RESUMO
(TiO2) is both a natural and artificial compound that is transparent under visible and near-infrared light. However, it could be prepared with other metals, substituting for Ti, thus changing its properties. In this article, we present density functional theory calculations for Ti(1-x)AxO2, where A stands for any of the eight following neutral substitutional impurities, Fe, Ni, Co, Pd, Pt, Cu, Ag and Au, based on the rutile structure of pristine TiO2. We use a fully unconstrained version of the density functional method with generalized gradient approximation plus the U exchange and correlation, as implemented in the Quantum Espresso free distribution. Within the limitations of a finite-size cell approximation, we report the band structure, energy gaps and absorption spectrum for all these cases. Rather than stressing precise values, we report on two general features: the location of the impurity levels and the general trends of the optical properties in the eight different systems. Our results show that all these substitutional atoms lead to the presence of electronic levels within the pristine gap, and that all of them produce absorptions in the visible and near-infrared ranges of electromagnetic radiation. Such results make these systems interesting for the fabrication of solar cells. Considering the variety of results, Ni and Ag are apparently the most promising substitutional impurities with which to achieve better performance in capturing the solar radiation on the planet's surface.
RESUMO
In recent decades, two-dimensional (2D) perovskites have emerged as promising semiconductors for next-generation photovoltaics, showing notable advancements in solar energy conversion. Herein, we explore the impact of alternative inorganic lattice BX-based compositions (B=Ge or Sn, X=Br or I) on the energy gap and stability. Our investigation encompasses BA2Man-1BnX3n+1 2D Ruddlesden-Popper perovskites (for n=1-5 layers) and 3D bulk (MA)BX3 systems, employing first-principles calculations with spin-orbit coupling (SOC), DFT-1/2 quasiparticle, and D3 dispersion corrections. The study unveils how atoms with smaller ionic radii induce anisotropic internal and external distortions within the inorganic and organic lattices. Introducing the spacers in the low-layer regime reduces local distortions but widens band gaps. Our calculation protocol provides deeper insights into the physics and chemistry underlying 2D perovskite materials, paving the way for optimizing environmentally friendly alternatives that can efficiently replace with sustainable materials.
RESUMO
The category of 2D carbon allotropes has gained considerable interest due to its outstanding optoelectronic and mechanical characteristics, which are crucial for various device applications, including energy storage. This study uses density functional theory calculations, ab initio molecular dynamics (AIMD), and classical reactive molecular dynamics (MD) simulations to introduce TODD-Graphene, an innovative 2D planar carbon allotrope with a distinctive porous arrangement comprising 3-8-10-12 carbon rings. TODD-G exhibits intrinsic metallic properties with a low formation energy and stability in thermal and mechanical behavior. Calculations indicate a substantial theoretical capacity for adsorbing Li atoms, revealing a low average diffusion barrier of 0.83 eV. The metallic framework boasts excellent conductivity and positioning TODD-G as an active layer for superior lithium-ion battery efficiency. Charge carrier mobility calculations for electrons and holes in TODD-G surpass those of graphene. Classical reactive MD simulation results affirm its structural integrity, maintaining stability without bond reconstructions at 2200 K.
RESUMO
This is an update of a previous review (Naumiset al2017Rep. Prog. Phys.80096501). Experimental and theoretical advances for straining graphene and other metallic, insulating, ferroelectric, ferroelastic, ferromagnetic and multiferroic 2D materials were considered. We surveyed (i) methods to induce valley and sublattice polarisation (P) in graphene, (ii) time-dependent strain and its impact on graphene's electronic properties, (iii) the role of local and global strain on superconductivity and other highly correlated and/or topological phases of graphene, (iv) inducing polarisationPon hexagonal boron nitride monolayers via strain, (v) modifying the optoelectronic properties of transition metal dichalcogenide monolayers through strain, (vi) ferroic 2D materials with intrinsic elastic (σ), electric (P) and magnetic (M) polarisation under strain, as well as incipient 2D multiferroics and (vii) moiré bilayers exhibiting flat electronic bands and exotic quantum phase diagrams, and other bilayer or few-layer systems exhibiting ferroic orders tunable by rotations and shear strain. The update features the experimental realisations of a tunable two-dimensional Quantum Spin Hall effect in germanene, of elemental 2D ferroelectric bismuth, and 2D multiferroic NiI2. The document was structured for a discussion of effects taking place in monolayers first, followed by discussions concerning bilayers and few-layers, and it represents an up-to-date overview of exciting and newest developments on the fast-paced field of 2D materials.
RESUMO
Amoebiasis is the second leading cause of death worldwide associated with parasitic disease and is becoming a critical health problem in low-income countries, urging new treatment alternatives. One of the most promising strategies is enhancing the redox imbalance within these susceptible parasites related to their limited antioxidant defense system. Metal-based drugs represent a perfect option due to their extraordinary capacity to stabilize different oxidation states and adopt diverse geometries, allowing their interaction with several molecular targets. This work describes the amoebicidal activity of five 2-(Z-2,3-diferrocenylvinyl)-4X-4,5-dihydrooxazole derivatives (X = H (3a), Me (3b), iPr (3c), Ph (3d), and benzyl (3e)) on Entamoeba histolytica trophozoites and the physicochemical, experimental, and theoretical properties that can be used to describe the antiproliferative activity. The growth inhibition capacity of these organometallic compounds is strongly related to a fine balance between the compounds' redox potential and hydrophilic character. The antiproliferative activity of diferrocenyl derivatives studied herein could be described either with the redox potential, the energy of electronic transitions, logP, or the calculated HOMO-LUMO values. Compound 3d presents the highest antiproliferative activity of the series with an IC50 of 23 µM. However, the results of this work provide a pipeline to improve the amoebicidal activity of these compounds through the directed modification of their electronic environment.
Assuntos
Amebicidas , Entamoeba histolytica , Amebicidas/farmacologia , Antioxidantes , EletrônicaRESUMO
In this work, the structural, electronic, and optical stability properties of the chitosan monomer (M-Ch) and atomic silver complex are reported, as well as a unitary cell of a silver cluster in the gas phase and acetic acid. The generalized gradient approximation HSEh1PBE/def2-TZVPP50 results established the structures' anionic charge (Q = -1|e|) and the doublet state (M = 2). The high cohesive energy indicates structural stability, and the quantum-mechanical descriptors show a high polarity and low chemical reactivity. Also, the quantum-mechanical descriptors present a low work function that shows the structures are suitable for applications in light-emitting diodes. Finally, the electronic behavior observed by the |HOMO-LUMO| gap energy changes depending on the atomic silver incorporated into the complex.
RESUMO
Herein, we describe the synthesis, crystal structure, and electronic properties of {[K2(dmso)(H2O)5][Ni2(H2mpba)3]·dmso·2H2O}n (1) and [Ni(H2O)6][Ni2(H2mpba)3]·3CH3OH·4H2O (2) [dmso = dimethyl sulfoxide; CH3OH = methanol; and H4mpba = 1,3-phenylenebis(oxamic acid)] bearing the [Ni2(H2mpba)3]2- helicate, hereafter referred to as {NiII2}. SHAPE software calculations indicate that the coordination geometry of all the NiII atoms in 1 and 2 is a distorted octahedron (Oh) whereas the coordination environments for K1 and K2 atoms in 1 are Snub disphenoid J84 (D2d) and distorted octahedron (Oh), respectively. The {NiII2} helicate in 1 is connected by K+ counter cations yielding a 2D coordination network with sql topology. In contrast to 1, the electroneutrality of the triple-stranded [Ni2(H2mpba)3] 2- dinuclear motif in 2 is achieved by a [Ni(H2O)6]2+ complex cation, where the three neighboring {NiII2} units interact in a supramolecular fashion through four R22(10) homosynthons yielding a 2D array. Voltammetric measurements reveal that both compounds are redox active (with the NiII/NiI pair being mediated by OH- ions) but with differences in formal potentials that reflect changes in the energy levels of molecular orbitals. The NiII ions from the helicate and the counter-ion (complex cation) in 2 can be reversibly reduced, resulting in the highest faradaic current intensities. The redox reactions in 1 also occur in an alkaline medium but at higher formal potentials. The connection of the helicate with the K+ counter cation has an impact on the energy levels of the molecular orbitals; this experimental behavior was further supported by X-ray absorption near-edge spectroscopy (XANES) experiments and computational calculations.
RESUMO
Experimental realizations of two-dimensional materials are hardly free of structural defects such as e.g. vacancies, which, in turn, modify drastically its pristine physical defect-free properties. In this work, we explore effects due to point defect clustering on the electronic and transport properties of bilayer graphene nanoribbons, for AA and AB stacking and zigzag and armchair boundaries, by means of the tight-binding approach and scattering matrix formalism. Evident vacancy concentration signatures exhibiting a maximum amplitude and an universality regardless of the system size, stacking and boundary types, in the density of states around the zero-energy level are observed. Our results are explained via the coalescence analysis of the strong sizeable vacancy clustering effect in the system and the breaking of the inversion symmetry at high vacancy densities, demonstrating a similar density of states for two equivalent degrees of concentration disorder, below and above the maximum value.
RESUMO
The development of conjugated polymer-based nanocomposites by adding metallic particles into the polymerization medium allows the proposition of novel materials presenting improved electrical and optical properties. Polyaniline Emeraldine-salt form (ES-PANI) has been extensively studied due to its controllable electrical conductivity and oxidation states. On the other hand, tungsten oxide (WO3) and its di-hydrated phases, such as WO3·2H2O, have been reported as important materials in photocatalysis and sensors. Herein, the WO3·2H2O phase was directly obtained during the in-situ polymerization of aniline hydrochloride from metallic tungsten (W), allowing the formation of hybrid nanocomposites based on its full oxidation into WO3·2H2O. The developed ES-PANI-WO3·2H2O nanocomposites were successfully characterized using experimental techniques combined with Density Functional Theory (DFT). The formation of WO3·2H2O was clearly verified after two hours of synthesis (PW2 nanocomposite), allowing the confirmation of purely physical interaction between matrix and reinforcement. As a result, increased electrical conductivity was verified in the PW2 nanocomposite: the DFT calculations revealed a charge transfer from the p-orbitals of the polymeric phase to the d-orbitals of the oxide phase, resulting in higher conductivity when compared to the pure ES-PANI.
RESUMO
The application of strain to 2D materials allows manipulating the electronic, magnetic, and thermoelectric properties. These physical properties are sensitive to slight variations induced by tensile and compressive strain and the uniaxial strain direction. Herein, we take advantage of the reversible semiconductor-metal transition observed in certain monolayers to propose a hetero-bilayer device. We propose to pill up phosphorene (layered black phosphorus) and carbon monosulfide monolayers. In the first, such transition appears for positive strain, while the second appears for negative strain. Our first-principle calculations show that depending on the direction of the applied uniaxial strain; it is possible to achieve reversible control in the layer that behaves as an electronic conductor while the other layer remains as a thermal conductor. The described strain-controlled selectivity could be used in the design of novel devices.
RESUMO
Polypyrrole (PPy) is one of the most attractive conducting polymers for thin film applications due to its good electrical conductivity, stability, optical properties, and biocompatibility. Among the technologies in which PPy has gained prominence are optoelectronics and solar energy conversion, where transparent electrodes such as fluorine-doped tin oxide (FTO) or indium tin oxide (ITO) are frequently used. However, FTO substrates have the notable advantage that their components are widely available in nature, unlike those of ITO. Recognizing the importance that the FTO/polypyrrole system has gained in various applications, here, we studied for the first time the nucleation and growth mechanism of electro-synthesized PPy on FTO. Additionally, the effect of the synthesis potential (0.9, 1.0, 1.1, and 1.2 V vs. Ag/AgCl) on the homogeneity, adhesion, conductivity, and HOMO energy levels of PPy films was determined. From current-time transients and scanning electron microscopy, it was found that films synthesized at 0.9 and 1.0 V exhibit 3D growth with progressive nucleation (as well as lower homogeneity and higher adhesion to FTO). In contrast, films synthesized at 1.1 and 1.2 V follow 2D growth with instantaneous nucleation. It was also evident that increasing the polymerization potential leads to polymers with lower conductivity and more negative HOMO levels (versus vacuum). These findings are relevant to encourage the use of electro-synthesized PPy in thin film applications that require a high control of material properties.
RESUMO
In this work, the interaction of GaN nanotube (GaNNT) with common air pollutants of industrialized cities, such as NH3, NO2 and SO2 in different configurations was studied. For this study, the single-walled (10,0) GaNNT was used. The analysis was done via the density functional theory implemented in the SIESTA simulation software. The analysis of the results shows that the air pollutants alter the properties of nanotubes when they interact with them. The stability analysis shows that the most stable configurations are those in which adsorption occurs through a chemical process. The systems remain semiconductors, but in the case of NO2 and SO2 molecules interacting with GaNNT, there was a significant reduction in the energy gap. Our results also indicate that GaNNT is a promising material to detect and remove NH3 and NO2 molecules from the environment; however, it may be not applicable to detect or remove SO2, because the latter interacts strongly with the nanotube, which prevents the GaNNT from being reused.
RESUMO
Recently, the need of improvement of energy storage has led to the development of Lithium batteries with porous materials as electrodes. Porous Germanium (pGe) has shown promise for the development of new generation Li-ion batteries due to its excellent electronic, and chemical properties, however, the effect of lithium in its properties has not been studied extensively. In this contribution, the effect of surface and interstitial Li on the electronic properties of pGe was studied using a first-principles density functional theory scheme. The porous structures were modeled by removing columns of atoms in the [001] direction and the surface dangling bonds were passivated with H atoms, and then replaced with Li atoms. Also, the effect of a single interstitial Li in the Ge was analyzed. The transition state and the diffusion barrier of the Li in the Ge structure were studied using a quadratic synchronous transit scheme.
RESUMO
Dinuclear manganese (II- III) compounds, which are potential models of the active center of catalase, were synthetized. This type of metalloenzymes presents biological importance due to three factors: they are redox catalyst centres, they are able to carry out hydrolytic reactions and they participate in activated processes via Lewis acids. Structurally, their active centre is composed by dinuclear manganese compounds, linked to nitrogen and oxygen donor atoms. An octahedral geometry around the metal ions were found, with acetate, hydroxy and aquo ligands; which can work as molecule bridges between them. The acid medium favours the electronic transfer between Mn3+ - Mn2+ as redox centre at 1.559 V and the consequent oxidation of hydrogen peroxide or organic molecules. The work also reports the data of two chiral novel compounds, [Mn2(S,S(+)Hcpse)4(NaClO4)2(NaOH)(CH4O)]n·[(C2H6O)2]n·[(CH4O)2]n and its respective enantioisomer, in which µ-oxo being as bridge metal centre. The X-ray structural was obtained as well as the optical and magnetic properties using Circular Dichroism, Electronic Paramagnetic Resonance, Magnetic Susceptibility and X-ray photoelectron spectroscopy.
RESUMO
Two new aromatic organo-imido polyoxometalates with an electron donor triazole group ([n-Bu4N]2[Mo6O18NC6H4N3C2H2]) (1) and a highly conjugated fluorene ([n-Bu4N]2[Mo6O18NC13H9]) (2) have been obtained. The electrochemical and spectroscopic properties of several organo-imido systems were studied. These properties were analysed by the theoretical study of the redox potentials and by means of the excitation analysis, in order to understand the effect on the substitution of the organo-imido fragment and the effect of the interaction to a metal centre. Our results show a bathochromic shift related to the charge transfer processes induced by the increase of the conjugated character of the organic fragment. The cathodic shift obtained from the electrochemical studies reflects that the electronic communication and conjugation between the organic and inorganic fragments is the main reason of this phenomenon.
Assuntos
Estrutura Molecular , Eletricidade Estática , Compostos de Tungstênio/química , Técnicas de Química Sintética , Eletroquímica , Modelos Moleculares , Conformação Molecular , Compostos de Tungstênio/síntese químicaRESUMO
The structural and electronic properties of FeCl3 and CrO3 interacting with (10,0) GaNNT were obtained using first principles calculations based on the density functional theory. The results show that for the CrO3 interacting with the GaNNT, the structure was locally deformed. However, in case of FeCl3 adsorbed with the GaNNT, the structure remained practically the same with the negligible deformation observed on tube surface. The projected density of states for the pristine GaNNT was modified with adsorption of FeCl3 molecule by the appearance of three strongly localized states in gap region. In case of GaNNT plus CrO3 molecule, one strongly localized level appeared in energy gap region with high contributions of molecule atoms. The analysis of the binding energy shows that the CrO3 interacting with the GaNNT is more favorable and the process occurs through chemisorption regime in both systems. Graphical Abstract Projected density of states of pristine GaNNT and FeCl3 interacting with GaNNT.
RESUMO
In this work we use the ab initio calculations to study the intercalation of lithium (Li) atoms in the channels of the single-wall boron nitride nanotube (BNNT) bundles. The relaxed structure as well as the electronic band structure were obtained. Results reveals that Li insertion modifies the band structure by shifting the Fermi energy to conduction band. The Li atoms act as electron donors and this modifies the electronic properties of the BNNT bundles due the intercalation. The electronic properties changes induced in the effects are dependent on Li atom numbers per nanotube.
RESUMO
Novel chalcone derivatives with different substituents attached to A and B-rings: hydroxyl, methoxyl, geranyl, and prenyl groups were synthesized. The obtained compounds were characterized by NMR, HRMS, UV-Vis, IR, and MS. The theoretical analysis was carried out in all the compounds using density functional theory (DFT) with the B3LYP, PBE0, and M06-2X functionals in combination with the 6-311G(d,p) Pople-type basis set. The excited state properties were calculated by time dependent density functional theory (TD-DFT) using the same methodology applied for the ground state properties. The calculated vertical absorption wavelengths (λmax) in gas phase and in ethanol as a solvent are consistent with the experimental ones, being the TD-DFT:B3LYP/6-311G(d,p) and PCM-TD-DFT:PBE0/6-311G(d,p) the best methodologies for these calculations with good approximation to the experimental values. The calculated reorganization energies indicated that, the four chalcone derivatives present an electron transfer character due to the smaller registered values. From these parameters it is proposed that these show an n-type semiconductor character. The localization of the frontier orbitals (HOMO and LUMO) shows that only the compound containing a hydroxyl group on the A-ring displays a marked delocalization favoring the charge-transfer process in this system. The HOMO-LUMO gap energies indicate that the inclusion of different donor groups in the rings does not improve the obtained values for this property. Graphical Abstract Relationship between spectroscopic and geometrical properties of chalcones were carried out using quantum-chemical calculations and compared with experimental values.
Assuntos
Chalconas/química , Elétrons , Espectroscopia de Ressonância Magnética/métodos , Espectrometria de Massas/métodos , Espectrofotometria Ultravioleta/métodos , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Análise Espectral Raman/métodosRESUMO
The morphology, microstructure, chemistry, electronic properties, and electrochemical behavior of a boron-doped nanocrystalline diamond (BDD) thin film grown on quartz were evaluated. Diamond optically transparent electrodes (OTEs) are useful for transmission spectroelectrochemical measurements, offering excellent stability during anodic and cathodic polarization and exposure to a variety of chemical environments. We report on the characterization of a BDD OTE by atomic force microscopy, optical spectroscopy, Raman spectroscopic mapping, alternating-current Hall effect measurements, X-ray photoelectron spectroscopy, and electrochemical methods. The results reported herein provide the first comprehensive study of the relationship between the physical and chemical structure and electronic properties of a diamond OTE and the electrode's electrochemical activity.
RESUMO
A series of new 2-aminonaphthoquinones and related compounds were synthesized and evaluated in vitro as trypanocidal and cytotoxic agents. Some tested compounds inhibited epimastigote growth and trypomastigote viability. Several compounds showed similar or higher activity and selectivity as compared with current trypanocidal drug, nifurtimox. Compound 4l exhibit higher selectivity than nifurtimox against Trypanosoma cruzi in comparison with Vero cells. Some of the synthesized quinones were tested against cancer cells and normal fibroblasts, showing that certain chemical modifications on the naphthoquinone moiety induce and excellent increase the selectivity index of the cytotoxicity (4g and 10). The results presented here show that the anti-T. cruzi activity of 2-aminonaphthoquinones derivatives can be improved by the replacement of the benzene ring by a pyridine moiety. Interestingly, the presence of a chlorine atom at C-3 and a highly lipophilic alkyl group or aromatic ring are newly observed elements that should lead to the discovery of more selective cytotoxic and trypanocidal compounds.