RESUMO

Bifunctional electrocatalysts are the attractive research in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) in the overall water-splitting reactions. The design and development of the cost-effective OER/HER bifunctional electrocatalysts with superior catalytic activity are still remaining as the big challenges. Herein, we have developed the CuO-ZnO nanocomposite as a bifunctional OER/HER electrocatalyst via simple chemical precipitation method. The nanocomposite was investigated for its crystalline structure, surface morphology and the functions of elements using XRD, FT-IR, SEM, TEM and XPS characterization techniques, respectively. The nanocomposite exhibited the excellent activity for the overall water-splitting in an alkaline medium. The CuO-ZnO nanocomposite showed the less onset potential of 1.4 and 0.15 V versus RHE in 1M KOH (Tafel slopes value of 0.180 and 0.400 V dec-1) for OER and HER, respectively. Hence, the as-prepared bifunctional electrocatalyst displayed the high stability for 10 h in the water electrolysis processes.

Assuntos

RESUMO

The present work reports the synthesis and the physicochemical characterization of biochar from the organic wastes of nopal (Opuntia Leucotricha), coffee grounds (Coffea arabica) and Ataulfo mango seeds (Mangifera indica) as alternative electrocatalyst supports to Vulcan XC-72 carbon black. The biochars were prepared using pyrolysis from organic wastes collected at three temperatures, 600, 750 and 900 °C, under two atmospheres, N2 and H2. The synthesized biochars were characterized using Raman spectroscopy and scanning electron microscopy (SEM) to obtain insights into their chemical structure and morphological nature, respectively, as a function of temperature and pyrolysis atmosphere. A N2 adsorption/desorption technique, two-point conductivity measurements and cyclic voltammetry (CV) were conducted to evaluate the specific surface area (SSA), electrical conductivity and double-layer capacitance, respectively, of all the biochars to estimate their physical properties as a possible alternative carbon support. The results indicated that the mango biochar demonstrated the highest properties among all the biochars, such as an electrical conductivity of 8.3 S/cm-1 at 900 °C in N2, a specific surface area of 829 m2/g at 600 °C in H2 and a capacitance of ~300 mF/g at 900 °C in N2. The nopal and coffee biochars exhibited excellent specific surface areas, up to 767 m2/g at 600 °C in N2 and 699 m2/g at 750 °C in H2, respectively; nonetheless, their electrical conductivity and capacitance were limited. Therefore, the mango biochar at 900 °C in N2 was considered a suitable alternative carbon material for electrocatalyst support. Additionally, it was possible to determine that the electrical conductivity and capacitance increased as a function of the pyrolysis temperature, while the specific surface area decreased for some biochars as the pyrolysis temperature increased. Overall, it is possible to conclude that heat treatment at a high temperature of 900 °C enhanced the biochar properties toward electrocatalyst support applications.

RESUMO

In this work, recent research progresses in the formation of Pt3Cu nanoparticles onto the surface of graphene are described, and the obtained results are contrasted with previously published theoretical studies. To form these nanoparticles, tetrabutylammonium hexachloroplatinate, and copper acetylacetonate are used as platinum and copper precursors, respectively. Oleylamine is used as a reductor and a solvent. The obtained catalyst is characterized via X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive spectroscopy X-ray (EDS). To assess the catalytic activity, the graphene-supported Pt3Cu material is tested with cyclic voltammetry, "CO stripping", and oxygen reduction reaction potentiodynamic curves to find the nature and the intrinsic electrochemical activity of the material. It can be observed that the tetrabutylammonium cation plays a critical role in anchoring and supporting nanoparticles over graphene, from which a broad discussion about the true nature of the anchoring mechanism was derived. The growth mechanism of the nanoparticles on the surface of graphene was observed, supporting the conducted theoretical models. With this study, a reliable, versatile, and efficient synthesis of nanocatalysts is presented, demonstrating the potentiality of Pt3Cu/graphene as an effective cathode catalyst. This study demonstrates the importance of reliable ab inito theoretical results as a useful source of information for the synthesis of the Pt3Cu alloy system.

Assuntos

RESUMO

The development of efficient electrocatalysts for the oxygen evolution reaction (OER) is of paramount importance in sustainable water-splitting technology for hydrogen production. In this context, this work reports mixed-valence oxide samples of the MnXCo3-XO4 type (0 ≤ X ≤ 1) synthesized for the first time by the proteic sol-gel method using Agar-Agar as a polymerizing agent. The powders were calcined at 1173 K, characterized by FESEM, XRD, RAMAN, UV-Vis, FT-IR, VSM, and XPS analyses, and were investigated as electrocatalysts for the oxygen evolution reaction (OER). Through XRD analysis, it was observed that the pure cubic phase was obtained for all samples. The presence of Co3+, Co2+, Mn2+, Mn3+, and Mn4+ was confirmed by X-ray spectroscopy (XPS). Regarding the magnetic measurements, a paramagnetic behavior at 300 K was observed for all samples. As far as OER is concerned, it was investigated in an alkaline medium, where the best overpotential of 299 mV vs. RHE was observed for the sample (MnCo2O4), which is a lower value than those of noble metal electrocatalysts in the literature, together with a Tafel slope of 52 mV dec-1, and excellent electrochemical stability for 15 h. Therefore, the green synthesis method presented in this work showed great potential for obtaining electrocatalysts used in the oxygen evolution reaction for water splitting.

RESUMO

A simple and rapid synthesis of a CoFeRu-based electrocatalyst by a microwave-assisted method (using water as the microwave absorbing solvent) is reported in this work. Agglomerates with different sizes and shapes are observed by scanning electron microscopy technique. The energy dispersive X-ray spectroscopy shows a low atomic percentage of Co and similar atomic percentage of Fe and Ru. However, the X-ray diffraction exhibits only the presence of metallic Ru and Fe2O3 (hematite) phases. The oxygen reduction without and with 2 mol L-1 methanol is studied using the rotating disk electrode technique. The electrochemical kinetic parameters obtained are compared to a similar electrocatalyst reported in the literature, which was synthesized using a mixture of an organic solvent with DI water as the microwave absorbing solvent. An improvement on the activity of the electrocatalyst synthesized is observed, where high Tafel slopes are not observed. The electrocatalyst also showed tolerance to the presence of methanol during the oxygen reduction reaction.

RESUMO

This study describes a systematic investigation of the electrocatalytic activity of poly[Ni(salen)] films, as catalysts for the electro-oxidation of Cn alcohols (Cn = methanol, ethanol, and glycerol) in alkaline medium. The [Ni(salen)] complex was electropolymerized on a glassy carbon surface and electrochemically activated in NaOH solution by cyclic voltammetry. X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy results indicate that during the activation step the polymeric film hydrolyzes, leading to the formation of ß-Ni(OH)2 spherical nanoparticles, with an average size of 2.4 ± 0.5 nm, encapsulated with the poly[Ni(salen)] film. Electrochemical results obtained together with the in situ Fourier transform infrared spectroscopy confirm that the electro-oxidation of methanol, ethanol, and glycerol occurs by involving a cycling oxidation of ß-Ni(OH)2 with the formation of ß-NiOOH species, followed by the charge transfer to the alcohols, which regenerates ß-Ni(OH)2. Analyses of the oxidation products at low potentials indicate that the major product obtained during the oxidation of methanol and glycerol is the formate, while the oxidation of ethanol leads to the formation of acetate. On the other hand, at high potentials (E = 0.6 V), there is evidence that the oxidation of Cn alcohols leads to carbonate ions as an important product.

RESUMO

The preparation and electrochemical characterization of a nickel hydroxide modified nickel electrode as well as its behavior as electrocatalyst toward the oxidation of hydrochlorothiazide (HCTZ) were investigated. The electrochemical behavior of the modified electrode and the electrooxidation of HCTZ were explored using cyclic voltammetry. The voltammetric response of the modified electrode in the detection of HCTZ is based on the electrochemical oxidation of the Ni(II)/Ni(III) and a chemical redox process. The analytical parameters for the electrooxidation of HCTZ by the nickel hydroxide modified nickel electrode were obtained in NaOH solution, in which the linear voltammetric response was in the concentration range from 1.39×10(-5) to 1.67×10(-4)mol L(-1) with a limit of detection of 7.92×10(-6)mol L(-1) and a sensitivity of 0.138 µA Lmmol(-1). Tafel analysis was used to elucidate the kinetics and mechanism of HCTZ oxidation by the modified electrode.

Assuntos