RESUMO

The prompt detection of diseases hinges on the accessibility and the capability to identify relevant biomarkers. The integration of aptamers and the incorporation of nanomaterials into signal transducers have not only expedited but also enhanced the development of nanoaptasensors, enabling heightened sensitivity and selectivity. Here, the bimetallic nickel-cobalt-porphyrin metal-organic framework ((Ni + Cu)TPyP MOF) is regarded as an electron mediator, immobilization platform for an Alzheimer aptamer and to increase the electrochemical signal for the detection of the main biomarker of Alzheimer's disease (AD), amyloid ß (Aß-42). Furthermore, the ((Ni + Cu)TPyP MOF) was combined with reduced graphene oxide (rGO) and gold nanoparticles (AuNPs), on a gold electrode (GE) to provide an efficient interface for immobilizing aptamer strands. Concurrently, the incorporation of rGO and AuNPs imparts enhanced electrical conductivity and efficacious catalytic activity, establishing them as adept electrochemical indicators. Owing to the superior excellent electrical conductivity of rGO and AuNPs, coupled with the presence of ample mesoporous channels and numerous Ni and Cu metal sites within (Ni + Cu)TPyP MOF, this nanostructure with abundant functional groups is proficient in immobilizing a substantial quantity of aptamer. These interactions are achieved through robust π-π stacking and electrostatic interactions, alongside the high affinity between the thiol group of the aptamer and AuNPs concurrently. The as-prepared ternary (Au@(Ni + Cu)TPyP MOF/rGO) nanostructure electrode exhibited an enhancement in its electrochemically active surface area of about 7 times, compared with the bare electrode and the Aß-42 redox process is highly accelerated, so the peak currents are significantly higher than those obtained with bare GE substrate. Under the optimized conditions, the designed aptasensor had the quantitative detection of Aß-42 with a low detection limit of 48.6 fg mL-1 within the linear range of 0.05 pg mL-1 to 5 ng mL-1 by differential pulse voltammetry (DPV), accompanied by precise reproducibility, satisfactory stability (95.6% of the initial activity after 10 days), and minimal impact of interfering agents. Recorded results in human blood plasma demonstrated the high efficacy of porphyrin MOF system sensing even in the clinical matrix. The great performance of this aptasensor indicates that our new design of Au@(Ni + Cu)TPyP MOF/rGO nanostructure provides more opportunities for the detection of chemical signals in early diagnosis of Alzheimer's disease.

Assuntos

RESUMO

Alzheimer's disease (AD) is considered one of the main progressive chronic diseases in elderly individuals. Early diagnosis using related biomarkers, specifically beta-amyloid peptide (Aß), allows finding expected treatment routes. Here, we developed an electrochemical aptasensing platform for AD by employing a glassy carbon electrode (GCE) modified with a layer of jagged gold (JG) nanostructure (diameter: 60-185 nm) and graphene oxide-carboxylic acid functionalized multiwalled carbon nanotubes (GO-c-MWCNTs) nanocomposite. These surface modifications acted as the signal amplifier and provided an optimum nano-interface substrate for immobilizing aptamer strands. The measurements of Aß were performed via differential pulse voltammetry (DPV), and the aptasensor detected the analyte in a linear range from 0.1 pg mL-1 to 1 ng mL-1, with an estimated limit of detection (LOD) of about 0.088 pg mL-1 (S/N = 3). The aptasensor showed sufficient stability (11 days), reversibility (three times), and reproducibility (five times re-fabrication with relative standard deviation (RSD): 1.27). The potential interfering agents showed negligible impact on the sensing performance. Finally, the application of the aptasensor was evaluated in the presence of 10 serum samples, and the recovery values were from 93 to 110.1%.

Assuntos

RESUMO

Novel rapid methodologies for the detection of bacteria have been recently investigated and applied. In hospital environments, infections by pathogens are very common and can cause serious health problems. Pseudomonas aeruginosa is one of the most common bacteria, which can grow in hospital equipment such as catheters and respirators. Even at low concentrations, it can cause severe infections as it is resistant to antibiotics and other treatments. Based on this subject's relevance, this work aimed to develop a colorimetric biosensor using aptamer-functionalized gold nanoparticles for identifying P. aeruginosa. The detection mechanism is based on the color change of gold nanoparticles (AuNPs) from red to blue-purple through NaCl induction after bacteria incubation and aptamer-target binding. First, AuNPs were synthesized and characterized. The influence of aptamer and sodium chloride concentration on the agglomeration of AuNPs was investigated. Optimization of aptamer concentration and salt addition were performed. The best condition for detection was 5 µM aptamers and 200 mM of NaCl. In this case, P. aeruginosa was detected after 5 h for concentrations from 108 to 105 CFU mL-1, being 105 and 104 CFU mL-1 the detection limit for color change by the naked eye and UV-Vis spectrometry, respectively. In addition, other bacteria such as E. coli, S. typhimurium, and Enterobacteriaceae bacterium were also detected with color changing from red to gray. Finally, it was confirmed that the salt incubation time can be 2 h, and that the ideal aptamer concentration is 5 µM. Thus, the colorimetric analysis can be a simple and fast detection method for P. aeruginosa in the range of 108 to 105 CFU mL-1 to the naked eye. KEY POINTS: • A new method for rapid detection of Pseudomonas aeruginosa • Aptamers conjugated with gold nanoparticles allow pathogen detection by colorimetry • No need for previous surface modification of nanoparticles.

Assuntos

RESUMO

Aflatoxin contamination of cattle feed is responsible for serious adverse effects on animal and human health. A number of approaches have been reported to determine aflatoxin B1 (AFB1) in a variety of feed samples using aptasensors. However, rapid analysis of AFB1 in these matrices remains to be addressed in light of the complexity of the preanalytical process. Herein we describe an optimization on the preanalytical stage to minimize the sample processing steps required to perform semi-quantitative colorimetric detection of AFB1 in cattle feed using a gold nanoparticle-based aptasensor (nano-aptasensor). The optical behavior of the nano-aptasensor was characterized in different organics solvents, with acetonitrile showing the least interference on the activity of the nan-aptasensor. This solvent was selected as the extractant agent for AFB1-containing feed, allowing for the first time, direct colorimetric detection from the crude extract (detection limit of 5 µg/kg). Overall, these results lend support to the application of this technology for the on-site detection of AFB1 in the dairy sector.

Assuntos

RESUMO

BACKGROUND: Prostate cancer cells have very high PCA3 messenger RNA levels, which turns them into one of the new biomarkers for prostate cancer prognosis and diagnosis. OBJECTIVE: Our goal here is to develop a new aptasensor to detect PCA3 release by the cancer cell. METHODS: DNA hairpin containing PCA3 aptamer was thiolated, conjugated to methylene blue (MB) redox probe, and immobilized on gold electrode through self-assembly to detect label-free cancer cells. RESULTS: Our data have evidenced stable and sensitive sensors presenting a wide linear detection range (0-150ng/mL). In addition, monitoring PCA3 released by different types of prostate cells can provide in-depth knowledge about prostate cancer dynamics; therefore, it is a powerful platform for earlier clinical diagnostic. The released PCA3 can vary depending on the type of adopted prostate cells. CONCLUSION: PCA3 release was monitored in a group of cells for 2 h; it showed significantly higher expression in both LNCaP and PC-3 cells. This strategy provides a unique and simple methodology to achieve more sensitive and specific PCA3 detection; thus, it emerged as a promising tool for early cost-effective diagnosis.

Assuntos

RESUMO

The rapid spread of SARS-CoV-2 infection throughout the world led to a global public health and economic crisis triggering an urgent need for the development of low-cost vaccines, therapies and high-throughput detection assays. In this work, we used a combination of Ideal-Filter Capillary Electrophoresis SELEX (IFCE-SELEX), Next Generation Sequencing (NGS) and binding assays to isolate and validate single-stranded DNA aptamers that can specifically recognize the SARS-CoV-2 Spike glycoprotein. Two selected non-competing DNA aptamers, C7 and C9 were successfully used as sensitive and specific biological recognition elements for the development of electrochemical and fluorescent aptasensors for the SARS-CoV-2 Spike glycoprotein with detection limits of 0.07 fM and 41.87 nM, respectively.

Assuntos

RESUMO

Aptamers are single-stranded DNA or RNA molecules which are submitted to a process denominated SELEX. SELEX uses reiterative screening of a random oligonucleotide library to identify high-affinity binders to a chosen target, which may be a peptide, protein, or entire cells or viral particles. Aptamers can rival antibodies in target recognition, and benefit from their non-proteic nature, ease of modification, increased stability, and pharmacokinetic properties. This turns them into ideal candidates for diagnostic as well as therapeutic applications. Here, we review the recent accomplishments in the development of aptamers targeting emerging viral diseases, with emphasis on recent findings of aptamers binding to coronaviruses. We focus on aptamer development for diagnosis, including biosensors, in addition to aptamer modifications for stabilization in body fluids and tissue penetration. Such aptamers are aimed at in vivo diagnosis and treatment, such as quantification of viral load and blocking host cell invasion, virus assembly, or replication, respectively. Although there are currently no in vivo applications of aptamers in combating viral diseases, such strategies are promising for therapy development in the future.

RESUMO

Human epidermal growth factor receptor-2 (HER2) is an important biomarker in the diagnosis and prognosis of breast cancer. This work aimed to develop an aptasensor to detect HER2 in human serum. HER2 aptamer was immobilized by electrostatic adsorption on the surface of a homemade screen-printed electrode modified with poly-L-lysine. Measurements were made by differential pulse voltammetry using methylene blue as a redox indicator. A calibration curve was constructed (R2 = 0.997) using different concentrations of HER2 protein (10-60 ng/mL) in PBS buffer (pH 7.4), with a detection limit of 3.0 ng/mL. The aptasensor showed good reproducibility with relative standard deviations (RSDs) of 3% and remained stable for 3 days with an RSD around 2%. When the tests were performed with serum from a healthy woman, a peak of 6.72 µA was found without the addition of the protein. When we tested the serum of a woman with HER2+ breast cancer, we obtained a signal of 2.65 µA; the same pattern was found when adding to protein in serum control, i.e., the higher the concentration of protein, the lower the signal. The aptasensor was characterized by scanning electron microscopy and isothermal titration calorimetry (ITC), showing excellent interaction between aptamer and target protein. The results revealed a promising and sensitive tool capable of detecting HER2 protein in human serum with albumin depletion, aiding in the molecular diagnosis of breast cancer. Graphical abstract.

Assuntos

RESUMO

Paper-based analytics allows building portable and disposable devices for point-of-care (POC) diagnosis. Conventional methods for quantifying proteins exhibit substantial disadvantages related to costs and difficulty of the technique when used in settings where fast and cost-effective assays are needed. We report the successful application of a simple, rapid, easy to use, and label-free aptasensor strategy based on the selective fluorescence of the NMM IX dye. For the probe design, the three-dimensional (3-D) structures of the DNA components were carefully analyzed using software for the 3-D visualization of crystallographic structures. The chimeric aptafluorescence molecule consists of two modules, a detection aptamer and a transduction sequence that induces the specific fluorescence of NMM IX. In the presence of thrombin, a fluorescent spot visible to the naked eye can be observed. The fluorescent response is directly proportional to protein concentration and can be easily quantified colorimetrically using a low-cost microscopy system. The recognition probe design might be adaptable to other relevant biological analytes by changing the sequence of the aptamer. This proof of principle represents a contribution to the development of useful, cheap, reliable, and simple protein quantification assays for POC testing.

Assuntos

RESUMO

Early prostate cancer (PCa) diagnostic is crucial to enhance patient survival rates; besides, non-invasive platforms have been developed worldwide in order to precisely detect PCa biomarkers. Therefore, the aim of the present study is to develop a new aptamer-based biosensor through the self-assembling of thiolated aptamers for PSA and VEGF on the top of gold electrodes. This biosensor was tested in three prostate cell lines (RWPE-1, LNCaP and PC3). The results evidenced a stable and sensitive sensor presenting wide linear detection ranges (0.08-100 ng/mL for PSA and 0.15 ng-100 ng/mL for VEGF). Therefore, the aptasensor was able to detect the patterns of PSA and VEGF released in vitro by PCa cells, which gave new insights about the prostate cancer protein dynamics. Thus, it could be used as a non-invasive PCa clinical diagnosis instrument in the near future. Graphical Abstract Overview of the experimental design applied to the aptamer-based electrochemical sensor self-assembled on the thiolated hairpin structure. A filter membrane was added on top of working electrode to provide the cell-attachment surface after aptamer incubation, without compromising the aptamer layer. The pore membrane allowed target proteins to pass to the aptamer surface; the MCH backfilling avoided unspecific protein binding to the gold electrode surface.

Assuntos