RESUMO

A hiperplasia hemimandibular é responsável por prejuízos estéticos, funcionais, motores e psicossociais. Com etiologia incerta, ocorre frente ao desequilíbrio de fatores regulatórios de crescimento presentes na camada cartilaginosa do côndilo. O relato objetiva descrever a tomada de decisões baseada em exames complementares específicos aliados à adequada intervenção cirúrgica da lesão. Paciente gênero feminino, 33 anos de idade, compareceu à clínica particular com queixa principal de "face assimétrica", foi requerido uma avaliação cintilográfica objetivando e confirmando a interrupção do crescimento condilar, descartando a hipótese de Osteocondroma e condilectomia. Após preparo ortodôntico prévio, os exames tomográficos foram utilizados na criação de um protótipo que foi impresso após a realização dos movimentos ósseos planejados. Mediante à reconstrução, foi concluído que a assimetria presente não seria totalmente corrigida somente através da intervenção ortognática, sendo necessária também uma osteotomia removendo parte da base do corpo e ângulo mandibular, através da confecção de um guia de corte, promovendo à reanatomização sem a necessidade de acesso extra oral submandibular, evitando uma cicatriz em face feminina. Paciente encontra-se em pós-operatório de 60 meses, sem queixas e satisfeita. Portanto, é evidenciado cada vez mais a influência positiva que o planejamento virtual pode trazer aos profissionais na otimização dos resultados cirúrgicos.

Hemimandibular hyperplasia is responsible for aesthetic, functional, motor, and psychosocial impairments. With an uncertain etiology, it occurs due to the imbalance of regulatory growth factors present in the cartilaginous layer of the condyle. The report aims to describe decision-making based on specific complementary exams combined with the appropriate surgical intervention for the condition. A 33-year-old female patient presented at a private clinic with the main complaint of "asymmetric face." A scintigraphic evaluation was requested to objectively confirm the interruption of condylar growth, ruling out the hypothesis of Osteochondroma and condylectomy. After prior orthodontic preparation, tomographic exams were used to create a prototype that was printed after planned bone movements. Through the reconstruction, it was concluded that the existing asymmetry would not be entirely corrected through orthognathic intervention alone, necessitating also an osteotomy to remove part of the base of the body and mandibular angle. This was done through the creation of a cutting guide, allowing for reanatomization without the need for submandibular extraoral access, thus avoiding a scar on the female face. The patient is 60 months postoperative, with no complaints and satisfied. Therefore, the increasingly positive influence of virtual planning on optimizing surgical outcomes for professionals is evident.

Assuntos

RESUMO

Introdução: A parestesia é uma neuropatia que afeta a função sensorial. O Laser de Baixa Potência (LBP), por sua vez, apresenta propriedades analgésicas, bioestimuladoras e reparadoras. Objetivo: Realizar um levantamento na literatura científica sobre os aspectos gerais e benefícios do LBP no manejo terapêutico da parestesia, além de identificar a classificação e métodos de obtenção do diagnóstico desta condição. Materiais e Métodos: Tratou-se de uma revisão narrativa da literatura através da busca nas plataformas PubMed, SciELO, LILACS e Google Schoolar. Após o cruzamento dos descritores com os operadores booleanos e aplicação dos critérios de inclusão/exclusão, 26 estudos foram incluídos. Resultados: A parestesia pode ser classificada em neuropraxia, axonotmese e neurotmese, subdivididas em Grau I ao V. Seu diagnóstico pode ser executado através de testes subjetivos e objetivos. O LBP compreende em um dispositivo tecnológico com efeitos analgésico, anti-inflamatório e fotobiomodulador, que estimula o reparo neural. Os estudos mostram que a dosimetria nos comprimentos de onda vermelho e infravermelho, aplicação intra e extra oral, e com mais de uma sessão semanal exerce efeito modulatório positivo do reparo neural, com retorno progressivo da atividade sensitiva. Além disso, os estudos trazem uma ampla variação no número de pontos de aplicação, bem como no tempo de irradiação e quantidade de sessões, em virtude da extensão e tempo de diagnóstico da parestesia. Considerações finais: Apesar da alta complexidade da parestesia, o LBP exerce efeitos benéficos através do retorno da sensibilidade parcial ou total, além de ser um dispositivo bem tolerado pelo organismo e minimamente invasivo.

Introduction: Paresthesia is a neuropathy that affects sensory function. The Low-Level Laser (LLL), in turn, has analgesic, biostimulating and reparative properties. Purpose: Carry out a survey at the scientific literature on the general aspects and benefits of LLL in the therapeutic management of paresthesia in addition to identifying the classification and methods for obtaining a diagnosis of this condition. Materials and Methods: It was a narrative literature review through search in platforms PubMed, SciELO, LILACS and Google Schoolar. After crossing the descriptors with boolean operators and applying the inclusion/exclusion criteria, 26 articles were included in this study. Results: Paresthesia can be classified into neuropraxia, axonotmesis and neurotmesis, subdivided into Grades I to V. Its diagnostic can be carried out through subjective and objective tests. The LLL consists in a technological device with analgesic, anti-inflammatory and photobiomodulatory effects, which stimulates neural repair. Studies show that LLL in dosimetry at red and infrared wavelengths with intra and extra oral application and with more than one-week use exerts a positive modulatory effect on neural repair, with a progressive return of sensory activity. Furthermore, the studies show a wide variation in the number of application points, as well as the irradiation time and number of sessions, due to the extent and time of diagnosis of paresthesia. Final Considerations: Despite the high complexity of paresthesia, the LLL has beneficial effects through the return of partial or total sensitivity in addition being a device well tolerated by the body and minimally invasive.

Assuntos

RESUMO

Implant-supported complete dentures are a common procedure for patients with mandibular edentulism problems. This article documents the protocol for immediate functional loading of fixed transient mandibular prostheses with fully moldable attachments and distal extensions to prevent fractures. A 56-year-old female patient was referred to the Oral Rehabilitation and Implantology Service due to periodontal problems, difficulty in chewing capacity and aesthetic compromise. The patient was treated in a single surgical procedure with dental extractions, guided regularization of the alveolar process and guided placement of five interforaminal implants and placement of functional fixed mandibular prostheses with immediate loading with personalized UCLA'S, distal extensions and short arc occlusal scheme. At 3 months postoperatively, the definitive placement of fixed mandibular metal acrylic prostheses and conventional upper prostheses was performed. The functional and aesthetic integrity of the fixed mandibular prosthesis implant preserved with UCLA'S documents that implant placement in the interforaminal zone with an immediate loading protocol is a viable treatment option for prosthetic rehabilitation of the fully edentulous mandibular arch and that design with distal extensions in the posterior sector of the mandibular arch is an effective option to avoid fracture of the prostheses, presenting a survival of the five mandibular implants of 100% at 1 year postoperatively.

RESUMO

Objective: This study aims to identify fracture patterns on the lingual aspect of the mandible following Bilateral Sagittal Osteotomy of the Mandibular Ramus and correlate these patterns with mandibular anatomical characteristics in patients with cleft lip and palate. Methods: Two hundred cone beam CT scans were analyzed, with 100 scans in the preoperative period to assess mandibular anatomy and 100 in the postoperative period to evaluate the course of fractures on the lingual surface after surgery. Results: Statistical analysis revealed no correlation between the depth of the mandibular fossa and the type of fracture after bilateral sagittal osteotomy. Similarly, there was no association between the height and angle of the mandibular body and the type of fracture. The most common fracture type observed was the type 3 pattern, characterized by a line running through the mandibular canal. Furthermore, no relationship was identified between the studied anatomical aspects and the occurrence of undesired fractures. Conclusions: The anatomical data presented in this study can assist surgeons in selecting the safest surgical techniques and optimal osteotomy sites, particularly in patients with cleft lip and palate.

Objetivo: Este estudio tiene como objetivo identificar los patrones de fractura en la superfície lingual de la mandíbula después de la osteotomía sagital bilateral de la rama mandibular y correlacionar estos patrones con las características anatómicas mandibulares en pacientes com fisura labiopalatina. Métodos: Se analizaron doscientas tomografías computarizadas de haz cónico, con cien tomografías en el período preoperatorio para evaluar la anatomía mandibular y cien en el período postoperatorio para evaluar el curso de las fracturas en la superficie lingual después de la cirugía. Resultados: El análisis estadístico no reveló correlación entre la profundidad de la fosa mandibular y el tipo de fractura después de la osteotomía sagital bilateral. Del mismo modo, no hubo asociación entre la altura y el ángulo del cuerpo mandibular y el tipo de fractura. El tipo de fractura más común observado fue el patrón tipo 3, caracterizado por una línea que atraviesa el canal mandibular. Además, no se identificó relación entre los aspectos anatómicos estudiados y la ocurrencia de fracturas no deseadas. Conclusiones: Los datos anatómicos presentados en este estudio pueden ayudar a los cirujanos a seleccionar las técnicas quirúrgicas más seguras y los sitios de osteotomía óptimos, especialmente en pacientes con fisura labiopalatina.

RESUMO

A useful approach to deepen our knowledge about the origin and evolution of venom systems in Reptilia has been exploring the vast biodiversity of this clade of vertebrates in search of orally produced proteins with toxic actions, as well as their corresponding delivery systems. The occurrence of toxins in anguimorph lizards has been demonstrated experimentally or inferred from reports of the toxic effects of the oral secretions of taxa within the Varanidae and Helodermatidae families. In the present study, we have focused on two alligator lizards of the Anguidae family, the Mexican alligator lizard, Abronia graminea, and the red-lipped arboreal alligator lizard, A. lythrochila. In addition, the fine morphology of teeth of the latter species is described. The presence of a conserved set of proteins, including B-type natriuretic peptides, cysteine-rich secretory proteins, group III phospholipase A2, and kallikrein, in submandibular gland extracts was demonstrated for both Abronia species. These proteins belong to toxin families found in oral gland secretions of venomous reptile species. This finding, along with previous demonstration of toxin-producing taxa in both paleo- and neoanguimorpha clades, provides further support for the existence of a handful of conserved toxin families in oral secretions across the 100+ million years of Anguimorpha cladogenesis.

Assuntos

RESUMO

Objetivo: El cóndilo mandibular bífido es una alteración morfológica de la articulación temporomandibular en la que el cóndilo presenta un surco en la superficie superior que genera dos cabezas condilares. Esta alteración puede ser unilateral o bilateral. La mayoría de los cóndilos mandibulares bífidos se detectan mediante radiografías panorámicas, sin embargo, la tomografía computarizada Cone Beam de articulación temporomandibular es considerado el examen de elección para el diagnóstico de esta alteración. El propósito de este trabajo es presentar un caso de cóndilo mandibular bífido bilateral detectado incidentalmente mediante una tomografía computarizada Cone Beam solicitada por un diagnóstico presuntivo de osteoartritis. Caso clínico: Una paciente de 22 años sin antecedentes de traumatismos cráneo faciales solicita una tomografía computarizada Cone Beam de articulaciones temporomandibulares por diagnóstico presuntivo de osteoartritis. En la exploración del volumen se encontraron cóndilos mandibulares bífidos con dos cabezas condilares, medial y lateral de forma bilateral, siendo más acentuado en el cóndilo derecho.(AU)

Aim: The bifid mandibular condyle is a morphological alteration of the temporomandibular joint in which the condyle has a groove on its upper surface that generates two condylar heads. This alteration can be unilateral or bilateral. Most bifid mandibular condyles are detected by panoramic radiographs, however, Cone Beam computed tomography of the temporomandibular joint is considered the test of choice for the diagnosis of this alteration. The purpose of this work is to present a case of bilateral bifid mandibular condyle, incidentally detected by Cone Beam computed tomography requested for a presumptive diagnosis of osteoarthritis. Clinical case: A 22-year old female patient with no history of craniofacial trauma requests a Cone Beam computed tomography of the temporomandibular joints due to a presumptive diagnosis of osteoarthritis. In the volume exploration, bifid mandibular condyles were found with two condylar heads, medial and lateral bilaterally, being more accentuated in the right condyle.(AU)

RESUMO

El torus mandibular es un crecimiento exofítico óseo benigno en la parte interna de la mandíbula, generalmente presente en ambos lados. Su etiología se relaciona a diversos factores como la herencia, grado de estrés, factores ambientales, nutricionales y trauma oclusal. Puede causar problemas funcionales y estéticos, como dificultad en la pronunciación, mal aliento, molestias al comer con prótesis mal adaptadas y ulceraciones. En la mayoría de los casos no es necesario el tratamiento, excepto cuando se requiere para mejorar la función protésica o solucionar problemas funcionales. En este artículo presentamos la situación clínica que describe la escisión exitosa del torus mandibular bilateral en un paciente de 57 años para la posterior rehabilitación protésica. La escisión del torus mandibular bilateral es un procedimiento seguro y predecible que ayuda a prevenir complicaciones protésicas y biológicas, mejorando la estabilidad y la función del sistema estomatognático (AU)

The mandibular torus is a benign bony exophytic growth in the inner part of the mandible, usually present on both sides. Its etiology is related to various factors such as heredity, degree of stress, environmental and nutritional factors, and occlusal trauma. It can cause functional and aesthetic problems, such as difficulty in pronunciation, bad breath, discomfort when eating with ill-fitting prostheses, and ulcerations. In most cases, treatment is not necessary, except when it is required to improve prosthetic function or solve functional problems. In this article we present the clinical situation that describes the successful excision of the bilateral mandibular torus in a 57-year-old patient for subsequent prosthetic rehabilitation. Bilateral mandibular torus excision is a safe and predictable procedure that helps prevent prosthetic and biological complications, improving the stability and function of the stomatognathic system (AU)

Assuntos

RESUMO

OBJECTIVE: To share our experience in creating precise anatomical models using available open-source software. METHODS: An affordable method is presented, where from a DICOM format of a computed tomography, a segmentation of the region of interest is achieved. The image is then processed for surface improvement and the DICOM format is converted to STL. Error correction is achieved and the model is optimized to be printed by stereolithography with a desktop 3D printer. RESULTS: Precise measurements of the dimensions of the DICOM file (CT), the STL file, and the printed model (3D) were carried out. For the C6 vertebra, the dimensions of the horizontal axis were 55.3 mm (CT), 55.337 mm (STL), and 55.3183 mm (3D). The dimensions of the vertebral body were 14.2 mm (CT), 14.551 mm (STL), and 14.8159 mm (3D). The length of the spinous process was 18.2 mm (CT), 18.283 mm (STL), and 18.2266 mm (3D), while its width was 8.5 mm (CT), 8.3644 mm (STL), and 8.3226 mm (3D). For the C7 vertebra, the dimensions of the horizontal axis were 58.6 mm (CT), 58.739 mm (STL), and 58.7144 mm (3D). The dimensions of the vertebral body were 14 mm (CT), 14.0255 mm (STL), and 14.2312 mm (3D). The length of the spinous process was 18.7 mm (CT), 18.79 mm (STL), and 18.6458 mm (3D), and its width was 8.9 mm (CT), 8.988 mm (STL), and 8.9760 mm (3D). CONCLUSION: The printing of a 3D model of bone tissue using this algorithm is a viable, useful option with high precision.

OBJETIVO: Compartir nuestra experiencia para crear modelos anatómicos precisos utilizando software con licencia abierta disponibles. MÉTODOS: Se presenta un método asequible, en donde a partir de un formato DICOM de una tomografía computarizada se logra una segmentación de la región de interés. Posteriormente se procesa la imagen para una mejora de superficie y se realiza la conversión de formato DICOM a STL. Se logra la corrección de errores y se optimiza el modelo para luego ser impreso por medio de estereolitografía con una impresora 3D de escritorio. RESULTADOS: Se efectuaron mediciones precisas de las dimensiones del archivo DICOM (TC), del archivo STL y del modelo impreso (3D). Para la vértebra C6, las dimensiones del eje horizontal fueron 55.3 mm (TC), 55.337 mm (STL) y 55.3183 mm (3D). Las dimensiones del cuerpo vertebral fueron 14.2 mm (TC), 14.551 mm (STL) y 14.8159 mm (3D). La longitud de la apófisis espinosa fue de 18.2 mm (TC), 18.283 mm (STL) y 18.2266 mm (3D), mientras que su ancho fue de 8.5 mm (TC), 8.3644 mm (STL) y 8.3226 mm (3D). Para la vértebra C7, las dimensiones del eje horizontal fueron 58.6 mm (TC), 58.739 mm (STL) y 58.7144 mm (3D). Las dimensiones del cuerpo vertebral fueron 14 mm (TC), 14.0255 mm (STL) y 14.2312 mm (3D). La longitud de la apófisis espinosa fue de 18.7 mm (TC), 18.79 mm (STL) y 18.6458 mm (3D), y su ancho fue de 8.9 mm (TC), 8.988 mm (STL) y 8.9760 mm (3D). CONCLUSIÓN: La impresión de un modelo en 3D de tejido óseo mediante este algoritmo resulta una opción viable, útil y con una alta precisión.

Assuntos

RESUMO

INTRODUCTION: Medication-associated osteonecrosis of the jaws (MRONJ) is characterized by the presence of exposed bone or an intraoral or extraoral fistula in the maxillofacial region in patients with a history of treatment with anti-resorptive and anti-angiogenic drugs, such as monoclonal antibodies, and without a history of radiotherapy or metastatic diseases in the area. OBJECTIVE: The aim of this study is to report a case of a pathological mandibular fracture in an area of MRONJ in a patient diagnosed with Crohn's disease treated with infliximab. CASE REPORT: A 53-year-old male patient, an active smoker for 35 years, diagnosed with Crohn's disease, undergoing intravenous administration of infliximab 300 mg for 1 year and 3 months, with no previous history of anti-angiogenic or anti-resorptive medication, presenting with an extraoral fistula in the submandibular region for 4 months, with painful symptoms, diagnosed as MRONJ. He was initially treated conservatively, using antimicrobial photodynamic therapy (aPDT), antibiotic therapy, and the PENTO protocol. However, the patient evolved with a pathological fracture in the mandibular parasymphysis, requiring surgical reconstruction. FINAL CONSIDERATIONS: Pathological fracture of the mandible is a complication of MRONJ that compromises the patient's quality of life. The management of patients with MRONJ is complex and challenging.

RESUMO

BACKGROUND: This study aims primarily to assess the mandibular condyles and patient response to MAD therapy using cone-beam computed tomography (CBCT). Also, the study proposes to analyze whether variations in condylar position, OSA severity and mandibular protrusion influence patient response. METHODS: 23 patients diagnosed with mild/moderate OSA and treated with MAD comprised the sample. Clinical, CBCT, and PSG assessments were conducted at baseline and with MAD in therapeutic protrusion (4-6 months of MAD use). The condyle position was vertically and horizontally evaluated at baseline and at the therapeutic protrusion. RESULTS: The condyle position significantly changed with MAD, showing anterior (7.3 ± 2.8 mm; p < 0.001) and inferior (3.5 ± 1 mm; p < 0.001) displacement. Patients with mild OSA required more protrusion (p = 0.02) for improvement. Responders exhibited a significantly prominent (p = 0.04) anterior baseline condyle position. A negative modest correlation was found between treatment response and baseline condyle anterior position (p = 0.03; r=-0.4), as well as between OSA severity and the percentage of maximum protrusion needed for therapeutic protrusion (p = 0.02; r=-0.4). The patient protrusion amount did not predict condylar positional changes. Neither condyle position, OSA severity, nor therapeutic protrusion were predictors of MAD treatment response. CONCLUSION: MAD resulted in anterior and inferior condylar displacement, and the amount of protrusion did not predict condylar positional changes. Responders showed a more anterior baseline condyle position. OSA severity and mandibular protrusion did not predict treatment response.

Assuntos

RESUMO

Hyperplasia of the coronoid process is a rare alteration that is characterized by the exaggerated and progressive development of said process over periods of months or years, both in height and volume, which finally causes mandibular hypomobility. It is important to highlight the importance of imaging for the correct diagnosis and treatment of said entity, taking into consideration the great variety of differential diagnoses that can occur. In this sense, conventional radiographs constitute a basic and indispensable tool for approaching the diagnosis. However, it is actually the CT scan that offers the greatest precision. The case of a 14-year-old male patient is presented, with no contributing medical history, who was referred for presenting progressive opening limitation since childhood, for which, after clinical and imaging evaluation, he was treated with total bilateral coronoidectomy, postoperative follow-up was performed. for a year in which recurrence of said entity could be observed. This case demonstrates the importance of correct diagnosis, as well as postoperative control and the rehabilitation scheme carried out by the patient.

RESUMO

Batoids (rays and skates) are cartilaginous fishes whose jaws are not articulated directly to the neurocranium. The only point of contact between them are the hyomandibular cartilages, resulting in a unique mandibular suspension called euhyostyly. Due to this decoupling of the jaws from the skull, muscles play an essential role in modulating mandibular movements during the feeding process, especially during mandibular protrusion. The main objectives of our study were: (1) to examine the mandibular musculature of eight batoid species from different orders in the Batoidea and (2) establish a standardized musclulature terminology for future comparative myological studies in batoids. For each muscle bundle, the general characteristics of each cranial muscle were described and their origin and insertions were identified. The number of muscle bundles differed intraspecifically. On the dorsal surface, we reported the first evidence of the presence of the precranial muscle (PCM) in U. halleri, as well as the ethmoideo-parethmoidalis muscle (ETM) in R. velezi, P. glaugostigma and Z. exasperata; in addition, the insertion of the spiracularis muscle (SP) extended to the ventral surface of the oropharyngeal tract in myliobatiforms. On the ventral surface of the head, both N. entemedor and M. californica exhibited additional muscles in the mandibular area. These muscles were renamed as part of the standardization of mandibular terminology: the depressor mandibularis minor (DMM) in N. entemedor and the adductor mandibulae profundus (AMP) in M. californica. The standardization of terminology is essential for futures studies of the mandibular apparatus in batoids, to facilitate the morphological description of muscles in species without anatomical accounts and for continuity in broader comparative analyses.

RESUMO

Ankylosis of the temporomandibular joint (TMJ) is a condition in which the mandibular condyle fuses with the mandibular fossa through fibrous or bone tissue. It is a debilitating pathology that interferes with chewing, speaking, and oral hygiene. Currently, alloplastic reconstruction is considered the gold standard for treating severely compromised TMJs, such as in ankylosis. The article describes a patient with a history of facial trauma, with bilateral ankylosis of the TMJs, inability to open his mouth, and poor dental condition. Due to a long period of immobilization of approximately 40 years, the initial treatment plan was to remove the ankylosis bilaterally and install customized PMMA (polymethylmethacrylate) spacers. The patient gained mouth opening and improved chewing quality with one year of customized spacer use prior to definitive alloplastic replacement with stock-type TMJ prostheses. Customized joint spacers are a provisional treatment option when definitive alloplastic reconstruction is not indicated. Spacers provide the patient with progressive jaw function and mobility gains.

RESUMO

PURPOSE: The aim of this study is to delineate the safety zone concerning the anteriorization of the AL and correlate it with the behavior of the AL, analyzing its feasibility. METHODS: Adhering to the Joanna Briggs Institute (JBI) manual guidelines, both the protocol and this review were conducted based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses Extension for Scoping Reviews (PRISMA-ScR) checklist. MeSH terms, combined with free terms, were utilized to search for articles in the following databases: Embase, LILACS, LIVIVO, PubMed/MEDLINE, Scopus, Web of Science, and grey literature. RESULTS: Fifteen articles were select following the eligibility criteria. An average safe zone of 4.75 mm in humans was observed, with a prevalence 60.8% and average anterior length of the AL of 2.09 mm in humans. CONCLUSION: The AL has varied patterns across different populations, then, it could not be asserted a 100% safe zone. Preoperative analysis of the AL with CBCT is always necessary. While it could be stated that a safe zone should be employed as an inviolable region, stipulated measures of a safe zone should be regarded as an area of greater attention in preoperative planning.

Assuntos

RESUMO

PURPOSE: To assess the presence of mandibular canal bifurcation (BMC) and classify these variations by correlating findings with sex, age and facial skeletal pattern, measurements were made, including height, width, and distance from bifurcation to anatomical cortical bones. METHODS: BMC was identified in cone beam CT exams of 301 patients and classified according to its origin, location, direction, configuration and ending. The height and width of the MC before and after the bifurcation; height and width of the BMC; and distance from BMC to alveolar (C1), buccal (C2), lingual (C3) and basal (C4) bone cortices were measured. All data were correlated with sex, age, and facial skeletal pattern (class I, II, III). The significance level was 5%. RESULTS: 67 BMC (22.26%) were identified in 55 patients (18.28%). Bifurcations were more prevalent in females (p = 0.57), aged 18-39 years (p = 0.40), class I (p = 0.77). Single bifurcations, located in the posterior region of the mandible, originating in the MC, with a superior direction and ending in the retromolar foramen were more prevalent (p > 0.05). Mean cortical measurements were higher in male individuals, with significant differences only at C1 (p = 0.03). The mean height and width of BMC were 2.24 (± 0.62) and 1.75 (± 0.45) mm. There was no association between BMC classification and the variables studied (p > 0.05). CONCLUSION: Approximately 1/5 of the population studied had BMC. There were no associations of BMC presence or characteristics with sex, age, and facial skeletal pattern. The distance from bifurcation to alveolar (superior) cortical bone is greater in male individuals.

Assuntos

RESUMO

Obstructive Sleep Apnea (OSA) is a common medical disorder and the most impacting sleep disturbance. OSA derive from the narrowing of the upper airway during sleep, which result in recurrent episodes of ventilatory disturbances expressed by an increased airflow resistance (flow limitation and hypopneas) and often an absence of ventilation (apneas). The high heterogeneity in the clinical picture of OSA turns diagnostic and treatment challenging. In the last decade different phenotypes, referring to specific categories of patients that can be distinguished from others by features and related clinical meaningful attributes, were identified. Those phenotypes may predict clinically important outcomes as those deriving from MAD therapy.

Assuntos

RESUMO

SUMMARY: The mandibular foramen and its canal are one of the most important structures in the skull, as they solely supply the mandible through their associated nerves and vessels. Many anatomical variations have been reported in the literature until now, and this case report represents a clear-cut appearance of its shape in a panoramic radiograph, which is not mostly seen in normal panoramic radiographs. These factors are of utmost importance when it comes to performing various surgeries and preventing complications due to their varied anatomy, which will allow dentists to create a better treatment plan and provide better treatments without any complications.

El foramen mandibular y su canal son algunas de las estructuras más importantes del cráneo y cara, ya que a través de ellos la mandíbula es inervada por nervios e irrigada por vasos. Hasta ahora, en la literatura consultada, se han informado de numerosas variaciones anatómicas. En este trabajo reportamos la forma y trayecto del foramen y canal mandibular, obtenidos en una radiografía panorámica, que no es observada normalmente en este tipo de radiografía. Los factores anatómicos son de importancia a la hora de realizar las cirugías para prevenir complicaciones debido a su variada anatomía, permitiendo a los odontólogos crear un mejor plan de tratamiento sin ningún tipo de complicaciones.

Assuntos

RESUMO

SUMMARY: The mandibular first premolar is commonly a single-rooted tooth with occasional presentation of radicular variations. This tooth usually has one root with only one canal (97.9 %). Presence of three canals is very rare. Anomalies may appear during odontogenesis which can lead to anatomical variations in teeth. Similarly, these variations may be associated with characteristics that can be attributed to specific population groups. Due to their low frequency, these additional canals can easily be missed. For this reason, a meticulous knowledge of tooth morphology and their possible anatomical variations are necessary, and the presence of extra roots and canals should be always considered before initiation of root canal treatment. Additionally, different radiographs and appropriated access cavity preparation is needed to ensure a success endodontic treatment. This article reports a diagnosis and endodontic treatment of a mandibular first premolar with three canals.

El primer premolar mandibular suele ser un diente unirradicular con presentación ocasional de variaciones radiculares. Este diente suele tener una raíz con un solo conducto (97,9 %). La presencia de tres canales es muy rara. Durante la odontogénesis pueden aparecer anomalías que pueden provocar variaciones anatómicas en los dientes. De manera similar, estas variaciones pueden estar asociadas con características que pueden atribuirse a grupos de población específicos. Debido a su baja frecuencia, estos canales adicionales pueden pasar desapercibidos fácilmente. Por esta razón, es necesario un conocimiento meticuloso de la morfología dental y sus posibles variaciones anatómicas, y siempre se debe considerar la presencia de raíces y conductos adicionales antes de iniciar el tratamiento de conducto. Además, se necesitan diferentes radiografías y una preparación adecuada de la cavidad de acceso para garantizar un tratamiento de endodoncia exitoso. Este artículo reporta un diagnóstico y tratamiento endodóntico de un primer premolar mandibular con tres canales.

Assuntos

RESUMO

Introduction: The morphology of the root canal of the first premolars is not always the same and therefore a good knowledge of its dental anatomy is essential. Aim: To assess the morphology of roots and root canals of mandibular first premolars in a Peruvian population using cone-beam computed tomography (CBCT). Materials and Methods: This was a descriptive cross-sec-tional study. A total of 370 mandibular first premolars fulfilling the inclusion criteria were evaluated using CBCT, and the number of roots and root canals, the Vertucci's classification of root canal configuration, age, sex and side of the tooth were registered. Results: One and two roots were presented in 96.2% (n=356) and 3.8% (n=14), respectively, of the mandibular first premolars analyzed, and one canal was present in 67.6% (n=250) and two canals in 32.2% (n=119). A type I root canal configuration was found in 67.6% (n=250) of the cases followed by type V with 26.2% (n=97). A statistically significant association was found between the number of roots and canals (p<0.001) and age also had a significant influence on this variable (p=0.0043). Conclusions: The presence of one canal in mandibular first premolars is the most frequent, although there is a considerable prevalence of two in the population studied. The number of roots is associated with the number of canals, with age having a significant influence on these variables.

Introducción: La morfología del canal radicular de los primeros premolares no siempre es la misma y por ello es fundamental un buen conocimiento de su anatomía dental. Objetivo: Evaluar la morfología de las raíces y conductos radiculares de primeros premolares mandibulares en una población peruana mediante tomografía computarizada de haz cónico. Materiales y Métodos: Este fue un estudio transversal descriptivo. Se evaluaron mediante tomografías un total de 370 primeros premolares mandibulares que cumplían con los criterios de inclusión, y se registró el número de raíces y conductos radiculares, la clasificación de Vertucci de la configuración radicular, la edad, el sexo y el lado del diente. Se realizaron las pruebas de chi-cuadrado y una regresión logística binaria (p<0,05). Resultado: Se presentó una y dos raíces en el 96,2% (n=356) y 3,8% (n=14), respectivamente, de los primeros premolares mandibulares analizados, y un canal estuvo presente en el 67,6% (n=250) y dos canales en el 32,2% (n=119). Se encontró una configuración del conducto radicular tipo I en el 67,6% (n=250) de los casos seguido del tipo V con un 26,2% (n=97). Se encontró una asociación estadísticamente significativa entre el número de raíces y conductos (p<0.001) y la edad también influyó significativamente en esta variable (p=0.0043). Conclusión: La presencia de 1 canal en primeros premolares mandibulares es la más frecuente, aunque existe una prevalencia considerable de 2 en la población estudiada. El número de raíces está asociado al número de canales, teniendo la edad una influencia significativa en estas variables.

Assuntos

RESUMO

A coronectomia consiste no procedimento em que se faz a remoção da coroa do dente deixando a raiz in situ. Tal técnica é indicada para dentes posteriores impactados que apresentem proximidade com o canal mandibular representando assim um risco ao nervo mandibular caso seja feita uma exodontia. O seguinte trabalho tem como objetivo demonstrar os aspectos positivos relacionados ao emprego da técnica de coronectomia para dentes posteriores impactados. Foram realizadas buscas bibliográficas nas bases de dados PUBMED, MEDLINE e sciELO usando os descritores "coronectomia", "coronectomy", "terceiros molares impactados", "trigeminal", "nerve damage", respeitando critérios de relevância quanto ao tema foram selecionados 31 artigos. Sabe-se que pelo canal mandibular passa o nervo alveolar inferior e esse é responsável pela inervação sensitiva de estruturas anatômicas importantes, logo dentes impactados que tenham grande proximidade com o canal mandibular quando empregadas técnicas de exodontia correm o risco de lesionar o nervo podendo gerar perda da sensibilidade de forma passageira ou permanente, a indicação para realização da técnica precisa ser feita posteriormente à análise radiográfica e tomográfica da relação do dente com o canal mandibular. A técnica consiste na remoção da coroa do dente e o suficiente da raiz abaixo da crista vestibular e lingual do osso, para que esse possa desencadear um processo de cicatrização natural sobre as raízes retidas. Conclui-se que a coronectomia é um procedimento alternativo seguro e eficaz para casos específicos que se tem indicação e apresenta prognóstico favorável.

The coronectomy consists of the procedure in which the crown of the tooth is removed leaving the root in situ. This technique is indicated for impacted posterior teeth in close proximity to the mandibular canal representing a risk to the mandibular nerve if an extraction is performed. The following study has the porpouse to demonstrate the positive aspects related to the use of the coronectomy technique for impacted posterior teeth. Bibliographic searches were carried out in the databases PUBMED, MEDLINE, sciELO, using the DeCS "coronectomy", "odontectomy", "trigeminal", "nerve damage", respecting the criterion of relevance to the topic, 31 articles were selected. It is known that the inferior alveolar nerve passes through the mandibular canal and is responsible for the sensitive innervation of important anatomical structures, so impacted teeth that are very close to the mandibular canal when extraction techniques are used has the risk of injuring the nerve, which may lead to temporary or permanent loss of sensitivity, the indication for performing the technique needs to be made after the radiographic and tomographic analysis of the affinity between the tooth and the mandibular canal. The technique consists of removing the crown of the tooth and enough of the root below the buccal and lingual crest of the bone, so that it can trigger a natural healing process on the retained roots. It is concluded that coronectomy is a safe and effective alternative procedure for specific cases that are indicated and have a favorable prognosis.

Assuntos