RESUMO

OBJECTIVE: To analyze the effect of P11-4 self-assembly peptide on cell viability and osteogenic capacity of SCAPs through mineral deposition and gene expression of osteogenic markers. METHODS: SCAPs were seeded in contact with P11-4 (10 µg/ml, 100 µg/ml and 1 mg/ml) solution. Cell viability was evaluated using a colorimetric assay MTT: 3-(4,5-dimethyl-thiazolyl-2)-2,5- diphenyltetrazolium bromide) in an experimental time of 24, 48 and 72 h (n = 7). Mineral deposition and quantification provided by the cells was tested using the Alizarin Red staining and Cetylpyridinium Chloride (CPC), respectively, after 30 days (n = 4). Gene expression of Runt-related transcription factor 2 (RUNX2), Alkaline phosphatase (ALP) and Osteocalcin (OCN) was quantified using quantitative polymerase chain reaction (RT-qPCR), at 3 and 7 days with Glyceraldehyde-3-phosphate dehydrogenase (GAPDH) as the housekeeping gene, and relative gene expression was measured using the ΔΔCq method. Data were analyzed using Kruskall-Wallis followed by multiple comparisons, and T-test for gene expression with α=0.05. RESULTS: All tested concentrations (10 µg/ml, 100 µg/ml and 1 mg/ml) were not cytotoxic at time 24 and 48 h. After 72 h, a slight decrease in cell viability was observed for the lowest concentration (10 µg/ml). The concentration of 100 µg/ml P11-4 showed the highest mineral deposition. However, qPCR analysis of P11-4 (10 µg/ml) showed upregulation of RUNX2 and OCN at 3 days, with downregulation of ALP at 3 and 7d CONCLUSION: P11-4 did not affect cell viability, induced mineral deposition in SCAPs, and upregulated the expression of RUNX2 and OCN genes at 3 days, while downregulating ALP expression at 3 and 7 days. CLINICAL SIGNIFICANCE: Based on the results obtained in this study it can be stated that self-assembling peptide P11-4 is a potential candidate to induce mineralization on dental stem cells for regenerative purposes and also for a clinical use as a capping agent without compromising the cells health.

Assuntos

RESUMO

OBJECTIVES: Electrospun scaffolds are a versatile biomaterial platform to mimic fibrillar structure of native tissues extracellular matrix, and facilitate the incorporation of biomolecules for regenerative therapies. Self-assembling peptide P11-4 has emerged as a promising strategy to induce mineralization; however, P11-4 application has been mostly addressed for early caries lesions repair on dental enamel. Here, to investigate P11-4's efficacy on bone regeneration, polymeric electrospun scaffolds were developed, and then distinct concentrations of P11-4 were physically adsorbed on the scaffolds. METHODS: P11-4-laden and pristine (P11-4-free) electrospun scaffolds were immersed in simulated body fluid and mineral precipitation identified by SEM. Functional groups and crystalline phases were analyzed by FTIR and XRD, respectively. Cytocompatibility, mineralization, and gene expression assays were conducted using stem cells from human exfoliated deciduous teeth. To investigate P11-4-laden scaffolds potential to induce in vivo mineralization, an established rat calvaria critical-size defect model was used. RESULTS: We successfully synthesized nanofibrous (∼ 500 nm fiber diameter) scaffolds and observed that functionalization with P11-4 did not affect the fibers' diameter. SEM images indicated mineral precipitation, while FTIR and XRD confirmed apatite-like formation and crystallization for P11-4-laden scaffolds. In addition, P11-4-laden scaffolds were cytocompatible, highly stimulated cell-mediated mineral deposition, and upregulated the expression of mineralization-related genes compared to pristine scaffolds. P11-4-laden scaffolds led to enhanced in vivo bone regeneration after 8 weeks compared to pristine PCL. SIGNIFICANCE: Electrospun scaffolds functionalized with P11-4 are a promising strategy for inducing mineralized tissues regeneration in the craniomaxillofacial complex.

Assuntos

RESUMO

OBJECTIVES: Self-assembling peptide P11-4 is amphiphilic and pH-triggered, effective on repairing early enamel carious lesions and dentin remineralization. However, P11-4 effects on dentin biomineralization and repair ability remain unexplored. Thus, cytocompatibility and effectiveness of P11-4 on inducing mineralization and migration of odontoblast-like cells (MDPC-23) were investigated. METHODS: MDPC-23 were seeded in contact with P11-4 (0.5 and 1 µg/ml), Dentin Matrix Protein 1 (DMP1 0.5 and 1 µg/ml) or Calcium hydroxide (Ca(OH)2 100 µg/ml) solutions. Cell viability was verified using MTT (n = 6/group). Mineral deposition was tested using Alizarin Red (n = 4/group). Cell migration was assessed by light microscopy (n = 2/group). MTT and Alizarin Red data were compared using Kruskal-Wallis and Mann-Whitney (α=0.01). RESULTS: P11-4 (0.5 and 1 µg/ml) and DMP1 (0.5 and 1 µg/ml) resulted the highest cell viability; Ca(OH)2 presented the lowest. 1 µg/ml DMP1 and 1 µg/ml P11-4 promoted the highest mineral deposition. Ca(OH)2 presented lower values of mineral deposits than DMP1 1 µg/ml (p < 0.01), but similar to P11-4 1 µg/ml. P11-4 and DMP1 at 0.5 µg/ml induced lesser mineral precipitation than P11-4 and DMP1 at 1 µg/ml (p < 0.01), with no difference to Ca(OH)2. All materials stimulated cell migration, however, lower concentrations of DMP1 and P11-4 demonstrated a higher migration potential. CONCLUSION: P11-4 did not affect cell viability, induces mineral deposition and MDPC-23 migration like DMP1. CLINICAL SIGNIFICANCE: Self-assembling peptide P11-4 does not affect the cell viability and induces mineral deposition comparable to native protein involved in biomineralization. Combined with its ability to bind type I collagen, P11-4 is a promising bioinspired molecule that provides native-tissue conditions and foster further studies on its ability to form dentin bridges in pulp-capping strategies.

Assuntos

RESUMO

This work is focused on the development of a genosensor for microRNA-21 quantification using surface plasmon resonance (SPR) to transduce the hybridization event. The biosensing platform was built by self-assembling two bilayers of poly(diallyldimethylammonium chloride) (PDDA) and graphene oxide (GO) at a gold surface modified with 3-mercaptopropane sulfonate (MPS), followed by the covalent attachment of the DNA probe. GO was used in two directions, to allow the anchoring of the probe DNA and to increase the sensitivity of the biosensing event due to its field enhancer effect. The new bioanalytical platform represents an interesting alternative for the label-free biosensing of microRNA-21, with a linear range between 1.0 fM and 10 nM, a sensitivity of 5.1 ± 0.1 moM-1 and a detection limit of 0.3fM. The proposed sensing strategy was successfully used for the quantification of microRNA-21 in enriched urine samples. Graphical abstract.

Assuntos

RESUMO

BACKGROUND: The use of biomaterials has been expanded to improve the characteristics of vaccines. Recently we have identified that the peptide PH(1-110) from polyhedrin self-aggregates and incorporates foreign proteins to form particles. We have proposed that this peptide can be used as an antigen carrying system for vaccines. However, the immune response generated by the antigen fused to the peptide has not been fully characterized. In addition, the adjuvant effect and thermostability of the particles has not been evaluated. RESULTS: In the present study we demonstrate the use of a system developed to generate nano and microparticles carrying as a fusion protein peptides or proteins of interest to be used as vaccines. These particles are purified easily by centrifugation. Immunization of animals with the particles in the absence of adjuvant result in a robust and long-lasting immune response. Proteins contained inside the particles are maintained for over 1 year at ambient temperature, preserving their immunological properties. CONCLUSION: The rapid and efficient production of the particles in addition to the robust immune response they generate position this system as an excellent method for the rapid response against emerging diseases. The thermostability conferred by the particle system facilitates the distribution of the vaccines in developing countries or areas with no electricity.

Assuntos

RESUMO

Here we report a new and straightforward method to yield durable polyelectrolyte complexes (hydrogel PECs) from gellan gum (GG) and chitosan (CS) assemblies, without metallic and covalent crosslinking agents, commonly used to produce GG and CS-based hydrogels, respectively. This new approach overcomes challenges of obtaining stable and durable GG-based hydrogels with structural homogeneity, avoiding precipitation and aqueous instability, typical of PEC-based materials. PECs are created by blending CS:GG solutions (at 60 °C) with GG:CS weight ratios between 80:20 to 40:60. X-ray photoelectron spectroscopy (XPS) analysis shows that CS-GG chains are interacting by electrostatic and intermolecular forces, conferring a high degree of association to the washed PECs, characteristic of self-assembling of polymer chains. The CS:GG weight ratio can be tuned to improve polyelectrolyte complex (PEC) high porosity, stability, porous homogeneity, and degradation rate. Physical and thermosensitive CS/GG-based hydrogels can have advantages over conventional materials produced by chemical processes.

Assuntos

RESUMO

The thermodynamic stability of assemblies formed by a bis-urea-based supramolecular polymer, 2,4-bis(2-ethylhexylureido)toluene (EHUT), was investigated in solutions using either benzene or toluene as the solvent. Starting from a higher temperature in which EHUT was soluble in both solvents, molecules spontaneously self-organized into tubular assemblies upon cooling and these assemblies were stable in a wide range of temperatures. However, the systems followed different paths below a specific temperature: while the supramolecular polymer remained stable in toluene, EHUT molecules underwent precipitation in benzene. The causes for these different behaviors were explored by molecular dynamics simulations, which provided support for stronger enthalpic stabilization of the tubular assemblies in toluene as compared to benzene. This stabilization was due mainly to the better interaction energy of trapped toluene molecules instead of benzene ones. For both cases, lowering the temperature makes the solvent penetration inside the tubes less favorable, which reduces the stability of supramolecular structures upon cooling. Graphical abstract Different EHUT solubilities.

RESUMO

AIM: Nanoparticle-cell interactions can promote cell toxicity and stimulate particular behavioral patterns, but cell responses to protein nanomaterials have been poorly studied. RESULTS: By repositioning oligomerization domains in a simple, modular self-assembling protein platform, we have generated closely related but distinguishable homomeric nanoparticles. Composed by building blocks with modular domains arranged in different order, they share amino acid composition. These materials, once exposed to cultured cells, are differentially internalized in absence of toxicity and trigger distinctive cell adaptive responses, monitored by the emission of tubular filopodia and enhanced drug sensitivity. CONCLUSION: The capability to rapidly modulate such cell responses by conventional protein engineering reveals protein nanoparticles as tuneable, versatile and potent cell stressors for cell-targeted conditioning.

Assuntos

RESUMO

Gold nanorods (AuNRs) are suitable for constructing self-assembled structures for the development of biosensing devices and are usually obtained in the presence of cetyltrimethylammonium bromide (CTAB). Here, a sulfated chitosan (ChiS) and gum arabic (GA) were employed to encapsulate CTAB/AuNRs with the purpose of studying the interactions of the polysaccharides with CTAB, which is cytotoxic and is responsible for the instability of nanoparticles in buffer solutions. The presence of a variety of functional groups such as the sulfate groups in ChiS and the carboxylic groups in GA, led to efficient interactions with CTAB/AuNRs as evidenced through UV-vis and FTIR spectroscopies. Electron microscopies (HR-SEM and TEM) revealed that nanoparticle clusters were formed in the GA-AuNRs sample, whereas individual AuNRs, surrounded by a dense layer of polysaccharides, were observed in the ChiS-AuNRs sample. Therefore, the presented work contributes to the understanding of the driving forces that control the surface interactions of the studied materials, providing useful information in the building-up of gold self-assembled nanostructures.

Assuntos

RESUMO

The development of materials that allow proper functioning of cells on solid supports is directly relevant to the construction of living-cell biosensors. Both physical and chemical properties of the surfaces have been shown to be critical in this field. Our aim is to report correlations between chemical properties of surfaces and cell behavior by studying adhesion, viability and proliferation of fibroblasts and HeLa cells. Neither fibroblasts nor HeLa cells adhered to a hydrophobic surface. Fibroblasts were able to attach and proliferate well on all other surfaces tested. In contrast, on some surfaces where HeLa cells adhered and were viable, proliferation decreased by half while on others proliferation was not affected. Proliferation was significantly correlated with the level of adsorption of serum proteins on the surface (quantified by surface plasmon resonance), but not with surface wettability (water contact angle). Interestingly, surfaces modified with COOH and HSO3 groups were the ones that favored most protein adsorption and allowed the best measures for HeLa cell proliferation. The decrease of HeLa cell proliferation on surfaces covered with poly-L-lysine (PL) was related with the profile of integrin expression. Compared to a polystyrene control surface, there was an increase in αV and αVß3 and a decrease in α2 and α3, indicating that migration rather than proliferation could be favored on PL functionalized surfaces. These results indicate that charge is more important than wettability to determine biocompatibility.

Assuntos