RESUMO

Abstract Background: Currently, there is no uniform and official terminology in Portuguese for reflectance confocal microscopy analysis, despite the increasing number of Brazilian dermatologists using this new tool. Objective: To present the terminology in Brazilian Portuguese for the description of reflectance confocal microscopy and establish the first Brazilian consensus on terms related to normal skin and cutaneous tumors. Methods: 10 Brazilian specialists from different institutions and states of Brazil were selected to evaluate the best corresponding terms in Portuguese for normal skin, melanocytic and non-melanocytic tumors. The terms used were translated from international consensuses in the English language. The modified Delphi method was used to create the consensus in 3 steps. Results: The terms considered the most appropriate in the Portuguese language to describe the findings of normal skin, melanocytic and non-melanocytic lesions in the reflectance confocal microscopy analysis were presented. Study limitations: The limitations of the present study include the number of participants and limited regional representation (only two of the five Brazilian regions were represented). Conclusion: This Brazilian consensus represents an opportunity for dermatologists and physicians specializing in cutaneous oncology to become familiar with reflectance confocal microscopy, propagating the technique in clinical and research environments to stimulate national and international publications on this subject.

RESUMO

BACKGROUND: Currently, there is no uniform and official terminology in Portuguese for reflectance confocal microscopy analysis, despite the increasing number of Brazilian dermatologists using this new tool. OBJECTIVE: To present the terminology in Brazilian Portuguese for the description of reflectance confocal microscopy and establish the first Brazilian consensus on terms related to normal skin and cutaneous tumors. METHODS: 10 Brazilian specialists from different institutions and states of Brazil were selected to evaluate the best corresponding terms in Portuguese for normal skin, melanocytic and non-melanocytic tumors. The terms used were translated from international consensuses in the English language. The modified Delphi method was used to create the consensus in 3 steps. RESULTS: The terms considered the most appropriate in the Portuguese language to describe the findings of normal skin, melanocytic and non-melanocytic lesions in the reflectance confocal microscopy analysis were presented. STUDY LIMITATIONS: The limitations of the present study include the number of participants and limited regional representation (only two of the five Brazilian regions were represented). CONCLUSION: This Brazilian consensus represents an opportunity for dermatologists and physicians specializing in cutaneous oncology to become familiar with reflectance confocal microscopy, propagating the technique in clinical and research environments to stimulate national and international publications on this subject.

Assuntos

RESUMO

ABSTRACT The occurrence of corneal ectasia after photorefractive keratectomy is a rare but serious complication of refractive surgery. Possible risk factors are not well assessed, but a probable reason is the failure to detect keratoconus preoperatively. In this report, we describe a case of corneal ectasia after photorefractive keratectomy in a patient who presented a suspicious tomography pattern preoperatively but had no degenerative alterations associated with pathologic keratoconus, as revealed by in vivo corneal confocal microscopy. We also review eligible case reports of post-photorefractive keratectomy ectasia to find similar characteristics.

RESUMO A ocorrência de ectasia corneana após ceratectomia fotorrefrativa é uma complicação rara, porém grave, em cirurgia refrativa. Os possíveis fatores de risco não são bem avaliados, mas a opinião atual é que a falha na detecção de ceratocone pré-operatório possa ser o principal motivo. Neste relato, descrevemos um caso de ectasia corneana após ceratectomia fotorrefrativa em paciente apresentando padrão tomográfico suspeito no pré-operatório, mas sem alterações degenerativas associadas a ceratocone patológico, conforme revelado por microscopia confocal in vivo da córnea. Além disso, revisamos, na literatura, relatos de casos elegíveis de ectasia pós-ceratectomia fotorrefrativa para encontrar características semelhantes.

RESUMO

Abstract Orthodontics patients usual develop demineralization and present cavity caries lesions after six months. Minimally invasive procedures have been the goal in modern dental practice. The aim of this study was to evaluate the effect of ClinproTMXT Varnish, on the enamel surface roughness and severity of white spot lesions. Twenty premolars were submitted to bond brackets and experimental induction of demineralization and randomly divided into 2 groups: GI - fluoride varnish (Colgate Duraphat®); GII - Ionomeric Sealant (ClinproTMXT Varnish). The treatment was applied around the brackets. The surface roughness of specimens was analyzed, before treatment and 12 weeks after treatment by laser confocal microscopy, and the severity of the white spot lesion was by laser fluorescence device. The data were analyzed by non-parametric Wilcoxon and Mann-Whitney Test, at 5% significance, roughness percentage reduction was performed. The severity of demineralization decreased in both, GI (p = 0.005) and GII (p = 0.019). Enamel superficial roughness levels decreased in GI and GII. As well as the roughness percentage, being more expressive in the ClinproTMXT Varnish group (85,09%). Colgate Duraphat® or Clinpro™ XT Varnish reduced the severity of the demineralization and decreased the superficial roughness on the enamel. The Clinpro™ XT Varnish was superior to superficial roughness on enamel.

Resumo Pacientes ortodônticos geralmente desenvolvem desmineralização e apresentam lesões de cárie após seis meses de tratamento. Procedimentos minimamente invasivos têm sido o objetivo na prática odontológica moderna. O objetivo deste estudo foi avaliar o efeito do ClinproTM XT selante ionomérico, ao redor do bráquete, com relação a rugosidade superficial do esmalte e a severidade da lesão induzida. Vinte pré-molares foram submetidos a colagem de bráquetes e indução experimental de desmineralização e divididos aleatoriamente em 2 grupos: GI - verniz fluoretado (Colgate Duraphat®); GII - Selante Ionomérico (ClinproTM XT). O tratamento foi aplicado ao redor dos bráquetes. A rugosidade da superfície dos espécimes foi analisada, antes do tratamento e 12 semanas após o tratamento por microscopia confocal a laser e severidade da lesão de mancha branca por dispositivo de fluorescência a laser. Os dados foram analisados pelo teste não paramétrico de Wilcoxon e Mann-Whitney, a 5% de significância. A taxa de redução da lesão foi calculada. A severidade da desmineralização diminuiu tanto no GI (p = 0,005) quanto no GII (p = 0,019). Os níveis de rugosidade superficial do esmalte diminuíram no GI e GII, assim como o percentual de rugosidade, sendo mais expressivo no grupo ClinproTMXT (85,09%). Colgate Duraphat® e Clinpro™ XT reduziram a severidade da desmineralização e diminuíram a rugosidade superficial do esmalte. O selante ionomérico Clinpro™ XT foi superior na redução percentual de rugosidade.

RESUMO

ABSTRACT Eighth-generation adhesives may be applied with total etch, selective-etch or self-conditioning, and serve as primers for non-dental substrates. Aim: To determine the bonding characteristics of universal adhesives applied to the deep pulp wall with different strategies, by means of shear bond strength and laser microscopy. Materials and Method: Cavities 4 mm deep and maximum width were carved in 36 extracted molars. Nine groups were formed according to dental substrate treatment and adhesives, as follows: Total-etch: group 1-Monobond 7 self-etch, group 2-One coat 7 universal, and group 3-Single bond universal; Adamantine etch: group 4-Monobond 7 self-etch, group 5-One coat 7 universal, and group 6-Single bond universal; Self-conditioning: group 7-Monobond 7 self-etch, group 8-One coat 7 universal, and group 9-Single bond universal. Molars were filled following the manufacturer's instructions. Three specimens per group (27 altogether) were used to determine shear bond strength using a universal testing machine, while layer thicknesses were measured on the remaining specimens using microscope images and Olympus LEXT 3D Software. Analysis of variance was used to compare data. Results: Mean (standard deviation) bond strength in megapascals (MPa) was: group 1: 7.06±3.01; group 2: 10.74±4.36; group 3: 8.20±3.92; group 4: 7.41±2.23; group 5: 6.84±1.50; group 6: 5.86±2.10; group 7: 5.83±1.94; group 8: 7.14±2.37; group 9: 8.06±3.51. Bond strength was higher (p=0.049) for total-etch (8.61±3.96) than for selective etch (6.71±1.98) and self-conditioning (6.91±2.68). No significant difference was found among the three adhesives (p=0.205). Adhesive layer in micrometers (μm) was total-etch 8.71±4.93, selective etch 5.49±1.70 and self-conditioning 6.27±3.01, with no significant difference. Conclusions: There were significant differences among bonding strategies, with the highest values for total-etch. No significant difference was observed between self-conditioning and selective etch. No significant difference was found among the adhesives, which all behaved similarly. The greatest adhesive layer thicknesses were recorded in the total-etch group, with no significant difference among the various adhesive approaches.

RESUMEN Los adhesivos universales de octava generación pueden ser aplicados con diferentes estrategias de unión: grabado total, grabado selectivo o autoacondicionamiento. Además, imprimen sustratos no dentales. Objetivo: Determinar las caracteristicas de unión de adhesivos universales con diferentes estrategias en pared pulpar profunda mediante resistencia adhesiva al corte y microscopía laser. Materiales y Método: En 36 molares se tallaron cavidades de 4 mm de profundidad y ancho máximo. Se dividieron en 9 grupos según tratamientos y adhesivos. Grabado total: grupo 1-Monobond 7 self-etching, grupo 2-One coat 7 universal y grupo 3-Single bond universal; Grabado selectivo: grupo 4-Monobond 7 self-etching; grupo 5-One coat 7 universal y grupo 6-Single bond universal y Autoacondicionamiento: grupo 7-Monobond 7 self-etching; grupo 8-One coat 7 universal y grupo 9-Single bond universal. Las obturaciones se realizaron siguiendo las instrucciones del fabricante. La resistencia adhesiva al corte se determinó utilizando una máquina de ensayo universal sobre 27 especímenes mientras que los restantes fueron empleados para evaluar los espesores de la capa generado sobre imágenes obtenidas con microscopía y con el software Olympus LEXT 3D. Se ultilizó análisis de varianza. Resultados: Resistencia adhesiva en megapascal (MPa) media (desviación estándar): grupo 1: 7,06±3,01; grupo 2: 10,74±4,36; grupo 3: 8,20±3,92; grupo 4: 7,41±2,23; grupo 5: 6,84±1,50; grupo 6: 5,86±2,10; grupo 7: 5,83±1,94; grupo 8: 7,14±2,37; grupo 9: 8,06±3,51. Grabado total (8,61±3,96) registró los valores mayores (p=0,049) en comparación a grabado selectivo (6,71±1,98) y autoacondicionamiento (6,91±2,68). Los adhesivos no tuvieron diferencias significativas (p=0,205). Capa adhesiva en μm: Grabado total (8,71±4,93); grabado selectivo (5,49±1,70) y autoacondicionamiento (6,27±3,01) sin diferencias significativas (p=0,073). Conclusiones: Las estrategias de unión mostraron diferencias significativas; los valores más altos se obtuvieron con grabado total y entre autoacondicionamiento y grabado selectivo no hubo significancia. Los adhesivos evidenciaron comportamientos similares sin registrar diferencias significativas. Los mayores espesores de capa fueron con grabado total sin diferencias significativas entre las técnicas.

RESUMO

Abstract Since its first introduction into medical practice, reflectance confocal microscopy (RCM) has been a valuable non-invasive diagnostic tool for the assessment of benign and malignant neoplasms of the skin. It has also been used as an adjunct for diagnosing equivocal cutaneous neoplasms that lack characteristic clinical or dermoscopic features. The use of RCM has led to a decreased number of biopsies of benign lesions. Multiple published studies show a strong correlation between RCM and histopathology thereby creating a bridge between clinical aspects, dermoscopy, and histopathology. Dermatopathologists may potentially play an important role in the interpretation of confocal images, by their ability to correlate histopathologic findings. RCM has also been shown to be an important adjunct to delineating tumoral margins during surgery, as well as for monitoring the non-surgical treatment of skin cancers. Advanced technology with smaller probes, such as the VivaScope 3000, has allowed access to lesions in previously inaccessible anatomic locations. This review explains the technical principles of RCM and describes the most common RCM features of normal skin with their corresponding histological correlation.

RESUMO

Since its first introduction into medical practice, reflectance confocal microscopy (RCM) has been a valuable non-invasive diagnostic tool for the assessment of benign and malignant neoplasms of the skin. It has also been used as an adjunct for diagnosing equivocal cutaneous neoplasms that lack characteristic clinical or dermoscopic features. The use of RCM has led to a decreased number of biopsies of benign lesions. Multiple published studies show a strong correlation between RCM and histopathology thereby creating a bridge between clinical aspects, dermoscopy, and histopathology. Dermatopathologists may potentially play an important role in the interpretation of confocal images, by their ability to correlate histopathologic findings. RCM has also been shown to be an important adjunct to delineating tumoral margins during surgery, as well as for monitoring the non-surgical treatment of skin cancers. Advanced technology with smaller probes, such as the VivaScope 3000, has allowed access to lesions in previously inaccessible anatomic locations. This review explains the technical principles of RCM and describes the most common RCM features of normal skin with their corresponding histological correlation.

Assuntos

RESUMO

Eighth-generation adhesives may be applied with total etch, selective-etch or self-conditioning, and serve as primers for non-dental substrates. AIM: To determine the bonding characteristics of universal adhesives applied to the deep pulp wall with different strategies, by means of shear bond strength and laser microscopy. MATERIALS AND METHOD: Cavities 4 mm deep and maximum width were carved in 36 extracted molars. Nine groups were formed according to dental substrate treatment and adhesives, as follows: Total-etch: group 1-Monobond 7 self-etch, group 2-One coat 7 universal, and group 3-Single bond universal; Adamantine etch: group 4-Monobond 7 self-etch, group 5-One coat 7 universal, and group 6-Single bond universal; Self-conditioning: group 7-Monobond 7 self-etch, group 8-One coat 7 universal, and group 9-Single bond universal. Molars were filled following the manufacturer's instructions. Three specimens per group (27 altogether) were used to determine shear bond strength using a universal testing machine, while layer thicknesses were measured on the remaining specimens using microscope images and Olympus LEXT 3D Software. Analysis of variance was used to compare data. RESULTS: Mean (standard deviation) bond strength in megapascals (MPa) was: group 1: 7.06±3.01; group 2: 10.74±4.36; group 3: 8.20±3.92; group 4: 7.41±2.23; group 5: 6.84±1.50; group 6: 5.86±2.10; group 7: 5.83±1.94; group 8: 7.14±2.37; group 9: 8.06±3.51. Bond strength was higher (p=0.049) for total-etch (8.61±3.96) than for selective etch (6.71±1.98) and self-conditioning (6.91±2.68). No significant difference was found among the three adhesives (p=0.205). Adhesive layer in micrometers (µm) was total-etch 8.71±4.93, selective etch 5.49±1.70 and self-conditioning 6.27±3.01, with no significant difference. CONCLUSIONS: There were significant differences among bonding strategies, with the highest values for total-etch. No significant difference was observed between self-conditioning and selective etch. No significant difference was found among the adhesives, which all behaved similarly. The greatest adhesive layer thicknesses were recorded in the total-etch group, with no significant difference among the various adhesive approaches.

Los adhesivos universales de octava generación pueden ser aplicados con diferentes estrategias de unión: grabado total, grabado selectivo o autoacondicionamiento. Además, imprimen sustratos no dentales. OBJETIVO: Determinar las caracteristicas de unión de adhesivos universales con diferentes estrategias en pared pulpar profunda mediante resistencia adhesiva al corte y microscopía laser. Materiales y Método: En 36 molares se tallaron cavidades de 4 mm de profundidad y ancho máximo. Se dividieron en 9 grupos según tratamientos y adhesivos. Grabado total: grupo 1-Monobond 7 self-etching, grupo 2-One coat 7 universal y grupo 3-Single bond universal; Grabado selectivo: grupo 4-Monobond 7 self-etching; grupo 5-One coat 7 universal y grupo 6-Single bond universal y Autoacondicionamiento: grupo 7-Monobond 7 self-etching; grupo 8-One coat 7 universal y grupo 9-Single bond universal. Las obturaciones se realizaron siguiendo las instrucciones del fabricante. La resistencia adhesiva al corte se determinó utilizando una máquina de ensayo universal sobre 27 especímenes mientras que los restantes fueron empleados para evaluar los espesores de la capa generado sobre imágenes obtenidas con microscopía y con el software Olympus LEXT 3D. Se ultilizó análisis de varianza. RESULTADOS: Resistencia adhesiva en megapascal (MPa) media (desviación estándar): grupo 1: 7,06±3,01; grupo 2: 10,74±4,36; grupo 3: 8,20±3,92; grupo 4: 7,41±2,23; grupo 5: 6,84±1,50; grupo 6: 5,86±2,10; grupo 7: 5,83±1,94; grupo 8: 7,14±2,37; grupo 9: 8,06±3,51. Grabado total (8,61±3,96) registró los valores mayores (p=0,049) en comparación a grabado selectivo (6,71±1,98) y autoacondicionamiento (6,91±2,68). Los adhesivos no tuvieron diferencias significativas (p=0,205). Capa adhesiva en µm: Grabado total (8,71±4,93); grabado selectivo (5,49±1,70) y autoacondicionamiento (6,27±3,01) sin diferencias significativas (p=0,073). CONCLUSIONES: Las estrategias de unión mostraron diferencias significativas; los valores más altos se obtuvieron con grabado total y entre autoacondicionamiento y grabado selectivo no hubo significancia. Los adhesivos evidenciaron comportamientos similares sin registrar diferencias significativas.

Assuntos

RESUMO

Abstract: We aimed to evaluate the penetration of endodontic cement following the removal of calcium hydroxide (Ca(OH)2) dressing using the XP-endo Finisher in association with different irrigating solutions. Sixty premolars were instrumented and applied with a Ca(OH)2 dressing. To remove Ca(OH)2, the teeth were divided into six groups, each with a different volume of sodium hypochlorite (NaOCl) and ethylenediaminetetraacetic acid (EDTA), as well as solution stirring time with XP-endo Finisher (0, 30, and 60 sec). Root canals were filled using the lateral condensation technique. Fluorescein dye was added to the cement for microscopic laser scanning analysis. In the generated images, linear measurements were taken in micrometers, and their averages were calculated. To analyze the perimeter penetration ratio of the cement, the total perimeter of the canal and the segment of the total perimeter of the canal where the endodontic cement penetrated into the dentinal tubules were measured in micrometers. We found that using an XP-endo Finisher in irrigation was more effective than using a needle and syringe during the extension and penetration of endodontic cement. Shaking with XP-endo Finisher with 17% EDTA increased the extent and perimeter of the penetration of the endodontic cement into the dentinal tubules. However, using the XP-endo Finisher with EDTA only was more efficient than using the instrument interchangeably in NaOCl and EDTA. Although XP-endo Finisher contributes to the removal of Ca(OH)2, none of the protocols or instruments used removed all Ca(OH)2 from the root system.

RESUMO

Aim: The aim of this study was to compare the microtensile bond strength (µTBS) and the characteristics of the adhesive interface of Scotchbond Universal - SU ­ etch-and-rise mode (3M ESPE) and Adper Scotchbond Multi-Purpose - MP (3M ESPE) to dentin over time. Methods: Class I cavity preparations were performed in 60 human molars that were randomly divided according to the dentin bonding system (DBS) used (n=30): (1) Acid conditioning + SU and (2) Acid conditioning + MP. For bonding strength (BS) analysis, 30 teeth (n = 15) were sectioned into sticks and submitted to the microtensile test in a universal testing machine after 24 hours and 12 months. The adhesive interface of the others 30 teeth was analyzed in a confocal microscope after 24 hours and 12 months. The data of µTBS were analyzed by two-way repeated measures ANOVA and Tukey's HSD (α = 0.05). Results: SU presented the lowest DBS compared to MP (p=0.000). Time did not influenced DBS for both adhesive systems (p=0.177). Confocal microscopy analysis showed no cracks between both adhesive systems tested. Conclusion: The results indicate that MP - µTBS showed a better performance compared to SU in total-etch mode

Assuntos

RESUMO

Aim: The aim of this study was to evaluate the effect of ethanol-conditioned dentin on endodontic sealer penetration into dentinal tubules by confocal laser scanning microscopy (CLSM). Methods: Forty human maxillary anterior teeth were instrumented and divided into four groups (n = 10) according to the drying methods: 1) wet: vacuum only, 2) paper points: vacuum + absorbent paper points, (3) 70% ethanol: 70% ethanol (1 min) + vacuum + absorbent paper points, and (4) 100% ethanol: 100% ethanol (1 min) + vacuum + absorbent paper points. All root canals were filled with resin-based endodontic sealer. Four sections from each third (cervical, middle, and apical) were examined by CLSM. Root canal wall perimeter infiltrated by sealer, maximum depth of sealer penetration, percentage of penetrated area, and fluorescence intensity of rhodamine B were measured. Statistical analysis was performed by analysis of variance and Tukey's tests (α = 0.05). Results: No statistical difference was found when percentage of root canal wall coverage infiltrated by sealer were compared. The groups in which ethanol solutions were used presented greater depth of sealer penetration, higher percentage of penetrated area, and higher fluorescence intensity of rhodamine B (p< 0.05) when compared with the wet and paper point groups. Overall, 100% ethanol produced better results than 70% ethanol, except for rhodamine B intensity (cervical third). In addition, the absorbent paper points drying method behaved better than did vacuum only group, except for rhodamine B intensity (apical third). Conclusion: Ethanol-conditioned dentin improved the penetration of resin-based sealer into dentinal tubules, especially at the concentration of 100%

Assuntos

RESUMO

The penile localization of pigmented Bowen's disease has been rarely reported and has been mostly related to human papillomavirus infection. Early diagnosis and treatment are important to prevent progression to invasive squamous cell carcinoma. However, diagnosis can be challenging because it may be difficult to distinguish from melanoma, even using dermoscopy. Reflectance confocal microscopy may be useful in suggesting the bedside diagnosis before the histopathological confirmation. A case of penile pigmented Bowen's disease is described along with its dermoscopy and reflectance confocal microscopy findings and their correlation with histopathology.

Assuntos

RESUMO

Objetivo. El objetivo de este estudio fue evaluar la adaptación marginal de coronas de disilicato de litio obtenidas mediante técnicas de escaneo (CAD/CAM), antes y des- pués de la cristalización, a través de análisis in vitro con microscopía confocal (MC). Métodos. Fueron confeccionadas 16 réplicas en poliuretano a partir de la pieza 1.4, de modelo typodont, tallada para corona total. Las réplicas fueron divididas en dos gru- pos, de acuerdo a la técnica de escaneo: Técnica Indirecta (Grupo IND, n=08), donde modelos de yeso fueron escaneados con escáner de laboratorio (inEos X5, Sirona Den- tal Systems) y Técnica Directa (Grupo DIR, n=08), donde modelos typodont fueron escaneados con escáner intraoral (CEREC BlueCam, Sirona Dental Systems). A seguir, se fresaron (inLab MC XL, Sirona Dental Systems) coronas en disilicato de litio (IPS e.max CAD, Ivoclar Vivadent) y se adaptaron a las réplicas. Se evaluó la adaptación marginal con análisis de MC en dos momentos, antes y después de la cristalización del disilicato de litio. Los datos fueron analizados con la prueba de Mann-Whitney, t de Student y Wilcoxon (α= 0,05). Resultados. Hubo una diferencia estadísticamente significativa en la adaptación marginal horizontal entre los grupos IND y DIR después de la cristalización (p=0,05). En el grupo IND, la comparación de la adaptación mar- ginal vertical antes y después de la cristalización mostró una diferencia estadísticamente significativa (p=0,038). Conclusiones. Las coronas de disilicato de litio obtenidas me- diante escaneo directo (CAD/CAM) presentaron menor desajuste marginal vertical. La etapa de cristalización afectó la adaptación marginal de las coronas.

Objective. This study aimed to evaluate lithium disilicate marginal adaption on crowns by scanning techniques (CAD/CAM), before and after crystallization, through confocal microscopy (CM) in vitro analysis. Methods. Sixteen polyurethane replicas were per- formed from tooth 1.4, of a typodont model, prepared for a full crown. The replicas were divided into two groups, according to the scanning technique: Indirect Technique (Group IND, n=08), where dental stone models were scanned with a laboratory scanner (inEos X5, Sirona Dental Systems) and Direct Technique (Group DIR, n=08), where typodont models were scanned with an intraoral scanner (CEREC BlueCam, Sirona Dental Systems). Then, the lithium disilicate crowns (IPS e.max CAD, Ivoclar Vivadent) were milled (inLab MC XL, Sirona Dental Systems) and adapted to the replicas. Margin- al adaptation was evaluated with CM analysis before and after lithium disilicate crystalli- zation. Data were analyzed with the Mann-Whitney, t test, and Wilconxon test (α=0.05). Results. There was a statistically significant difference in horizontal marginal adaptation between IND and DIR groups after crystallization (p=0.05). In IND group, the compar- ison of vertical marginal adaptation before and after crystallization showed a statistically significant difference (p=0.038). Conclusions. Lithium disilicate crowns obtained by direct scanning technique (CAD/CAD) showed less vertical marginal maladjustment. The crystallization stage affected the crown's marginal adaptation.

RESUMO

Abstract The composition of infiltrants can influence their physical properties, viscosity and depth of penetration (DP). Strategies are used to increase the DP, such as the addition of diluents or the use of heat. This study aimed to evaluate the effect of preheating and composition on physical properties and DP of infiltrants in demineralized enamel. The groups were assigned, and the following experimental formulations were made: 25%BisEMA +75%TEGDMA; 25%BisEMA +65%TEGDMA +10%ethanol; 25%BisEMA +65%TEGDMA +10%HEMA; 100%TEGDMA; 90%TEGDMA +10%ethanol; 90%TEGDMA +10%HEMA. The samples were photoactivated at two temperatures (25°C and 55°C). Degree of conversion (DC) was performed using an infrared spectrophotometer. Elastic modulus (E), flexural strength (FS) and contact angle (CA) tests were also performed. The DP of an infiltrant in demineralized enamel was determined by confocal laser scanning microscopy (CLSM) using an indirect labeling technique. The data were analyzed by two-way ANOVA and Tukey's test. DC increased after preheating in all the groups; however, 90%TEGDMA+10%ethanol showed the lowest DC for both temperatures, and the lowest E. Preheating did not influence E or FS. The CA increased at 55°C for most groups, but decreased for groups containing HEMA. Temperature did not seem to influence DP, and Icon showed the lowest DP values. The 100%TEGDMA composition showed more homogeneous penetration, whereas Icon showed heterogeneous and superficial penetration. The preheating technique does not improve all properties in all the material compositions. The composition of a material can influence and improve its properties.

Assuntos

RESUMO

Resumo Neste relato, descrevemos um caso de Distrofia corneana de Schnyder que apresentou o desfecho de seu diagnóstico baseado em achados característicos na microscopia confocal, ferramenta que se aponta em destaque no universo oftalmológico.

Abstract Schnyder's corneal dystrophy (SCD) is a rare corneal condition characterized by cholesterol and phospholipids deposition in the stroma and Bowman's layer. We present a case report of a patient who had a progressive corneal stromal haze in both eyes since he was 15 years old. Etiological diagnosis of SCD was well established by In Vivo Confocal Microscopy (IVCM).

Assuntos

RESUMO

ABSTRACT Purpose: To determine the effect of panretinal photocoagulation on optic disk topographic parameters in non-glaucomatous patients with proliferative diabetic retinopathy. Methods: This was a prospective, single-center, observational study. Thirty-eight eyes of 26 patients with diabetes underwent panretinal photocoagulation for proliferative diabetic retinopathy. Stereoscopic disk photographs and optic nerve head parameters were evaluated using the Zeiss fundus camera and the confocal scanning laser ophthalmoscope (Heidelberg Retinal Tomograph), respectively, at baseline and 12 months after the completion of panretinal photocoagulation. Results: Thirty-eight eyes of 26 patients (15 female) with a mean age of 53.7 (range 26-74) years were recruited. No significant difference was found between the stereo photography determined mean horizontal and vertical cup-to-disk ratio before and after panretinal photocoagulation treatment (p=0.461 and 0.839, respectively). The global values of the optic nerve head parameters analyzed with the HRT3 showed no significant change from baseline to 12 months, including the disk area, cup area, rim area, cup volume, rim volume, cup-to-disk area ratio, linear cup-to-disk ratio, mean cup depth, maximum cup depth, cup shape measure, height variation contour, mean retinal nerve fiber layer thickness, and cross-sectional area. Conclusion: Our results suggest that panretinal photocoagulation does not cause morphological optic disk changes in patients with diabetic proliferative retinopathy after 1 year of follow-up.

RESUMO Objetivo: Determinar o efeito da panfotocoagulação retiniana nos parâmetros topográficos do disco óptico em pacientes não glaucomatosos com retinopatia diabética proliferativa. Métodos: Este é um estudo observacional pros­pectivo e unicêntrico. Trinta e oito olhos de 26 pacientes dia­béticos foram submetidos à panfotocoagulação retiniana para retinopatia diabética proliferativa. As estereofotografias e os parâmetros do disco óptico foram avaliados usando o retinógrafo Visucam da Zeiss e o oftalmoscópio confocal de varredura a laser (Heidelberg Retinal Tomograph), respectivamente, no início e 12 meses após a conclusão da panfotocoagulação. Resultados: Trinta e oito olhos de 26 pacientes (15 mulheres) com média de idade de 53,7 anos (intervalo de 26-74) foram recrutados. Nenhuma diferença significativa foi encontrada entre a média horizontal e vertical para relação escavação/disco óptico determinadas pelas estereo­fotografias antes e após o tratamento com panfotocoagulação retiniana (p=0,461 e 0,839, respectivamente). Os valores globais dos parâmetros do disco óptico analisados com a tomografia de varredura a laser não mostraram nenhuma mudança significativa entre o início até os 12 meses, incluindo disk area, cup area, rim area, cup volume, rim volume, C/D area ratio, linear C/D ratio, mean cup depth, maximum cup depth, cup shape measure, height variation contour, mean retinal nerve fiber layer thickness e cross-sectional area. Conclusão: Nossos resultados sugerem que a panfotocoagulação retiniana não causa alterações morfológicas no disco óptico em pacientes com retinopatia diabética proliferativa após um ano de seguimento.

Assuntos

RESUMO

Abstract: Reflectance confocal microscopy (RCM) is a noninvasive imaging technique that allows visualization of the epidermis and papillary dermis with cellular-level resolution. Granulomatous reactions such as sarcoidosis could be assessed using RCM. The identification of bright beaded-like structures that could correspond to reticulin fibers overlying granulomas, in association with dermoscopy, may be a very useful approach in the diagnosis of sarcoidosis and for the differentiation of this granulomatous entity with superficial cutaneous metastasis.

Assuntos

RESUMO

Introdução: A queratose actínica (QA) é lesão pré-maligna que pode progredir para carcinoma espinocelular. O diagnóstico é clínico, dermatoscópico e por microscopia confocal. Atualmente, aborda-se o tratamento do campo cancerizável, abrangendo QAs clinicamente visíveis e subclínicas, sendo a terapia fotodinâmica (PDT) uma opção terapêutica. Objetivo: Avaliar melhora das QAs e campo cancerizável em pacientes submetidos a PDT com luz do dia, com análise clínica, dermatoscópica e por microscopia confocal. Métodos: Foram selecionados dez pacientes, com múltiplas QAs na face. Realizada a PDT utilizando luz do dia com aminolevulinato de metila e feita documentação fotográfica clínica, dermatoscópica e por microscopia confocal antes do tratamento e 60 dias após seu início. Resultados: Dos nove pacientes que completaram o tratamento, oito (88,8%) apresentaram melhora clínica e regressão no grau da QA com uma sessão. Na dermatoscopia, quatro pacientes (44,4%) apresentaram melhora significativa, três pacientes (33,3%) apresentaram melhora parcial e dois pacientes (22,2%) tiveram suas lesões estáveis. Na microscopia confocal, seis (66,6%) pacientes tiveram regressão no grau da lesão. Conclusões: A PDT com luz do dia se mostrou eficaz para tratamento de QAs, apresentando alto grau de tolerabilidade e eficácia, além de bom perfil de segurança.

Introduction: Actinic keratosis (AK) is a pre-malignant lesion that can progress to squamous cell carcinoma. The diagnosis is through clinical, dermatoscopic and confocal microscopy assessment. Currently, the approach is the treatment of the field cancerization, comprising of clinically visible and subclinical AKs, for which photodynamic therapy (PDT) is a therapeutic option. Objective: To evaluate improvement of AKs and cancerization field in patients submitted to daylight PDT, with clinical, dermatoscopic and confocal microscopy assessment. Methods: Ten patients with multiple AKs on the face were selected. Daylight PDT was performed using methyl aminolevulinate and clinical, dermatoscopic and confocal microscopy photographic documentation was performed before and 60 days after the treatment. Results: Of the nine patients who completed the treatment, 8 (88.8%) showed clinical improvement and reduction in the severity of AK with one treatment. On dermatoscopy, 4 patients (44.4%) showed significant improvement, 3 patients (33.3%) showed partial improvement and 2 patients (22.2%) had no change. On confocal microscopy, 6 (66.6%) patients presented reduction in the severity of the lesion. Conclusions: Daylight PDT proved to be effective for the treatment of AKs, with high tolerability and efficacy, besides a good safety profile.

Assuntos

RESUMO

Abstract: Surgical excision of basal cell carcinoma with minimum margins requires serial assessment of layers by frozen histopathology in the case of Mohs micrographic surgery. Evaluation of presurgical tumor margins by in vivo reflectance confocal microscopy is a potential alternative. We selected 12 basal cell carcinoma lesions that were analyzed by confocal microscopy to define margins. The lesions were excised by Mohs surgery. Six tumors showed negative margins in the first phase of Mohs micrographic surgery. We concluded that reflectance confocal microscopy can be useful in the preoperative definition of basal cell carcinoma margins.

Assuntos

RESUMO

ABSTRACT Purpose: To evaluate microstructural differences between corneas with and without Kayser-Fleischer rings in age-matched subjects with Wilson's disease with neurological symptoms, using confocal laser scanning microscopy. Methods: The study included 12 subjects with Wilson's disease with neurological symptoms. Twelve corneas presented clinically with classic Kayser-Fleischer rings, visible on slit lamp examination; the other 12 served as controls. The subjects underwent a comprehensive clinical examination. Microstructural analysis using confocal laser scanning microscopy evaluated increased corneal thickness, decreased number of cells, increased debris or specific deposits, and unusual microstructures. Results: Clinically, the subjects with Kayser-Fleischer rings had similar corneal findings and normal intraocular pressure; two had typical sunflower cataracts and decreased visual acuity. The control eyes all presented normal visual acuity, intraocular pressure, and corneal appearance. The microstructural analysis demonstrated similar findings in all the affected corneas. Compared with the control corneas, there were fewer keratocytes in the anterior stroma (17.380 vs. 22.380/mm3). Round, "hollow" dark areas were observed between the keratocytes; these were universal and similar in appearance in all affected corneas and all cornea layers. In the peripheral posterior stroma, there were dust-like, bright, granular deposits that tended to increase in number and density toward Descemet's membrane, masking the peripheral endothelium. The control corneas presented a normal microstructure apart from dust-like granular deposits in the periphery. Conclusions: In vivo confocal microscopy is a useful tool for evaluating the corneal microstructure when a Kayser-Fleischer ring is clinically present. The ring consists of granular, bright particles that increase in density toward Descemet's membrane, and is associated with a decreased number of keratocytes and peculiar dark, round areas in all stromal layers, probably a sign of corneal damage. When the ring is not visible in subjects with Wilson's disease, changes to the corneal microstructure are insignificant.

RESUMO Objetivo: Avaliar, ao nível microestrutural, através de microscopia confocal in vivo a lazer, 12 córneas com anel de Kayser-Fleischer visível ao exame da lâmpada de fenda e compará-las com 12 córneas clinicamente normais de indivíduos com idades correspondentes aos pacientes com doença de Wilson e sintomas neurológicos. Métodos: O estudo incluiu 12 indivíduos com doença de Wilson e sintomas neurológicos (24 córneas). Doze córneas apresentavam clinicamente o anel clássico de Kayser-Fleischer e as outras 12 serviram como controle. Todos os pacientes foram submetidos a um exame clínico abrangente e a uma análise microestrutural subsequente utilizando microscopia confocal in vivo de varredura a laser. Os principais resultados observados foram: aumento da espessura da córnea, diminuição do número de células, aumento de resíduos/depósitos específicos e microestrutura atípica. Resultados: Clinicamente, todos os indivíduos com anel de Kayser-Fleischer (12 olhos) apresentaram achados similares da córnea e pressão intraocular normal. Dois indivíduos também apresentaram uma catarata de girassol típica e diminuição da acuidade visual. Todos os olhos do grupo controle apresentaram acuidade visual, pressão intraocular e aparência corneana normais. A microscopia confocal in vivo com varredura a laser revelou achados semelhantes em todas as córneas afetadas. O número de ceratócitos no estroma anterior era menor, 17.380/mm3 (22.380/mm3 no grupo controle), e entre eles foram identificadas áreas escuras arredondadas "vazias". Essas zonas escuras eram generalizadas e similares em todas as córneas examinadas e em todas as camadas da córnea. No estroma posterior periférico, havia presença de depósitos granulares brilhantes e com aparência de pó que tendiam a aumentar em número e densidade no sentido da membrana de Descemet, mascarando o endotélio periférico. As córneas controle apresentaram estrutura normal, com exceção de depósitos granulares com aparência de pó na periferia. Conclusões: A microscopia confocal in vivo é uma ferramenta útil para a avaliação da microestrutura da córnea quando o anel de Kayser-Fleischer está clinicamente presente. O anel é constituído de partículas granulares brilhantes com densidade aumentada no sentido da membrana de Descemet. Sua presença está associada com uma diminuição do número de ceratócitos e com áreas circulares escuras "peculiares" em todas as camadas estromais, que representam, provavelmente, um sinal de dano da córnea. Quando o anel não está clinicamente visível, a estrutura da córnea in vivo encontra-se insignificantemente alterada.

Assuntos