RESUMO

Introducción: Los brotes recurrentes de dengue subrayan la necesidad de abordajes más efectivos en la prevención y control de vectores. A menudo, las intervenciones se centran en un enfoque biomédico y de promoción de la salud desde un enfoque individual, sin integrar factores socioambientales ni ser evaluados científicamente Objetivo: Evaluar el impacto de la recolección de residuos domésticos de gran tamaño sobre potenciales criaderos de mosquitos transmisores del dengue en Asunción, Paraguay durante los años 2017 a 2021. Material y métodos: Estudio cuasiexperimental, longitudinal, donde se encuestaron 350 hogares, como línea de base durante el 2017 y una línea de cierre en 108 hogares en 2021. Se utilizó el método de Diferencia en Diferencia (DID) para comparar la presencia de criaderos antes y después de la intervención en 43 hogares intervenidos y 65 no intervenidos. Resultados: La recolección diferenciada fue utilizada principalmente por aquellos hogares que tenían una gran cantidad de residuos sólidos de gran tamaño, pero no para deshacerse de todos estos objetos, sino sólo de una parte (DID de -52% en el número total de criaderos y DID de 1% en número de hogares con criaderos). Encontramos una reducción significativa en el número de total de criaderos de gran tamaño, pero no observamos diferencias en el número total de hogares con criaderos. Factores subjetivos, como la creencia de que los objetos en desuso podrían llegar a ser útiles en el futuro explicaban en gran medida su presencia en los hogares, incluso con el servicio disponible. Conclusiones: El enfoque de la gestión municipal en los residuos voluminosos puede contribuir a la prevención del dengue por el hecho de que no constituyen residuos de generación rápida en los hogares, y su eliminación puede tener un impacto relativamente duradero. El factor subjetivo relacionado con la presencia de estos criaderos en los hogares debe ser objeto de mayores estudios.

Introduction: Recurrent dengue outbreaks underscore the need for more effective approaches to vector prevention and control. Often, interventions focus on a biomedical and health promotion approach from an individual approach, without integrating socio-environmental factors or being scientifically evaluated. Objetive: To evaluate the impact of large household waste collection on potential breeding sites of dengue-transmitting mosquitoes in Asuncion, Paraguay during the years 2017 to 2021. Material and methods: Quasi-experimental, longitudinal study, where 350 households were surveyed, as a baseline during 2017 and a closing line in 108 households in 2021. The Difference-in-Difference (DID) method was used to compare the presence of breeding sites before and after the intervention in 43 intervened and 65 non-intervened households. Results: Differentiated collection was mainly used by those households that had a large amount of large solid waste, but not to dispose of all these objects, but only part of them (DID of -52% in the total number of breeding sites and DID of 1% in the number of households with breeding sites). We found a significant reduction in the total number of large breeding sites but did not observe differences in the total number of households with breeding sites. Subjective factors, such as the belief that disused objects could become useful in the future, were largely responsible for the reduction in the number of large breeding sites. Conclusions: The municipal management approach to bulky waste can contribute to dengue prevention because it does not constitute rapidly generated waste in households, and its disposal can have a relatively long-lasting impact. The subjective factors related to the presence of these breeding sites in households warrant further study.

RESUMO

Waste disposal systems are crucial components of environmental management, and focusing on this sector can contribute to the development of various other sectors and improve social welfare. Urban waste is no longer solely an environmental issue; it now plays a significant role in the economy, energy, and value creation, with waste disposal centers (WDCs) being a key manifestation. The purpose of this study is to measure the performance of WDCs in the state of Nuevo León, Mexico, with the aim of developing environmental, social, and governance (ESG) strategies to strengthen and prepare the WDCs for the industrial developments in this state. By identifying environmental variables and undesirable factors, the efficiency and managerial capacity of 32 WDCs were assessed. The analysis revealed that 9 out of the 32 WDCs are technically efficient, while the remaining 23 require significant improvements. Using the Data Envelopment Analysis (DEA) technique, an average efficiency score of 0.91 was found, with a standard deviation of 0.08. The managerial capacity analysis indicated that the highest-ranked WDC achieved an efficiency score of 1, whereas the lowest-ranked WDC scored 0.67. Finally, an operational map of development strategies was developed using the Interpretive Structural Modeling (ISM) and Matrix Impact Cross-Reference Multiplication Applied to a Classification (MICMAC) approach. The results indicate that four phases of development should be followed for real development and maturity of development in these WDCs, including Groundwork, Structuring, Development and Growth, and Smart Maturity.

Assuntos

RESUMO

An efficient municipal solid waste (MSW) system is critical to modern cities in order to enhance sustainability and liveability of urban life. With this aim, the planning phase of the MSW system should be carefully addressed by decision makers. However, planning success is dependent on many sources of uncertainty that can affect key parameters of the system, for example, the waste generation rate in an urban area. With this in mind, this article contributes with a robust optimization model to design the network of collection points (i.e. location and storage capacity), which are the first points of contact with the MSW system. A central feature of the model is a bi-objective function that aims at simultaneously minimizing the network costs of collection points and the required collection frequency to gather the accumulated waste (as a proxy of the collection cost). The value of the model is demonstrated by comparing its solutions with those obtained from its deterministic counterpart over a set of realistic instances considering different scenarios defined by different waste generation rates. The results show that the robust model finds competitive solutions in almost all cases investigated. An additional benefit of the model is that it allows the user to explore trade-offs between the two objectives.

RESUMO

The recycling of fly ash from municipal solid waste incineration is currently a global issue. This work intends to examine the viability of a novel recycling alternative for fly ashes as a component of fire-resistant plates. To lessen the quantity of heavy metal leaching, the fly ash was utilized after being washed using a water/fly ash ratio of 2 for one hour. Subsequently, an inexpensive, straightforward molding and curing process was used to create a plate, with a composition of 60%wt of MSWI-FA, 30%wt of gypsum, 0.5%wt of glass fiber and 9.5%wt of vermiculite. The plate exhibited high fire resistance. Furthermore, it demonstrated compression, flexural strength and surface hardness slightly lower than the requirements of European Standards. This allows for manufacturing plates with a high washed MSWI-FA content as fire protection in firewalls and doors for homes and commercial buildings. A Life Cycle Assessment was carried out. The case study shows that a 60% substitution of gypsum resulted in an environmental impact reduction of 8-48% for all impact categories examined, except four categories impacts (marine eutrophication, human toxicity (cancer), human non-carcinogenic toxicity and water depletion, where it increased between 2 and 718 times), due to the previous washing of MSWI-FA. When these fly ashes are used as a raw material in fire-resistant materials, they may be recycled and offer environmental advantages over more conventional materials like gypsum.

RESUMO

Fundamento: Las estrategias innovadoras incluyen a la gestión por procesos para evitar que trabajadores resulten propensos a tener dificultades en su desempeño a causa del impacto psicológico. Resulta necesario que la administración adopte procesos de aprendizaje para el desarrollo de habilidades sociales que permitan el cuidado de la salud mental de los trabajadores y contrarrestar el efecto negativo del impacto psicológico. Objetivo: Determinar la influencia en el impacto psicológico de las estrategias innovadoras con habilidades sociales para cuidar la salud mental desarrolladas mediante el aprendizaje por indagación en la gestión por procesos. Métodos: Se realizó un estudio transversal, no experimental, con alcance descriptivo y correlacional y un enfoque cuantitativo. La muestra fue de 64 trabajadores de la subgerencia de educación, salud y deportes de una municipalidad. Para la recopilación de la información de las variables definidas se utilizaron cuestionarios empleados en investigaciones efectuadas en Perú. La hipótesis nula fue: no influye en el impacto psicológico las estrategias innovadoras que incluyen la gestión por procesos de habilidades sociales adquiridas mediante aprendizaje por indagación para cuidar la salud mental de los trabajadores de una municipalidad del Perú. Resultados: Existió una relación entre el impacto psicológico y las estrategias innovadoras que incluyen la gestión por procesos, determinada por las habilidades sociales adquiridas mediante el aprendizaje por indagación para cuidar la salud mental; con una relación de 0,86 y un nivel de significación de 0,000. Conclusiones: Existe alta influencia en el impacto psicológico de las estrategias innovadoras que incluyen a la gestión por procesos de las habilidades sociales desarrolladas mediante el aprendizaje por indagación para cuidar la salud mental de los trabajadores.

Foundation: Innovative strategies include process management to prevent workers from being prone to difficulties in their performance due to the psychological impact. It is necessary for the administration to adopt learning processes for the development of social skills that allow the care of the mental health of workers and counteract the negative effect of the psychological impact. Objective: To determine the influence on the psychological impact of innovative strategies with social skills to care for mental health developed through inquiry learning in process management. Methods: The research had a cross-sectional, non-experimental design, with a descriptive and correlational scope and a quantitative approach. The sample was 64 workers from the deputy management of education, health and sports of a municipality. To collect information on the defined variables, questionnaires used in research carried out in Peru were used. The null hypothesis was: in the psychological impact does not influence the innovative strategies on process management of social skills acquired through inquiry learning to care for the mental health of workers in a municipality in Peru. Results: There was a relationship between the psychological impact and the innovative strategies on process management determined by the social skills acquired through inquiry learning to care for mental health; with a ratio of 0.86 and a significance level of 0.000. Conclusions: There is a high influence on the psychological impact of innovative strategies that include process management of social skills developed through inquiry learning to care for the mental health of workers.

RESUMO

COVID-19 pandemic has changed several aspects in human behaviour, whereas population mobility patterns have been strongly affected by social distancing. In parallel, changes in solid waste generation patterns have been reported worldwide. This work assessed the influence of the COVID-19 pandemic on waste generation and collection in São Paulo city, Brazil, the largest city of Latin America. Data on nine types of wastes collected between 2013 and 2021 were obtained, and the quantities of wastes collected before and during the pandemic were compared. These data were also discussed in light of data on COVID-19 cases and rates of social distancing and mobility. An increase in the amount of recyclables collected during the first wave of COVID-19 (March to September 2020) was observed. Decreases in the quantities of construction, demolition and bulky wastes (first wave of COVID-19) and farmers market wastes (second wave - October 2020 to February 2021) were also evidenced. The quantities of medical wastes collected during the pandemic significantly increased. The amount of residential wastes was lower than the mean for the pre-pandemic period during the first months of COVID-19. Thus, changes in lifestyle and consumption patterns of the population of São Paulo city seem to have affected solid waste generation during the pandemic, which reinforces the need of implementing solid waste management policies based on a diagnostic that characterise and consider these changes.

Assuntos

RESUMO

Analysing municipal solid waste (MSW) management scenarios is relevant for planning future policies and actions toward a circular economy. Life cycle assessment (LCA) is appropriate for evaluating technologies of MSW treatment and their environmental impacts. However, in developing countries, advanced assessments are difficult to introduce due to the lack of technical knowledge, data and financial support. This research aims to assess the main potentialities of the introduction of waste-to-energy (WtE) systems in a developing Argentinean urban area considering the existing regulations about MSW recycling goals. The study was conducted with WRATE software and the proposed scenarios were current management, grate incineration of raw MSW and incineration of solid recovered fuel (SRF). In addition, a sensitivity analysis on the energy matrix was included. It was found that the production of SRF allows increasing the energy generation from waste by 200% and reducing the environmental impact of about 10% regarding the current MSW management system. Acidification Potential and Abiotic Depletion Potential were sensitive to changes in electricity mix. Results showed that if MSW reduction goals are achieved, changes in MSW composition will affect the performance of WtE plants and, in some cases, they will be not technically feasible. The outcomes of this study can be of interest for developing countries stakeholders and practitioners interested in LCA and sustainable MSW management.

Assuntos

RESUMO

Composites of polyurethane and graphite and polyurethane and carbon nanofibers (PU/Graphite 0.5% and PU/CNF 1%) were synthesized and used as anodes in dual-compartment microbial fuel cells (MFCs) for municipal wastewater treatment; electrical energy generation and organic matter removal were assessed. The maximum power density, coulombic efficiency and chemical oxygen demand (COD) removal efficiency in the MFCs packed with the PU/Graphite 0.5% and PU/CNF 1% composites were 232.32 mW/m3 and 90.78 mW/m3, 5.87 and 4.41%, and 51.38 and 68.62%, respectively. In addition, the internal resistance of the MFCs with the best bioelectrochemical performance (PU/Graphite 0.5%) was 1051.11 Ω. The results obtained in this study demonstrate the feasibility of using these types of materials in dual-compartment MFCs for wastewater treatment with electric power generation.

RESUMO

Anaerobic digestion (AD) as a waste management strategy for the organic fraction of municipal waste (OFMSW) has received attention in developed countries for several decades, leading to the development of large-scale plants. In contrast, AD of OFMSW has only recently drawn attention in developing countries. This systematic review was carried out to investigate the implementation of AD to treat the OFMSW in developing countries, focusing on assessing pilot and full-scale AD plants reported in the last ten years. Studies that met the selection criteria were analyzed and data regarding operating parameters, feedstock characteristics, and biogas, digestate, and energy production were extracted. As outlined in this systematic review, AD plants located in developing countries are mostly one-stage mesophilic systems that treat OFMSW via mono-digestion, almost exclusively with the aim of producing electrical energy. Based on the analysis done throughout this systematic review, it was noted that there is a large difference in the maturity level of AD systems between developing and developed countries, mainly due to the economic capacity of developed countries to invest in sustainable waste management systems. However, the number of AD plants reported in scientific papers is significantly lower than the number of installed AD systems. Research articles regarding large-scale implementation of AD to treat OFMSW in developed countries were analyzed and compared with developing countries. This comparison identified practices used in plants in developed countries that could be utilized in the large-scale implementation and success of AD in developing countries. These practices include exploiting potential products with high market-values, forming partnerships with local industries to use industrial wastes as co-substrates, and exploring different biological and physical pretreatment technologies. Additionally, the analysis of capital and operational costs of AD plants showed that costs tend to be higher for developing countries due to their need to import of materials and equipment from developed countries. Technical, economical, and political challenges for the implementation of AD at a large-scale in developing countries are highlighted.

Assuntos

RESUMO

Identifying sources is crucial for proposing effective actions to combat marine litter pollution. Here, we used an innovative approach to identify hotspots of mismanaged plastic waste (MPW) within Brazil and subsequent leakage to the ocean, based on population density, socio-economic conditions, municipal solid waste management and environmental parameters. We estimated plastic waste generation and MPW for each of the 5570 Brazilian municipalities, which totaled 3.44 million metric tons per year. Then, we estimated the probability of litter mobilization and transport (P) and the relative risk of leakage to the ocean (MPW × P). The Guanabara Bay and La Plata River comprised the main oceanic entry hotspots of litter produced in Brazil. The use of national databases allowed us to increase spatial and temporal granularity, offering a detailed baseline for the application of prevention and mitigation actions. However, overcoming data limitations is still a challenge in Brazil as in other Global South countries.

Assuntos

RESUMO

The incorrect disposal of waste negatively influences the population's quality of life and harms the environment. In Brazil, waste disposal in the open air is still a reality, which generates concerns about the contamination of the areas surrounding these dumpsites. The present work evaluated the possible environmental risks of a deactivated dumpsite in southern Brazil. The soil was characterized by physical and chemical tests, emphasizing the analysis of heavy metals Al, Fe, Cu, Mn, and Zn. Using geostatistical tools, it was possible to determine the distribution of these heavy metals in the influence of the landfill, since the metals Mn, Fe, and Zn showed a significant difference about the reference soil, indicating that they came from leaching from the landfill. The dispersion of the metals along the slope showed a tendency towards mobility since the highest concentrations were at elevations below the landfill. The area was considered contaminated due to the high scores of the evaluated indexes pollution, as the Improved Nemerow Pollution Index, which considers pollutant concentration, toxicity, and environmental impact to provide a measure of contamination, and was equivalent to 6.44, indicating that the area is contaminated. However, it presented low ecological risks, with a potential ecological risk of 18.55. As well as low risks to human health, with hazard index below the limit considered critical to health (HI < 1). Thus, the results of this study showed that the metals are released around the deactivated deposit, which compromises the environmental safety of the site, mainly due to its proximity to bodies of water that supply the region. Thus, the permanent control and monitoring of the areas of deactivated dumpsites are essential to avoid further pollution and should be included in the management plans for deactivating these deposits throughout the country.

Assuntos

RESUMO

This study tracked five pharmaceutically active compounds (PhACs) in Mexico City's sewage, namely, famotidine, indomethacin, dexamethasone, azithromycin, and ivermectin, which were used to treat COVID-19. The monitoring campaign was carried out over 30 months (May 2020 to November 2022), covering the five COVID-19 waves in Mexico. In the Central Emitter, the main sewage outflow, famotidine displayed levels of 132.57 ± 28.16 ng L-1 (range from < LOQ to 189.1 ng L-1), followed by indomethacin (average 672.46 ± 116.4 ng L-1, range from 516.7 to 945.2 ng L-1), dexamethasone (average 610.4 ± 225.7 ng L-1, range from 233.4 to 1044.5 ng L-1), azithromycin (average 4436.2 ± 903.6 ng L-1, range from 2873.7 to 5819.6 ng L-1), and ivermectin (average 3413.3 ± 1244.6 ng L-1, range from 1219.8 to 4622.4 ng L-1). The concentrations of dexamethasone, azithromycin and ivermectin were higher in sewage from a temporary COVID-19 care unit, by a factor of 3.48, 3.52 and 2.55, respectively, compared with those found in municipal wastewater. In the effluent of the Atotonilco Wastewater Treatment Plant (AWWTP), which treats near 60 % of the Mexico City's sewage, famotidine was absent, while concentrations of indomethacin, dexamethasone, azithromycin and ivermectin were 78.2 %, 76.7 %, 74.4 %, and 88.1 % lower than those in the influent, respectively. The occurrence of PhACs in treated and untreated wastewater resulted in medium to high environmental risk since Mexico City's wastewater is reused for irrigation in the Mezquital Valley. There, PhACs were found in irrigation canals at lower levels than those observed in Mexico City throughout the monitoring. On the other hand, famotidine, indomethacin, and dexamethasone were not found in surface water resulting from the infiltration of wastewater through soil in Mezquital Valley, while azithromycin and ivermectin sporadically appeared in surface water samples collected through 2021. Using an optimized risk assessment based on a semi-probabilistic approach, the PhACs were prioritized as ivermectin > azithromycin > dexamethasone > famotidine > indomethacin.

Assuntos

RESUMO

The amount and characterization of municipal and industrial waste generated in numerous cities worldwide have changed dramatically in recent years due to the COVID-19 pandemic. Consequently, assessing the impact of COVID-19-related policies is important to provide decision-makers with adequate knowledge to respond effectively to future events and create successful policies that respond to specific contexts. This study focuses on Chile, Latin America's second-largest municipal and industrial solid waste producer, with tight quarantine procedures placed to prevent the virus from spreading, and a series of monetary incentives implemented to minimize the economic and social impact of the quarantines. The time series of municipal solid waste (MSW) and recycling in the metropolitan region show a decrease in the amount collected during the initial months of lockdown and a subsequent increase during monetary incentive implementation. The country recovered and exceeded pre-pandemic MSW generation and recycling levels. Furthermore, the lockdown and the withdrawal of retirement funds (WRF) had a varied impact on each municipality in the region. However, WRF had a larger direct impact than a lockdown, indicating that purchasing power has a greater impact than mobility in waste generation and recycling, at least in this region of Chile.

Assuntos

RESUMO

The 2020 coronavirus pandemic has involved a series of political and social measures that have been adapted to the spread of the disease. Apart from the severe effects on health sector, the most effects of the pandemic have been felt in households and day-to-day life. Consequently, COVID-19 has had a significant impact on the generation of not only medical and health care waste but also of municipal solid waste production and composition. In this context, this work studied the implications of COVID-19 for municipal solid waste generation in Granada, Spain. Granada is a city where the economy is based mainly on the services sector, tourism and the University. Therefore, the impact of COVID-19 pandemic has greatly affected the city and it can be analyzed through the municipal solid waste generation. For the study of the incidence of COVID-19 in the generation of waste a period that goes from March 2019 to February 2021 has been chosen. The results show that, in the global calculation, a decrease in the generation of waste in the city is observed in this last year, reaching - 13.8%. Regarding the organic-rest fraction, the decrease in the COVID year represents - 11.7%. However, bulky waste has shown an increase in the COVID year which may be related to higher home furnishings renovation rates than in other years. Finally, glass is the waste flow that best indicates the effect of COVID in the service sector. In leisure areas, a significant reduction in the collection of glass is observed (- 45%). Supplementary Information: The online version contains supplementary material available at 10.1007/s10163-023-01671-2.

RESUMO

Treating domestic wastewater has become more and more complicated due to the high content of different types of detergents. In this context, advanced electro-oxidation (AEO) has become a powerful tool for complex wastewater remediation. The electrochemical degradation of surfactants present in domestic wastewater was carried out using a DiaClean® cell in a recirculation system equipped with boron-doped diamond (BDD) as the anode and stainless steel as the cathode. The effect of recirculation flow (1.5, 4.0 and 7.0 L min-1) and the applied current density (j = 7, 14, 20, 30, 40, and 50 mA cm-2) was studied. The degradation was followed by the concentration of surfactants, chemical oxygen demand (COD), and turbidity. pH value, conductivity, temperature, sulfates, nitrates, phosphates, and chlorides were also evaluated. Toxicity assays were studied through evaluating Chlorella sp. performance at 0, 3, and 7 h of treatment. Finally, the mineralization was followed by total organic carbon (TOC) under optimal operating conditions. The results showed that applying j = 14 mA cm-2 and a flow rate of 1.5 L min-1 during 7 h of electrolysis were the best conditions for the efficient mineralization of wastewater, achieving the removal of 64.7% of surfactants, 48.7% of COD, 24.9% of turbidity, and 44.9% of mineralization analyzed by the removal of TOC. The toxicity assays showed that Chlorella microalgae were unable to grow in AEO-treated wastewater (cellular density: 0 × 104 cells ml-1 after 3- and 7-h treatments). Finally, the energy consumption was analyzed, and the operating cost of 1.40 USD m-3 was calculated. Therefore, this technology allows for the degradation of complex and stable molecules such as surfactants in real and complex wastewater, if toxicity is not taken into account.

RESUMO

This research aimed at evaluating the effects of capping on the mitigation of impacts generated by a closed unlined landfill in São Carlos, SP, Brazil. Physicochemical and microbiological analyses (16S rRNA sequencing) of buried solid waste samples were performed, in capped and uncapped areas. Even though leachate pockets could still be encountered in capped areas, the capping construction reduced oxygen availability and created more reducing conditions, propitiating the development of sulfate-reducing bacteria and possibly contributing to the precipitation of the metals Pb, Cd, Ni, Co, As, and Zn as metal sulfides, causing their immobilization. The microbial populations adapted to the anaerobic conditions created under capped zones belonged to the phyla Firmicutes, Chloroflexi, and Euryarchaeota and the genera Methanosaeta, Hydrogenispora, Smithella, and Gelria. Differently, the phyla Acidobacteria, Proteobacteria, Bacteroidetes, and Actinobacteria were more abundant in samples from the uncapped zones, in which the abundance of different genera varied homogeneously. Methanogenic activity was not impaired by the intervention measure, as assessed by the specific methanogenic activity (SMA). Capping of old unlined landfills brings benefits to the immobilization of metals and does not impair microbial degradation, being effective for the mitigation of impacts on soils and water resources.

Assuntos

RESUMO

Municipal solid waste leachate-based epidemiology is an alternative viral tracking tool that applies fresh truck leachate as an early warning of public health emergencies. This study aimed to investigate the potential of SARS-CoV-2 surveillance based on solid waste fresh truck leachate. Twenty truck leachate samples were ultracentrifugated, nucleic acid extracted, and real-time RT-qPCR SARS-CoV-2 N1/N2 applied. Viral isolation, variant of concern (N1/N2) inference, and whole genome sequencing were also performed. SARS-CoV-2 was detected on 40% (8/20) of samples, with a concentration from 2.89 to 6.96 RNA Log10 100 mL-1. The attempt to isolate SARS-CoV-2 and recover the whole genome was not successful; however, positive samples were characterized as possible pre-variant of concern (pre-VOC), VOC Alpha (B.1.1.7) and variant of interest Zeta (P.2). This approach revealed an alternative tool to infer SARS-CoV-2 in the environment and may help the management of local surveillance, health, and social policies.

Assuntos

RESUMO

The development of methodologies to support decision-making in municipal solid waste (MSW) management processes is of great interest for municipal administrations. Artificial intelligence (AI) techniques provide multiple tools for designing algorithms to objectively analyze data while creating highly precise models. Support vector machines and neuronal networks are formed by AI applications offering optimization solutions at different managing stages. In this paper, an implementation and comparison of the results obtained by two AI methods on a solid waste management problem is shown. Support vector machine (SVM) and long short-term memory (LSTM) network techniques have been used. The implementation of LSTM took into account different configurations, temporal filtering and annual calculations of solid waste collection periods. Results show that the SVM method properly fits selected data and yields consistent regression curves, even with very limited training data, leading to more accurate results than those obtained by the LSTM method.

Assuntos

RESUMO

Municipal solid waste (MSW) is a complex challenge to be solved worldwide, intensified in developing countries since in addition to economic and environmental aspects there is also the social aspect represented by the collector individual. From an integrative bibliographic review this study longitudinally analyses the socio-productive inclusion of collectors in the municipal solid waste management (MSWM) at an international level. Aiming: (a) to identify relevant articles describing/studies on MSWM with social inclusion of scavengers around the world; (b) to analyse these articles in order to present its main characteristics; (c) to describe municipal solid waste management with recyclable potential (MSWRP) with socio-productive inclusion of collectors; (d) the study provides a more detailed summary of MSWRP management in some developing countries: Brazil, China, India, Indonesia, Mexico, Nigeria and Pakistan; and (e) to provide a framework indicating the future practices and perspectives of MSWRP. As result, this study presents the paradigms and future questions for an effective improvement of WSWM, such as: Professional Training of Scavengers, Cultural Issues, Empowerment of Scavenger, Recycling Cooperatives and Cooperativism, Policy Issues and Recycling Chain, Management Systems and Process Improvement, Quality of Services Provided, Circular Economy and Informal Sector, Health Quality and Safety at Work, Barriers and Solutions for the Inclusion of the Informal Sector, Environmental, Economic and Social Benefits.

Assuntos

RESUMO

In the context of circular economy, it is known that once waste is generated, it should be subject to proper treatment for recovering material or energy before being disposed. Many countries worldwide, especially developing countries such as Brazil, have been struggling to effectively apply sustainable waste management in municipalities and still rely on dumpsites and unsuitable landfills. Misinformation, a weak legal framework, lack of financial resources and poor infra-structure as well as pressure from organizations profiting from the expansion of landfills are some factors contributing to the preservation of the negative status quo: the "landfill culture". Material recovery, i.e., recycling and composting, is applied to less than 5% of Brazilian municipal waste, while 95% is disposed of in landfills or dumpsites. In this context, ABREN WtERT (Waste-to-Energy Research and Technology Council) Brazil was created in 2019 as the first permanent organization formed to promote the development of energy and material recovery from waste focused on the waste-to-energy (WTE) market. In this paper, the strategy proposed and implemented by the organization towards changing the status quo in Brazil through an integrated sustainable waste management approach is described. The proposed strategy integrates the concepts of Sustainability and Circular Economy for minimizing landfill disposal (avoiding methane emissions) and maximizing material/energy recovery. Among others, the approach focuses on changing the public opinion regarding thermal treatment facilities, mainly incinerators, which has been wrongly linked to pollution, excessive public expenditures and considered a harm to the recycling industry. The activities performed by ABREN include engaging public and private institutions, enhancing education, leading the publication of research and business studies, gathering industry members and academy experts, as well as creating strategic alliances with players around the globe. As a result, within a few years, major outcomes were achieved in Brazil, such as: (i) changes in the legal framework, (ii) launching of a specific public auction category for sponsoring electricity production from WTE facilities, and (iii) establishment of official targets for municipalities to decrease landfill disposal and increase recycling/biological treatment and energy recovery from thermal treatment. Among the national goals, it should be highlighted the target regarding the increase from zero to 994 MW of electricity production from municipal solid waste, which will require building dozens of new WTE facilities. Global outcomes are expected as well since Brazil is the seventh largest country of the globe and the most influential in Latin America. International and national business deals should thrive due to the need of operational skills and technology imports, and the avoidance of carbon emissions will positively reflect the world climate. In parallel, there is also potential for the academy to benefit from research projects and investments if the WTE national industry is to be developed in the long term.