RESUMO

Sulfate radical-based advanced oxidation processes (SR-AOPs) are renowned for their exceptional capacity to degrade refractory organic pollutants due to their wide applicability, cost-effectiveness, and swift mineralization and oxidation rates. The primary sources of radicals in AOPs are persulfate (PS) and peroxymonosulfate (PMS) ions, sparking significant interest in their mechanistic and catalytic aspects. To develop a novel nanocatalyst for SR-AOPs, particularly for PMS activation, we synthesized carbon-coated FeCo nanoparticles (NPs) using solvothermal methods based on the polyol approach. Various synthesis conditions were investigated, and the NPs were thoroughly characterized regarding their structure, morphology, magnetic properties, and catalytic efficiency. The FeCo phase was primarily obtained at [OH-] / [Metal] = 26 and [Fe] / [Co] = 2 ratios. Moreover, as the [Fe]/[Co] ratio increased, the degree of xylose carbonization to form a carbon coating (hydrochar) on the NPs also increased. The NPs exhibited a spherical morphology with agglomerates of varying sizes. Vibrating-sample magnetometer analysis (VSM) indicated that a higher proportion of iron resulted in NPs with higher saturation magnetization (up to 167.8 emu g-1), attributed to a larger proportion of FeCo bcc phase in the nanocomposite. The best catalytic conditions for degrading 100 ppm Rhodamine B (RhB) included 0.05 g L-1 of NPs, 2 mM PMS, pH 7.0, and a 20-min reaction at 25 °C. Notably, singlet oxygen was the predominant specie formed in the experiments in the SR-AOP, followed by sulfate and hydroxyl radicals. The catalyst could be reused for up to five cycles, retaining over 98% RhB degradation, albeit with increased metal leaching. Even in the first use, dissolved Fe and Co concentrations were 0.8 ± 0.3 and 4.0 ± 0.5 mg L-1, respectively. The FeCo catalyst proved to be effective in dye degradation and offers the potential for further refinement to minimize Co2+ leaching.

Assuntos

RESUMO

Thermoplastic polyurethanes (TPUs) are remarkably versatile polymers due to the wide range of raw materials available for their synthesis, resulting in physicochemical characteristics that can be tailored according to the specific requirements of their final applications. In this study, a renewable bio-based polyol obtained from soybean oil is used for the synthesis of TPU via reactive extrusion, and the influence of the bio-based polyol on the multi-phase structure and properties of the TPU is studied. As raw materials, 4,4'-diphenylmethane (MDI), 1,4-butanediol, a fossil-based polyester polyol, and a bio-based polyol are used. The fossil-based to soybean-based polyol ratios studied are 100/0, 99/1, 95/5, 90/10, 80/20, and 50/50% by weight, respectively. The TPUs were characterized by size exclusion chromatography (SEC), gel content analysis, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), small-angle X-ray scattering (SAXS), dynamic mechanical analysis (DMA), and contact angle measurements. The results reveal that incorporating the renewable polyol enhances the compatibility between the rigid and flexible segments of the TPU. However, due to its high functionality, the addition of soybean-based polyol can promote cross-linking. This phenomenon reduces the density of hydrogen bonds within the material, also reducing polarity and restricting macromolecular mobility, as corroborated by higher glass transition temperature (Tg) values. Remarkably, the addition of small amounts of the bio-based polyol (up to 5 wt.% of the total polyol content) results in high-molecular-weight TPUs with lower polarity, combined with suitable processability and mechanical properties, thus broadening the range of applications and improving their sustainability.

RESUMO

This work describes the spray pyrolysis deposition of PbSe films, using as-prepared PbSe colloids as the starting solution. The PbSe colloids were prepared by using the alkahest approach, where Pb and Se precursors were made to react with the following green polyols: glycerin, ethylene glycol, and propylene glycol, to subsequently spray them onto glass substrates. The results of the characterization indicated that amine or thiol groups-free and single-phase rock-salt cubic PbSe powder was obtained, producing nanocrystals 16-30 nm in size. X-ray diffraction also showed that the PbSe films containing PbSeO3 and PbO·xH2O as impurity phases were produced during the deposition. The morphology of the powders and films was developed by a self-assembly process, in which the primary PbSe nanoparticles self-assemble to produce peanut-like microstructures. Additionally, a non-continuous and porous feature was formed in the thick films. Certain films revealed optical structures characterized by broad- and low-intensity bands resembling an exciton-like behavior. This could be attributed to the presence of nanocrystals with a size less than the Bohr radius, indicating reminiscent quantum effects. The results suggest that the usage of colloidal dispersions as spray solutions represents an effective approach to forming PbSe films, as well as that the synthesis method allows for the elimination of thiol and amine groups before deposition, significantly simplifying the process.

RESUMO

There is increasing evidence that either ingested or produced fructose may have a role in metabolic syndrome. While not commonly considered a criterion for metabolic syndrome, cardiac hypertrophy is often associated with metabolic syndrome, and its presence carries increased cardiovascular risk. Recently it has been shown that fructose and fructokinase C (KHK) can be induced in cardiac tissue. Here we tested whether diet-induced metabolic syndrome causes heart disease associated with increased fructose content and metabolism and whether it can be prevented with a fructokinase inhibitor (osthole). Male Wistar rats were provided a control diet (C) or high fat/sugar diet for 30 days (MS), with half of the latter group receiving osthol (MS+OT, 40 mg/kg/d). The Western diet increased fructose, uric acid, and triglyceride concentrations in cardiac tissue associated with cardiac hypertrophy, local hypoxia, oxidative stress, and increased activity and expression of KHK in cardiac tissue. Osthole reversed these effects. We conclude that the cardiac changes in metabolic syndrome involve increased fructose content and its metabolism and that blocking fructokinase can provide cardiac benefit through the inhibition of KHK with modulation of hypoxia, oxidative stress, hypertrophy, and fibrosis.

RESUMO

Multiwalled carbon nanotubes and Vulcan carbon were functionalized with a 30 %v/v hydrogen peroxide solution and employed as supports for Pt and PtSn catalysts prepared by the polyol method. PtSn catalysts with a Pt loading of 20 wt.% and a Pt : Sn atomic ratio equal to 3 : 1 were evaluated in the ethanol electrooxidation reaction. The effects of the oxidizing treatment on the surface area and the surface chemical nature were analyzed through N2 adsorption, isoelectric point, and temperature-programmed desorption measurements. Results showed that the H2 O2 treatment affects the surface area of the carbons to a great extent. Characterization results indicated that the performance of the electrocatalysts strongly depends both on the presence of Sn and on the support functionalization. PtSn/CNT-H2 O2 electrocatalyst displays a high electrochemical surface area and enhanced catalytic activity for ethanol oxidation in comparison to other catalysts in the present study.

RESUMO

To simultaneously form films while synthesizing solvent-free and catalyst-free bio-based polyurethanes, hexamethylene diisocyanate trimer was selected as an isocyanate group source to produce a low-viscosity reaction medium for dispersing high contents of microcrystalline cellulose (MCC, polyol) and cellulose nanocrystals (CNC). Castor oil was used as an additional polyol source. Up to 80 % of the MCC was dispersed, producing a film exhibiting the highest Tg (72 °C), tensile strength (18 MPa), and Young's modulus (522.4 MPa). 12.5 % (30 % MCC) and 7.5 % (50 % MCC) of CNC dispersed in the reaction medium formed films stiffer than their counterparts. All the films exhibited transparency and high crystallinity. The contact angle/zeta potential (ζ) indicated hydrophobic film surfaces. At pH 7.4, ζ suggested that the films interacted with physiological fluids favorably. The films were non-cytotoxic, and the composites exhibited cell growth compared with the control. The reported results, as far as it is known, are unprecedented.

Assuntos

RESUMO

Biobased hydroxyl-terminated polybutadiene (HTPB) was successfully synthesized in a one-pot reaction via metathesis degradation of industrial rubbers. Thus, polybutadiene (PB) and poly(styrene-butadiene-styrene) (SBS) were degraded via metathesis with high yields (>94%), using the fatty alcohol 10-undecen-1-ol as a chain transfer agent (CTA) and the second-generation Grubbs−Hoveyda catalyst. The identification of the hydroxyl groups (-OH) and the formation of biobased HTPB were verified by FT-IR and NMR. Likewise, the molecular weight and properties of the HTPB were controlled by changing the molar ratio of rubber to CTA ([C=C]/CTA) from 1:1 to 100:1, considering a constant molar ratio of the catalyst ([C=C]/Ru = 500:1). The number average molecular weight (Mn) ranged between 583 and 6580 g/mol and the decomposition temperatures between 134 and 220 °C. Moreover, the catalyst optimization study showed that at catalyst loadings as low as [C=C]/Ru = 5000:1, the theoretical molecular weight is in good agreement with the experimental molecular weight and the expected diols and polyols are formed. At higher ratios than those, the difference between theoretical and experimental molecular weight is wide, and there is no control over HTPB. Therefore, the rubber/CTA molar ratio and the amount of catalyst play an important role in PB degradation and HTPB synthesis. Biobased HTPB can be used to synthesize engineering design polymers, intermediates, fine chemicals, and in the polyurethane industry, and contribute to the development of environmentally friendly raw materials.

RESUMO

A new biomimetic sensor selective to folic acid based on a carbon paste modified with graphene oxide and Fe3O4 nanoparticles coated with molecularly imprinted polymer in the core@shell format (Fe3O4@MIPs) was obtained using the polyol method. The sensing phase was synthesized in a simple way and characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and Brunauer-Emmett-Teller (BET) surface area. In the binding experiments the selective material showed a high adsorption capacity (Q) of 30.4 mg g-1 for MMIP, while the Q value for MNIP (magnetic non-imprinted polymer) was 15.3 mg g-1 both of them following the Langmuir model to the adsorption procedure. After their efficiency was proven, these materials were used as modifiers in the electrochemical sensor (Fe3O4@MIP-GO/CPE). Under optimized conditions using the square-wave adsorptive voltammetry, the proposed sensor exhibited excellent response with a concentration linear range between 2.5 and 48 µmol L-1 and limit of detection of 0.65 µmol L-1 (S/σ = 3). The advantages obtained with the proposed method were high robustness, selectivity, and low cost being these characteristics due to the MIP; highly sensibility due to the high superficial area being the contribution of the magnetite in the core of material; and experimentally versatile since was possible carry out numerous reproductible analysis only make the renovation of the paste electrode surface by simple polishing. The sensor was applied successfully in pharmaceutical formulation and river water samples with recoveries percentages near 100%.

RESUMO

The aim of the present study was to elucidate how fructose is able to increase the rate of ethanol metabolism in the liver, an observation previously termed the fructose effect. Previous studies suggest that an increase in ATP consumption driven by glucose synthesis from fructose stimulates the oxidation of NADH in the mitochondrial respiratory chain, allowing faster oxidation of ethanol by alcohol dehydrogenase; however, this idea has been frequently challenged. We tested the effects of fructose, sorbose and tagatose both in vitro and in vivo. Both ethanol and each sugar were either added to isolated hepatocytes or injected intraperitoneally in the rat. In the in vitro experiments, samples were taken from the hepatocyte suspension in a time-dependent manner and deproteinized with perchloric acid. In the in vivo experiments, blood samples were taken every 15 min and the metabolites were determined in the plasma. These metabolites include ethanol, glucose, glycerol, sorbitol, lactate, fructose and sorbose. Ethanol oxidation by rat hepatocytes was increased by more than 50% with the addition of fructose. The stimulation was accompanied by increased glucose, glycerol, lactate and sorbitol production. A similar effect was observed with sorbose, while tagatose had no effect. The same pattern was observed in the in vivo experiments. This effect was abolished by inhibiting alcohol dehydrogenase with 4-methylpyrazole, whereas inhibition of the respiratory chain with cyanide did not affect the fructose effect. In conclusion, present results provide evidence that, by reducing glyceraldehyde and glycerol and fructose to sorbitol, respectively, NADH is consumed, allowing an increase in the elimination of ethanol. Hence, this effect is not linked to a stimulation of mitochondrial re-oxidation of NADH driven by ATP consumption.

Assuntos

RESUMO

Polyurethanes (PUs) from Polyethylene glycol (PEG) and polycaprolactone diol (PCL) and a crosslinker, Pentaerythritol (PE), were synthetized with isophorone diisocyanate (IPDI). In this study, we investigated the effect of polyol and crosslinker composition on phase separation and thermo-mechanical properties. The properties were studied through dynamic mechanical analysis, X-ray scattering, atomic force microscopy (AFM), and thermogravimetric analysis (TGA). The results showed changes in PUs properties, microphase structure, and separation due to the composition of polyol/crosslinker blend. So, the largest concentration of PE produced multimodal loss factor patterns, indicating segment segregation while PUs with a PEG/PCL = 1 displayed a monomodal loss factor pattern, indicating a homogeneously distributed microphase separation. Additionally, the increase of the PEG concentration enhanced the damping capacity. On the other hand, agglomeration and thread-like structures of hard segments (HS) were observed through AFM. Finally, the thermal behavior of PUs was affected by chemical composition. Lower concentration of PE reduced the crosslinking; hence, the temperature with the maximum degradation rate.

RESUMO

ABSTRACT Objective: This narrative review aimed to provide practitioners a synthesis of the current knowledge on the role of a low Fermentable Oligosaccharides Disaccharides Monosaccharides and Polyols diet in reducing symptoms associated with functional abdominal pain disorders in children. This review is focused on the pathophysiology, efficacy and criticism of low Fermentable Oligosaccharides Disaccharides Monosaccharides and Polyols diet in children. Sources: Cochrane Database, Pubmed and Embase were searched using specific terms for Fermentable Oligosaccharides Disaccharides Monosaccharides and Polyols diet interventions and functional abdominal pain disorders. Summary of the findings: In children, only one Randomized Control Trial and one open-label study reported positive results of low Fermentable Oligosaccharides Disaccharides Monosaccharides and Polyols diet; one Randomized Control Trial showed exacerbation of symptoms with fructans in children with Irritable Bowel Syndrome; no effect was found for the lactose-free diet whilst fructose-restricted diets were effective in 5/6 studies. Conclusions: In children there are few trials evaluating low Fermentable Oligosaccharides Disaccharides Monosaccharides and Polyols in functional abdominal pain disorders, with encouraging data on the therapeutic efficacy particularly of fructose-restricted diet. Additional efforts are still needed to fill this research gap and clarify the most efficient way for tailoring dietary restrictions based on the patient's tolerance and/or identification of potential biomarkers of low Fermentable Oligosaccharides Disaccharides Monosaccharides and Polyols efficacy, to maintain nutritional adequacy and to simplify the adherence to diet by labeling Fermentable Oligosaccharides Disaccharides Monosaccharides and Polyols content in commercial products.

RESUMO Objetivo: Nos últimos anos, foram feitos esforços consideráveis para esclarecer o papel da dieta com baixo teor de oligossacarídeos fermentáveis, dissacarídeos, monossacarídeos e polióis (FODMAPs) para o tratamento de distúrbios gastrintestinais funcionais (DGIFs). Esta revisão narrativa teve como objetivo fornecer aos profissionais uma síntese do conhecimento atual sobre o papel de uma dieta com baixo teor de FODMAPs (BFM) na redução dos sintomas associados a distúrbios funcionais de dor abdominal (DFDA) em crianças. Esta revisão está focada na fisiopatologia, eficácia e crítica da dieta BFM em crianças. Fontes: O banco de dados Cochrane, Pubmed e Embase foram pesquisados com o uso dos termos específicos para intervenções na dieta FODMAP e DFDA. Resumo dos achados: Em crianças, apenas um estudo controlado randomizado e um estudo aberto relataram resultados positivos da dieta BFM; um estudo controlado randomizado mostrou exacerbação dos sintomas com frutanos em crianças com síndrome do intestino irritável; nenhum efeito foi encontrado para a dieta livre de lactose, enquanto dietas com restrição de frutose foram eficazes em 5/6 estudos. Conclusões: Existem poucos estudos que avaliam BFM em DFDA em crianças, com dados encorajadores sobre a eficácia terapêutica, particularmente de dietas com restrição de frutose. Esforços adicionais ainda são necessários para preencher essa lacuna de pesquisa e esclarecer a maneira mais eficiente de adaptar as restrições dietéticas com base na tolerância do paciente e/ou identificação de biomarcadores potenciais de eficácia da BFM, para manter a adequação nutricional e simplificar a adesão à dieta, ao incluir informações sobre conteúdo de FODMAPs em rótulos de produtos comerciais.

Assuntos

RESUMO

Dental biofilm - in which a diverse set of microorganisms are embedded in a complex polysaccharide matrix that adheres to oral components - is one of the most complex microbial communities in the human body. As biofilm formation is related to oral infections, such as caries and periodontal diseases, strategies for biofilm control are crucial for maintaining oral health. Xylitol, a synthetic sugar used as a sucrose substitute, has been shown to reduce biofilm formation. However, its precise mechanism of action on biofilm reduction has so far not been elucidated. Previous studies demonstrate that bacterial ß-glucosidase action is crucial for biofilm formation. Here, we investigated the correlation between salivary ß-glucosidase activity and dental plaque occurrence. We found a positive correlation between enzymatic activity and the presence of dental biofilm. We observed that xylitol inhibits ß-glucosidase in human saliva. Kinetic studies also confirmed that xylitol acts as a mixed type inhibitor of salivary ß-glucosidase. Based on our data, we suggest that xylitol impairs oral biofilm formation by the inhibition of bacterial ß-glucosidase, which is essential for biofilm formation in the oral cavity.

Assuntos

RESUMO

Recently repeated heat stress and dehydration have been reported to cause oxidative stress and kidney damage that is enhanced by rehydrating with fructose solutions. We hypothesized that antioxidants might provide a novel way to prevent kidney damage. To test this hypothesis, mild heat stress was induced by exposing rats to 37 °C during 1 h in a closed chamber. The supplementation with water-soluble antioxidants (Antiox), ascorbic acid 1% plus N-acetyl cysteine 600 mg/L was done either in the 10% fructose 2 h rehydration fluid immediately after heat stress (Fructose 10% + Antiox), and/or in the tap water (Water + Antiox) for the remainder of the day, or in both fluids. After 4 weeks, control rats exposed to heat with fructose rehydration developed impaired renal function, tubular injury, intrarenal oxidative stress, a reduction in Nrf2-Keap1 antioxidant pathway, stimulation of vasopressin and the intrarenal polyol-fructokinase pathway. In contrast, dosing the antioxidants in the tap water (i.e., before the heat exposure and rehydration with fructose) preserved renal function, prevented renal tubule dysfunction and avoided the increase in systemic blood pressure. These effects were likely due to the amplification of the antioxidant defenses through increased Nrf2 nuclear translocation stimulated by the antioxidants and by the prevention of polyol fructokinase pathway overactivation. More studies to understand the mechanisms implicated in this pathology are warranted as there is recent evidence that they may be operating in humans as well.

Assuntos

RESUMO

OBJECTIVE: This narrative review aimed to provide practitioners a synthesis of the current knowledge on the role of a low Fermentable Oligosaccharides Disaccharides Monosaccharides and Polyols diet in reducing symptoms associated with functional abdominal pain disorders in children. This review is focused on the pathophysiology, efficacy and criticism of low Fermentable Oligosaccharides Disaccharides Monosaccharides and Polyols diet in children. SOURCES: Cochrane Database, Pubmed and Embase were searched using specific terms for Fermentable Oligosaccharides Disaccharides Monosaccharides and Polyols diet interventions and functional abdominal pain disorders. SUMMARY OF THE FINDINGS: In children, only one Randomized Control Trial and one open-label study reported positive results of low Fermentable Oligosaccharides Disaccharides Monosaccharides and Polyols diet; one Randomized Control Trial showed exacerbation of symptoms with fructans in children with Irritable Bowel Syndrome; no effect was found for the lactose-free diet whilst fructose-restricted diets were effective in 5/6 studies. CONCLUSIONS: In children there are few trials evaluating low Fermentable Oligosaccharides Disaccharides Monosaccharides and Polyols in functional abdominal pain disorders, with encouraging data on the therapeutic efficacy particularly of fructose-restricted diet. Additional efforts are still needed to fill this research gap and clarify the most efficient way for tailoring dietary restrictions based on the patient's tolerance and/or identification of potential biomarkers of low Fermentable Oligosaccharides Disaccharides Monosaccharides and Polyols efficacy, to maintain nutritional adequacy and to simplify the adherence to diet by labeling Fermentable Oligosaccharides Disaccharides Monosaccharides and Polyols content in commercial products.

Assuntos

RESUMO

BACKGROUND: Recent studies have shown that commercial enteral formulas with low FODMAP (FO, fermentable oligosaccharides; D, disaccharides; M, monosaccharides; AP, and polyols) content decrease diarrhea of individuals receiving enteral nutrition therapy (ENT). There is no information, however, regarding the content of FODMAP in homemade enteral formula. The objective of this study was to assess energy and macronutrient content, and to quantify the amount of FODMAP content in homemade enteral formula, commonly prescribed for home use after hospital discharge. METHODS: Recipes of homemade enteral formula were requested from all hospitals and healthcare centers in a Brazilian city, totaling 24 recipes. The diets were quantified in relation to their energy content, macronutrients, and FODMAP content. RESULTS: Of the 19 hospitals, 68.4% prescribe only commercial enteral formulas at the time of hospital discharge, and 31.6% prescribe homemade enteral formula, both conventional and commercial. The homemade enteral formula showed a variation from 700 to 3000 kcal/d. The macronutrient levels of carbohydrates, proteins, and fats were 49.0% ± 6.8%, 17.4% ± 3.1%, and 33.5% ± 6.2%, respectively. On average, homemade enteral formula had 58.5% of high FODMAP content, 7.1% of moderate content, and 34.5% of low FODMAP content, considering that milk is the main food responsible for the high content of FODMAP. CONCLUSIONS: Homemade enteral formula presented adequate nutrition characteristics and is rich in FODMAP. It is important to consider FODMAP in enteral diets prescribed for individuals intolerant to these carbohydrates by individualizing the diet prescription.

Assuntos

RESUMO

In this study, we investigated the potential of two non-edible oil extracts from seeds of Colliguaja integerrima (CIO) and Colliguaja salicifolia (CSO) to use as a renewable source for polyols and, eventually, polyurethane foams or biodiesel. For this purpose, two novel polyols from the aforementioned oils were obtained in a one-single step reaction using a mixture of hydrogen peroxide and acetic acid. The polyol derivatives obtained from the two studied oils were characterized by spectral (FTIR, ¹H NMR, and 13C NMR), physicochemical (e.g., chromatographic analysis, acid value, oxidizability values, iodine value, peroxide value, saponification number, kinematic viscosity, density, theorical molecular weight, hydroxyl number, and hydroxyl functionality) and thermal (TGA) analyses according to standard methods. Physicochemical results revealed that all parameters, with the exception of the iodine value, were higher for bio-polyols (CSP and CIP) compared to the starting oils. The NMR, TGA, and FTIR analyses demonstrated the formation of polyols. Finally, the OH functionality values for CIP and CSP were 4.50 and 5.00, respectively. This result indicated the possible used of CIP and CSP as a raw material for the preparation of polyurethane rigid foams.

RESUMO

Polyurethanes are materials with a strong structure-property relationship. The goal of this research was to study the effect of a polyol blend composition of polyurethanes on its properties using a mixture design and setting mathematic models for each property. Water absorption, hydrolytic degradation, contact angle, tensile strength hardness and modulus were studied. Additionally, thermal stability was studied by thermogravimetric analysis. Area under the curve was used to evaluate the effect of polyol blend composition on thermal stability and kinetics of water absorption and hydrolytic degradation. Least squares were used to calculate the regression coefficients. Models for the properties were significant, and lack of fit was not (p < 0.05). Fit statistics suggest both good fitting and prediction. Water absorption, hydrolytic degradation and contact angle were mediated by the hydrophilic nature of the polyols. Tensile strength, modulus and hardness could be regulated by the PE content and the characteristics of polyols. Regression of DTG curves from thermal analysis showed improvement of thermal stability with the increase of PCL and PE. An ANOVA test of the model terms demonstrated that three component influences on bulk properties like water absorption, hydrolytic degradation, hardness, tensile strength and modulus. The PEG*PCL interaction influences on the contact angle, which is a surface property. Mixture design application allowed for an understanding of the structure-property relationship through mathematic models.

Assuntos

RESUMO

In this work we demonstrate that aldose reductase (AR) interacts directly with tubulin and, was subjected to microtubule formation conditions, enzymatic AR activity increased more than sixfold. Since AR interacts mainly with tubulin that has 3-nitro-tyrosine in its carboxy-terminal, we evaluated whether tyrosine and other phenolic acid derivatives could prevent the interaction tubulin/AR and the enzymatic activation. The drugs evaluated have two characteristics in common: the presence of an aromatic ring and a carboxylic substituent. The 9 drugs tested were able to prevent both the interaction tubulin/AR and the enzymatic activation. In addition, we found that the induction of microtubule formation by high concentrations of glucose and the consequent activation of AR in cultured cells can be inhibited by phenolic acid derivates that prevent the interaction tubulin/AR. These results suggest that tubulin regulates the activation of AR through a direct interaction which can be controlled with phenolic derivates of carboxylic acids.

Assuntos

RESUMO

This paper reports on the development of an amperometric method for the determination of myo-inositol. The method involves coating of a glassy carbon electrode (GCE) with a molecularly imprinted polymer (MIP) and reduced graphene oxide (RGO) that was modified with nickel nanoparticles (NiNPs). The MIP was prepared by electropolymerization of pyrrole on the surface of the GCE in the presence of myo-inositol molecules. The construction steps of the modified electrode were monitored via cyclic voltammetry, atomic force microscopy, scanning electron microscopy and X-ray Photoelectron Spectroscopy. The results were evaluated using differential pulse voltammetry, in which hexacyanoferrate was used as an electrochemically active probe. Under optimized experimental conditions, the imprint-modified GCE has a linear response in the 1.0 × 10-10 mol L-1 to 1.0 × 10-8 mol L-1 concentration range, with a 7.6 × 10-11 mol L-1 detection limit and an electrochemical sensitivity of 4.5 µA·cm-2 µmol-1. The method showed improved selectivity even in the presence of molecules with similar chemical structure. The GCE modified was successfully applied to the determination of myo-inositol in sugarcane vinasse where it yielded recoveries that ranged from 95 to 102%. Graphical abstract Schematic presentation of molecularly imprinted polymer (MIP) on a glassy carbon electrode (GCE) modified with nickel nanoparticles (NiNP) anchored in reduced graphene oxide (RGO). The resulting MIP/NiNP/RGO-GCE was used for indirect determination of myo-inositol.

RESUMO

Biocompatible polymeric coatings for metallic stents are desired, as currently used materials present limitations such as deformation during degradation and exponential loss of mechanical properties after implantation. These concerns, together with the present risks of the drug-eluting stents, namely, thrombosis and restenosis, require new materials to be studied. For this purpose, novel poly(polyol sebacate)-derived polymers are investigated as coatings for metallic stents. All pre-polymers reveal a low molecular weight between 3000 and 18 000 g mol-1 . The cured polymers range from flexible to more rigid, with E-modulus between 0.6 and 3.8 MPa. Their advantages include straightforward synthesis, biodegradability, easy processing through different scaffolding techniques, and easy transfer to industrial production. Furthermore, electrospraying and dip-coating procedures are used as proof-of-concept to create coatings on metallic stents. Biocompatibility tests using adipose stem cells lead to promising results for the use of these materials as coatings for metallic coronary stents.

Assuntos