RESUMO

OBJECTIVE: In this study a dentistry nanocomposite with prolonged antibacterial activity using silica nanoparticles (SNPs) loaded with chlorhexidine (CHX) was developed. METHODS: SNPs were coated with the Layer-by-Layer technique. Dental composites were prepared with organic matrix of BisGMA/TEGDMA and SNPs with or without CHX (0, 10, 20 or 30% w/w). The physicochemical properties of the developed material were evaluated and agar diffusion method was used to test the antibacterial. In addition, the biofilm inhibitory activity of the composites was evaluated against S. mutans. RESULTS: SNPs were rounded with diameters about 50 nm, the organic load increased with increasing deposited layers. Material samples with SNPs loaded with CHX (CHX-SNPs) showed the highest values of post-gel volumetric shrinkage, that ranged from 0.3% to 0.81%. Samples containing CHX-SNPs 30% w/w showed the highest values of flexural strength and modulus of elasticity. Only samples containing SNPs-CHX showed growth inhibition against S. mutans, S. mitis and S. gordonii in a concentration-dependent manner. The composites with CHX-SNPs reduced the biofilm formation of S. mutans biofilm at 24 h and 72 h. SIGNIFICANCE: The nanoparticle studied acted as fillers and did not interfere with the evaluated physicochemical properties while providing antimicrobial activity against streptococci. Therefore, this initial study is a step forward to the synthesis of experimental composites with improved performance using CHX-SNPs.

Assuntos

RESUMO

The main objective of the present work was to design a biomimetic free-standing multilayered PEM film, constructed by the layer-by-layer (LbL) assembly approach, based on natural biopolymers and intended to recreate the complex mucus-mimetic matrices in order to provide mechanistic insights into biophysical interactions between drugs and the physiological gel-forming mucin network of mucus that covers the mucosal epithelia named as(CS/ALG)/(PGM) PEM film. The obtained results indicate that mucin may delay or increase drug precipitation on the mucus layer, depending on specific drug-mucin interactions driving drug supersaturation or drug crystallization phenomena. It was found that the drug lipophilicity characteristics governed the mucin binding degree, which had an influencing role on the drug translocation across this gel-like hydrogel. Moreover, the ionization of these drugs did not have a significant role on the drug binding ability to mucin as much as the lipophilicity properties did. The (CS/ALG)/(PGM) PEM film may be a promising tool to routine testing drug-mucus interactions to evaluate biophysical interactions between this protective barrier of the organism against different drug therapeutic products or external aggressive agents, leading to the optimization of drug delivery products or drugs for particular disease states.

Assuntos

RESUMO

Self-assembly of natural polymers constitute a powerful route for the development of functional materials. In particular, layer-by-layer (LBL) assembly constitutes a versatile technique for the nanostructuration of biobased polymers into multilayer films. Gelatin has gained much attention for its abundance, biodegradability, and excellent gel-forming properties. However, gelatin gels melt at low temperature, thus limiting its practical application. With respect to the above considerations, here, we explored the potential application of gelatin gels as a matrix for protein delivery at physiological temperature. A model protein, bovine serum albumin (BSA), was encapsulated within gelatin gels and then coated with a different number of bilayers of alginate and chitosan (10, 25, 50) in order to modify the diffusion barrier. The coated gel samples were analyzed by means of Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) and confocal Raman spectroscopy, and it was found that the multilayer coatings onto polymer film were interpenetrated to some extent within the gelatin. The obtained results inferred that the coating of gelatin gels with polysaccharide multilayer film increased the thermal stability of gelatin gels and modulated the BSA release. Finally, the influence of a number of bilayers onto the drug release mechanism was determined. The Ritger-Peppas model was found to be the most accurate to describe the diffusion mechanism.

RESUMO

Los materiales poliméricos han sido ampliamente investigados para aplicaciones biomédicas, teniendo especial relevancia cuando se encuentran en forma de micro- y nano-partículas. Últimamente se ha ampliado su campo de aplicación al ser conjugados con péptidos y ácidos nucleicos, por lo tanto, el interés en el estudio de este tipo de materiales, así como también en la formulación de nanoestructuras funcionalizadas como materiales, dispositivos y vehículos de transporte de agentes terapéuticos ha aumentado. Las recientes investigaciones en nanosistemas se inspiran en fenómenos naturales que estimulan la integración de señales moleculares y la mimetización de procesos a nivel celular, de tejidos y órganos. Tecnológicamente, la capacidad de obtener nanoestructuras esféricas mediante la combinación de materiales que presenten propiedades distintas a las que ningún otro material individual posee por sí solo, es lo que hace que las nanocápsulas sean particularmente atractivas. Las potenciales ventajas de los sistemas de nanopartículas de tipo polimérico se destacan a lo largo de cada parte de este artículo de revisión. El presente artículo aborda los aspectos más relevantes sobre la estructura, composición y algunos métodos de elaboración de los sistemas nanoparticulados. Además, expone algunos de los trabajos más recientes, centrados en sistemas de nanopartículas basados en polímeros dirigidos a la administración de agentes, publicados en artículos especializados de investigación y revisiones durante los últimos años.

Polymeric materials have been extensively investigated for biomedical applications including micro- and nanoparticles. Modern advances have broadened horizons for application with peptides and nucleic acids. Therefore, interests increased in the formulation of materials, devices and vehicles for transporting therapeutic agents in functionalized nanostructures. Recent nano-systems are inspired by natural phenomena that stimulate the integration of molecular signals and the mimicking of natural cellular processes, at tissue and organ levels. Technologically, the ability to obtain spherical nanostructures, which combine different properties, that no other single material possesses on its own, makes nanocapsules particularly attractive. Potential advantages over polymer nanoparticulate systems are highlighted throughout each part of this review article. Here, we address the most relevant aspects of structure, composition and methods of formulation of nanoparticulate systems. In addition, we outline some of the more recent works focusing on nanosized preparations, based on agent-directed polymers, found in specialized research articles that have emerged in the recent years.

Assuntos

RESUMO

Remotely assisted drug delivery by means of magnetic biopolymeric nanoplatforms has been utilized as an important tool to improve the delivery/release of hydrophobic drugs and to address their low cargo capacity. In this work, MnFe2O4 magnetic nanoparticles (MNPs) were synthesized by thermal decomposition, coated with citrate and then functionalized with the layer-by-layer (LbL) assembly of polyelectrolyte multilayers, with chitosan as polycation and sodium alginate as polyanion. Simultaneous conductimetric and potentiometric titrations were employed to optimize the LbL deposition and to enhance the loading capacity of nanoplatforms for curcumin, a hydrophobic drug used in cancer treatment. ~200 nm sized biopolymer platforms with ~12 nm homogeneously embedded MNPs were obtained and characterized by means of XRD, HRTEM, DLS, TGA, FTIR, XPS and fluorescence spectroscopy techniques to access structural, morphological and surface properties, to probe biopolymer functionalization and to quantify drug-loading. Charge reversals (±30 mV) after each deposition confirmed polyelectrolyte adsorption and a stable LbL assembly. Magnetic interparticle interaction was reduced in the biopolymeric structure, hinting at an optimized performance in magnetic hyperthermia for magneto-assisted drug release applications. Curcumin was encapsulated, resulting in an enhanced payload (~100 µg/mg). Nanocytotoxicity assays showed that the biopolymer capping enhanced the biocompatibility of nanoplatforms, maintaining entrapped curcumin. Our results indicate the potential of synthesized nanoplatforms as an alternative way of remotely delivering/releasing curcumin for medical purposes, upon application of an alternating magnetic field, demonstrating improved efficiency and reduced toxicity.

Assuntos

RESUMO

Multiple layers of whey protein and sodium alginate were assembled onto gelled alginate microparticles using electrostatic interaction. An experimental design was employed to evaluate the effect of the concentration of both hydrocolloids on the amount of protein that was adsorbed. In the first layer, a higher protein adsorption 32.5% w/w was obtained at pH 3.75. In the multilayered particle, the protein adsorbed reached 64.9% w/w. An analysis of protein solubilisation verified that 22% w/w was solubilised at an acidic pH (pH 2.0). The protein solubilisation increased with ionic strength, reaching 19.5% w/w in the highest NaCl concentration evaluated (200 mM). The particles were partially resistant to gastric conditions, with 30.5% w/w of total nitrogen protein solubilisation occurring after 2 h at pH 2.0; however, they did not resist the artificial intestine conditions, reaching 86.0% w/w of total nitrogen protein solubilisation after 5 h.

Assuntos

RESUMO

Polyphenols have attracted attention due to their antioxidant capacity and beneficial effects to health. Therefore, fast, inexpensive, and efficient methods to discriminate and to quantify polyphenols are of interest for food industry. In this paper, Layer-by-Layer films of poly(allylamine hydrochloride) and iron tetrasulfonated phthalocyanine were employed as sensor for determination of polyphenols in green tea (camellia sinensis), and green and roasted mate teas (ilex paraguariensis). The polyphenol sensor was tested in catechol standard solution by differential pulse voltammetry (DPV), reaching a limit of detection of 1.76 × 10-7 mol/L. The determination of polyphenols in the tea samples was obtained by analytical curve and catechol standard addition using electrochemical techniques. Projection techniques (information visualization) were applied to the DPV results of the tea samples and a pattern of separation following the phenolic content was obtained. The results support the application of the sensor in fast classification of beverages according to their polyphenol content.

Assuntos

RESUMO

This paper reports the study and characterization of a new platform for practical applications, where the use of phaeophytin-b (phaeo-b), a compound derived from chlorophyll, was characterized and investigated for sensing purposes. Modified electrodes with nanostructured phaeo-b films were fabricated via the layer-by-layer (LbL) technique, where phaeo-b was assembled with cashew gum, a polysaccharide, or with poly(allylamine) hydrochloride (PAH). The multilayer formation was investigated with UV-Vis spectroscopy by monitoring the absorption band associated to phaeo-b at approximately 410 nm, where distinct molecular interactions between the materials were verified. The morphology of the films was analyzed by atomic force microscopy (AFM). The electrochemical properties through redox behavior of phaeo-b were studied with cyclic voltammetry. The produced films were applied as sensors for hydrogen peroxide (H2O2) detection. In terms of sensing, the cashew/phaeo-b film exhibited the most promising result, with a fast response and broad linear range upon the addition of H2O2. This approach provides a simple and inexpensive method for development of a nonenzymatic electrochemical sensor for H2O2.

Assuntos