RESUMO

Introduction: Foraminal Enlargement (FE) is a cleaning performed in the apical-most region of the tooth, in order to optimize root disinfection. This systematic review evaluated the influence of FE during root canal treatment on bacterial reduction and repair of the periapical lesion. Materials and Methods: Searches in PubMed/MEDLINE, Scopus, Cochrane Library, Web of Science, Embase, Scielo, Lilacs and OpenGrey were performed until January-2024. Ex vivo and in vivo studies evaluating the effects of FE in the bacterial reduction and repair of the periapical lesion were included, respectively, followed by risk of bias assessment (modified version of Joanna Briggs Institute's for ex vivo studies and Systematic Review Centre for Laboratory animal Experimentation's risk of bias tools for in vivo studies). The meta-analysis was not feasible and a qualitative summary for each outcome was provided. Results: Of 950 studies, 2 in vivo studies were eligible, using animal models with infected teeth. Of these two, periapical repair was evaluated with hematoxylin-eosin stain, and FE improved periapical healing. Regarding ex vivo studies, 3 were eligible, using extracted human teeth. The inoculations in ex vivo models were performed with Enterococcus (E.) faecalis, and FE reduced E. faecalis in the ex vivo models. Conclusions: Foraminal enlargement seems to increase bacterial reduction within the root canal, and provide major periapical tissue repair on the histological analysis in animal studies. However, caution is necessary when translating these results to the clinical environment.

RESUMO

BACKGROUND: Although reciprocating instrumentation has been extensively studied for permanent teeth, stronger evidence for its use in primary teeth is lacking. AIM: The aim of this randomized clinical trial was to compare the efficacy of endodontic treatment in primary molars using reciprocating (RECIP) and manual (MAN) instrumentation techniques after 24 months. DESIGN: Primary molars with indication of endodontic treatment were randomly divided into two groups: MAN and RECIP. Treatments were performed, and root canals were filled with calcium hydroxide and iodoform paste. Teeth were later restored with bulk-fill composite resin and re-evaluated after 6, 12, 18, and 24 months. The primary outcome was the success of the endodontic treatment evaluated by Cox regression analysis adjusted by cluster and success rate after 24 months in the intention-to-treat (ITT) population. Instrumentation time, discomfort, postoperative pain, and quality of root canal filling were also evaluated as secondary endpoints. RESULTS: A total of 151 primary win 107 children were included, and 137 were followed up for 24 months. Success rate of teeth allocated to the MAN group was 57.3% and 55.3% for RECIP (p = .792); MAN instrumentation, however, was more time-consuming (p = .005). CONCLUSION: The efficacy of endodontic treatment in primary molars using reciprocating and manual instrumentation is similar after 24 months.

Assuntos

RESUMO

INTRODUCTION: This study assessed the number of mesial and distal canals of mandibular molars in which the R-Pilot pathfinding reciprocating instrument reached the working length (WL) during macro glide path procedure. Fracture and deformation rates were also evaluated. METHODS: One hundred fifty-six root canals of 52 teeth were scouted to the length of the apical foramen. Then the R-Pilot instrument was positioned at the canal orifice and activated. The instrument was moved by using a pecking motion and light apical pressure. This procedure was repeated in an attempt to reach the WL. The type of fracture and/or instrument deformation was assessed by scanning electron microscopy, whereas the roots with fractured instruments were scanned through micro-computed tomography. The percentage frequency distribution of fractures, deformations, and root canals in which the R-Pilot reached the WL were recorded and statistically compared by using the Pearson's χ2 test with α = 5%. RESULTS: R-Pilot instruments reached the WL in 139 root canals (89.10%), and χ2 test showed a significant difference between the observed frequencies and the expected frequencies (χ2 = 95.41, P = .000). The observed frequencies of fractures (2.56%) and deformations (1.92%) were also significantly lower than the expected (fracture: χ2 = 140.41, P = .000; deformation: χ2 = 144.23, P = .000). Fractures occurred mostly at the apical and curved parts of the root canals. CONCLUSIONS: R-Pilot reached the WL in 89.10% of the root canals of mandibular molars with fracture and deformation rates of 2.56% and 1.92%, respectively.

Assuntos

RESUMO

Abstract The aim of this study was to assess the performance and surface alteration of two single-file systems according to the number of uses. Ten WaveOne Primary files (25/.08) and ten One Shape NG files (25/.06) were used for instrumentation of mesial root canals of mandibular molars. Each instrument was cleaned and sterilized after the preparation of two root canals and then reused. The time spent for instrumentation of each root canal was recorded and analyzed by using t-test. Microphotographs of the surface of the instruments were taken with a scanning electron microscope at different magnifications (i.e. 18x, 160x, 500x and 1000x) and at a distance of 4 mm from the instrument's tip before being analyzed by four observers. Presence of disruption of cutting edge, crack, craters and unwinding was assessed and submitted to Fisher's exact test. Both systems showed manufacturing defects and cracks. The presence of disruption of cutting edges was major in WaveOne files from the sixth use, whereas One Shape NG files showed more unwinding. Only preparation time using WaveOne files was influenced by the number of uses. One can conclude that WaveOne files had more disruption of cutting edges and took longer time for root canal preparation from the sixth use onwards, whereas the One Shape NG files showed more unwinding at the tenth use.

Assuntos

RESUMO

INTRODUCTION: The aim of this study was to evaluate the effectiveness of a reciprocating single-instrument system (Reciproc-REC) compared with combined continuously rotating multiple-instrument systems [D-Race (DR) and BioRace (BR)] in reducing Enterococcus faecalis (E.f.) after gutta-percha removal. METHODS AND MATERIALS: Forty-six extracted human maxillary incisors were prepared and contaminated with E.f. strain (ATCC 29212) for 30 days. The samples were obturated and randomly divided into two experimental groups for gutta-percha removal (n=23): a REC group (R50) and a DR/BR group (DR1, DR2 and BR6). A standardized irrigation with 0.9% saline solution was performed. Root canal samples were taken with paper points before (S1) and after (S2) the removal of gutta-percha to establish bacterial quantification by culture. The time required for gutta-percha removal was also recorded. Positive and negative control groups (n=6) were used to test bacterial viability and control asepsis, respectively. Data were analysed using t-Student and one-way ANOVA tests (5% margin of error). RESULTS: The mean percentage of bacterial reduction was significantly higher in DR/BR group (84.2%) than in REC group (72.3%) (P<0.05). The mean time for obturation removal was 74.00 sec in REC group and 107.53 sec in DR/BR group (P<0.05). CONCLUSION: The combined continuously rotating multiple-instrument system was more effective in reducing bacteria after the removal of gutta-percha than the single-instrument system. None of the tested systems was able to completely eliminate root canal infection after gutta-percha removal. Thus, additional techniques should be considered.

RESUMO

AIM: To evaluate the influence of different apical enlargement protocols on the radiographic and histological healing of apical periodontitis in rats. METHODOLOGY: Apical periodontitis was induced bilaterally in the mandibular right and left first molars of 24 Wistar rats by pulp exposure to the oral cavity for 3 weeks. A standard serial root canal preparation technique was performed in the molar of one side, whilst the opposite side was the control group. Rats were randomly divided into three experimental groups (n = 8), according to the diameter of apical enlargement during root canal preparation: K-files size 20 (EG1), size 25 (EG2) and size 30 (EG3). Each animal was its own positive control, because the opposite arch remained untreated. Root canals were filled with a standard technique. After 3 weeks, the animals were euthanized. The main outcome of apical periodontitis healing was evaluated radiographically (mm2 ) and histologically (ordinal scores of inflammation) using a HE staining technique. The measurement of effect was obtained between the three experimental groups by carrying out generalized estimating equations, with Poisson regression with robust variance, pairing each experimental group with its respective control group within animals, adjusted for the mean within animal differences, with α = 5%. RESULTS: The mean and standard deviations of radiographic apical periodontitis size (mm2 ) and intensity of histological inflammatory scores were, respectively: EG1 (0.44 ± 0.27; 2.25 ± 0.46), EG2 (0.33 ± 0.10; 2.50 ± 0.53) and EG3 (0.22 ± 0.08; 2.63 ± 0.74). After 3 weeks, a significantly more favourable radiographic repair was observed when larger apical enlargement was performed (EG3), compared to EG1 and EG2 (P = 0.001). All experimental groups were associated with a significant difference on the radiographic and histological healing of apical periodontitis compared with its respective control group. CONCLUSION: Under the experimental conditions of this study, a larger apical enlargement protocol favoured a more rapid radiographic repair of apical periodontitis in rats after a 3-week follow-up.

Assuntos

RESUMO

Abstract The aim of this study was to evaluate the WaveOne Gold and One Shape New Generation systems regarding the bacterial removal from root canals infected with Enterococcus faecalis by comparing them to the conventional WaveOne and One Shape systems. Forty-eight distobuccal root canals of maxillary molars sterilized with ethylene oxide were infected with E. faecalis for 21 days, and then root canal initial bacterial sample was collected with paper cones and plated on M-enterococcus agar. The specimens were randomly divided into 4 groups according to the instrumentation: WaveOne Gold, One Shape New Generation, WaveOne and One Shape. After instrumentation, samples were collected with use of scraping and paper cones at immediate and 7 days after instrumentation. The bacterial reduction was calculated and then made intragroup analysis by Friedman test and intergroup analysis by Kruskal-Wallis with Dunn's post-hoc test, all at 5% significance. All techniques significantly reduced the number of bacteria in the root canal (p<0.05). WaveOne Gold and One Shape New Generation promoted higher bacterial reduction than WaveOne and One Shape systems (p<0.05), but no significant difference was found between WaveOne Gold and One Shape New Generation or between WaveOne and One Shape (p>0.05). Novel single-file systems promote better bacterial removal than the conventional single-file systems.

Resumo A proposta deste estudo foi avaliar os sistemas WaveOne Gold e One Shape New Generation em relação à remoção bacteriana de canais infectados com Enterococcus faecalis, comparando-os com seus sistemas convencionais WaveOne e One Shape. Quarenta e oito canais disto vestibulares de molares superiores esterilizados em óxido de etileno foram contaminados com E. faecalis por 21 dias, e então acoleta bacteriana inicial foi feita com cone de papel e plaqueadas em M-enterococcus agar. Os espécimes foram aleatoriamente divididos em quarto grupos de acordo com a instrumentação: WaveOne Gold, One Shape New Generation, WaveOne e One Shape. Após instrumentação, amostras foram coletadas utilizando limagem e cones de papel imediatamente e 7 dias após o preparo. A redução bacteriana foi calculada e então feita análise intra grupos com teste de Friedman, e entre grupos utilizando Kruskal-Wallis e teste de Dunn, todos a 5% de significância. Todas as técnicas reduziram significantemente o número de bactérias do canal radicular (p<0.05). WaveOne Gold e One Shape New Generation promoveram maior redução bacteriana que WaveOne e One Shape (p<0.05), mas nenhuma diferença significante foi encontrada entre WaveOne Gold e One Shape New Generation ou entre WaveOne e One Shape (p>0.05). Novos sistemas de lima-única promovem melhor remoção bacteriana que seus sistemas convencionais.

Assuntos

RESUMO

INTRODUCTION: The objective of this in vitro study was to evaluate whether cervical preparation with Mtwo files in a crown-down technique influences instrumentation time and the cyclic fatigue resistance of these instruments. METHODS AND MATERIALS: Two instrumentation techniques were evaluated (manufacturer and crown-down). Each group consisted of 10 kits containing four Mtwo instruments (10/0.04, 15/0.05, 20/0.06, and 25/0.06), which were used to prepare three standard simulated curved resin canals. The mean instrumentation time and the corresponding number of cycles for each instrumentation (NCI) were recorded. The instruments were rotated at a constant speed of 300 rpm in a stainless-steel canal (diameter of 1.5 mm) at a 90° angle of curvature and 5-mm radius. The center of the curvature was 5 mm from the tip of the instrument. The cyclic fatigue resistance of the files was determined by counting the number of cycles to failure (NCF). Data were analyzed by the Mann-Whitney test. RESULTS: The mean instrumentation time and NCI of files 10/0.04 and 15/0.05 were significantly lower (P<0.05) when the crown-down technique was used compared to the manufacturer's method for the same tip size/taper file. There was no significant difference in the mean NCF between the two techniques. CONCLUSION: The crown-down technique did not interfere with resistance to cyclic fatigue. However, the shorter instrumentation time of files 10/0.04 and 15/0.05 could reduce the fracture risk in the case of reuse of these instruments.

RESUMO

Abstract The aim of this study was to evaluate the bacterial reduction promoted by ProTaper Next and Twisted File by comparing to ProTaper Universal and manual technique. Sixty distobuccal root canals of maxillary molars sterilized with ethylene oxide were contaminated with Enterococcus faecalis broth culture. After incubation for 21 days, bacterial samples were collected and cultured on m-Enterococcus agar plates. The root canals were divided into 4 groups, according to the system used for instrumentation: ProTaper Next, Twisted File, ProTaper Universal, and crown down manual technique. Other 8 uncontaminated root canals were control asepsis. Bacterial samples were collected immediately and 7 days after instrumentation. The bacterial reduction was calculated and then made intragroup analysis by paired t-test and intergroup analysis by ANOVA and Tukey tests, all at 5% significance. All techniques significantly reduced the bacterial number in the root canal (p<0.05). ProTaper Next and Twisted File resulted in more bacterial reduction than ProTaper Universal and manual technique (p<0.05). ProTaper Next and Twisted File were similar (p>0.05). It can be concluded that ProTaper Next and Twisted File promote a higher bacterial reduction than Protaper Universal and manual technique.

Resumo A proposta deste estudo foi avaliar a redução bacteriana promovida pelos sistemas ProTaper Next e Twisted File comparando-os ao sistema ProTaper Universal e técnica manual. Sessenta raízes disto vestibulares de molares superiores esterilizadas com óxido de etileno foram contaminadas com Enterococcus faecalis. Após incubação por 21 dias, amostras foram coletas e cultivadas em m-Enterococcus agar. Os canais foram divididos em 4 grupos de acordo com o sistema de instrumentação: ProTaper Next, Twisted File, ProTaper Universal, e técnica manual crown-down. Outros 8 canais não contaminados foram utilizados como controle de assepsia. Amostra bacteriana foi coletada imediatamente após o prepare e aos 7 dias. A redução bacteriana foi calculada, e então feita a análise intergrupos utilizando teste t-pareado, e análise entre grupos utilizando os testes ANOVA e Tukey, todos com 5% de significância. Todas as técnicas reduziram significantemente o número de bactérias no canal radicular (p<0.05). ProTaper Next e Twisted File resultaram em maior redução bacteriana que ProTaper Universal e técnica manual (p<0.05). ProTaper Next e Twisted File foram semelhantes (p>0.05). Pode-se concluir que ProTaper Next e Twisted File promovem maior redução bacteriana que Protaper Universal e técnica manual.

Assuntos

RESUMO

OBJECTIVES: The purpose of this study was to assess the ability of ProTaper Gold (PTG, Dentsply Maillefer) in maintaining the original profile of root canal anatomy. For that, ProTaper Universal (PTU, Dentsply Maillefer) was used as reference techniques for comparison. MATERIALS AND METHODS: Twenty simulated curved canals manufactured in clear resin blocks were randomly assigned to 2 groups (n = 10) according to the system used for canal instrumentation: PTU and PTG groups, upto F2 files (25/0.08). Color stereomicroscopic images from each block were taken exactly at the same position before and after instrumentation. All image processing and data analysis were performed with an open source program (FIJI). Evaluation of canal transportation was obtained for two independent canal regions: straight and curved levels. Student's t test was used with a cut-off for significance set at α = 5%. RESULTS: Instrumentation systems significantly influenced canal transportation (p < 0.0001). A significant interaction between instrumentation system and root canal level (p < 0.0001) was found. PTU and PTG systems produced similar canal transportation at the straight part, while PTG system resulted in lower canal transportation than PTU system at the curved part. Canal transportation was higher at the curved canal portion (p < 0.0001). CONCLUSIONS: PTG system produced overall less canal transportation in the curved portion when compared to PTU system.

RESUMO

INTRODUCTION: Electronic working length measurement during root canal treatment in teeth with enlarged apical foramina is a challenge. The aims of this in vitro study were (1) to assess the influence of foramen widening on the accuracy of 5 different electronic foramen locators (EFLs) and (2) to compare the accuracy of EFLs in different foramen sizes. METHODS: The following EFLs were used: MiniApex, Root ZXII, iPex, Propex II, and Elements Apex Locator. Each EFL was used in 3 groups (n = 20) of extracted teeth, with foramen diameters of 0.27 mm (G27), 0.47 mm (G47), and 0.72 mm (G72). Working length was measured according to manufacturer's instructions and compared with visual measurements (control method). Results were classified as accurate (equal or differences ≤ 0.05 mm) or inaccurate (differences > 0.5 mm). RESULTS: In G27, all EFLs yielded accurate findings (intragroup reliability; Fisher exact test, P < .05), compared with only MiniApex, Root ZXII, and Elements Apex Locator in G47 and G72. MiniApex, Root ZXII, and Elements Apex Locator were similarly accurate regardless of foramen size. iPex and Propex II were the least accurate among the devices tested, and foramen diameter influenced their accuracy, with greater diameters yielding poorer EFL performance. CONCLUSIONS: Foramen diameter did not influence the accuracy of MiniApex, Root ZXII, and Elements Apex Locator EFLs. iPex and Propex II showed decreased accuracy as foramen size increased.

Assuntos

RESUMO

AIM: To compare the bacterial reduction achieved with reciprocating and rotary systems during root canal preparation. METHODOLOGY: Sixty distobuccal root canals of maxillary molars were contaminated with Enterococcus faecalis broth culture. After an incubation period of 21 days, bacterial samples were collected and cultured on m-Enterococcus agar plates. The root canals were divided into five groups, according to the system used for instrumentation: WaveOne, Reciproc, ProTaper, Mtwo and manual instrumentation. The negative controls consisted of five uncontaminated root canals that were subjected to the same instrumentations as each of the experimental groups. Bacterial samples were collected immediately and 7 days after instrumentation. Statistical analysis was performed by paired t-tests and anova tests. RESULTS: Compared with the samples before instrumentation, the bacterial count was significantly reduced after instrumentation in all groups, with no significant difference in bacterial count reduction amongst the reciprocating, rotary and manual techniques. However, the samples tested 7 days after instrumentation showed significantly higher bacterial counts than the samples tested immediately after instrumentation. CONCLUSIONS: All systems tested reduced bacterial counts to a similar level.

Assuntos

RESUMO

AIM: To assess the frequency in which the Reciproc instrument reaches the full working length (FWL) of mandibular molar canals without a glide path. METHODOLOGY: From a pool of mandibular molars, 253 root canals were classified as straight (G1) and, 249 root canals as moderately curved (G2) following Schneider's method. A R25 Reciproc instrument (VDW, Munich, Germany) was advanced in the canals without any previous glide path. All cases where Reciproc instruments reached the FWL were classified as 'Reaching the FWL' (RFWL). When the FWL was not reached by the R25, the root canals were classified as 'Not Reaching the FWL' (NRFWL). Pearson's χ(2) test compared (i) the frequency distributions of root canals classified as RFWL and NRFWL for each group and (ii) the frequency distributions of NRFWL canals between the groups. RESULTS: In G1, 9 cases (3.56%) and in G2, 23 canals (9.34%) were classified as NRFWL. The difference between NRFWL and RFWL was significant in both groups (P = 0.00, χ(2) = 217.2 for G1; P = 0.00, χ(2) = 167.8 for G2). The frequency of NRFWL was significantly higher for G2 (P = 0.02, χ(2) = 5.452). CONCLUSION: The R25 Reciproc instrument is able to reach the FWL of straight- and moderate-curved mandibular molar canals without a glide path in a large proportion of cases.

Assuntos

RESUMO

OBJECTIVE: The purpose of this study was to evaluate if the apical third enlargement of root canal is the determinant factor for the repair of periapical lesions in endodontic treatment. METHODS: Eighty upper and lower incisors, canines and premolars with periapical lesions were randomly divided in 2 groups and were treated by undergraduate students. Canals were instrumented with up to 3 files in group I (n = 40) and up to 4 files in group II (n = 40) 1 mm short of the apex and were filled with a calcium hydroxide dressing. After removing calcium hydroxide 14 days later, both groups were filled using the lateral condensation technique. In the 2-year follow-up, a few patients did not return, and some cases did not present conditions for accurate comparisons. Therefore, only 43 patients (24 in group I and 19 in group II) presented conditions for radiographic comparisons. Data were statistically analyzed using Fisher's exact test. RESULTS: Comparison of the initial and follow-up radiographs showed that 22 out of 24 (91.67%) patients in group I and 17 out of 19 patients (89.47%) in group II showed repair. Statistical analysis revealed no significant differences between the groups (P>.05). CONCLUSION: The results of this study show that the apical third enlargement did not alter the outcome of endodontic treatment of teeth with periapical lesion performed by undergraduate students.

RESUMO

Considering that instrumentation of the apical foramen has been suggested for root canal infection control, this study analyzed the relationship between the files that bind at the apical foramen and the foraminal openings in 50 maxillary central incisors. After preparation of the pulp chamber, access to the canal was obtained with #1 and 2 LA Axxess and K-files with tip cut were inserted up to the apical foramen until binding was felt. The files were fixed with methyl cyanoacrylate and the tooth-file sets were cross-sectioned 10 mm short of the apex. Scanning electron microscopic analysis was carried out and files and foraminal areas were measured using Image Tool software. Statistically significant difference (p<0.0001) was found between files and the apical foraminal areas. The mean foraminal area was 3.8 times larger than the mean file area. The results of this study suggest that it would require 4 files of greater size beyond the one that bound to the foramen in order to allow a better relationship between files and apical openings of maxillary central incisors.

Uma vez que a instrumentação do forame apical tem sido sugerida para o controle de infecção do canal radicular, este estudo analisou a relação entre as limas que se ajustam no forame apical e a abertura foraminal em cinquenta incisivos centrais superiores. Após o preparo da câmara pulpar, foi feito o acesso radicular com as brocas LA Axxess #1 e 2 e limas K com a ponta cortada foram inseridas até que oferecessem a sensação tátil de ajuste no forame apical. Foram fixadas com cianoacrilato de metila e o conjunto dente-lima foi seccionado a 10 mm aquém do ápice. Foi feita a microscopia eletrônica de varredura e as áreas das limas e dos forames foram medidas por meio do Image Tool software. A análise estatística demonstrou diferença significante entre as áreas das limas e dos forames (p<0,0001). A média da área dos forames apicais foi 3,8 vezes maior que a das limas. Os resultados deste estudo sugerem que seriam necessários 4 instrumentos de calibre maior além do que se ajustou para que haja melhor relação entre as limas e as aberturas foraminais nos incisivos centrais superiores.

Assuntos

RESUMO

This study used computed tomography (CT) to compare apical canal transportation in mesiobuccal canals of maxillary molars prepared with different techniques. Sixty teeth were assigned to 3 groups (n=20), according to the technique used for root canal instrumentation: hand instrumentation with K-Flexofiles, K-Flexofiles activated by an oscillatory system and ProTaper NiTi rotary system. Pre and post-instrumentation CT images were obtained 3 mm short of the apical foramen and were superimposed to compare canal transportation. Data were analyzed statistically by ANOVA and Tukey's test using the SPSS software (α=0.05). In the buccal direction, the manual technique produced significantly less canal transportation than the oscillatory technique (p<0.05) and both were similar to the rotary technique (p>0.05). In the distal and distopalatal directions, the oscillatory technique produced more canal transportation (p<0.05). In the mesiopalatal direction, the oscillatory technique produced more canal transportation than the manual technique (p<0.05), and both were similar to the rotary technique (p>0.05). In conclusion, all techniques produced canal transportation, and the oscillatory technique produced the greatest removal of root dentin toward the innerside of the root curvature.

Este estudo utilizou a tomografia computadorizada (TC) para comparar o transporte do canal radicular nos canais mésio-vestibulares de molares superiores preparados por diferentes técnicas. Sessenta molares superiores foram divididos em 3 grupos (n=20) de acordo com a técnica utilizada para o preparo do canal radicular: instrumentação manual com limas K-Flexofile, limas K-Flexofile acopladas a um sistema oscilatório e sistema rotatório ProTaper. Imagens de TC pré e pós-instrumentação foram obtidas 3 mm aquém do forame apical e superpostas para comparar o transporte do canal. Os dados foram analisados estatisticamente pela Análise de Variância (ANOVA) e Teste de Tukey utilizando o software SPSS (α=0,05). Na direção vestibular, a técnica manual produziu significantemente menos transporte do canal radicular do que a técnica oscilatória (p<0,05) e ambas foram similares a técnica rotatória (p>0,05). Nas direções distal e disto-palatina, a técnica oscilatória produziu mais transporte do canal radicular (p<0,05). Na direção mésio-palatina, a técnica oscilatória produziu mais transporte do canal radicular do que a técnica manual (p<0,05), sendo que ambas foram similares à técnica rotatória (p>0,05). Em conclusão, todas as técnicas produziram transporte do canal radicular e a técnica oscilatória produziu os maiores desgastes de dentina na direção interna da curvatura.

Assuntos

RESUMO

This study investigated the occurrence of canal transportation in the apical third of simulated root canals instrumented with progressive and constant taper shaft designed rotary instruments. Thirty simulated resin canals were prepared with progressive taper (ProTaper Universal) and constant taper (Hero 642 and K3) Ni-Ti rotary systems, with 10 canals per group. The pre and post-instrumentation images of the canals were superimposed and the composite images were analyzed with Image Pro Plus 5.0 software. Centering ability of the instruments was assessed by subtracting the amount of resin removed at the inner wall from that removed at the outer wall. Total amount (in mm) of resin removed was recorded by adding the amount of resin removed at the inner and outer walls, comparing the pre and post-preparation images. Data were analyzed statistically by Kruskal Wallis and Median tests (α=5%). There was statistically significant difference (p<0.05) among the groups. ProTaper produced the greatest canal transportation in the apical third. In conclusion, canal transportation occurred in all groups; the constant taper rotary instruments (Hero 642 and K3) presented greater centering ability towards the original canal curve and caused less canal transportation than the progressive taper instruments (ProTaper).

Este estudo investigou a ocorrência do transporte do canal no terço apical de canais simulados preparados com instrumentos rotatórios de conicidade progressiva e constante. Trinta canais simulados em blocos de resina foram preparados com sistemas rotatórios de Ni-Ti de conicidade progressiva (ProTaper Universal) e de conicidade constante (Hero 642 e K3), com 10 canais simulados por grupo. As imagens pré e pós-operatórias dos canais foram superpostas e analisadas com o Programa Image Pro Plus 5.0. A capacidade de manter a centralização do canal foi avaliada pela subtração da quantidade de resina removida da parede interna daquela removida na parede externa. A quantidade total de resina (em mm) removida foi obtida por meio da soma da resina removida das paredes internas e externas do canal, comparando as imagens pré e pós-operatórias. Os dados foram analisados estatisticamente pelo teste de Kruskal Wallis e Teste das medianas (α=5%). Houve diferença estatisticamente significativa (p<0.05) entre os grupos. O Sistema ProTaper produziu o maior transporte do canal no terço apical. Em conclusão, o transporte do canal ocorreu em todos os grupos; os intrumentos rotatórios de conicidade constante (Hero 642 e k3) apresentaram uma grande capacidade de manter o canal centrado e causaram menos transporte do canal do que os instrumentos de conicidade progressiva (ProTaper).

Assuntos

RESUMO

O objetivo deste estudo foi avaliar a espessura mínima radicular remanescente e o desgaste porcentual do terço cervical em raízes mesiais de molares inferiores, após a instrumentação com as técnicas ProTaper Universal e Lima única F2. Foram obtidos 100 primeiros molares inferiores com raízes completamente separadas. Desse total, foram selecionados e incluídos no estudo somente 22 que possuíam dois canais distintos na raiz mesial, comprimento entre 20 e 22 mm e grau de curvatura da raiz mesial com angulação variando entre 10° e 20°. Destes, 8 foram eliminados por possuírem uma anatomia muito discrepante, o que limitava o processamento e análise digital das imagens (PADI). Os dentes foram acessados e a patência apical foi realizada em todos os canais determinando o comprimento de trabalho. Em cada dente, cada canal mesial foi instrumentado por uma técnica diferente. As amostras foram posicionadas em um dispositivo de montagem e digitalizadas através de microtomografia computadorizada antes e depois de serem completamente instrumentadas. O volume de interesse, correspondente à região de zona de risco, com uma grande margem de tolerância, tanto em direção apical quanto em direção cervical, foi determinado por 234 fatias, totalizando um comprimento vertical de 3,5 mm, para avaliação quantitativa comparativa. Através de PADI mediu-se, de forma automática, a espessura mínima radicular nos dois canais mesiais, antes e após a instrumentação, para todas as fatias de todos os dentes. A partir destes dados foi calculado o desgaste porcentual. Após o tratamento estatístico das mais de 6500 medidas obtidas, pôde-se concluir que não existiu diferença no desgaste da zona de risco produzido pelas duas técnicas de instrumentação testadas. Em todos os casos a espessura radicular remanescente permaneceu dentro de uma margem de segurança, não havendo, portanto, nenhum caso de rasgo ou perfuração. Dessa forma, ambas as técnicas estudadas foram consideradas seguras quanto ao ...

The aim of the present study was to evaluate the minimal remaining root canal thickness and percentage of dentin removed of the cervical third of the mesial roots mandibular molars after instrumentation with the ProTaper Universal and Single File F2 Techniques. From a total of 100 teeth, only 22 were selected and included in the study by having two distinct canals in the mesial root with length between 20 and 22 mm and degree of curvature presenting angle between 10° and 20°. Eight specimens were eliminated because they have a very disparate anatomy that limited the digital processing and analysis of the images (PADI). The teeth were accessed and patency was performed in all canals determining the working length. In each tooth, each mesial canal was instrumented by a different technique. The samples were placed in a mounting device and scanned by microcomputed tomography before and after instrumentation. The corresponding volume of interest to the region of the risk zone was determined by 234 slices, with a total vertical length of 3.5 mm, for quantitative comparative evaluation with a high degree of tolerance. The PADI performed the measures automatically of the minimal thickness of root in both mesial canals, before and after instrumentation for all slices of each tooth. From these data, the percentage of dentin removed was calculated. After statistical analysis of more than 6500 measurements, it was concluded that there was no difference in the wear of the risk zone produced by the two instrumentation techniques tested. In all instrumented specimens, the root thickness remained within a security margin, thus, no case of strip perforation was ...

Assuntos

RESUMO

This in vitro study compared, using computed tomography (CT), the amount of dentin removed from root canal walls by manual and mechanical rotary instrumentation techniques. Forty mandibular incisors with dental crown and a single canal were selected. The teeth were randomly assigned to two groups, according to the technique used for root canal preparation: Group I - manual instrumentation with stainless steel files; Group II - mechanical instrumentation with RaCe rotary nickel-titanium instruments. In each tooth, root dentin thickness of the buccal, lingual, mesial and distal surfaces in the apical, middle and cervical thirds of the canal was measured (in mm) using a multislice CT scanner (Siemens Emotion, Duo). Data were stored in the SPSS v. 11.5 and SigmaPlot 2001 v. 7.101 softwares. After crown opening, working length was determined, root canals were instrumented and new CT scans were taken for assessment of root dentin thickness. Pre- and post-instrumentation data were compared and analyzed statistically by ANOVA and Tukey's post-hoc test for significant differences (p=0.05). Based on the findings of this study, it may be concluded that regarding dentin removal from root canal walls during instrumentation, neither of the techniques can be considered more effective than the other.

Este estudo in vitro avaliou comparativamente, por meio de tomografia computadorizada (TC), a quantidade de dentina removida das paredes do canal radicular utilizando-se as técnicas de preparo manual e automatizada de instrumentação rotatória. Foram selecionados 40 incisivos inferiores com coroa dental e um único canal. Os dentes foram divididos aleatoriamente em 2 grupos, de acordo com a técnica empregada para o preparo dos canais radiculares: Grupo I - técnica manual com limas manuais de aço inoxidável e Grupo II - técnica automatizada de movimentos rotatórios RaCe com limas de níquel-titânio. Em cada dente, procedeu-se à mensuração (em mm) da espessura da dentina radicular nas faces vestibular, lingual, mesial e distal dos terços apical, médio e cervical por meio de tomografia computadorizada multislice (Siemens Emotion, Duo). Os dados coletados foram armazenados utilizando-se os softwares SPSS versão 11.5 e SigmaPlot 2001 v. 7.101 (SPSS Inc.). Após a abertura coronária, o comprimento de trabalho foi estabelecido, os canais radiculares foram instrumentados e novas tomadas de tomografia computadorizada foram realizadas para mensuração da espessura das paredes dentinárias radiculares. Os dados obtidos antes e após o preparo biomecânico dos canais foram comparados. Os resultados foram estatisticamente por meio de análise de variância (ANOVA) com localização de diferenças post hoc de Tukey (p=0,05). Com base nos achados desse estudo, pode-se concluir que: com relação à remoção de dentina das paredes dos canais radiculares durante a instrumentação nenhuma das técnicas avaliadas pode ser apontada como mais efetiva que a outra.

Assuntos