RESUMO

The dressings are materials that can improve the wound-healing process in patients with medical issues. Polymeric films are frequently used as dressings with multiple biological properties. Chitosan and gelatin are the most used polymers in tissue regeneration processes. There are usually several configurations of films for dressings, among which the composite (mixture of two or more materials) and layered ones stand out (layers). This study analyzed the antibacterial, degradable, and biocompatible properties of chitosan and gelatin films in 2 configurations, composite and bilayer, composite. In addition, a silver coating was added to enhance the antibacterial properties of both configurations. After the study, it was found that the bilayer films have a higher antibacterial activity than the composite films, having inhibition halos between 23% and 78% in Gram-negative bacteria. In addition, the bilayer films increased the fibroblast cell proliferation process, reaching up to 192% cell viability after 48 h of incubation. On the other hand, composite films have greater stability since they are thicker, with 276 µm, 243.8 µm, and 239 µm compared to 236 µm, 233 µm, and 219 µm thick for bilayer films; and a low degradation rate compared to bilayer films.

RESUMO

Type I collagen (Col_1) is one of the main proteins present in the skin extracellular matrix, serving as support for skin regeneration and maturation in its granulation stage. Electrospun materials have been intensively studied as the next generation of skin wound dressing mainly due to their high surface area and fibrous porosity. However, the electrospinning of collagen-based solutions causes degradation of its structure. In this work, a coaxial electrospinning process was proposed to overcome this limitation. The production of mats of polycaprolactone (PCL)-Col_1/PVA (collagen/poly(vinyl alcohol)) composed of core-shell nanofibers was investigated. PCL solution was used as the core solution, while Col_1/PVA was used as the shell solution. PVA was used to improve the processability of collagen, while PCL was employed to improve the mechanical properties and morphology of Col_1/PVA fibers. The morphology and the cytotoxicity of the fibers were highly dependent on the processing parameters. Defect-free core-shell nanofibers were obtained with a shell/core flow rates ratio = 4, flight distance of 12 cm, and an applied voltage of 16 kV. Using this strategy, the triple helix structure characteristic of the collagen molecule was preserved. Moreover, the common post-processing of solvent removal could be suppressed, simplifying the manufacturing processing of these biomaterials. The nanostructured mats showed no cytotoxicity, high liquid absorption, structural stability, hydrophilic character, and collagen release capacity, making them a potential novel dressing for skin damage regeneration, in special in the case of chronic wounds treatment, in which exogenous collagen delivery is necessary.

Assuntos

RESUMO

Although this is an era of pandemics and many devastating diseases, this is also a time when bionanotechnology flourishes, illuminating a multidisciplinary field where vaccines are quickly becoming a balsam and a prevention against insidious plagues. In this work, we tried to gain and also give a deeper understanding on nanovaccines and their way of acting to prevent or cure cancer, infectious diseases, and diseases caused by parasites. Major nanoadjuvants and nanovaccines are temptatively exemplified trying to contextualize our own work and its relative importance to the field. The main properties for novel adjuvants seem to be the nanosize, the cationic character, and the biocompatibility, even if it is achieved in a low dose-dependent manner.

RESUMO

Drug controlled release technologies (DCRTs) represent an opportunity for designing new therapies. Main objectives are dose number optimization and secondary effects reduction to improve the level of patient/client acceptance. The present work studies DCRTs based in blended polymeric implants for single dose and long-term therapies of florfenicol (FF), a broad spectrum antibiotic. Polymers used were PLGA and Eudragit E100/S100 types. Eudragit/PLGA and FF/PLGA ratios were the main studied factors in terms of encapsulation efficiencies (EEs) and drug release profiles. In addition, morphological and physicochemical characterization were carried out. EEs were of 50-100% depending on formulation composition, and the FF releasing rate was increased or diminished when E100 or S100 were added, respectively. PLGA hydrolytic cleavage products possibly affect Eudragit solubility and matrix stability. Different mathematical models were used for better understanding and simulating release processes. Implants maintained the antimicrobial activity against Pseudomonas aeruginosa up to 12 days on agar plates. The developed DCRTs represents a suitable alternative for florfenicol long-term therapies.

Assuntos

RESUMO

The polymer poly(ε-caprolactone) (PCL) has been used in the biomaterial field for its relatively inexpensive price and suitability for modification. Also, its chemical and biological properties are desirable for biomedical applications. The electrospinning process has been used for producing polymer fibers of PCL due in large part to an increased interest in nanoscale properties and technologies. Moreover, the use of biocompatible polymers for the viability of cell growth is a promising alternative to improve osseointegration. Characterization techniques such as scanning electron microscopy and contact angle were used for analyses of samples. Adult human dermal fibroblasts (neonatal) were utilized to evaluate the biocompatibility of the association of the electrospinning process of the biocompatible polymer (PCL) with TiO2 nanotubes on the Ti-30Ta alloy surface. The results of this study showed a favorable response for adhesion on the surface. This promising material is due to the modulation of the biological response.

Assuntos

RESUMO

In this work, we design and produce micron-sized fiber mats by blending poly(ε-caprolactone) (PCL) with small amounts of block copolymers poly(ethylene oxide)m-block-poly(ε-caprolactone)n (PEOm-b-PCLn) using electrospinning. Three different PEOm-b-PCLn block copolymers, with different molecular weights of PEO and PCL, were synthesized by ring opening polymerization of ε-caprolactone using PEO as initiator and stannous octoate as catalyst. The polymer blends were prepared by homogenous solvent mixing using dichloromethane for further electrospinning procedures. After electrospinning, it was found that the addition to PCL of the different block copolymers produced micron-fibers with smaller width, equal or higher hydrophilicity, lower Young modulus, and rougher surfaces, as compared with micron-fibers obtained only with PCL. Neural stem progenitor cells (NSPC), isolated from rat brains and grown as neurospheres, were cultured on the fibrous materials. Immunofluorescence assays showed that the NSPC are able to survive and even differentiate into astrocytes and neurons on the synthetic fibrous materials without any growth factor and using the fibers as guidance. Disassembling of the cells from the NSPC and acquisition of cell specific molecular markers and morphology progressed faster in the presence of the block copolymers, which suggests the role of the hydrophilic character and porous topology of the fiber mats.

RESUMO

ABSTRACT Demand for medical implants is rising day by day as the world becomes the place for more diseased and older people. Accordingly, in this research, metallocene polyethylene (mPE), a commonly used polymer was treated with UV rays for improving its biocompatibility. Scanning electron microscopy (SEM) images confirmed the formation of crests and troughs, which depicts the improvement of surface roughness of mPE substrates caused by UV etching. Accordingly, the contact angle measurements revealed that the wettability of mPE-2.5 J/cm2 (68.09º) and mPE-5 J/cm2 (57.93º) samples were found to be increased compared to untreated mPE (86.84º) indicating better hydrophilicity. Further, the UV treated surface exhibited enhanced blood compatibility as determined in APTT (untreated mPE- 55.3 ± 2.5 s, mPE-2.5 J/cm2 - 76.7 ± 4.1 s and mPE-5 J/cm2 - 112.3 ± 2 s) and PT (untreated mPE - 24.7 ± 1.5 s, mPE- 2.5 J/cm2 - 34.3 ± 1.1 s and mPE-5 J/cm2 - 43 ± 2 s) assay. Moreover, the treated mPE-2.5 J/cm2 (4.88%) and mPE-5 J/cm2 (1.79%) showed decreased hemolytic percentage compared to untreated mPE (15.40%) indicating better safety to red blood cells. Interestingly, the changes in physicochemical properties of mPE are directly proportional to the dosage of the UV rays. UV modified mPE surfaces were found to be more compatible as identified through MTT assay, photomicrograph and SEM images of the seeded 3T3 cell population. Hence UV-modified surface of mPE may be successfully exploited for medical implants.

Assuntos

RESUMO

ABSTRACT Polymeric stabilizers have received attention in the preparation of nanostructured systems due to their ability to enhance formulation stability. Considering this, the objective of this work was to prepare poly(ε-caprolactone) nanocapsules using the pullulan as a polymeric stabilizer. The nanocapsules were prepared using the interfacial deposition method of preformed polymers and they were characterized in terms of pH, average diameter, polydispersity index, zeta potential, beclomethasone dipropionate content, encapsulation efficiency, photostability and drug release profiles. The formulations showed physicochemical characteristics consistent with nanocarriers for drug delivery such as: average diameter lower than 270 nm, polydispersity indexes lower than 0.2, negative zeta potential (-22.7 to -26.3 mV) and encapsulation efficiencies close to 100%. In addition, the nanocapsules were able to delay the beclomethasone dipropionate photodegradation under UVC radiation and by the dialysis bag diffusion technique, the nanocapsules were able to prolong the drug release. Thus, pullulan could be considered an interesting excipient to formulate polymeric nanocapsules.

Assuntos