RESUMO
This study evaluated the effects of the temperature and pressure used when compacting banana leaves on viscoelastic properties and briquette quality. Banana leaves with 12.4% of humidity were milled at two ranges of average particle size. The briquetting was carried out in a cylinder-piston device coupled to a universal mechanical test machine, under different compacting temperatures (30 and 120 °C) and pressures (20, 40 and 60 MPa). Several parameters, including compacting module, porosity index, final density, critical density, compacting energy, compression ratio, higher heating value, and energy density, were investigated. The banana leaf particles smaller than 1.7 mm performed better during compaction, with low compacting resistance. Temperature showed less influence on final density than pressure. The increase of pressure contributed to decreasing the compacting module and to achieving denser briquettes. It was not necessary to apply high temperature to obtain briquettes with high final density and energy density. The optimum briquetting process parameters identified can be used to produce briquettes from banana leaves at an industrial scale with an extruder. Briquetting adds value to banana leaf waste and reduces environmental pollution.
Assuntos
Musa , Calefação , Folhas de Planta , Pressão , TemperaturaRESUMO
In the context of the circular bioeconomy and cleaner production, the incorporation of the by-products of plant biomass production in the bioenergy chain is fundamental. However, lignocellulosic wastes have properties that hinder their use for the production of biofuels. This study aims to evaluate how blends of lignocellulosic wastes improve the physical, chemical, and mechanical quality of pellets destined to the industrial sector, and to identify the challenges associated with the use of agroforestry biomass as raw material for pelletizing. Pellets were produced from blends of soybean wastes, sorghum wastes, pine needles, rice powder, Eucalyptus sawdust, and charcoal fines. Additionally, pure pellets composed of soybean wastes, sugarcane bagasse, and pine wood were evaluated. The effect of biomass type on the energy density, ash content, net heating value, and ultimate analysis was significant. The pellets produced with soybean wastes presented high contents of N (3.5-4.9%) and ashes (16.4-26.7%), besides low mechanical durability (≤ 96%), hindering its commercialization for industrial purposes. Pellets with sugarcane bagasse presented N (1.5%), S (0.03%), ashes (5.6%), mechanical durability (96.6%), and net heating value (15.1 MJ kg-1), suitable for industrial energy use in accordance with ISO 17225-6. The high N and ash contents and the low mechanical durability are the greatest challenges for the energy use of pellets produced from Brazilian agroforestry wastes.
Assuntos
Biocombustíveis , Lignina , Biomassa , BrasilRESUMO
This work aimed to study the potential use of pyrolyzed orange peels as solid biofuels and biosorption of heavy metals. The dry biomass and the biofuel showed moderate levels of carbon (44-62%), high levels of oxygen (30-47%), lower levels of hydrogen (3-6%), nitrogen (1-2.6%), sulfur (0.4-0.8%) and ash with a maximum of 7.8%. The activation energy was calculated using Kissinger method, involving a 3 step process: volatilization of water, biomass degradation and volatilization of the degradation products. The calorific value obtained was 19.3MJ/kg. The studies of metal biosorption based on the Langmuir model obtained the best possible data fits. The results obtained in this work indicated that the potential use of waste orange peel as a biosorbent and as a solid biofuel are feasible, this product could be used in industrial processes, favoring the world economy.