RESUMO

The hydrothermal pretreatment process stands out as a pivotal step in breaking down the hemicellulosic fraction of lignocellulosic biomasses, such as sugarcane bagasse and eucalyptus sawdust. This pretreatment step is crucial for preparing these materials for subsequent processes, particularly in food applications. This technique aims to disintegrate plant wall components like cellulose, hemicellulose, and lignin, and facilitating access in later phases such as enzymatic hydrolysis, and ultimately making fermentable sugars available. In this study, sugarcane bagasse and eucalyptus sawdust biomass underwent hydrothermal pretreatment at specific conditions, yielding two key components: dry biomass and hemicellulose liquor. The primary focus was to assess the impact of hydrothermal pretreatment followed by enzymatic hydrolysis, using the Celic Ctec III enzyme cocktail, to obtain fermentable sugars. These sugars were then transformed into membranes via strain Gluconacetobacter xylinus bacterial biosynthesis. Notably, the addition of a nitrogen source significantly boosted production to 14.76 g/ in hydrolyzed sugarcane bagasse, underscoring its vital role in bacterial metabolism. Conversely, in hydrolyzed eucalyptus, nitrogen source inclusion unexpectedly decreased yield, highlighting the intricate interactions in fermentation media and the pivotal influence of nitrogen supplementation. Characterization of membranes obtained in synthetic and hydrolyzed media through techniques such as FEG-SEM, FTIR, and TGA, followed by mass balance assessment, gauged their viability on an industrial scale. This comprehensive study aimed not only to understand the effects of pretreatment and enzymatic hydrolysis but to also evaluate the applicability and sustainability of the process on a large scale, providing crucial insights into its feasibility and efficiency in practical food-related scenarios, utilizing nanocellulose bacterial (BNC) as a key component.

Assuntos

RESUMO

Bacterial nanocellulose (BNC) is a sustainable, renewable, and eco-friendly nanomaterial, which has gained great attentions in both academic and industrial fields. Two bacterial nanocellulose-producing strains (CVV and CVN) were isolated from apple vinegar sources, presenting high 16S rRNA gene sequence similarities (96%-98%) with Komagataeibacter species. The biofilm was characterized by scanning electron microscopy (SEM), revealing the presence of rod-shaped bacteria intricately embedded in the polymeric matrix composed of nanofibers of bacterial nanocellulose. FTIR spectrum and XRD pattern additionally confirmed the characteristic chemical structure associated with this material. The yields and productivities achieved during 10 days of fermentation were compared with Komagataeibacter xylinus ATCC 53524, resulting in low levels of BNC production. However, a remarkable increase in the BNC yield was achieved for CVV (690% increase) and CVN (750% increase) strains at day 6 of the fermentation upon adding 22 mM citrate buffer into the medium. This effect is mainly attributed to the buffering capacity of the modified Yakamana medium, which allowed to maintain pH close to 4.0 until day 6, though in combination with additional factors including stimulation of the gluconeogenesis pathway and citrate assimilation as a carbon source. In addition, the productivities determined for both isolated strains (0.850 and 0.917 g L-1 d-1) compare favorably to previous works, supporting current efforts to improve fermentation performance in static cultures and the feasibility of scaling-up BNC production in these systems.

RESUMO

In the current contribution, bacterial nanocellulose obtained from a by-product of Kombucha tea production and vegetal nanocellulose isolated from milled rice husks were employed as fillers of PLA-based composites prepared by intensive mixing followed by compression molding. Given the challenges associated with the incorporation of nanocelluloses-initially obtained as aqueous suspensions-into melt compounding processes, and also with achieving a proper dispersion of the hydrophilic nanofillers within PLA, three different nanofibrils incorporation strategies were studied: i.e., direct mixing of dried milled nanocelluloses and PLA; masterbatching by solvent casting of native nanocelluloses followed by melt compounding; and masterbatching by solvent casting of acetylated nanocelluloses followed by melt compounding. Composites with varying filler content (from 0.5 wt.% to 7 wt.%) were characterized in terms of morphology, optical properties, and mechanical performance. Results revealed the relative suitability of each strategy employed to promote nanocelluloses dispersion within the PLA matrix. PLA/nanocellulose masterbatches prepared by solvent casting proved to be particularly useful for feeding the nanocelluloses into the processing equipment in a dry state with limited hornification. Acetylation also contributed to a better dispersion of both nanocelluloses within the PLA matrix, although no clear positive impact on the mechanical properties of the films was observed. Finally, filler loading played an important role in the films' properties by increasing their stiffness while reducing their translucency.

RESUMO

Interest in bacterial nanocellulose (BNC) has grown due to its purity, mechanical properties, and biological compatibility. To address the need for alternative carbon sources in the industrial production of BNC, this study focuses on banana leaves, discarded during harvesting, as a valuable source. Banana midrib juice, rich in nutrients and reducing sugars, is identified as a potential carbon source. An optimal culture medium was designed using a simplex-centroid mixing design and evaluated in a 10 L bioreactor. Techniques such as Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA) were used to characterize the structural, thermal, and morphological properties of BNC. Banana midrib juice exhibited specific properties, such as pH (5.64), reducing sugars (15.97 g/L), Trolox (45.07 µM), °Brix (4.00), and antioxidant activity (71% DPPH). The model achieved a 99.97% R-adjusted yield of 6.82 g BNC/L. Physicochemical analyses revealed distinctive attributes associated with BNC. This approach optimizes BNC production and emphasizes the banana midrib as a circular solution for BNC production, promoting sustainability in banana farming and contributing to the sustainable development goals.

RESUMO

Current efforts in stomach-related drug design focus on improving drug bioavailability within the gastric region. Bacterial nanocellulose (BNC) has been established as a suitable material for drug delivery systems; however, it lacks adhesion to the gastric environment. This limitation can be addressed by leveraging the mucoadhesive properties of low molecular weight chitosan (LMWC). Therefore, we aimed to develop mucoadhesive capsules constructed from BNC coated with crosslinked LMWC, intended for targeted drug delivery in the gastric region. The capsules were characterized using scanning electron microscopy, infrared spectroscopy, thermogravimetric analysis, and mucoadhesion assessments. Under acidic conditions, crosslinked chitosan exhibited enhanced swelling relative to neutral conditions. The coating of chitosan onto the BNC fibrillar network of the capsules resulted in the superimposition of vibration bands and enhanced thermal stability. Furthermore, the capsules exhibited significant mucoadhesive properties in the gastric environment, with an attachment force measuring 89.151 ± 6.226 mN. To validate the efficacy of the system, we utilized antioxidant turmeric extract (TE) as a bioactive compound with chemopreventive potential against stomach cancer. TE was adsorbed onto BNC in a reversible multilayer system, enabling controlled adsorption and desorption. These findings highlight the significance of developing mucoadhesive capsules as a tailored drug delivery system for gastric conditions, particularly in the context of treating stomach diseases as cancer.

RESUMO

Bacterial nanocellulose (BNC) has a negative surface charge in physiological environments, which allows the adsorption of calcium ions to initiate the nucleation of different calcium phosphate phases. The aim of this study was to investigate different methods of mineralization in three-dimensional microporous bacterial nanocellulose with the intention of mimicking the composition, structure, and biomechanical properties of natural bone. To generate the 3D microporous biomaterial, porogen particles were incorporated during BNC fermentation with the Komagataeibacter medellinensis strain. Calcium phosphates (CPs) were deposited onto the BNC scaffolds in five immersion cycles, alternating between calcium and phosphate salts in their insoluble forms. Scanning electron microscopy (SEM) showed that the scaffolds had different pore sizes (between 70 and 350 µm), and their porous interconnectivity was affected by the biomineralization method and time. The crystals on the BNC surface were shown to be rod-shaped, with a calcium phosphate ratio similar to that of immature bone, increasing from 1.13 to 1.6 with increasing cycle numbers. These crystals also increased in size with an increasing number of cycles, going from 25.12 to 35.9 nm. The main mineral phase observed with X-ray diffraction was octacalcium dihydrogen hexakis phosphate (V) pentahydrate (OCP). In vitro studies showed good cellular adhesion and high cell viability (up to 95%) with all the scaffolds. The osteogenic differentiation of human bone marrow mesenchymal stem cells on the scaffolds was evaluated using bone expression markers, including alkaline phosphatase, osteocalcin, and osteopontin. In conclusion, it is possible to prepare 3D BNC scaffolds with controlled microporosity that allow osteoblast adhesion, proliferation, and differentiation.

RESUMO

This paper presents the results obtained from the chemical activation of bacterial nanocellulose (BCN) using fique juice as a culture medium. BNC activation (BNCA) was carried out with H3PO4 and KOH at activation temperatures between 500 °C to 800 °C. The materials obtained were characterized morphologically, physicochemically, superficially, and electrochemically, using scanning electron microscopy, X-ray photoelectron spectroscopy (XPS), the physisorption of gases N2 and CO2 at 77 K and 273 K, respectively, cyclic voltammetry, chronopotentiometry, and electrochemical impedance spectroscopy (EIS). The samples activated with H3PO4 presented specific surface areas (SBET) around 780 m2 g-1, while those activated with KOH values presented specific surface areas between 680 and 893 m2 g-1. The XPS analysis showed that the PXPS percentage on the surface after H3PO4 activation was 11 wt%. The energy storage capacitance values ranged between 97.5 F g-1 and 220 F g-1 by EIS in 1 M H2SO4. The samples with the best electrochemical performance were activated with KOH at 700 °C and 800 °C, mainly due to the high SBET available and the accessibility of the microporosity. The capacitance of BNCAs was mainly improved by electrostatic effects due to the SBET rather than that of pseudocapacitive ones due to the presence of phosphorus heteroatoms.

RESUMO

With the aim of contributing to the development of more efficient materials for wound care, new topical formulations based on bacterial nanocellulose (BNC) hydrogels containing propolis were produced. Characterizations confirmed the incorporation of propolis into the BNC matrix, maintaining its structure and properties. Rheological analysis confirmed that the hydrogels showed thixotropic behavior appropriate for topical application. Chromatographic profiles showed sustained release of propolis biomarkers for at least 20 h. The formulations did not present mutagenicity. For application in photodynamic inactivation (PDI), BNC/propolis hydrogels were prepared with the photosensitizers methylene blue (MB). Spectroscopy and confocal fluorescence microscopy confirmed the interaction of MB and propolis in BNC hydrogels, as well as the formation of a new composite material. In the antibacterial assays, formulations containing MB and propolis significantly reduced Staphylococcus aureus growth. In the presence of light, BNC/MB hydrogels completely inhibited the microorganism. Therefore, the results suggest potential materials for the prevention or treatment of Staphylococcus aureus infections in wounds.

RESUMO

As the development of nanotechnology progresses, organic electronics have gained momentum in recent years, and the production and rapid development of electronic devices based on organic semiconductors, such as organic light-emitting diodes (OLEDs), organic photovoltaic cells (OPVs), and organic field effect transistors (OFETs), among others, have excelled. Their uses extend to the fabrication of intelligent screens for televisions and portable devices, due to their flexibility and versatility. Lately, great efforts have been reported in the literature to use them in the biomedical field, such as in photodynamic therapy. In tandem, there has been considerable interest in the design of advanced materials originating from natural sources. Bacterial nanocellulose (BNC) is a natural polymer synthesized by many microorganisms, notably by non-pathogenic strains of Komagataeibacter (K. xylinus, K. hansenii, and K. rhaeticus). BNC shows distinct physical and mechanical properties, including its insolubility, rapid biodegradability, tensile strength, elasticity, durability, and nontoxic and nonallergenic features, which make BNC ideal for many areas, including active and intelligent food packaging, sensors, water remediation, drug delivery, wound healing, and as conformable/flexible substrates for application in organic electronics. Here, we review BNC production methods, properties, and applications, focusing on electronic devices, especially OLEDs and flexible OLEDs (FOLEDs). Furthermore, we discuss the future progress of BNC-based flexible substrate nanocomposites.

RESUMO

Electrochemical biosensing devices are known for their simple operational procedures, low fabrication cost, and suitable real-time detection. Despite these advantages, they have shown some limitations in the immobilization of biochemicals. The development of alternative materials to overcome these drawbacks has attracted significant attention. Nanocellulose-based materials have revealed valuable features due to their capacity for the immobilization of biomolecules, structural flexibility, and biocompatibility. Bacterial nanocellulose (BNC) has gained a promising role as an alternative to antifouling surfaces. To widen its applicability as a biosensing device, BNC may form part of the supports for the immobilization of specific materials. The possibilities of modification methods and in situ and ex situ functionalization enable new BNC properties. With the new insights into nanoscale studies, we expect that many biosensors currently based on plastic, glass, or paper platforms will rely on renewable platforms, especially BNC ones. Moreover, substrates based on BNC seem to have paved the way for the development of sensing platforms with minimally invasive approaches, such as wearable devices, due to their mechanical flexibility and biocompatibility.

Assuntos

RESUMO

Genistein is an isoflavone with antioxidant, anti-inflammatory, and anticancer properties. That said, its use in the industry is limited by its low solubility in aqueous systems. In this work, bacterial nanocellulose (BNC) and BNC modified with cetyltrimethylammonium (BNC-CTAB) were evaluated as genistein-encapsulating materials for their controlled release in cancer chemoprevention. Thin films were obtained and characterized by contact angle, AFM, TEM, UV-Vis spectroscopy FTIR, and TGA techniques to verify surface modification and genistein encapsulation. The results show a decrease in hydrophilization degree and an increase in diameter after BNC modification. Furthermore, the affinity of genistein with the encapsulating materials was determined in the context of monolayer and multilayer isotherms, thermodynamic parameters and adsorption kinetics. Spontaneous, endothermic and reversible adsorption processes were found for BNC-GEN and BNC-CTAB-GEN. After two hours, the maximum adsorption capacity corresponded to 4.59 mg GEN∙g-1 BNC and 6.10 mg GEN∙g-1 BNC-CTAB; the latter was a more stable system. Additionally, in vitro release assays performed with simulated gastrointestinal fluids indicated controlled and continuous desorption in gastric and colon fluids, with a release of around 5% and 85%, respectively, for either system. Finally, the IC50 tests made it possible to determine the amounts of films required to achieve therapeutic concentrations for SW480 and SW620 cell lines.

Assuntos

RESUMO

Colorectal cancer (CRC) is the third most common worldwide. Its treatment includes adjuvant chemotherapy with 5-fluorouracil (5FU) administered intravenously. 5FU is an antineoplastic drug of the fluoropyrimidines group, widely used in the treatment of solid tumors, mainly CRC. Nevertheless, it causes several adverse effects and poor effectiveness due to its short half-life. This work aimed to employ bacterial nanocellulose (BNC) as an encapsulation material for the oral administration of 5FU. First, the adsorption phenomena were analyzed by isotherms, thermodynamic parameters, and kinetic models. Then, encapsulation was carried out using spray-drying, and encapsulated 5FU desorption profiles were assessed in simulated fluids. The biological behavior was evaluated on colon cancer SW480 and SW620 cell lines. As result, it was found that at 25 °C a monolayer of 5FU was formed and the process showed to be the most spontaneous one. In the characterization of the nanocapsules, important changes were detected by the presence of 5FU. The delivery in the colon corresponded to a controlled release behavior. The in vitro assay indicated an improvement in the toxicity effect of the drug and its mechanism of action. Accordingly, BNC is a promising biomaterial for the development of a colon drug delivery platform of 5FU.

Assuntos

RESUMO

Bacterial nanocellulose (BNC) is a novel nanomaterial known for its large surface area, biocompatibility, and non-toxicity. BNC contributes to regenerative processes in the skin but lacks antimicrobial and anti-inflammatory properties. Herein, the development of bioactive wound dressings by loading antibacterial povidone-iodine (PVI) or anti-inflammatory acetylsalicylic acid (ASA) into bacterial cellulose is presented. BNC is produced using Hestrin-Schramm culture media and loaded via immersion in PVI and ASA. Through scanning electron microscopy, BNC reveals open porosity where the bioactive compounds are loaded; the mechanical tests show that the dressing prevents mechanical wear. The loading kinetic and release assays (using the Franz cell method) under simulated fluids present a maximum loading of 589.36 mg PVI/g BNC and 38.61 mg ASA/g BNC, and both systems present a slow release profile at 24 h. Through histology, the complete diffusion of the bioactive compounds is observed across the layers of porcine skin. Finally, in the antimicrobial experiment, BNC/PVI produced an inhibition halo for Gram-positive and Gram-negative bacteria, confirming the antibacterial activity. Meanwhile, the protein denaturation test shows effective anti-inflammatory activity in BNC/ASA dressings. Accordingly, BNC is a suitable platform for the development of bioactive wound dressings, particularly those with antibacterial and anti-inflammatory properties.

RESUMO

Low-cost sensors to detect cancer biomarkers with high sensitivity and selectivity are essential for early diagnosis. Herein, an immunosensor was developed to detect the cancer biomarker p53 antigen in MCF7 lysates using electrical impedance spectroscopy. Interdigitated electrodes were screen printed on bacterial nanocellulose substrates, then coated with a matrix of layer-by-layer films of chitosan and chondroitin sulfate onto which a layer of anti-p53 antibodies was adsorbed. The immunosensing performance was optimized with a 3-bilayer matrix, with detection of p53 in MCF7 cell lysates at concentrations between 0.01 and 1000 Ucell. mL-1, and detection limit of 0.16 Ucell mL-1. The effective buildup of the immunosensor on bacterial nanocellulose was confirmed with polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and surface energy analysis. In spite of the high sensitivity, full selectivity with distinction of the p53-containing cell lysates and possible interferents required treating the data with a supervised machine learning approach based on decision trees. This allowed the creation of a multidimensional calibration space with 11 dimensions (frequencies used to generate decision tree rules), with which the classification of the p53-containing samples can be explained.

Assuntos

RESUMO

Treatments of postsurgical dehorning in cattle usually includes topical application of healing agents in wounds. The Bacterial Nanocellulose (BNC) may come to a complementary treatment for these wounds. Two new complementary treatments with BNC and BNC loaded with nisin were evaluated for wound healing in surgical dehorning in bovine. Hence, two groups of experiments were run, and 12 animals were used in each group. All animals, in right and left horns, received antisepsis treatment. For the first group, the left horn was the control, and on the right one the BNC was applied. For the second group, BNC was applied on the left horn (control) and on the right ones BNC+nisin was applied. In both experiments, wounds were evaluated macroscopically by photographic images and microscopically by histology. For macroscopic evaluations, a significant difference was observed over time, but only in the comparison within the same groups. Microscopic analyzes did not showed significant differences in any type of comparison. In conclusion, there was a clinical improvement in the wound healing response with the application of BNC. However, there was no significant difference between BNC compared to the nisin loaded in BNC. For the first time it was applied a BNC in surgical dehorning wounds in bovines and evaluated the efficacy of treatment in a real animal handling situation.

RESUMO

The interactions between films of bacterial nanocellulose (BNC) and B complex vitamins were studied using a Quartz Crystal Microbalance with Dissipation monitoring (QCM-D). Thin films of BNC were generated in situ by QCM-D, followed by real-time measurements of the vitamin adsorption. The desorption of vitamins was induced by rinsing the system using phosphate buffers at a pH of 2 and 6.5, emulating gastric conditions. Changes in frequency (which are proportional to changes in adsorbed mass, ∆m) detected by QCM-D were used to determine the amounts of vitamin adsorbed and released from the BNC film. Additionally, changes in dissipation (∆D) were proven to be useful in identifying the effects of the pH in both pristine cellulose films and films with vitamin pre-adsorbed, following its changes during release. The effects of pH on the morphology of the vitamin-BNC surfaces were also monitored by changes in rugosity from images obtained by atomic force microscopy (AFM). Based on this data, we propose a model for the binding phenomena, with the contraction on the relaxation of the cellulose film depending on pH, resulting in an efficient vitamin delivery process.

Assuntos

RESUMO

In this study, the effect of bioreactor size was evaluated with respect to the production and characteristics of the nanocellulose membranes produced by two different bioreactors: one with an 1800 cm2 cross-sectional area (BC-B44) and a lab-scale bioreactor with a 41 cm2 cross-sectional area (BC-B1). The culture conditions were kept the same, and the substrate consisted of overripe bananas, which are inexpensive because they are unsuitable for human consumption. The X-ray diffraction pattern showed that the two samples had similar crystalline structures, but changes were observed at the morphological level in the nanofibers that make up the BNC membranes. These changes generated, in turn, variations in the mechanical and thermal properties of the samples. This result represents a novel scale-up effect related to the static mode fermentation of BNC.

Assuntos

RESUMO

During the last two decades cellulosic nanomaterials have been the subject of much research around the world. Moreover, in the last few years, increasing industrial interest on the field enabled the setting-up of the first facilities producing commercial quantities of nanocelluloses; whereas a number of inventions involving cellulose nano-objects are claimed every year. In this context, the current article describes the recent evolution (from 2010 till 2017) of published patents which explicitly include in their title, abstract and/or claims references to cellulose nano-objects such as cellulose nanocrystals, cellulose nanofibrils and bacterial nanocellulose. Results evidence the astonishing increase in nanocellulose patents since 2010, and specially within the last three years surveyed (i.e. 2015-2017), when published documents accounted for ca. 70 % of the total number of patents published since 2010. Besides patent timelines, data is analysed in terms of patent owners, countries of application, and citing number.

RESUMO

Bacterial nanocellulose (BNC) is a natural polymer composed of glucose units with an important application as a two and three-dimensional scaffold for tissue engineering. However, as a polysaccharide, BNC does not have the biological signals of protein biomaterials. Therefore, this paper aims to develop a novel methodology to biomimic soft extracellular matrix (ECM) chemistry on to 3D BNC using the bioengineering of fibroblasts (the cells responsible for producing and regenerating the ECM) to immobilise adhesion proteins such as collagen and fibronectin. Modified 3D BNC (Mod-BNC) biomaterials were morphologically, thermally, and chemically characterised, and furthermore, the cell response was analysed by adhesion studies using atomic force microscopy (AFM), XTT assay, and confocal microscopy. Cell-derived proteins were deposited on the BNC nanoribbon network to modify its surface. The contact angle was increased from 40° to 60°, reducing the wettability of the biomaterial, and during thermogravimetry, the proteins in Mod-BNC exhibited an enhanced thermal stability because of the interactions between themselves and BNC. Chemical and immunocytochemistry analyses confirmed the presence of collagen type I and fibronectin on 3D BNC. These proteins activate integrin adhesion pathways that generate stronger cell adhesions. AFM experiments showed higher forces and energies on modified biomaterials, and moreover, the cells that adhered on to Mod-BNC exhibited higher mitochondrial activity and higher cell populations per cubic millimetre than non-modified surfaces (NMod-BNC). Accordingly, it was established that this novel methodology is robust and able to biomimic the chemical surface of soft ECM and immobilise cell-derived adhesion proteins from fibroblast; moreover, the Mod-BNC exhibited better cell response than NMod-BNC because of the biological signals in 3D BNC.

Assuntos

RESUMO

Despite the efforts focused on manufacturing biological engineering scaffolds for tissue engineering and regenerative medicine, a biomaterial that meets the necessary characteristics for these applications has not been developed to date. Bacterial nanocellulose (BNC) is an outstanding biomaterial for tissue engineering and regenerative medicine; however, BNC's applications have been focused on two-dimensional (2D) medical devices, such as wound dressings. Given the need for three-dimensional (3D) porous biomaterials, this work evaluates two methods to generate (3D) BNC scaffolds. The structural characteristics and physicochemical, mechanical, and cell behaviour properties were evaluated. Likewise, the effects of the pore size and surface area in the mechanical performance of BNC biomaterials and their cell response in a fibroblast cell line are discussed for the first time. In this study, a new method is proposed for the development of 3D BNC scaffolds using paraffin wax. This new method is less time-consuming, more robust in removing the paraffin and less aggressive toward the BNC microstructure. Moreover, the biomaterial had regular porosity with good mechanical behaviour; the cells can adhere and increase in number without overcrowding. Regarding the pore size and surface area, highly interconnected porosities (measuring approximately 60 µm) and high surface area are advantageous for the biomaterial's mechanical properties and cell behaviour. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 348-359, 2019.

Assuntos