RESUMO

The Covid-19 pandemic has pushed the Intensive Care Units (ICUs) into significant operational disruptions. The rapid evolution of this disease, the bed capacity constraints, the wide variety of patient profiles, and the imbalances within health supply chains still represent a challenge for policymakers. This paper aims to use Artificial Intelligence (AI) and Discrete-Event Simulation (DES) to support ICU bed capacity management during Covid-19. The proposed approach was validated in a Spanish hospital chain where we initially identified the predictors of ICU admission in Covid-19 patients. Second, we applied Random Forest (RF) to predict ICU admission likelihood using patient data collected in the Emergency Department (ED). Finally, we included the RF outcomes in a DES model to assist decision-makers in evaluating new ICU bed configurations responding to the patient transfer expected from downstream services. The results evidenced that the median bed waiting time declined between 32.42 and 48.03 min after intervention.

RESUMO

BACKGROUND: The World Health Organization (WHO) has called for the elimination of cervical cancer. Unfortunately, the implementation of cost-effective prevention and control strategies has faced significant barriers, such as insufficient guidance on best practices for resource and operations planning. Therefore, we demonstrate the value of discrete event simulation (DES) in implementation science research and practice, particularly to support the programmatic and operational planning for sustainable and resilient delivery of healthcare interventions. Our specific example shows how DES models can inform planning for scale-up and resilient operations of a new HPV-based screen and treat program in Iquitos, an Amazonian city of Peru. METHODS: Using data from a time and motion study and cervical cancer screening registry from Iquitos, Peru, we developed a DES model to conduct virtual experimentation with "what-if" scenarios that compare different workflow and processing strategies under resource constraints and disruptions to the screening system. RESULTS: Our simulations show how much the screening system's capacity can be increased at current resource levels, how much variability in service times can be tolerated, and the extent of resilience to disruptions such as curtailed resources. The simulations also identify the resources that would be required to scale up for larger target populations or increased resilience to disruptions, illustrating the key tradeoff between resilience and efficiency. Thus, our results demonstrate how DES models can inform specific resourcing decisions but can also highlight important tradeoffs and suggest general "rules" for resource and operational planning. CONCLUSIONS: Multilevel planning and implementation challenges are not unique to sustainable adoption of cervical cancer screening programs but represent common barriers to the successful scale-up of many preventative health interventions worldwide. DES represents a broadly applicable tool to address complex implementation challenges identified at the national, regional, and local levels across settings and health interventions-how to make effective and efficient operational and resourcing decisions to support program adaptation to local constraints and demands so that they are resilient to changing demands and more likely to be maintained with fidelity over time.

RESUMO

Anatomic pathology services study disease in hospitals on the basis of macroscopic and microscopic examination of organs and tissues. The focus of this research investigation was on improving clinical biopsy diagnosis times through simulation based on the Box-Muller algorithm to reduce the waiting time in the diagnosis of clinical biopsies. The data were provided by a hospital in San José (Costa Rica). They covered 5 years and showed waiting times for a pathological diagnosis that for some biopsies were close to 120 days. The correlation between the main causes identified and the cycle time in the biopsy diagnostic process was defined. A statistical analysis of the variables most representative of the process and of the waiting times was carried out. It followed the DMAIC structure (Define, Measure, Analyse, Improve, Control) for the continuous improvement of processes. Two of the activities of the process were identified as being the main bottlenecks. Their processing times had a normal distribution, for which reason a Box-Muller algorithm was used to generate the simulation model. The results showed that waiting times for a diagnosis can be reduced to 3 days, for a productive capacity of 8 000 biopsies per annum, optimizing the logistics performance of health care.

Assuntos

RESUMO

Amid the devastating effects caused by the pandemic of the new Coronavirus (COVID-19), health leaders around the world are adding efforts to search efficient and effective responses in the fight against the disease. Conventional health centers, such as hospitals and emergency departments have been registering an increase in demand and atypical patterns due to the high transmissibility of the virus. In this context, the adoption of Temporary Hospitals (THs) is effective in trying to relieve conventional hospitals and direct efforts in the treatment of suspected and positive patients for COVID-19. However, some requirements should be considered regarding the processes performed by THs to maintain the health and safety of patients and staff. Based on the literature, we evaluated aspects related to patient safety in THs, especially linked to biosafety of medical facilities, and patient transport and visit. We highlight the analysis of flows and layouts, hospital cleaning and patient care. We described two case studies to demonstrate the proposed approach. As result, simulation tests improved safety metrics, such as waiting time for procedures, movement intensity in each area, length of stay and TH capacity. We conclude that the approach allows us to provide better THs that prevent cross-contamination, provide suitable care, and meet the demand.

RESUMO

The planning of hospital beds is among the most debated problems in healthcare. Despite being an important issue, many initiatives have failed to sustain services improvements, resulting in high costs and also high refusal rates. The stochastic problem involves conflicting criteria, therefore, we propose a Simulation-Optimisation approach to solve it. The Evolutionary Algorithm NSGA-II drives the process, and the solutions are validated and evaluated via Discrete Event Simulation. An application is performed in one of the health regions of the state of Minas Gerais, Brazil, where the public health system assists nearly 80% of the patients. The results pointed out that the proposed approach could find efficient and feasible solutions for the problem. Therefore, it is a good alternative to empirical methods currently used in Brazil to set hospital beds allocation.

Assuntos

RESUMO

Sizing and allocating health-care professionals are a critical problem in the management of emergency departments (EDs) managed by a public company in Rio de Janeiro (Brazil). An efficient ED configuration that is cost and time effective must be developed by this company for hospital managers. In this paper, the problem of health-care professional configurations in EDs is modelled to minimise the total labour cost while satisfying patient queues and waiting times as defined by the actual ED capacity and current clinical protocols. To solve this issue, mixed integer linear programming (MILP) that allocates health-care professionals and specifies the amount of professionals who must be hired is proposed. To consider the uncertainties in this environment and evaluate their impacts, a discrete-event simulation model is developed to reflect patient flow. An optimisation and simulation approach is used to search for efficiency leads for different ED configurations. These configurations change depending on the shift and the day of the week.

RESUMO

Tires require adequate disposal at the end of their useful life due to the environmental damage that improper disposal can cause. Since the 1990s, Brazilian legislation has laid out specific rules for tire disposal. This brought about results in 2017, when 93% of the target was met for environmentally correct tire disposal, according to the Brazilian Institute of the Environment and Renewable Natural Resources. To reach this index, consumers, business people, city halls, and manufacturers had to work together. However, cities with fewer than 100,000 inhabitants continued to encounter difficulties to carry out the process efficiently. Thus, the objective of this study is to propose new alternatives so that small cities can plan and implement reverse logistics management for unusable tires. The tool used to verify improvement was discrete event simulation, which allowed for the creation of scenarios, experimenting with changes to the consortium's operation. The analysis confirms that the consortium of cities can have a more efficient process in the destination of tires, with the possibility of reducing costs by 15%, emission of pollutant gases by 71%, and CO2 by 57%.

Assuntos

RESUMO

OBJECTIVE: The aim of this article is to analyze the influence of the variability of the standard time in the simulation of the assembly operations of manufacturing systems. BACKGROUND: Discrete event simulation (DES) has been used to provide efficient analysis during the design of a process or scenario. However, the modeling activities of new configurations face the problem of data availability and reliability when it comes to seeking standard times that are effective in representing the actual process under analysis, especially when the process cannot be monitored. METHOD: The methods-time measurement (MTM) is used as a source of standard times for simulation. Assembly activities were performed at a Learning Factory facility, which provided the necessary structure for simulating real production processes. Simulation performances using different variability of standard times were analyzed to define the impact of data characteristics. RESULTS: The MTM standard time presented an error of approximately 5%. The definition of the data variability of standard times and the statistical distribution impacts were shown in the simulation results, with errors above 6% being observed, interfering with the model reliability. CONCLUSION: Based on the study, to increase the adherence of a simulation to represent a real process, it is recommended to use triangular distributions with central values greater than those established via the MTM for the representation of the standard times of new assembly processes or scenarios using DES. APPLICATION: The study contributions can be applied in assembly line design, providing a reliable model representing real processes and scenarios.

Assuntos

RESUMO

Nowadays Brazil has a complex cancer care scenario. There are nearly 600.000 new cancer cases each year in Brazil, and the huge majority of patients have some contact with hospital services. However, long waiting queues for diagnostics and treatments have become common. One of the critical success factors in a cancer treatment is early diagnosis. The reduction of waiting time to start therapeutic procedures is one of the main issues for improvement of patient's quality of life and possibilities of cure. The objective of this work is to describe the development of a decision support system that improves the identification of access alternatives, appointment scheduling and employment of available resources. The Theory of Constraints was used to identify bottlenecks in patient treatment flow and a Discrete Events Simulation model was used to reduce patients' waiting time to start cancer treatment.

Assuntos

RESUMO

Nowadays Brazil has a complex cancer care scenario. There are nearly 600.000 new cancer cases each year in Brazil, and the huge majority of patients have some contact with hospital services. However, long waiting queues for diagnostics and treatments have become common. One of the critical success factors in a cancer treatment is early diagnosis. The reduction of waiting time to start therapeutic procedures is one of the main issues for improvement of patient's quality of life and possibilities of cure. The objective of this work is to describe the development of a decision support system that improves the identification of access alternatives, appointment scheduling and employment of available resources. The Theory of Constraints was used to identify bottlenecks in patient treatment flow and a Discrete Events Simulation model was used to reduce patients' waiting time to start cancer treatment.

Assuntos

RESUMO

The demand for highly efficient and effective services and consumer goods is an essential prerequisite for modern organizations. In healthcare, efficiency and effectiveness mean reducing disabilities and maintaining human life. One challenge is guaranteeing rapid Emergency Medical Service (EMS) response. This study analyzes the EMS of Belo Horizonte, Brazil, using two modeling techniques: optimization and simulation. The optimization model locates ambulance bases and allocates ambulances to those bases. A simulation of this proposed configuration is run to analyze the dynamic behavior of the system. The main assumption is that optimizing the ambulance base locations can improve the system response time. Feasible solutions were found and the current system may be improved while considering economic and operational changes.

Assuntos

RESUMO

Quality improvement (QI) efforts are an indispensable aspect of health care delivery, particularly in an environment of increasing financial and regulatory pressures. The ability to test predictions of proposed changes to flow, policy, staffing, and other process-level changes using discrete event simulation (DES) has shown significant promise and is well reported in the literature. This article describes how to incorporate DES into QI departments and programs in order to support QI efforts, develop high-fidelity simulation models, conduct experiments, make recommendations, and support adoption of results. The authors describe how DES-enabled QI teams can partner with clinical services and administration to plan, conduct, and sustain QI investigations.

Assuntos

RESUMO

OBJECTIVES: Morbid obesity represents high costs to health institutions in controlling associated comorbidities. It has been shown that bariatric surgery resolves or improves comorbidities, thus reducing resource utilization. This analysis estimated the total costs of treating morbid obesity and related comorbidities through conventional treatment compared to bariatric surgery under the Mexican public health system perspective. METHODS: An economic evaluation model was developed by using discrete event simulation. One hundred fifty patients were created in each arm, with considered comorbidities allocated randomly. Preoperative comorbidity prevalences and bariatric surgery's efficacy for resolving them were obtained from published literature. Comorbidity treatment costs were obtained from the 2007 Mexican Institute of Social Security diagnosis-related group list and publications from the National Institute of Public Health. Only 12 patients were operated each month on the surgical arm. Complications associated with comorbidities were not considered. The considered time frame for simulation was 10 years, with a 4.5% annual discount rate. RESULTS: Return on investment, or cost breakeven point, for bariatric surgery was obtained after 6.8 years. Total costs for the surgical group were 52% less than conventional treatment group costs after 10 years. Bariatric surgery reduced the cost of treating type 2 diabetes, hypertension, and hypercholesterolemia by 59%, 53%, and 65%, respectively. Return on investment for bariatric surgery in patients with type 2 diabetes as the only comorbidity was 4.4 years. CONCLUSIONS: Despite conservative assumptions, investment in bariatric surgery is recouped in 6.8 years, generating relevant potential savings in the treatment of morbidly obese patients. In high-risk subpopulations, return on investment time is shorter.