composite and resin composite/tooth. An axial load (300 N) was applied to the occlusal surface. The resulting tensile stresses were calculated for the enamel and dentin tissue from five different viewports (occlusal, buccal, palatal, mesial and distal views). According to the stress maps, similar stress trends were observed, regardless of the glass fiber post treatment. In addition, for the G1 model (without GFP), a high-stress magnitude can be noticed in the proximal faces of enamel (7.7 to 14 MPa) and dentin (2.1 to 3.3 MPa) tissue. The use of transfixed glass fiber post is not indicated to reduce the stresses, under axial loads, in both enamel and dentin tissue in endodontically treated molar with a class II cavity.

RESUMO

AIM AND OBJECTIVE: This study aims to evaluate the effect of different resin cements on the bond strength (BS) of custom-made glass fiber posts (GFPs) using the push-out test. MATERIALS AND METHODS: Twenty-four uniradicular bovine teeth were selected. The crowns were sectioned at the cementoenamel junction, and the root canals were treated. The post spaces of the teeth were prepared to a length of 12 mm to receive a GFP. The specimens were randomly assigned to three experimental groups (n = 8), according to the resin cement used to fix the GFPs: RelyX U200 (U200), Allcem Core (ACC), and Allcem Dual (ACD). Each specimen was sectioned into six slices per root third (cervical, middle, and apical), which were subjected to the push-out test. BS values were calculated and compared using the Kruskal-Wallis and Friedman tests. RESULTS: There were significant differences in the middle third, according to the resin cement type used (p < 0.05). ACD showed lower BS values (p < 0.05). Significant differences were observed for ACD among the thirds of the slices, with the lowest values also observed for the middle third (p < 0.05). CONCLUSION: The present study shows that ACC and U200 showed higher BS values compared with ACD, and were also less influenced by the depth of the root dentin. CLINICAL SIGNIFICANCE: The restoration of endodontically treated teeth is a challenge in dentistry, and, in most cases, will require installation of fiberglass pins. In this respect, several types of resin cements are indicated for cementation of these pins; for this reason, their adhesiveness must be adequately investigated. Conventional cements and self-adhesive cements have shown satisfactory performance in cementing the custom-made GFPs, thereby making these cements satisfactory clinical choices. The present study suggests that ACD had lower performance than the other two cements evaluated.

Assuntos

RESUMO

Introducción: Las alternativas de tratamiento de órganos dentales con gran destrucción en su estructura varían, no sólo por el material de restauración, sino también por el valor económico y estético. Dentro de las alternativas existe: corona convencional, endocorona cuyo objetivo principal es la elaboración de una restauradora que evita la colocación de postes intraconducto y endocorona con ausencia de una pared axial (EPA) que se realiza cuando una pared, mesial, distal, vestibular o palatina está ausente. Objetivo: Verificar si la endocorona EPA se comporta de igual manera que las coronas convencionales y endocoronas al medir su resistencia ante fuerzas de tracción. Material y métodos: Treinta premolares fueron tratados endodóncicamente, 10 fueron preparados para recibir una corona convencional (grupo A), 10 para endocorona (grupo B) y 10 para endocorona EPA (grupo C). Se realizaron fuerzas de tracción para obtener el valor máximo en el cual las coronas fallaron. Se realizó una prueba ANOVA para comparar los resultados. Resultados: Al someter a los tres tipos de coronas a fuerzas de tracción los resultados obtenidos fueron: 3.04 ± 0.55 MPa para la corona, 7.08 ± 1.6 MPa para la endocorona y 6.17 ± 1.12 MPa para la endocorona EPA. Conclusiones: No existió diferencia significativa entre la endocorona (7.08 MPa) y la EPA (6.17 MPa), convirtiéndose en una alternativa de tratamiento con buen pronóstico en la práctica diaria (AU)

Introduction: The alternatives of treatment of tooth with excessive wear vary not only by the restoration material but also by the economic and aesthetic value. Among the alternatives there is: conventional crown, endocrown whose main objective is the elaboration of a restorative that avoids the placement of intraconducting posts and endocrown without one axial wall (EPA) that is done when a wall; mesial, distal, vestibular or palatal is absent. Objective: To verify if the (EPA) behaves in the same way as the conventional crown and endocrown when measuring its resistance to tensile strength. Material and methods: 30 premolars were treated endodontically, ten were prepared to receive a conventional crown, 10 for endocrown and 10 for EPA. Tensile strength were performed to obtain the maximum value at which the crowns failed, an ANOVA test was performed to compare the results. Results: When the three types of crowns were subjected to tensile strength, the results obtained were; 3.04 ± 0.55 MPa for the crown, 7.08 ± 1.6 MPa for the endocrown and 6.17 ± 1.12 MPa for the EPA endocrown. Conclusions: There was no significant difference between the endocrown (7.08 MPa) and EPA endocrown (6.17 MPa) becoming an alternative treatment with good prognosis in daily practice (AU)

Assuntos

RESUMO

ABSTRACT Introduction: to determine the frequency of fenestration and dehiscence bone defects present in maxillary teeth with apical periodontitis, mainly in teeth with endodontic treatment, as they are frequently cause of nonspecific symptoms after treatment. Methods: 1201 Maxillary Cone Beam Computed Tomography (CBCT) exams were analyzed and 803 teeth with apical periodontitis were selected. Results: of the teeth with apical periodontitis, 142 had a fenestration defect (18%) of which 105 teeth (74%) were endodontically treated. The highest frequency was observed in premolars, with no statistical differences between groups. Dehiscence defect was found in 139 teeth (17%) out of which 90 (65%) were endodontically treated. The highest frequency was observed in molars, with statistical differences in relation to other tooth types (p< 0.001). Conclusion: an important number of teeth with apical periodontitis present dehiscence or fenestration bone defects, especially in teeth with root canal treatment.

Resumen Introducción: determinar la frecuencia de fenestraciones y dehiscencias presentes en dientes maxilares con periodontitis apical, principalmente en dientes con tratamiento de endodoncia, pues frecuentemente son causa de síntomas inespecíficos después del tratamiento. Métodos: se examinaron y analizaron 1201 tomografías computarizadas de haz cónico (TCHC), y se seleccionaron 803 dientes con periodontitis apical. Resultados: de los dientes con periodontitis apical, 142 presentaban fenestración (18%), de los cuales, 105 dientes (74%) estaban tratados endodónticamente. La mayor frecuencia fue observada en premolares, sin diferencias estadísticas entre los grupos. La dehiscencia fue encontrada en 139 dientes (17%), de los cuales 90 (65%) estaban tratados endodónticamente. La mayor frecuencia fue encontrada en molares con diferencia estadísticas en relación con los otros tipos de dientes (p<0,001). Conclusión: un importante número de dientes con periodontitis apical presentan fenestraciones y dehiscencias, especialmente en dientes con tratamiento de canales radiculares.

Assuntos

RESUMO

To evaluate whether dental crown topography influences the fracture resistance of premolars treated endodontically and with MOD preparation subjected to different restorative protocols. Sixty-four human premolars with one or two roots in equal numerical proportions (n) were selected and randomly divided into four groups (n = 8): (S = single-rooted; D = double-rooted) SS: sound single-rooted; SNR: endodontics (E) + MOD cavity preparation; SR: E + MOD + resin restoration (RS); SP: E + MOD + RS + horizontal zirconia post (ZP); DS: sound double-rooted; DNR: E + MOD; DR: E + MOD + RS; and DP: E + MOD + RS + ZP. After allocation to the groups, the samples were thermocycled and then subjected to the fracture resistance test. Failures after the fracture test were classified as irreparable (with pulp floor fracture) or reparable (without pulp floor fracture). Data were analysed using one-way anova and the Tukey test (α = 0.05). Single-rooted premolars were more resistant to fracture than double-rooted premolars. The restorative treatment using a horizontally transfixed zirconia post improved fracture resistance, resembling that of a healthy tooth.

Assuntos

RESUMO

The purpose of this study is to evaluate the effect of pulp chamber extension angles and filling material mechanical properties on the biomechanical response of a ceramic endocrown. A 3D model of maxillary molar that underwent endodontically treatment was exported to computer aided design software to conduct finite element analysis (FEA). The endocrown model was modified considering different pulp chamber extension angles (right angle; 6°, 12° and 18° of axial divergence). The solids were imported into the computer aided engineering software in Standard for the Exchange of Product Data (STEP) format. Nine different filling materials were simulated to seal the orifice of the root canal system under each endocrown restoration (resin composite, bulk-fill resin composite, alkasite, flowable resin composite, glass ionomer cement, autocured resin-reinforced glass ionomer cement, resin cement, bulk-fill flowable resin composite, zinc oxide cement), totaling 36 models. An axial load (300 N) was applied at the occlusal surface. Results were determined by colorimetric graphs of von-Misses stress (VMS) and Maximum Principal Stress (MPS) on tooth, cement layer, and endocrown restorations. VMS distribution showed a similar pattern between the models, with more stress at the load region for the right-angled endocrowns. The MPS showed that the endocrown intaglio surface and cement layer showed different mechanical responses with different filing materials and pulp chamber angles. The stress peaks plotted in the dispersion plot showed that the filling material stiffness is proportional to the stress magnitude in the endocrown, cement layer and tooth adhesive surface. In addition, the higher the pulp chamber preparation angle, the higher the stress peak in the restoration and tooth, and the lower the stress in the cement layer. Therefore, 6° and 12° pulp chamber angles showed more promising balance between the stresses of the adhesive interface structures. Under the conditions of this study, rigid filling materials were avoided to seal the orifice of root canal system when an endocrown restoration was planned as rehabilitation. In addition, the pulp chamber axial walls were prepared between 6° and 12° of divergence to balance the stress magnitude in the adhesive interface for this treatment modality.

RESUMO

The goal of this study was to evaluate the stress distribution in an endocrown restoration according to different provisional restorative materials. An endodontically treated maxillary molar model was selected for conducting the finite element analysis (FEA), with a determined amount of dental remnant of 1.5 mm. The model was imported to the analysis software (ANSYS 19.2, ANSYS Inc., Houston, TX, USA) in STEP format. All contacts were considered perfectly bonded. The mechanical properties of each structure were considered isotropic, linear, elastic, and homogeneous. Three different provisional restorative materials were simulated (acrylic resin, bis-acrylic resin, and resin composite). An axial load (300 N) was applied at the occlusal surface in the center of the restoration. Results were determined by colorimetric stress maps of maximum principal stress, maximum shear stress, and total deformation. The different materials influenced the stress distribution for all structures; the higher the material's elastic modulus, the lower the stress magnitude on the cement layer. In the present study, all provisional restorative materials showed similar stress patterns in the endocrown and on the cement layer however, with different magnitude. Based on this study limitation, the use of resin composite to manufacture provisional endocrowns is suggested as a promising material to reduce the stresses in the cement layer and in the dental tissue surfaces.

RESUMO

OBJECTIVES: This systematic review and meta-analysis compared the effects of immediate and delayed post space preparation on apical sealing. MATERIALS AND METHOD: Two independent authors conducted a systematic search (PubMed/Medline, Cochrane Library, and other databases, until February 2020) and a risk of bias evaluation. Only in vitro studies that compared the effects of immediate and delayed post space preparations on apical filling and adhesion of the post were eligible. RESULT: Of the 742 articles retrieved, 32 were included. Most of the studies used single-rooted human teeth and rotary files for root canal preparation, a single-cone technique for the filling protocol, and rotary instruments for post space preparation. Various delayed preparation times were evaluated: 8-72 h, 5-30 days (mainly 7 days), and 4 months. In nine studies, the delayed groups showed more apical leakage, while four studies reported more leakage in the immediate groups; ten studies found no significant difference. One study found more bacterial penetration in the delayed group, whereas three studies showed no significant difference. One study reported more voids in the delayed group, while another found no such difference. Three studies showed better post-bond strength in the delayed group, one in the immediate group, whereas three found no significant difference in post-bond strength. Three studies employing varied sealers for root canal fillings were considered for meta-analysis. Two subgroup analyses were also performed (one concerning the use of resin-based sealers (AH Plus), another for zinc oxide-eugenol-based sealers). The results of the meta-analysis showed that a delayed post space preparation led to a significantly higher apical leakage than an immediate preparation (mean difference = 0.41 mm, confidence interval = 0.24-0.59, p < 0.001). CONCLUSION: Delayed post space preparation seems to negatively influence apical sealing; however, further studies are needed to determine the influence of the timing of post space preparation on the other parameters. CLINICAL RELEVANCE: Immediate post space preparation may be the safest clinical choice to prevent apical leakage.

Assuntos

RESUMO

To assess whether access cavity design influences the fracture strength of endodontically treated and restored molars. Fifty human lower molars with standard crown dimensions were selected and assigned to the following groups: S - positive control (healthy tooth), ET - negative control (conventional endodontic access (CEA) and no restoration), NI - negative control (minimally invasive endodontic access (MEA) and no restoration), ETR (CEA + restoration with Bulkfill flow) and NIR (MEA + restoration with Bulkfill flow). The specimens were subjected to a compression test. The teeth were inspected for the site of fracture: either pulp floor or cusp. ANOVA, followed by Tukey's multiple comparison test (α = 5%), was used for statistical analysis. The type of access cavity preparation did not increase the fracture strength of endodontically treated teeth. Even with the restoration, all teeth with endodontic access performed had a higher incidence of fractures at the pulp chamber floor level.

Assuntos

RESUMO

OBJECTIVES: This study evaluated factors associated with vertical root fracture in endodontically treated teeth, using a cone-beam computed tomography (CBCT) image database. MATERIALS AND METHODS: The sample for this case-control study consisted of 81 CBCT scans of teeth with vertical root fracture (VRF) and 81 CBCT scans of non-fractured teeth, matched by age, sex, and tooth position. The analyzed variables included dentin thickness, an intraradicular post, an adjacent implant, and a missing adjacent tooth. Student's t test test was used to compare the quantitative variables. The chi-square test was used to compare the categorical variables. Logistic regression was performed to evaluate the association between the presence of VRF and the independent factors assessed. RESULTS: The mean dentin thickness of fractured teeth was 1.3 mm, whereas that of non-fractured ones was 1.5 mm (p < 0.001). There was no difference between the fractured and non-fractured groups, regarding implant frequency or missing adjacent tooth (p > 0.05). There were a significantly larger number of teeth with posts in the fractured versus non-fractured group (p = 0.007). However, dentin thickness ≤ 1.3 mm was the only factor associated with VRF in the multiple regression model (OR = 3.60, 95%CI = 1.76-7.37). CONCLUSIONS: Dentin thickness may influence the development of VRF. Dentin thickness ≤ 1.3 mm is associated with a greater likelihood of fracture than ≥ 1.4 mm. CLINICAL RELEVANCE: This study suggests there may be a minimum amount of safe dentin thickness that should be preserved after endodontic instrumentation.

Assuntos