RESUMO
Los septos del seno maxilar son variantes anatómicas que se forman como resultado de los residuos de la hipoplasia en diferentes áreas del proceso alveolar siendo de forma, tamaño y número variable. Su hallazgo se puede realizar mediante radiografÃas panorámicas de rutina. La importancia de un septo en el seno maxilar es que puede generar modificaciones para las cirugÃas, pudiendo ser necesario abrir dos o más ventanas quirúrgicas para su remoción. Objetivo: La finalidad de este estudio fue analizar los rasgos tomográficos de los septos del seno maxilar en pacientes que asistieron entre los años 2014 - 2016 a la clÃnica dental docente de la Universidad Peruana Cayetano Heredia. Materiales y métodos: Esta investigación fue de tipo transversal y descriptivo, para ello se examinaron 813 tomografÃas computarizadas volumétricas. La prueba de chi cuadrado y la estadÃstica descriptiva se usaron para el análisis, con un intervalo de confianza al 95%, con un valor p < 0,05. Resultados: 298 pacientes presentaron septos, presentando mayor porcentaje los septos congénitos (69.2%) y fueron más comunes en pacientes de sexo femenino con un 36%.Conclusiones: prevalecieron los septos de tipo congénito, lo que indica que se formaron a partir del desarrollo radicular.
The septa of the maxillary sinus are anatomical variants that are formed as a result of the residues of hypoplasia in different areas of the alveolar process, being of variable shape, size and number.Your finding can be made using routine panoramic radiographs. The importance of a septum in the maxillary sinus is that it can generate modifications for maxillary sinus surgeries, and it may be necessary to open two or more surgical windows for its removal. Objective: The purpose of this study was to analyze the tomographic features of the maxillary sinus septa in patients who attended the teaching dental clinic of the Universidad Peruana Cayetano Heredia between 2014- 2016. Materials and methods: This research was cross-sectional and descriptive, for which 813 cone beam CT scans were examined. Chi square test and descriptive statistics were used for the analysis, with a 95% confidence interval, with a value p < 0.05. Results: 298 patients presented septa, with a higher percentage of congenital septa (69.2%) and were more common in female patients with 36%. Conclusions: the congenital type septa prevailed, which indicates that they were formed from root development.
RESUMO
O presente estudo in vivo propôs avaliar a precisão de instalação de 23 implantes sem retalhos empregando guias cirúrgicos obtidos por estereolitografia em quatro pacientes com maxilas totalmente desdentadas. Após duplo escaneamento com tomografia computadorizada tipo cone-beam, o planejamento pré-cirúrgico foi realizado com o programa Procera. Depois da cirurgia, realizou-se a comparação entre as posições dos implantes planejados e executados através de tomografia computadorizada pós-operatória. Para comparação da posição e dos longos eixos das imagens dos implantes foram eleitos três pontos em cada implante planejado e executado: no centro do limite coronário (D1), no centro da porção central (D2), no centro do limite apical (D3). Assim, as distâncias e o ângulo (A1) formado entre os longos eixos dos implantes planejados e executados foram numericamente calculados. De acordo com a análise tomográfica, os implantes executados em relação aos implantes planejados apresentaram desvios médios de 0,72 mm para a posição D1; 0,98 mm para a posição D2; 1,45 mm para a posição D3; 1,92 graus para o ângulo A1. Concluiu-se que houve desempenho adequado para a utilização de protocolos de cirurgia guiada baseados no método empregado em associação com guias cirúrgicos produzidos pelo processo de estereolitografia. A transferência do planejamento protético-cirúrgico para o campo operatório foi considerada satisfatória, visto que viabilizou a instalação de implantes dentários nas situações propostas...
The aim of this in vivo study was to evaluate the placement accuracy of 23 dental implants with fl apless surgery using stereolithographic guides in four completely edentulous maxillary patients. After double scanning with cone beam computerized tomography (CBCT), the presurgical planning was performed using appropriate software (Procera). After surgery, executed and planned implant positions were compared using CBCT superimposing. Measurements were made at the center of three pre-selected points: coronal (D1), central (D2), and apical (D3) portions. Thus, the distances among points and the angle (A1) formed between the long axes of the planned/executed implants were calculated. Mean deviations were as the following: 0.72 mm at D1, 0.98 mm at D2, and 1.45 mm at D3 positions. The mean angular deviaton (A1) was 1.92 degrees. It was concluded that there was adequate performance with surgical guides produced by stereolithographic process. The transfer of prosthetic-surgical planning for the surgical area was considered satisfactory, since it allowed for implant placement in proposed situations...
Assuntos
Humanos , Tomografia Computadorizada de Feixe Cônico , Implantes Dentários , Estereotipagem , Cirurgia Assistida por ComputadorRESUMO
Introducción: los procedimientos quirúrgicos que se realizan en la mandíbula requieren conocimiento detallado de la posición y trayectoria del conducto alveolar inferior (CAI) que contiene en su interior al nervio alveolar inferior (NAI). La tomografía volumétrica computarizada (TCCB) es un medio diagnóstico subutilizado en nuestro medio principalmente por los costos, sin embargo es un medio sensible y preciso para la evaluación del CAI por encima de otros medios diagnósticos. Métodos: se evaluaron 50 tomografías volumétricas computarizadas de última generación con tecnología Cone Beam (TCCB) de las mandíbulas de pacientes mayores de dieciocho años, con premolares y molares mandibulares en boca, sin anomalías evidentes de los maxilares, patologías mandibulares y patologías que comprometieran la calidad ósea, se realizaron cortes transeccionales e imágenes panorámicas. Resultados: el promedio de distancia del CAI a la cresta alveolar fue 17,9 mm en mujeres y 19,8 en hombres, hacia la tabla vestibular el promedio fue 3,8 mm para ambos sexos; hacia la tabla lingual de 3,2 mm en mujeres y en hombres de 2,8; el promedio del CAI al borde basilar fue 6,5 mm para mujeres y 6,2 en hombres y del borde anterior de rama al foramen mandibular el promedio fue 12,3 mm para mujeres y 13,2 en hombres. Conclusiones: la TCCB es una ayuda diagnóstica altamente sensible para la ubicación de la posición y trayectoria del CAI, no hubo diferencias significativas en cuanto a edad y lados, de las medidas tomadas en los tres sectores del cuerpo mandibular.
Introduction: surgical procedures involving the mandible require a deep understanding of the position and course of the inferior alveolar conduct (IAC) that encloses the inferior alveolar nerve. Computerized volumetric tomography (CVT) is an under used diagnostic tool in our context, mostly because of the costs it compels, nevertheless its a sensitive and precise method for the evaluation of IAC above other diagnostic current tools. Method: 50 last generation computerized volumetric tomographies, using Cone Beam technology, were evaluated in 18 years old patients or older, with premolars and molars present, without any evident maxillary anomalies, mandibular pathology or alteration that decrease bone quality. Panoramic and transectional cuts were performed. Results: the average distance from IAC to alveolar crest was 17.9 mm for women and 19.8 mm for men. The average distance from IAC to the vestibular plate was 3.8 mm for both genders towards the lingual plate, the distances from IAC was 3,2mm for women and 2.8 mm for men. The average distance from basilar border to IAC was 6.5 mm for women and 6.2 mmfor men. From the mandibular foramen to anterior border of mandibular ramus, the average distance for men was 13.2 mm and 12.3 mm for women. Conclusion: CVT is a highly sensitive diagnostic tool for the assessment of IAC position and course. Therewere no differences regarding age or between both sides of the mandible among the three measured points on the mandibular body.