RESUMO
Skin inflammation is a symptom of many skin diseases, such as eczema, psoriasis, and dermatitis, which cause rashes, redness, heat, or blistering. The use of natural products with anti-inflammatory properties has gained importance in treating these symptoms. Ursolic acid (UA), a promising natural compound that is used to treat skin diseases, exhibits low aqueous solubility, resulting in poor absorption and low bioavailability. Designing topical formulations focuses on providing adequate delivery via application to the skin surface. The aim of this study was to formulate and characterize lipid-surfactant-based systems for the delivery of UA. Microemulsions and liquid crystalline systems (LCs) were characterized by polarized light microscopy (PLM), rheology techniques, and textural and bioadhesive assays. PLM supported the self-assembly of these systems and elucidated their formation. Rheologic examination revealed pseudoplastic and thixotropic behavior appropriate, and assays confirmed the ability of these formulations to adhere to the skin. In vivo studies were performed, and inflammation induced by croton oil was assessed for response to microemulsions and LCs. UA anti-inflammatory activities of ~60% and 50% were demonstrated by two microemulsions and 40% and 35% by two LCs, respectively. These data support the continued development of colloidal systems to deliver UA to ameliorate skin inflammation.
RESUMO
The synergism between thermoresponsive and bioadhesive polymers can lead to the optimization of materials with enhanced mechanical and bioadhesive properties. Quality by Design can assure the understanding and control of formulation variables. In this approach, Design of Experiment has been widely utilized as an important strategy. Poly(methyl vinyl ether-alt-maleic anhydride) (PVMMA) is a bioadhesive polymer and Pluronic F127 (PF127) shows thermoresponsiveness. The association of these two polymers has been poorly investigated. The aim of this work was to study the mechanical, bioadhesive and rheological properties of polymer mixtures composed of PVMMA and PF127, in order to select the best conditions and formulations for biomedical applications. Textural properties (hardness, compressibility, adhesiveness, cohesiveness and elasticity), softness index, bioadhesion and rheological characteristics (flow and viscoelasticity) showed that 17.5-20% (w/w) PF127-polymer mixtures displayed improved values of the parameters. However, the rheological interaction parameter showed low synergism, due to the polymers' characteristics and system organization. The formulations displayed gelation temperatures suitable for administration, with improved bioadhesive properties mainly at 34 °C and suggests the formulations can be used for biomedical applications. DoE constituted an important tool to investigate these systems showing the main effects that significantly influence the binary mixtures.
Assuntos
Anidridos Maleicos , Poloxâmero , Adesividade , Polímeros , ReologiaRESUMO
Herein, we developed an ethosomal hydrogel based on three types of ethosomes: simple, mixed (surfactant-based micelles and lipid vesicles) or binary (comprising two type of alcohols). Ethanol injection was employed for vesicles preparation, and sodium alginate, as gelling agent. We purposed the local-transdermal administration of the off-the-shelf retinoid fenretinide (FENR) for chemoprevention of breast cancer. Rheograms and flow index values for alginate dispersion (without ethosomes) and hydrogels containing simple, mixed or binary ethosomes suggested pseudoplastic behavior. An increase in the apparent viscosity was observed upon ethosome incorporation. The ethosomal hydrogel displayed increased bioadhesion compared to the alginate dispersion, suggesting that the lipid vesicles contribute to the gelling and bioadhesion processes. In the Hen's Egg Test-Chorioallantoic Membrane model, few spots of lysis and hemorrhage were observed for formulations containing simple (score of 2) and mixed vesicles (score 4), but not for the hydrogel based on the binary system, indicating its lower irritation potential. The binary ethosomal hydrogel provided a slower FENR in vitro release and delivered 2.6-fold less drug into viable skin layers compared to the ethosome dispersion, supporting the ability of the gel matrix to slow down drug release. The ethosomal hydrogel decreased by ~ five-fold the IC50 values of FENR in MCF-7 cells. In conclusion, binary ethosomal gels presented technological advantages, provided sustained drug release and skin penetration, and did not preclude drug cytotoxic effects, supporting their potential applicability as topical chemopreventive systems.
Assuntos
Neoplasias da Mama , Fenretinida , Administração Cutânea , Animais , Neoplasias da Mama/metabolismo , Neoplasias da Mama/prevenção & controle , Galinhas/metabolismo , Sistemas de Liberação de Medicamentos , Feminino , Fenretinida/metabolismo , Fenretinida/farmacologia , Humanos , Hidrogéis/metabolismo , Lipossomos/metabolismo , Pele/metabolismo , Absorção CutâneaRESUMO
Herein, we developed an ethosomal hydrogel based on three types of ethosomes: simple, mixed (surfactant-based micelles and lipid vesicles) or binary (comprising two type of alcohols). Ethanol injection was employed for vesicles preparation, and sodium alginate, as gelling agent. We purposed the local-transdermal administration of the off-the-shelf retinoid fenretinide (FENR) for chemoprevention of breast cancer. Rheograms and flow index values for alginate dispersion (without ethosomes) and hydrogels containing simple, mixed or binary ethosomes suggested pseudoplastic behavior. An increase in the apparent viscosity was observed upon ethosome incorporation. The ethosomal hydrogel displayed increased bioadhesion compared to the alginate dispersion, suggesting that the lipid vesicles contribute to the gelling and bioadhesion processes. In the Hen’s Egg Test–Chorioallantoic Membrane model, few spots of lysis and hemorrhage were observed for formulations containing simple (score of 2) and mixed vesicles (score 4), but not for the hydrogel based on the binary system, indicating its lower irritation potential. The binary ethosomal hydrogel provided a slower FENR in vitro release and delivered 2.6-fold less drug into viable skin layers compared to the ethosome dispersion, supporting the ability of the gel matrix to slow down drug release. The ethosomal hydrogel decreased by ~ five-fold the IC50 values of FENR in MCF-7 cells. In conclusion, binary ethosomal gels presented technological advantages, provided sustained drug release and skin penetration, and did not preclude drug cytotoxic effects, supporting their potential applicability as topical chemopreventive systems.
RESUMO
Emulgels are obtained by the entrapment of an organic phase within a three-dimensional network built by hydrophilic molecules. Polymers based on cross-linked poly(acrylic acid) have been utilized as gel matrices, improving adhesiveness, rheological and mechanical performance. Propolis (PRP) produced by Apis mellifera L. bees displays a wide range of biological activities. Together with curcumin (CUR), they may show synergic anti-inflammatory, antioxidant and antimicrobial action on skin disorders. This work investigated the effect of vegetable oils (sweet almond, andiroba, and passion fruit) with regard to the physicochemical properties of emulgels composed of Carbopol 934P®, Carbopol 974P®, or polycarbophil aiming the CUR and PRP delivery. Physicochemical stability enabled the selection of systems containing passion fruit or andiroba oil. Mechanical and rheological characteristics provided rational comprehension of how vegetable oils and bioactive agents affect the structure of emulsion gels. All formulations exhibited high physiochemical stability and properties dependent on the polymer type, oil, and bioactive agent. Formulations displayed pseudoplastic, thixotropic and viscoelastic properties. Emulgels containing andiroba oil were the most stable systems. Carbopol 934P® or polycarbophil presence resulted in formulations with improved smoothness and mechanical properties. Systems containing andiroba oil and one of these two polymers are promising for further investigations as topical delivery systems of CUR and/or PRP on the skin and mucous membranes.
RESUMO
The high incidence and costs of chronic wounds in the elderly have motivated the search for innovations to improve product performance and the healing process while reducing costs. In this study, bioadhesive nanostructured lipid carriers (NLC) were developed for the co-encapsulation of compounds with antioxidant (α-tocopherol and quercetin) and antimicrobial (tea tree oil) activity for management of wounds. The NLC was produced with shea butter and argan oil, and modified with sodium alginate or chitosan to confer bioadhesive properties. Spherical nanoparticles of ~307-330 nm and zeta potential varying from -21.2 to +11.8 mV were obtained. Thermal analysis demonstrated that the lipid matrix reduced tea tree oil thermal loss (~1.8-fold). Regardless of the type of polysaccharide employed, the NLCs promoted cutaneous localization of antioxidants in damaged (subjected to incision) skin, with a ~74 to 180-fold higher delivery into the skin compared to percutaneous delivery. This result is consistent with the similar bioadhesive properties of chitosan or sodium alginate-modified NLC. Nanoencapsulation of tea tree oil did not preclude its antimicrobial effects against susceptible and resistant strains of S. aureus and P. aeruginosa, while co-encapsulation of antioxidants increased the NLC-induced fibroblasts migration, supporting their potential usefulness for management of wounds.
Assuntos
Alginatos/química , Anti-Infecciosos/farmacologia , Antioxidantes/farmacologia , Quitosana/química , Portadores de Fármacos , Lipídeos/química , Nanopartículas , Cicatrização/efeitos dos fármacos , Animais , Anti-Infecciosos/química , Antioxidantes/química , Movimento Celular/efeitos dos fármacos , Células Cultivadas , Embrião de Galinha , Composição de Medicamentos , Fibroblastos/efeitos dos fármacos , Humanos , Lipídeos/isolamento & purificação , Óleos de Plantas/química , Pseudomonas aeruginosa/efeitos dos fármacos , Pseudomonas aeruginosa/crescimento & desenvolvimento , Quercetina/química , Quercetina/farmacologia , Sapotaceae/química , Pele/efeitos dos fármacos , Pele/metabolismo , Staphylococcus aureus/efeitos dos fármacos , Staphylococcus aureus/crescimento & desenvolvimento , Óleo de Melaleuca/química , Óleo de Melaleuca/farmacologia , alfa-Tocoferol/química , alfa-Tocoferol/farmacologiaRESUMO
Aim: This work aimed to develop a mucoadhesive film composed of a triblock copolymer (poloxamer 407), polyvinyl alcohol and polyvinylpyrrolidone for buccal modified delivery of metronidazole. Materials & methods: Three film formulations containing different polymer amounts were prepared by solvent casting. They were characterized as physicochemical, mechanical and mucoadhesive properties, and in vitro metronidazole release profiles. Results: Films displayed physicochemical, mechanical and mucoadhesive characteristics dependent of polymeric composition and drug presence. They could rapidly swell and promote the fast drug release (80% in 20 min) that was governed by Fickian diffusion. The films showed total disintegration in less than 90 s and total drug release in 30 min. Conclusion: Therefore, the formulations represent a promising alternative for modifying of buccal metronidazole delivery for pharmaceutical applications.
Assuntos
Álcool de Polivinil , Povidona , Adesividade , Administração Bucal , Sistemas de Liberação de Medicamentos , Metronidazol , Mucosa Bucal , PoloxâmeroRESUMO
Objective: The aim of this study was to develop an emulgel for the treatment of rosacea, applying quality by design (QbD).Methods: An emulgel designed to release the active pharmaceutical ingredients (APIs), metronidazole and niacinamide, via an emollient formulation that favors residence time and attenuates facial redness would be an excellent vehicle to develop to treat rosacea. It was decided to design first a vehicle presenting the attributes established in the quality target product profile, and then, after selecting the best formulation, to load the APIs in it to optimize the final emulgel. A design of experiments was introduced to study the effect of formulation variables on quality attributes (adhesion, phase separation by mechanical stress and viscosity) of the emulgels. Response surface methodology and desirability functions were applied for data analysis. After optimization, the final emulgel was further characterized by assay and in vitro release of APIs, attenuation of facial redness, and compared to commercially available metronidazole products regarding API release.Results: The final emulgel gradually released both APIs, reaching approximately 88% within the first 4 h, and their profiles were well described by the Higuchi model. Only a light attenuation effect to conceal facial redness was achieved.Conclusions: A metronidazole and niacinamide emulgel, also providing cosmetic assistance, was developed using QbD. The emulgel releases metronidazole faster than the creams, but more gradually than the commercially available gel, providing a realistic time frame of drug delivery in accordance with the expected time of residence of the adhesive emulgel over the affected facial area.
Assuntos
Géis/administração & dosagem , Géis/química , Rosácea/tratamento farmacológico , Química Farmacêutica/métodos , Cosméticos/administração & dosagem , Cosméticos/química , Sistemas de Liberação de Medicamentos/métodos , Liberação Controlada de Fármacos , Excipientes/química , Humanos , Metronidazol/administração & dosagem , Metronidazol/química , Niacinamida/administração & dosagem , Niacinamida/química , Viscosidade/efeitos dos fármacosRESUMO
Hexagonal liquid crystals and supramolecular polymers from meglumine-based supra-amphiphiles were developed as drug delivery systems to be applied on the skin. The influence of fatty acid unsaturation on the structure and mechanical properties was evaluated. Moreover, we have investigated the system biocompatibility and how the type of water could influence its bioadhesive properties. Meglumine-oleic acid (MEG-OA) was arranged as hexagonal liquid crystals at 30-70â¯wt% water content, probably due to its curvature and increased water solubility. Meglumine-stearic acid (MEG-SA) at 10-80â¯wt% water content self-assembled as a lamellar polymeric network, which can be explained by the low mobility of MEG-SA in water due to hydrophobic interactions between fatty acid chains and H-bonds between meglumine and water molecules. Both systems have shown suitable mechanical parameters and biocompatibility, making them potential candidates to encapsulate therapeutic molecules for skin delivery. Moreover, a strong positive correlation between the amount of unfrozen bound water in meglumine-based systems and the bioadhesion properties was observed. This work shows that a better understanding of the physicochemical properties of a drug delivery system is extremely important for the correlation with the desired biological response and, thus, improve the product performance for biomedical applications.
Assuntos
Sistemas de Liberação de Medicamentos , Meglumina/química , Pele/química , Tensoativos/química , Água/química , Adesão Celular , Linhagem Celular , Sobrevivência Celular/efeitos dos fármacos , Relação Dose-Resposta a Droga , Humanos , Meglumina/síntese química , Meglumina/farmacologia , Tamanho da Partícula , Relação Estrutura-Atividade , Propriedades de Superfície , Tensoativos/síntese química , Tensoativos/farmacologia , ViscosidadeRESUMO
As a new strategy for treatment of ductal carcinoma in situ, biocompatible and bioadhesive nanoemulsions for intraductal administration of the cytotoxic agent piplartine (piperlongumine) were optimized in this study. To confer bioadhesive properties, the nanoemulsion was modified with chitosan or hyaluronic acid. Tricaprylin was selected as the nanoemulsion non-polar phase due to its ability to dissolve larger drug amounts compared to isopropyl myristate and monocaprylin. Use of phosphatidylcholine as sole surfactant did not result in a homogeneous nanoemulsion, while its association with polysorbate 80 and glycerol (in a surfactant blend) led to the formation of nanoemulsions with droplet size of 76.5⯱â¯1.2â¯nm. Heating the aqueous phase to 50⯰C enabled sonication time reduction from 20 to 10â¯min. Inclusion of either chitosan or hyaluronic acid resulted in nanoemulsions with similar in vitro bioadhesive potential, and comparable ability to prolong mammary tissue retention (to 120â¯h) in vivo without causing undesirable histological alterations. Piplartine was stable in both nanoemulsions for 60â¯days; however, the size of loaded NE-HA was maintained at a similar range for longer periods of time, suggesting that this nanoemulsion may be a stronger candidate for intraductal delivery.
Assuntos
Antineoplásicos Fitogênicos/administração & dosagem , Dioxolanos/administração & dosagem , Glândulas Mamárias Animais/metabolismo , Nanopartículas/administração & dosagem , Piperidonas/administração & dosagem , Adesividade , Animais , Antineoplásicos Fitogênicos/química , Galinhas , Quitosana/administração & dosagem , Quitosana/química , Membrana Corioalantoide/efeitos dos fármacos , Dioxolanos/química , Vias de Administração de Medicamentos , Emulsões , Feminino , Glicerol/administração & dosagem , Glicerol/química , Ácido Hialurônico/administração & dosagem , Ácido Hialurônico/química , Nanopartículas/química , Fosfatidilcolinas/administração & dosagem , Fosfatidilcolinas/química , Piperidonas/química , Polissorbatos/administração & dosagem , Polissorbatos/química , Ratos Wistar , Pele/química , SuínosRESUMO
Mucoadhesion is a useful strategy for drug delivery systems, such as tablets, patches, gels, liposomes, micro/nanoparticles, nanosuspensions, microemulsions and colloidal dispersions. Moreover, it has contributed to many benefits like increased residence time at application sites, drug protection, increased drug permeation and improved drug availability. In this context, investigation into the mucoadhesive properties of pharmaceutical dosage forms is fundamental, in order to characterize, understand and simulate the in vivo interaction between the formulation and the biological substrate, contributing to the development of new mucoadhesive systems with effectiveness, safety and quality. There are a lot of in vivo, in vitro and ex vivo methods for the evaluation of the mucoadhesive properties of drug delivery systems. However, there also is a lack of standardization of these techniques, which makes comparison between the results difficult. Therefore, this work aims to show an overview of the most commonly employed methods for mucoadhesion evaluation, relating them to different proposed systems and using artificial or natural mucosa from humans and animals.
Assuntos
Sistemas de Liberação de Medicamentos/métodos , Lipossomos/química , Mucosa/química , Nanopartículas/química , Comprimidos/administração & dosagem , Adesividade , Animais , Química Farmacêutica , Humanos , Comprimidos/químicaRESUMO
The aim of the present work was to study the main formulation variables that influence attributes of bioadhesive emulgels based on a combination of polymers, using response surface methodology (RSM). Bioadhesive products continue to gain attention in topical cutaneous administration as they allow long residence times on the application site, which is important when a long dermal action and a reduced product administration frequency are desired. A Box-Behnken design of experiments (DoE) was introduced to study the effect of formulation variables on quality attributes of the emulgels. The effects of concentration of carbomer interpolymer type A (Polym1), xanthan gum (Polym2) and mineral oil (Oil) on detachment force (Fdetch), spreadability (Spread), and phase separation by mechanical stress (PhSep) were investigated. RSM and desirability functions were applied for data analysis. Emulgels were further characterized by viscosity and extrudability measurements. Polym1 showed a positive effect on Fdetch, while the increase in concentrations of Polym2 and Oil decreased this property. Polym1 and Polym2 favored emulgel PhSep. However, their interaction effect decreased it. The combination of 0.4-0.6% of carbomer and 0.2-0.3% of gum was able to produce easy-to-spread bioadhesive emulgels with mineral oil as discontinuous phase in the presence of a low surfactant concentration. Based on the DoE results, value ranges for the variables, which could achieve for the experimental domain to get the critical quality attributes of emulgels jointly within the specification limits, were able to be identified using RSM supported by desirability functions.
Assuntos
Emulsões/química , Hidrogéis/química , Resinas Acrílicas/química , Interpretação Estatística de Dados , Composição de Medicamentos , Polímeros/química , ViscosidadeRESUMO
ABSTRACT This study was to develop, characterize, and evaluate the physical-chemical stability, in vitro antioxidant activity and in vitro safety profile of liquid crystalline systems (LCS) and microemulsions (MEs) with and without organic cocoa (OC) extract. LCS stabilized by surfactant polyoxyethylene 20 cetyl ether, containing water and oleic acid were studied. LCS and MEs were characterized using polarized light microscopy, small angle X-ray scattering, rheology and in vitro bioadhesion, and were evaluated for a period of 30 days by visual aspects, centrifuge test, pH value and relative density. PLM and SAXS assays showed the presence of domains of MEs, cubic and hexagonal mesophasephases, varying the proportions of the components of the formulations; where in the addition of the extract did not change rheological behavior of the formulations. All of the formulations were stable in the period analyzed and presented higher bioadhesive strength. In vitro antioxidant activity suggests that LCS and MEs presented a high capacity to maintain the antioxidant activity of OC extract. The results showed that the incorporation of OC in LCS improved the safety profile, according to cytotoxicity assays of systems may be a promising platform to OC extract for topical application for the potential treatment of skin disorders.
Assuntos
Tensoativos , Cristais Líquidos/análise , Pele , Cacau/efeitos adversos , Sistemas de Liberação de Medicamentos , Microscopia de Polarização/métodosRESUMO
This study describes the investigation about the physicochemical behavior of methylene blue (Mb) addition to systems containing poloxamer 407 (Polox), Carbopol 934P (Carb), intended to be locally used by photodynamic therapy. A factorial design 23 (plus center point) was used to analyze the rheological, mucoadhesive and textural properties of the preparations. Systems containing the lower concentrations of Polox (15 and 17.5%, w/w) exhibited pseudoplastic flow and low degrees of rheopexy. On the other hand, at higher Polox concentration (20%, w/w) the systems display plastic flow and thixotropy. Carb and Mb exhibited a negative influence for the consistency and flow behavior index, due to the interaction between them. For most of the formulations, the increase of Polox and Mb content significantly increased storage modulus, loss modulus and dynamic viscosity. The systems display a sol-gel transition temperature, existing as a liquid at room temperature and gel at 29-37 °C. Increasing the temperature and the polymer concentration, the compressional properties of systems significantly increased. The mucoadhesion was noted to all formulations, except to systems composed by 15% (w/w) of Polox. The analyses enabled to understand and predict the performance of formulations and the polymer-Mb interactions, tailoring to the suit systems (Polox/Carb/Mb): 17.5/0.50/0.20 and 20/0.15/0.25.
RESUMO
ABSTRACT Liquid-Crystalline Systems represent active compounds delivery systems that may be able to overcome the physical barrier of the skin, especially represented by the stratum corneum. To obtain these systems, aqueous and oily components are used with surfactants. Of the different association structures in such systems, the liquid-crystalline offer numerous advantages to a topical product. This manuscript presents the development of liquid-crystalline systems consisting, in which the oil component is olive oil, its rheological characterizations, and the location of liquid crystals in its phase map. Cytotoxic effects were evaluated using J-774 mouse macrophages as the cellular model. A phase diagram to mix three components with different proportions was constructed. Two liquid crystalline areas were found with olive oil in different regions in the ternary diagram with two nonionic surfactants, called SLC1 (S1) and SLC2 (S2). These systems showed lamellar liquid crystals that remained stable during the entire analysis time. The systems were also characterized rheologically with pseudoplastic behavior without thixotropy. The texture and bioadhesion assays showed that formulations were similar statistically (p < 0.05), indicating that the increased amount of water in S2 did not interfere with the bioadhesive properties of the systems. In vitro cytotoxic assays showed that formulations did not present cytotoxicity. Olive oil-based systems may be a promising platform for skin delivery of drugs.
RESUMO Os cristais líquidos representam um sistema de liberação de substâncias ativas capazes de vencer a barreira cutânea, representada especialmente pelo estrato córneo. Água, óleo e tensoativos são misturados para se obter esses sistemas. Diferentes estruturas podem ser formadas nesses sistemas, as quais oferecem muitas vantagens para os produtos de uso tópico. Esse trabalho visou ao desenvolvimento de sistemas líquido-cristalinos preparados com óleo de oliva, sua caracterização reológica e a identificação das fases cristalinas no diagrama ternário. Efeitos citotóxicos foram avaliados usando células de rato como modelo celular. Construiu-se um diagrama de fases que mistura três componentes em diferentes proporções. Duas áreas de cristal líquido, denominadas SLC1 (S1) e SLC2 (S2), foram encontradas com óleo de oliva em diferentes regiões no diagrama ternário preparado com dois diferentes tensoativos não-iônicos. Esses sistemas mostraram fase cristalina lamelar, que permaneceu estável durante o tempo estudado. Os sistemas foram também caracterizados reologicamente e apresentaram comportamento pseudoplástico com tixotropia. Os ensaios de textura e bioadesão mostraram que as formulações foram similares (p < 0.05), indicando que o aumento da quantidade de água em S2 não interferiu nas propriedades bioadesivas dos sistemas. Os ensaios de citotoxicidade mostraram que as formulações não foram citotóxicas. Sistemas à base de óleo de oliva são interessantes para a liberação de fármacos na pele.
Assuntos
Nanotecnologia/métodos , Azeite de Oliva/uso terapêutico , Reologia/classificação , Cristais Líquidos/análise , Liberação Controlada de FármacosRESUMO
CONTEXT: Bioadhesiviness of polyacrylic acid polymers make them promising hydrogels to design topical drug delivery systems, allowing a close contact with biological substrate as well as an enhanced local concentration gradient, both factors that may improve the biological performance of the drugs. AIM: Texture and bioadhesive properties of hydrogels were assessed by using texture analyzer and they were correlated with their rheological behavior and performance as drug delivery systems. METHODS: Aqueous dispersions of both polymers were prepared at 0.5%, 1.0% and 1.5% w/v. Hardness, compressibility, adhesiveness, cohesiveness, bioadhesion, continuous flow, oscillatory dynamic test and in vitro drug release were evaluated. RESULTS: Rheological and texture parameters were dependent on polymer concentration and C974P polymer built the strongest structures. Both 1.5% hydrogels presented high bioadhesion values. About 50% of the metronidazole (MTZ) was sustained released from hydrogels within 2 h with an initial burst release at early stage. After, the release rates were decreased and 10% of the MTZ was released in the next 10 h. The drug release process was driven by Fickian diffusion and complex mechanism for PP and C974P hydrogels, respectively. CONCLUSION: The set of results demonstrated that these hydrogels are promising to be used as topical controlled drug delivery system.
Assuntos
Resinas Acrílicas/química , Anti-Infecciosos/administração & dosagem , Preparações de Ação Retardada/química , Hidrogéis/química , Metronidazol/administração & dosagem , Adesividade , Administração Tópica , Sistemas de Liberação de Medicamentos , Dureza , ReologiaRESUMO
Experiments were designed (1) to investigate the bioadhesion, biofilm formation, foxing, and micropitting in documentary collections, (2) to assess the risk of biodeterioration, (3) to investigate the environmental microbial concentration, and (4) to study the influence of environmental factors in biodeterioration of documentary heritage in three archives. The importance of this work in the field of biodeterioration of documentary heritage was verified by bioadhesion and biofilm formation by microorganisms isolated from the collections under study. Bacillus sp. and Scopulariopsis sp. isolated from paper books showed considerable evidence of attacking the paper structure and of pigment production, constituting a hazard to the loss of documentary heritage.
Assuntos
Bacillus/fisiologia , Incrustação Biológica , Papel , Scopulariopsis/fisiologia , Microbiologia do Ar , Bacillus/genética , Bacillus/isolamento & purificação , Aderência Bacteriana , Biofilmes , Contagem de Colônia Microbiana , Monitoramento Ambiental , Fungos , Scopulariopsis/genética , Scopulariopsis/isolamento & purificaçãoRESUMO
The objective of the current study was to formulate mucoadhesive controlled release matrix tablets of flurbiprofen and to optimize its drug release profile and bioadhesion using response surface methodology. Tablets were prepared via a direct compression technique and evaluated for in vitro dissolution parameters and bioadhesive strength. A central composite design for two factors at five levels each was employed for the study. Carbopol 934 and sodium carboxymethylcellulose were taken as independent variables. Fourier transform infrared (FTIR) spectroscopy studies were performed to observe the stability of the drug during direct compression and to check for a drug-polymer interaction. Various kinetic models were applied to evaluate drug release from the polymers. Contour and response surface plots were also drawn to portray the relationship between the independent and response variables. Mucoadhesive tablets of flurbiprofen exhibited non-Fickian drug release kinetics extending towards zero-order, with some formulations (F3, F8, and F9) reaching super case II transport, as the value of the release rate exponent (n) varied between 0.584 and 1.104. Polynomial mathematical models, generated for various response variables, were found to be statistically significant (P<0.05). The study also helped to find the drug's optimum formulation with excellent bioadhesive strength. Suitable combinations of two polymers provided adequate release profile, while carbopol 934 produced more bioadhesion.
O objetivo do presente estudo foi formular comprimidos mucoadesivos de flurbiprofeno, de liberação controlada, e otimizar o perfil da liberação do fármaco e a bioadesão, utilizando a metodologia de superfície de resposta. Prepararam-se os comprimidos via técnica de compressão direta, que foram avaliados in vitro quanto aos parâmetros de dissolução e da força bioadesiva. Planejamento com componente central para dois fatores em cinco níveis cada foi empregado para esse estudo. Carbopol 934 e carboximetilcelulose sódica foram tomados como variáveis independentes. Efetuaram-se estudos de espectroscopia por transformada de Fourier (FTIR) para observar a estabilidade do fármaco durante a compressão direta e para avaliar a interação a fármaco-polímero. Aplicaram-se vários métodos cinéticos para avaliar a liberação do fármaco dos polímeros. Gráficos de superfície de contorno e de resposta foram efetuados para retratar a relação entre as variáveis dependentes e a resposta. Os comprimidos mucoadesivos de flurbiprofeno apresentaram cinética de liberação não-fickiana, estendendo para ordem zero, para algumas formulações (F3, F8 e F9), alcançando transporte super caso II, à medida que o valor do expoente (n) de taxa de liberação variou entre 0,584 e 1,104. Modelos matemáticos polinomiais, gerados por diversas variáveis de resposta, foram estatisticamente, significativos (P<0,05). O estudo também auxiliou a encontrar a formulação ótima do fármaco, com excelente força de bioadesão. Combinações adequadas dos dois polímeros resultaram em perfis de liberação adequado, sendo que o Carbopol 934 produziu mais adesão.
Assuntos
Comprimidos/análise , Técnicas In Vitro/métodos , Flurbiprofeno/análise , Liberação Controlada de Fármacos , Métodos , Química Farmacêutica/classificaçãoRESUMO
The compressional, mechanical and bioadhesive properties of tablet formulations incorporating a new gum obtained from the incised trunk of the Cedrela odorata tree were evaluated and compared with those containing hydroxypropylmethylcellulose (HPMC). Compressional properties were evaluated using Hausner's ratio, Carr's Index, the angle of repose, and Heckel, Kawakita and Gurnham plots. Ibuprofen tablets were prepared using the wet granulation method. Bioadhesive studies were carried out using the rotating cylinder method in either phosphate buffer pH 6.8 or 0.1 M hydrochloric acid media. The gum is a low viscosity polymer (48 cPs), and Fourier transform infrared spectroscopy revealed the presence of a hydroxyl group. Py and Pk values, which are measures of plasticity, showed the gum to be significantly (p<0.05) more plastic than HPMC, and plasticity increased with polymer concentration. All tablet formulations were non-friable (<1.0%), and the formulations containing the gum had a higher crushing strength (130.95 N) than those containing HPMC (117.85 N) at 2.0% w/w binder. Formulations incorporating the gum were non-disintegrating and had a significantly longer drug release time than those containing HPMC. At the highest binder concentration, Cedrela gum formulations adhered to incised pig ileum longer than those containing HPMC. Cedrela gum exhibited better compressive, flow and binding properties than HPMC and is suitable as a bioadhesive and for sustained release of drugs.
Propriedades de compressão, mecânicas e de formulações de comprimidos bioadesivos, que incorporam nova goma de mascar obtidas a partir de incisão de tronco da árvore de Cedrela odorata, foram avaliadas e comparadas com aquelas contendo hidroxipropilmetilcelulose (HPMC). Propriedades de compressão foram avaliadas usando a razão de Hausner, índice de Carr, ângulo de repouso e os gráficos de Heckel, Kawakita e Gurnham. Prepararam-se comprimidos de ibuprofeno utilizando o método de granulação a úmido. Realizaram-se estudos de bioadesividade utilizando o método de cilindro rotativo em tampão fosfato pH 6,8, ou meio ácido com 0,1 M de ácido clorídrico. A goma é um polímero de baixa viscosidade (48 cPs) e a espectroscopia no infravermelho por Transformada de Fourier (FTIR) revelou a presença de um grupo hidroxila. Valores de Py e Pk, que são medidas de plasticidade, mostraram que a goma é significativamente (p <0,05) mais plástica do que HPMC e que a plasticidade aumenta com a concentração de polímero. Todas as formulações de comprimidos mostraram-se não-friáveis (<1,0%) e aquelas contendo a goma apresentaram maior resistência ao esmagamento (130.95N) do que aquelas contendo HPMC (117.85N) em 2,0% (p/p) do ligante. As formulações que incorporaram a goma eram não-desintegrantes e apesentaram tempo de liberação significativamente maior do que aquelas contendo HPMC. As formulações de goma de Cedrela aderiram à incisão de íleo de porco por tempo maior do que aquelas contendo HPMC com a maior concentração de ligante. A goma Cedrela apresentou melhor fluxo, compressão e propriedades de ligação do que HPMC e é adequada como bioadesivo e para a liberação sustentada de fármacos.
Assuntos
Comprimidos/análise , Ibuprofeno/análise , Cedrela/classificação , Ligantes , Química Farmacêutica/instrumentaçãoRESUMO
The aim of present study was to develop and evaluate buccoadhesive Quetiapine Fumarate (QF) tablets, which is extensively metabolised by liver. Buccoadhesive tablets of QF were prepared using HPMC K4M, HPMC K15M and combination of carbopol and HPC as mucoadhesive polymers by direct compression method. Sodium deoxycholate was added to formulation to improve the permeation of drug. The formulations were tested for bioadhesion strength, ex vivo residence time, swelling time and in vitro dissolution studies and ex vivo permeation studies. Optimized formulation (F3) showed 92% in vitro release in 8 h and 67% permeation of drug through porcine buccal mucosa and followed fickian release mechanism with zero order kinetics. FTIR studies of optimized formulation showed no evidence of interaction between the drug and polymers. In vivo mucoadhesive behaviour of optimized formulation was performed and subjective parameters were evaluated.
O objetivo do presente estudo foi desenvolver e avaliar os comprimidos bucoadesivos de fumarato de quetiapina (FQ), que é extensivamente metabolizada no fígado. Os comprimidos bucoadesivos de FQ foram preparados utilizando-se HPMC K4M, HPMC K15M e a combinação de carbopol e HPC como polímeros mucoadesivos pelo método de compressão direta. O desoxicolato de sódio foi adicionado à formulação para melhorar a permeação do fármaco. As formulações foram testadas quanto à força de bioadesão, tempo de residência ex vivo, tempo de inchamento, dissolução in vitro e permeação ex vivo. A formulação otimizada (F3) mostrou 92% de liberação in vivo em 8 h e 67% de permeação do fármaco através da mucosa bucal de porco e seguiu o mecanismo fickiano de liberação com cinética de ordem zero. Os estudos de FTIR da formulação otimizada não mostraram evidência da interação entre o fármaco e os polímeros. O comportamento mucoadesivo in vivo da formulação otimizada foi efetuado e avaliaram-se os parâmetros subjetivos.