RESUMO

Ni-MoS2/γ-Al2O3 catalysts are commonly used in hydrotreating to enhance fossil fuel quality. The extensive research on these catalysts reveals a gap in understanding the role of Ni, often underestimated as an inactive sulfide phase or just a MoS2 promoter. In this work, we focused on analyzing whether well-dispersed supported nickel nanoparticles can be active in the hydrodesulfurization of dibenzothiophene. We dispersed Ni by Strong Electrostatic Adsorption (SEA) method across four supports with different types of acidity: silica (~ neutral acidity), γ-Al2O3 (Lewis acidity), H+-Y zeolite, and microporous-mesoporous H+-Y zeolite (both with Brønsted-Lewis acidity). Our findings reveal that Ni is indeed active in dibenzothiophene hydrodesulfurization, even with alumina and silica as supports, although their catalytic activity declines abruptly in the first hours. Contrastingly, the acid nature of zeolites imparts sustained stability and performance, attributed to robust metal-support interactions. The efficacy of the SEA method and the added mesoporosity in zeolites further amplify catalytic efficiency. Overall, we demonstrate that Ni nanoparticles may perform as a hydrogenating metal in the same manner as noble metals such as Pt and Pd perform in hydrodesulfurization. We discuss some of the probable reasons for such performance and remark on the role of Ni in hydrotreatment.

RESUMO

Biodesulfurization is a promising alternative for removing sulfur molecules from the polycyclic aromatic sulfur compounds (PASC) found in petroleum. PASC consists of recalcitrant molecules that can degrade fuel quality and cause a range of health and environmental problems. Therefore, identifying bacteria capable of degrading PASC is essential for handling these recalcitrant molecules. Microorganisms in environments exposed to petroleum derivatives have evolved specific enzymatic machinery, such as the 4S pathway associated with the dszABC genes, which are directly linked to sulfur removal and utilization as nutrient sources in the biodesulfurization process. In this study, bacteria were isolated from a bioreactor containing landfarm soil that had been periodically fed with petroleum for 12 years, using a medium containing dibenzothiophene (DBT), 4.6-dimethylbenzothiophene, 4-methylbenzothiophene, or benzothiophene. This study aimed to identify microorganisms capable of degrading PASC in such environments. Among the 20 colonies isolated from an inoculum containing DBT as the sole sulfur source, only four isolates exhibited amplification of the dszA gene in the dszABC operon. The production of 2-hydroxybiphenyl (HPB) and a decrease in DBT were detected during the growth curve and resting cell assays. The isolates were identified using 16S rRNA sequencing belonging to the genera Stutzerimonas and Pseudomonas. These isolates demonstrated significant potential for biodesulfurization and/or degradation of PASC. All isolates possessed the potential to be utilized in the biotechnological processes of biodesulfurization and degradation of recalcitrant PASC molecules.

Assuntos

RESUMO

Biocatalyst systems based on biofilms were developed to remove nitrogen and sulfur-containing heterocyclic hydrocarbons using Cobetia sp. strain MM1IDA2H-1 and Rhodococcus rhodochrous. The curli overproducers mutants CM1 and CM4 were derived from Cobetia sp. strain and used to build monostrain biofilms to remove quinoline; and together with R. rhodochrous to simultaneously remove quinoline and dibenzothiophene using mixed biofilms. The quinoline removal using biofilms were 96% and 97% using CM1 or CM4 curli overproducers respectively, whereas bacterial suspensions assays yielded 19% and 24% with the same strains. At the other hand, the simultaneous removal of quinoline and dibenzothiophene using mixed biofilms were respectively 50% and 58% using strains R. rhodochrous with CM1 and 75% and 50% using R. rhodochrous with CM4. Results show that biofilms were more efficient than bacterial suspension assays and that in mixed biofilms the shared surface area by two or more bacteria could affect the final yield.

RESUMO

This work describes the synthesis of catalysts based on red mud/polyethylene terephthalate (PET) composites and their subsequent heat treatment under N2 atmosphere. The materials were characterized by scanning electron microscopy (SEM), temperature programmed reduction (TPR), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric (TG) analysis and N2 adsorption/desorption. The catalysts were evaluated in the oxidative desulfurization reaction of dibenzothiophene (DBT) in a biphasic system. The results indicated that the PET impregnation on red mud increased the affinity of the catalyst with the nonpolar phase (fuel), in which the contaminant was dissolved, allowing a higher conversion (up to 80%) and selectivity to the corresponding dibenzothiophene sulfone. The sulfone compound is more polar than DBT and diffused into the polar solvent as indicated by the data obtained via gas chromatography-mass spectrometry (GC-MS).

Assuntos

RESUMO

Biodesulfurization is an eco-friendly technology applied in the removal of sulfur from fossil fuels. This technology is based on the use of microorganisms as biocatalysts to convert the recalcitrant sulfur compounds into others easily treatable, as sulfides. Despite it has been studied during the last decades, there are some unsolved questions, as per example the kinetic model which appropriately describes the biodesulfurization globally. In this work, different kinetic models were tested to a batch desulfurization process using dibenzothiophene (DBT) as a model compound, n-dodecane as organic solvent, and Rhodococcus erythropolis ATCC 4277 as biocatalyst. The models were solved by ODE45 function in the MATLAB. Monod model was capable to describe the biodesulfurization process predicting all experimental data with a very good fitting. The coefficients of determination achieved to organic phase concentrations of 20, 80, and 100 % (v/v) were 0.988, 0.995, and 0.990, respectively. R. erythropolis ATCC 4277 presented a good affinity with the substrate (DBT) since the coefficients of saturation obtained to reaction medium containing 20, 80, and 100 % (v/v) were 0.034, 0.07, and 0.116, respectively. This kinetic evaluation provides an improvement in the development of biodesulfurization technology because it showed that a simple model is capable to describe the throughout process.

Assuntos

RESUMO

Dibenzothiophene (DBT) and its oxidized derivative dibenzothiophene sulfone (DBTO2) are important representatives of polycyclic aromatic hydrocarbons (PAHs). Due to the importance of PAHs in oncogenesis and the lack of toxicological investigations related to DBT and DBTO2, this work proposes to assess their toxic and molecular effects caused by chronic treatment of Wistar rats. In parallel, their effects were compared to those caused by treatment with 1,2-dimethylhydrazine (DMH), a classic mutagenic agent. At the 14th day post-treatment, the animals were sacrificed and blood withdrawn for hematology and evaluation of liver and pancreatic functions. No significant alterations were observed. Nevertheless, histopathological analyses revealed dysplastic lesions in the intestines of animals treated with DBT and DBTO2. CD44 and carcinoembryonic antigen (CEA) staining demonstrated an approximately 3-fold increase in expression of both tissue markers for animals administered DBT, DBTO2, and DMH. A comparative two-dimensional gel analysis revealed additional 23 proteins exhibiting altered levels in the small intestines caused by exposure to DBT and DBTO2. At last, a protein-metabolite interaction map provided major insights into the metabolism of the dysplastic tissues. Our results provided strong evidence that DBT and its derivative could potentially act as cancer inducers, highlighting their toxicological and environmental relevance.

Assuntos

RESUMO

El principal inconveniente en la combustión de los hidrocarburos es la conversión del azufre y el nitrógeno a sus respectivos óxidos, los cuales participan en la formación de lluvia acida y deterioran el medio ambiente e infraestructuras. La remoción de azufre a partir de compuestos órgano-azufrados mediante el uso de microorganismos ha surgido como una alternativa frente al proceso catalítico de hidrodesulfurización (HDS). En el presente trabajo se evaluó la actividad desulfurizadora de veintitrés aislados nativos de Pseudomonas spp. sobre dibenzotiofeno (DBT), usando un sistema de fermentación con igual proporción de fase acuosa y orgánica (n-hexano) en presencia de oleato de etanolamina. Los aislados 02,05 y 06 conservaron su viabilidad en este medio y presentaron una remoción de azufre entre 6,0 y 9,4%, generando los metabolitos DBT-sulfona, DBT-sulfóxido, 2-hidroxibifenilo (2-HBP) y sulfato presentes en la ruta metabólica 4S. Con estos aislados se evaluó la actividad desulfurizadora sobre keroseno y se observó una remoción de azufre entre 19,9 y 62,6% y una disminución del poder calorífico entre 0,45 y 5,55%.

The main difficulty with fossil fuel combustión lies in sulphur and nitrogen becoming converted to their respective oxides, forming part of the acid rain which deteriorates the environment and infrastructure. Removing sulphur from organo-sulfur compounds by using micro-organisms has become an alternative to hydrodesulphurisation (HDS). Twenty-three Pseudomonas spp. native strains' desulphurisation activity on dibenzothiophene (DBT) was evaluated by using a fermentation system having equal proportions of aqueous and organic (n-hexane) phases in the presence of ethanolamine oléate. The 02, 05 and 06 strains maintained their viability in this médium, presenting 6,0% to 9,4% sulphur removal, producing DBT-sulphone, DBT-sulphoxide, 2-hydroxybiphenyl (2-HBP) metabolites and sulphate belonging to the 4S pathway. These native strains' desulphurisation activity was evaluated on kerosene, presenting 19,9% to 62,2% sulphur removal having 0,45% to 5,55% calorific power loss.

Assuntos