RESUMO

Sabe-se que para uma restauração ser considerada um sucesso clínico é preciso que haja uma concomitância saudável entre a estrutura dentária, o material restaurador e as estruturas biológicas periodontais. As restaurações transcirúrgicas caracterizam-se como procedimentos alternativos para possibilitar a restauração de dentes com cárie dentária extensa, restaurações subgengivais desadaptadas e fraturas. O presente estudo teve como objetivo realizar um relato de caso de um procedimento cirúrgico-restaurador, através de uma técnica de restauração transcirúrgica. Este estudo tem como justificativa relatar um caso clínico, colaborando com maiores informações sobre a escolha da técnica a ser empregada, mostrando em quais situações devemos escolher uma restauração transcirúrgica e quais seus benefícios. Também, salientar se devemos fazer a recuperação do espaço biológico do periodonto ou não(AU)

It is known that for a restoration to be considered a clinical success, there must be a healthy concomitance between the tooth structure, the restorative material and the periodontal biological structures. Transsurgical restorations are characterized as alternative procedures to enable the restoration of teeth with extensive dental caries, maladapted subgingival restorations and fractures. The present study aims to carry out a case report of a surgical-restorative procedure, using a transsurgical restoration technique. This study is justified by reporting a clinical case, providing more information on the choice of technique to be used, showing in which situations we should choose a transsurgical restoration and what its benefits are. Also, highlight whether we should recover the biological space of the periodontium or not(AU)

Assuntos

RESUMO

Restaurações diretas em resina composta são amplamente utilizadas em odontologia para restaurar dentes posteriores. Todavia, quando há grande destruição coronária, onde a distância do istmo excede dois terços da distância intercuspídea, as restaurações indiretas em resina composta são indicadas. O presente estudo teve como objetivo relatar a análise de um prontuário de um paciente que recebeu uma restauração indireta em resina composta em dente posterior amplamente destruído. Através da análise de prontuários de pacientes atendidos nas disciplinas de Estágios Supervisionados do Curso de Odontologia da FSG Centro Universitário no ano de 2023, foi selecionado um prontuário de um paciente que compareceu a clínica odontológica da FSG com uma restauração em amálgama fraturada com reparo em resina composta que apresentou sintomatologia dolorosa. O procedimento diagnóstico ocorreu através de exame clínico e radiográfico, que constatou a indicação de substituição da restauração insatisfatória e realização de uma restauração indireta em resina composta. Os resultados estéticos e funcionais apresentados demostraram a viabilidade da técnica restauradora indireta em resina composta para reabilitar dentes posteriores com ampla destruição coronária(AU)

Direct composite resin restoration are widely used in dentistry to restore posterior teeth. However, when there is large coronary destruction, that the distance from the isthmus exceeds two- thirds of the intercuspal distance, indirect composite resin restorations are indicated. This study aimed to report the analysis of a dental record of a patient who received an indirect restoration in composite resin in a badly destroyed posterior tooth. Through the analysis of dental records of patients seen in the disciplines of Supervised Internship of the Dentistry Course at FSG Centro Universitário in the year 2023, the dental record of a patient who attended the FSG dental clinic with fractured amalgam restoration with composite resin repair was selected who had painful symptoms. The diagnostic procedure took place through clinical and radiographic examination, which revealed the indication of replacing the unsatisfactory restoration and carrying out an indirect restoration in composite resin.The aesthetic and functional results presented demonstrated the viability of the indirect composite resin restoration technique for rehabilitating posterior teeth with extensive coronal destruction(AU)

Assuntos

RESUMO

INTRODUCTION: The aim of this study was to evaluate the volume of dentin removal and the volume of remnants of restorative material after the removal of an esthetic restorative coronal set and cervical barrier in endodontically treated mandibular molars with the aid of different magnification methods using 3-dimensional (3D) micro-computed tomographic (micro-CT) morphometric analysis. METHODS: A sample of 30 mandibular first molars (N = 30) was used. All teeth were endodontically treated, and the specimens were initially scanned using micro-CT imaging and reconstructed. The molars were filled by a single-cone technique, and immediately the material at the initial 2-mm cervical level was removed. Cervical barriers were confected using ionomer glass cement with fluorescein 0.1%, filling the 2 mm at the cervical level of the canals and an additional 2 mm as the base. The coronal restoration set was performed using esthetic resin composites. A simulated tooth aging process was performed with 20,000 thermocycling cycles. The sample was distributed into the following 3 groups (n = 10) for the removal of the restoration set and cervical barrier with diamond burs based on the magnification aid: no magnification aid (naked eye), operative microscope aid, and REVEAL device (Design for Vision Inc, Bohemia, NY) aid. After removal, the final 3D micro-CT scanning and reconstruction were conducted with the same parameters as the initial scanning, and superposition of the final and initial scanning was performed. Morphometric analysis was conducted using CTAn software (Bruker microCT, Kontich, Belgium) to assess the volume of remnant restorative material (mm³), the volume of dentin removal (mm³), and the direction and site of dentin removal. Data were analyzed using 1-Way analysis of variance (P < .05). RESULTS: The REVEAL group showed better results regarding the volume of remnant material (3.17 ± 1.65) and the percentage of dentin removal (2.56 ± 1.34). The microscope group showed no statistical difference compared with the REVEAL group regarding dentin removal (3.30 ± 1.48) and was statistically similar to the naked eye group in the volume of remnant material (9.63 ± 4.33). The naked eye group showed the worst results for the volume of remnant material (7.60 ± 2.68) and the percentage of dentin removal (6.60 ± 3.70). CONCLUSIONS: The use of fluorescence associated with magnification was the method that presented the best results, with lower percentages of dentin removal and smaller volumes of remaining restorative material. This is an innovative technology in endodontics that shows potential to overcome the challenge of reaccessing root canals in the context of endodontic retreatment.

Assuntos

RESUMO

OBJECTIVE: This scoping review aimed to identify and describe the available evidence on the effect of magnifying devices (loupe or microscope) on the performance of restorative dental preparations. MATERIALS AND METHODS: This study was conducted according to the PRISMA-ScR guidelines for scoping reviews and registered on the INPLASY database. An electronic search was performed in four databases and Grey literature for articles published until November 2023. Eligibility criteria were determined using the PICOS strategy and comprised studies that evaluated the performance of magnification devices for restorative dental preparations. A bibliographic mapping of the evidence was conducted. RESULTS: Sixteen studies met the inclusion criteria. Most of the studies (n = 12) compared the performance of dental preparations using magnification loupes vs. no magnification. The magnification for loupes and microscopes ranged from 2.5x to 4.0x and 6.4x to 10x, respectively. The use of magnifying loupes improved the performance of restorative preparations in 66.6% of the evaluated studies. However, when the magnifications were compared, the greater magnification provided by microscopes did not improve preparation performance compared to magnification loupes. Regarding the place of publication, the American continent concentrates the most significant number of evidence. CONCLUSIONS: Although evidence for magnification improving the performance of dental preparations has increased over the last decade, basically only in vitro studies (most of which have taken place in the Americas) have been reported in the literature. The evidence suggests that magnification significantly improves restorative preparation performance when compared to non-magnification. However, higher magnifications (e.g., microscopes) do not appear to improve tooth preparation performance compared with lower magnification devices (e.g., magnification loupes). CLINICAL RELEVANCE: Available evidence supports that using magnification can improve the performance of restored tooth preparations. However, high magnifications have no advantages over lower magnifications.

Assuntos

RESUMO

This report describes multidisciplinary care combining orthodontics and restorative dentistry for a patient with Class II occlusion and stained mandibular and maxillary resin composite veneers. The orthodontic treatment improved severe overjet and malocclusion prior to restorative care. Occlusal assessment was provided with a novel digital device (PlaneSystem, Zirkonzahn) that is integrated with digital workflows for the evaluation of the occlusal plane and condylar path inclination. Diagnostic digital impressions and digital wax-up for intraoral mock-ups led to the patient's treatment acceptance. Minimally invasive tooth preparation, final digital impressions, and bonding under dental dam isolation fulfilled the patient's esthetic and functional demands with all-ceramic restorations.

RESUMO

Aims: This study aims to comprehensively examine the surface morphology of fiber posts after undergoing various disinfection methods, utilizing scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). Materials and Methods: Twenty-one fiber posts were randomly allocated into seven experimental groups, each consisting of three samples. The disinfection methods employed were as follows: GC - no disinfection treatment; GAL - immersion in 70% alcohol, following the manufacturer's recommended protocol; GHP - soaking in 2.5% sodium hypochlorite for a duration of 10 minutes; GCL - soaking in 2% chlorhexidine gluconate for a period of five minutes; GAC - 30-second etching with 35% phosphoric acid; GPH - soaking in 10% hydrogen peroxide for a duration of 20 minutes; and GSL - autoclave sterilization. Following the disinfection procedures, SEM was employed to scrutinize the surface topography of the posts, while EDX was utilized to identify the chemical elements present on the sample surfaces. Subsequently, a descriptive analysis was conducted on the SEM images and EDX data. Results: SEM analysis revealed that all groups exhibited regions with epoxy resin-coated fibers alongside sections with exposed glass fibers. Analysis of the EDX data indicated that there were no significant differences in the predominant chemical elements across the groups. Carbon (C) and oxygen (O) registered the highest peaks, followed by silicon (Si), zirconium (Zr), sodium (Na), aluminum (Al), and calcium (Ca). Conclusions: The disinfection methods under investigation did not induce substantial alterations in the surface morphology of the fiber posts.

RESUMO

BACKGROUND: The survival of ART restorations can be influenced by the choice of the restorative material. The aim of this randomized non-inferiority controlled trial was to compare the 2-year survival rate and cost analysis of two encapsulated glass ionomer cements (GIC) as occlusoproximal restorative materials in primary molars. METHODS: Children from public schools in Tietê (Brazil), aged 4-8 years with occlusoproximal dentine carious lesions in primary molars were selected and randomly assigned to receive either Equia Forte (EF) or Riva Self Cure (RSC) as restorative materials. Treatment was carried out by two trained final-year dental students in schools following ART premises. Restorations were assessed by a trained and calibrated examiner after 2, 6, 12, 18, and 24 months. The primary outcome was restoration survival after 2 years, analyzed using Kaplan-Meier survival and Cox regression analysis (α = 5%). Professional and materials costs for each group were collected in Brazilian Reais (R$) and converted into US dollars (US$) and analyzed using Monte-Carlo simulation. RESULTS: A total of 152 children (76 per group) were included in the study, and 121 (79%) were evaluated after 2 years. The overall 2-year restoration survival rate was 39% (EF = 45%; RSC = 32%) with no difference between the groups. The baseline and 2-year total cost of restorations using RSC was lower when compared to EF (incremental cost: US$ 6.18). CONCLUSION: After two years of follow-up, Riva Self Cure shows comparable restoration survival rates to Equia Forte, being more cost-effective in the Brazilian perspective. TRIAL REGISTRATION: This randomized clinical trial was registered on ClinicalTrials.Gov - NCT02730000.

Assuntos

RESUMO

OBJECTIVES: To undertake a cost-effectiveness analysis of restorative treatments for a first permanent molar with severe molar incisor hypomineralization from the perspective of the Brazilian public system. MATERIALS AND METHODS: Two models were constructed: a one-year decision tree and a ten-year Markov model, each based on a hypothetical cohort of one thousand individuals through Monte Carlo simulation. Eight restorative strategies were evaluated: high viscosity glass ionomer cement (HVGIC); encapsulated GIC; etch and rinse adhesive + composite; self-etch adhesive + composite; preformed stainless steel crown; HVGIC + etch and rinse adhesive + composite; HVGIC + self-etch adhesive + composite, and encapsulated GIC + etch and rinse adhesive + composite. Effectiveness data were sourced from the literature. Micro-costing was applied using 2022 USD market averages with a 5% variation. Incremental cost-effectiveness ratio (ICER), net monetary benefit (%NMB), and the budgetary impact were obtained. RESULTS: Cost-effective treatments included HVGIC (%NMB = 0%/ 0%), encapsulated GIC (%NMB = 19.4%/ 19.7%), and encapsulated GIC + etch and rinse adhesive + composite (%NMB = 23.4%/ 24.5%) at 1 year and 10 years, respectively. The benefit gain of encapsulated GIC + etch and rinse adhesive + composite in relation to encapsulated GIC was small when compared to the cost increase at 1 year (gain of 3.28% and increase of USD 24.26) and 10 years (gain of 4% and increase of USD 15.54). CONCLUSION: Within the horizon and perspective analyzed, the most cost-effective treatment was encapsulated GIC restoration. CLINICAL RELEVANCE: This study can provide information for decision-making.

Assuntos

RESUMO

We aimed to evaluate the impact of 2 visual diagnostic strategies for assessing secondary caries and managing permanent posterior restorations on long-term survival. We conducted a diagnostic cluster-randomized clinical trial with 2 parallel groups using different diagnostic strategies: (C+AS) based on caries assessment, marginal adaptation, and marginal staining aspects of the FDI (World Dental Federation) criteria and (C) based on caries assessment using the Caries Associated with Restorations or Sealants (CARS) criteria described by the International Caries Detection and Assessment System (ICDAS). The treatment for the restoration was conducted based on the decision made following the allocated diagnostic strategy. The restorations were then clinically reevaluated for up to 71 mo. The primary outcome was restoration failure (including tooth-level failure: pain, endodontic treatment, and extraction). Cox regression analyses with shared frailty were conducted in the intention-to-treat population, and hazard ratios (HRs) and 95% confidence intervals (95% CIs) were derived. We included 727 restorations from 185 participants and reassessed 502 (69.1%) restorations during follow-up. The evaluations occurred between 6 and 71 mo. At baseline, C led to almost 4 times fewer interventions compared with the C+AS strategy. A total of 371 restorations were assessed in the C group, from which 31 (8.4%) were repaired or replaced. In contrast, the C+AS group had 356 restorations assessed, from which 113 (31.7%) were repaired or replaced. During follow-up, 34 (9.2%) failures were detected in the restorations allocated to the C group and 30 (8.4%) allocated to the C+AS group in the intention-to-treat population, with no significant difference between the groups (HR = 0.83; 95% CI = 0.51 to 1.38; P = 0.435, C+AS as reference). In conclusion, a diagnostic strategy focusing on marginal defects results in more initial interventions but does not improve longevity over the caries-focused strategy, suggesting the need for more conservative approaches.

Assuntos

RESUMO

Objectives: This study aimed to assess the effects of different magnification systems on the angular deviations of the neck and trunk and the muscle activities of the upper back and neck during preclinical cavity preparation. Methods: This was an experimental laboratory study, with the angular deviations from the neutral positions of the neck and trunk and the activities of the bilateral upper back (the descending and ascending trapezius) and neck (sternocleidomastoid) muscles as the dependent variables. The independent variables were the different magnification systems used (Simple, Galilean, and Keplerian loupes, with direct vision as the control) and prepared teeth (teeth 16, 26, 36, and 46). A dental mannequin phantom head with artificial resin teeth was used, and Class I cavity preparations for composite resin were performed on teeth 16, 26, 36, and 46 using a 1012 round diamond bur at low speed. To analyze the angular deviations, the postures adopted during the procedure were recorded using a tripod-mounted camera positioned to provide a lateral view of the operator. A trained researcher measured the angular deviations using the software entitled "Software for Postural Assessment"-SAPO (version 0.69). Bilateral muscle activity was assessed using surface electromyography. Descriptive statistical analysis was performed, and after verifying the assumptions of normality and homoscedasticity, two-way analysis of variance and the Tukey and Games-Howell post-hoc tests were used to compare the data (α=0.05). Results: The angular deviation from the neutral position of the neck was found to be significantly higher during cavity preparations performed with the naked eye and the Simple loupe, irrespective of the prepared tooth. With regard to tooth location, the angular deviation of the neck was significantly greater during cavity preparation on teeth 16 and 26, and the angular deviation of the trunk was significantly greater during cavity preparation on tooth 26, regardless of the magnification system used. There were significant differences in right sternocleidomastoid muscle activity between the Simple, Galilean, and Keplerian loupes, with activity being the lowest for the Galilean loupe (p = 0.008). There were no significant differences in left sternocleidomastoid muscle activity between the loupes, regardless of the prepared tooth (p = 0.077). The activities of the bilateral descending trapezius and the right ascending trapezius muscles were significantly lower when the Galilean loupe was used (p < 0.010). Conclusion: These results suggest that the Galilean loupe resulted in lower muscle activity in the neck and back regions and that the Galilean and Keplerian loupes resulted in less angular deviations of the neck and trunk during cavity preparation.

Assuntos

RESUMO

The evaluation of water sorption and solubility is pivotal for the development of new resin-based restorative materials with the potential for clinical application. The purpose of the present study was to evaluate the influence of the specimen dimension, water immersion protocol, and surface roughness on the water sorption and solubility of three resin-based restorative materials. Disk-shaped specimens of 15 mm × 1 mm, 10 mm × 1 mm, and 6 mm × 1 mm were produced with a composite resin (Z100), a resin cement (RelyX ARC), and an adhesive system (Single Bond 2-SB2). The specimens were immersed in distilled water according to four protocols: ISO (all the specimens for each group were vertically immersed in 50 mL); IV-10 (the specimens were individually and vertically immersed in 10 mL); IH-10 (the specimens were individually and horizontally immersed in 10 mL); and IH-2 (the specimens were individually and horizontally immersed in 2 mL). The surface roughness (Sa and Sp) was evaluated using an atomic force microscope, and the degree of conversion was determined using FT-IR spectrometry. The specimen dimension and water immersion protocol had no effect on water sorption and solubility. For the three resin-based restorative materials, Sp was higher than Sa. The degree of conversion was not influenced by the specimen dimension. The variations in the specimen dimension and water immersion protocol compared to those determined by ISO 4049 did not prevent the comparison between the values of water sorption and solubility obtained for a given resin-based restorative material.

RESUMO

Objective: In response to the demand for dental implants, extensive research has been conducted on methods for transferring load to the surrounding bone. This study aimed to evaluate the stresses on the peripheral bone, implants, and prostheses under scenarios involving of the following variables: prosthesis designs, vertical bone heights, load angles, and restorative materials. Material and Methods: Three implants were inserted in the premolar and molar regions (5-6-7) of the two mandibular models. Model 1 represented 0 mm marginal bone loss and Model 2 simulated 3 mm bone loss. CAD/CAM-supported materials, hybrid ceramic (HC), resin-nano ceramic (RNC), lithium disilicate (LiSi), zirconia (Zr), and two prosthesis designs (splinted and non-splinted) were used for the implant-supported crowns. Forces were applied vertically (90°) to the central fossa and buccal cusps and obliquely (30°) to the buccal cusps only. The stresses were evaluated using a three-dimensional Finite Element Analysis. Results: Oblique loading resulted in the highest stress values. Of the four materials, RNC showed the low stress in the restoration, particularly in the marginal area. The use of different restorative materials did not affect stress distribution in the surrounding bone. The splinted prostheses generated lower stress magnitude on the bone, and while more stress on the implants were observed. Conclusion: In terms of the stress distribution on the peri-implant bone and implants, the use of different restorative materials is not important. Oblique loading resulted in higher stress values, and the splinted prosthesis design resulted in lower stress (AU)

Objetivo: Em resposta à demanda por implantes dentários, extensa pesquisa foi realizada sobre métodos para transferir carga ao osso circundante. Este estudo buscou avaliar os estresses no osso periférico, implantes e próteses em cenários que envolvem as seguintes variáveis: designs de próteses, alturas ósseas verticais, ângulos de carga e materiais restauradores. Material e Métodos: Três implantes foram inseridos nas regiões dos pré-molares e molares (5-6-7) de dois modelos de mandíbula. O Modelo 1 representou perda óssea marginal de 0 mm e o Modelo 2 simulou perda óssea de 3 mm. Materiais suportados por CAD/CAM, cerâmica híbrida (HC), cerâmica nano-resina (RNC), dissilicato de lítio (LiSi), zircônia (Zr) e dois designs de próteses (sintetizadas e não-sintetizadas) foram utilizados para as coroas suportadas por implantes. Forças foram aplicadas verticalmente (90°) à fossa central e cúspides bucais e obliquamente (30°) apenas às cúspides bucais. Os estresses foram avaliados usando Análise de Elementos Finitos tridimensional. Resultados: Cargas oblíquas resultaram nos valores mais altos de estresse. Entre os quatro materiais, RNC mostrou baixo estresse na restauração, especialmente na área marginal. O uso de diferentes materiais restauradores não afetou a distribuição de estresse no osso circundante. Próteses sintetizadas geraram menor magnitude de estresse no osso, enquanto mais estresse nos implantes foi observado. Conclusão: Em termos de distribuição de estresse no osso peri-implantar e implantes, o uso de diferentes materiais restauradores não é crucial. Cargas oblíquas resultaram em valores mais altos de estresse, e o design de prótese sintetizada resultou em menor estresse. (AU)

Assuntos

RESUMO

Dental zirconias have been broadly utilized in dentistry due to their high mechanical properties and biocompatibility. Although initially introduced in dentistry as an infrastructure material, the high rate of technical complications related to veneered porcelain has led to significant efforts to improve the optical properties of dental zirconias, allowing for its monolithic indication. Modifications in the composition, processing methods/parameters, and the increase in the yttrium content and cubic phase have been presented as viable options to improve zirconias' translucency. However, concerns regarding the hydrothermal stability of partially stabilized zirconia and the trade-off observed between optical and mechanical properties resulting from the increased cubic content remain issues of concern. While the significant developments in polycrystalline ceramics have led to a wide diversity of zirconia materials with different compositions, properties, and clinical indications, the implementation of strong, esthetic, and sufficiently stable materials for long-span fixed dental prostheses has not been completely achieved. Alternatives, including advanced polycrystalline composites, functionally graded structures, and nanosized zirconia, have been proposed as promising pathways to obtain high-strength, hydrothermally stable biomaterials. Considering the evolution of zirconia ceramics in dentistry, this manuscript aims to present a critical perspective as well as an update to previous classifications of dental restorative ceramics, focusing on polycrystalline ceramics, their properties, indications, and performance.

RESUMO

OBJECTIVES: To answer the following research question: does the clinical evaluation of restorations on permanent teeth with bioactive materials show greater retention rates than those with non-bioactive materials? MATERIALS AND METHODS: A search strategy was used in the following databases: MEDLINE via PubMed, Scopus, Web of Science, LILACS, BBO, Embase, The Cochrane Library, and OpenGrey. Randomized controlled trials (RCTs), with a minimum of 2-year follow-up and evaluating at least one bioactive material in permanent teeth were included. Risk of bias was detected according to the Cochrane Collaboration tool for assessing the risk of bias (RoB 2.0), and network meta-analysis was performed using a random-effects Bayesian-mixed treatment comparison model. RESULTS: Twenty-seven studies were included. The success of the restorations was assessed using modified USPHS system in 24 studies and the FDI criteria in 3 studies. Network meta-analysis revealed three networks based on restoration preparations. Resin composites were ranked with higher SUCRA values, indicating a greater likelihood of being the preferred treatment for class I, II, and III restorations. In class V, resin-modified glass ionomer cement was ranked with the highest value. CONCLUSION: Bioactive restorative materials showed similar good clinical performance in terms of retention similarly to conventional resin composites. CLINICAL SIGNIFICANCE: The findings must be interpreted with caution because many RCT on restorative materials aim to verify the equivalence of new materials over the gold standard material rather than their superiority. The present systematic review also suggests that new RCT with longer follow-up periods are necessary.

Assuntos

RESUMO

In dentistry, various animal models are used to evaluate adhesive systems, dental caries and periodontal diseases. Metalloproteinases (MMPs) are enzymes that degrade collagen in the dentin matrix and are categorized in over 20 different classes. Collagenases and gelatinases are intrinsic constituents of the human dentin organic matrix fibrillar network and are the most abundant MMPs in this tissue. Understanding such enzymes' action on dentin is important in the development of approaches that could reduce dentin degradation and provide restorative procedures with extended longevity. This in silico study is based on dentistry's most used animal models and intends to search for the most suitable, evolutionarily close to Homo sapiens. We were able to retrieve 176,077 mammalian MMP sequences from the UniProt database. These sequences were manually curated through a three-step process. After such, the remaining 3178 sequences were aligned in a multifasta file and phylogenetically reconstructed using the maximum likelihood method. Our study inferred that the animal models most evolutionarily related to Homo sapiens were Orcytolagus cuniculus (MMP-1 and MMP-8), Canis lupus (MMP-13), Rattus norvegicus (MMP-2) and Orcytolagus cuniculus (MMP-9). Further research will be needed for the biological validation of our findings.

RESUMO

PURPOSE: This study aimed to assess the bonding stability of three universal adhesives to a CAD-CAM feldspathic ceramic with or without prior silane application. MATERIALS AND METHODS: The universal adhesives tested were Ambar Universal (FGM), Single Bond Universal (3M), and Ybond Universal (Yller). Scotchbond Multipurpose Plus (3M) was used as a control. The silane used was RelyX Ceramic Primer (3M). Microtensile bond strength (µTBS) to Vitablocs Mark II was measured after 24 h or 6 months of water aging (n = 20). Failure modes were observed through scanning electron microscopy, and pH and degree of C=C conversion (DC) of the adhesives were measured (n = 3). Data were analyzed using one-, two-, and three-way ANOVA. RESULTS: The pH values differed significantly among the adhesives (p < 0.001), while the DC was similar (p = 0.141). The universal adhesives showed significant differences in µTBS, with higher immediate results when using silane and lower results after aging. Notably, a significant decrease in µTBS was observed after 6 months when silane was applied. In contrast, the control adhesive exhibited consistent results between the 24-h and 6-month storage periods. The universal adhesives showed a decrease in µTBS ranging from 25.5% to 40.1% after prolonged storage. Adhesive failures were predominant in all groups. The presence or absence of silane in the adhesive composition did not affect the bonding performance. CONCLUSIONS: The application of a separate silane coupling agent improved the immediate bond strength of universal adhesives to CAD-CAM feldspathic ceramic. However, this bond strength significantly decreased after 6 months of water aging. The bond strength remained stable for universal adhesives when applied without silane after 6 months of aging.

RESUMO

Aim: This study evaluated the short-term clinical and microbiological performance of resin-modified glass ionomer cement (RM-GIC) cement containing chlorhexidine (CHX) for atraumatic restorative treatment (ART) in primary teeth. Materials and methods: The clinical trial was conducted in 36 children that received ART in primary molars either with GIC (group I, n = 18) or GIC containing 1.25% CHX (group II, n = 18). The survival rate of restorations was checked 7 days, 3, and 6 months after their application when saliva and biofilm were collected for microbiological assessment of mutans streptococci (MS) counts. Data were analyzed using the Kruskal-Wallis/Mann-Whitney U tests for clinical analysis and microbiological evaluations (p < 0.05). Results: The survival rate of restorations was similar comparing groups I with II. Microbiological analysis showed a significant reduction in MS levels 7 days after the treatment in both saliva and biofilm of children treated with RM-GIC containing CHX (group II); however, MS counts at 3 and 6 months did not differ from the initial counts. Conclusion: A total of 1.25% CHX improved the microbiological properties of GIC in the short term without impairing the clinical performance of ART restorations. Clinical significance: Glass ionomer cement (GIC) containing CHX could be an alternative in ART procedures with the objective of promoting an additional antimicrobial effect, which is interesting for children with high counts of MS during the initial phase of adaptation to dental treatment. How to cite this article: da Silva ME, de Sena MD, Colombo NH, et al. Short-term Clinical and Microbiological Performance of Resin-modified Glass Ionomer Cement Containing Chlorhexidine for Atraumatic Restorative Treatment. Int J Clin Pediatr Dent 2023;16(S-1):S27-S32.

RESUMO

This scoping review aimed to identify, describe, and analyze the use of Atraumatic Restorative Treatment (ART) as public policy. Inclusion criteria: studies on public oral health policies; dental caries; ART. Exclusion criteria: clinical studies; specific interventions; studies that report public policies that do not use ART as a strategy for caries treatment. The search was conducted in PubMed, BVS, Epistemonikos, Health Systems Evidence, and Rxforchange. The selection process and data extraction were performed by two authors independently according to the stages and categories of a conceptual framework. Of the 2253 eligible articles, 139 were duplicates, and 1680 were not included after reading the title and abstract. After assessing the full text, 414 articles were excluded. Twenty articles were included. Nineteen were conducted in nine countries (South Africa, Bolivia, Cambodia, Egypt, Mexico, Tanzania, East Timor, Tunisia, and Zimbabwe), and one in the Americas. The studies reported high prevalence of dental caries and lack of access to restorative procedures in health services as common problems. Policy developments followed a similar process, with the presence of governments, conceptual use of scientific evidence, and induction by the World Health Organization. Regarding implementation barriers, the included studies mentioned the lack of supplies and lack of induction by managers,while in relation to the facilitators, permanent education and professional practice were mentioned. Cohort studies have shown a survival rate greater than 80% after one year of follow up of the restorations performed. The findings of this review indicate that the use of ART in public policies is promising, however, its use is still in an early stage. (AU)

Esta revisão de escopo teve como objetivo identificar, descrever e analisar o uso do Tratamento Restaurador Atraumático (ART) como política pública. Critérios de inclusão: estudos sobre políticas públicas de saúde bucal; cáries dentárias; ART. Critérios de exclusão: estudos clínicos; intervenções específicas; estudos que relatam políticas públicas que não utilizam o ART como estratégia para o tratamento de cárie. A pesquisa foi realizada no PubMed, BVS, Epistemonikos, Health Systems Evidence e Rxforchange. O processo de seleção e extração de dados foram realizados por dois autores, de forma independente, de acordo com as etapas e categorias de um quadro conceitual. Dos 2.253 artigos elegíveis, 139 eram duplicados e 1.680 não foram incluídos após a leitura do título e do resumo. Após avaliação do texto completo, foram excluídos 414 artigos. Vinte artigos foram incluídos. Dezenove foram realizados em nove países (África do Sul, Bolívia, Camboja, Egito, México, Tanzânia, Timor Leste, Tunísia e Zimbábue) e um nas Américas. Os estudos relataram alta prevalência de cárie dentária e falta de acesso a procedimentos restauradores nos serviços de saúde como problemas comuns. Os desenvolvimentos de políticas seguiram um processo semelhante, com a presença de governos, uso conceitual de evidências científicas e indução da Organização Mundial da Saúde. Quanto às barreiras de implementação, foram mencionadas a falta de insumos e a falta de indução por parte dos gestores. Quanto aos facilitadores, foram citados a educação permanente e a prática profissional. Estudos de coorte mostraram sobrevida superior a 80% após um ano de acompanhamento. Os achados desta revisão indicam que a utilização da ART nas políticas públicas é promissora, porém, sua utilização ainda é incipiente. (AU)

RESUMO

School coexistence processes are mediated by conflict situations that are often not adequately, immediately and comprehensively resolved by schools, giving rise to violence. School violence has become a matter of global priority not only at the school or family level, but also socially due to its magnitude and scope. In the Program for International Student Assessment (PISA), reported in 2018 that 23% of students in Mexico had suffered bullying at least once a month, these data are worrying as they reveal high rate of violence. Considering the increase of violence in Mexican educational institutions, we wonder if students' awareness in the use of communication to resolve disagreements would be achieved after participating in a conflict prevention project applying restorative practices. The objective of this study was to test whether students acquired greater emotional self-regulation, self-determination, and peaceful strategies to resolve conflicts after participating in a project centred on the restorative paradigm. A total of 336 students from an elementary school and a high school located in Mexico participated in this study. An ad hoc questionnaire was administered to the students by a restorative justice specialist in the middle of the school year. Statistical analyses were performed with the Statistical Package for the Social Sciences V. 25. The results obtained showed that, after the implementation of this program for five months, students in both schools showed greater emotional self-regulation and self-determination. In conclusion, providing students with restorative strategies to resolve disputes favoured the use of peaceful conflict resolution strategies.

RESUMO

OBJECTIVES: This study systematically revised the literature to answer the following question: do modeler liquids (MLs) affect the properties of direct resin-based composites (RBCs)? MATERIALS AND METHODS: The review followed the PRISMA statement, and the search was conducted in PubMed, Scopus, Web of Science, Embase, and Lilacs databases. Studies were included if they investigated the properties of RBCs prepared using the restorative dental modeling insertion technique (RDMIT). The risk of bias was performed with the RoBDEMAT tool. Statistical analyses were conducted using Review Manager, and heterogeneity was assessed with the Cochran Q test and I2 statistics. RESULTS: From 309 studies identified, 25 met the eligibility criteria, and 23 were meta-analyzed. In total, 27 MLs and 23 RBCs were evaluated. Modeled and non-modeled RBCs showed similar results in terms of cohesive strength, flexural strength, load-to-fracture, modulus of elasticity, work of fracture, degree of conversion, solubility, weight change, microhardness, and color change. Sorption and roughness benefited from the use of MLs, whereas translucency and whitening index were more adequate in the non-modeled RBCs. Aging affected similarly the modeled and non-modeled RBCs. Most studies showed a moderate risk of bias. CONCLUSIONS: Modeled and non-modeled RBCs performed similarly in most of the properties, and the use of non-solvated lubricants offered beneficial effects in some cases. CLINICAL RELEVANCE: When a balance has to be made between the RDMIT and the conventional technique, our review supports the safe application of modeler liquids for the handling of composite increments during the sculpting fabrication of direct resin-based restorations.

Assuntos