RESUMO

A busca por implantes dentários se tornou uma prática odontológica muito utilizada, no entanto, existem pacientes que não apresenta volume ósseo suficiente para receber o implante. A terapia a laser de baixa potência (LTBP) contém uma resposta relevante no desempenho dessas fases primárias da estabilidade da osseointegração. Dessa maneira, o estudo tem como objetivo analisar a eficiência e aplicação do LTBP em levantamento de seio maxilar dentro da implantodontia, ressaltando seus benefícios, limitações, importância e impacto para saúde bucal. Tratou-se de uma revisão narrativa de literatura, com seleção de artigos científicos encontrados nas bases de dados: PubMed, LILACS, BVS, SciELO e Google Acadêmico, sem período definido de publicação, com cruzamento dos Descritores em Ciências e Saúde (DeCS) e adotados os operadores booleanos "AND" e "OR". A quantidade ideal de altura óssea é importante para a reabilitação com implantes dentários e, em certos casos, o levantamento de seio maxilar se torna necessário expandir a altura de osso residual na maxila por meio da elevação da membrana de Schneider. Sendo assim, a literatura apresenta diversas formas para utilizar o LTBP na implantodontia, desde o início da limpeza na região que vai receber o implante até sua realização cirúrgica, a qual apresenta ótima melhoria na ação de osseointegração, amenizando desconfortos referentes ao pós-operatório e planejamento cirúrgico. Apesar de existir estudos controversos sobre a aplicação do LTBP no levantamento de seio maxilar para colocação de implantes, fica evidente que sua utilização obtém resultados efetivos no processo de cicatrização e reparação dos tecidos ósseos.

The search for dental implants has become a widely used dental practice; however, there are patients who do not have sufficient bone volume to receive the implant. Low-level laser therapy (LLLT) contains a relevant response in the performance of these primary phases of osseointegration stability. Thus, the study aims to analyze the efficiency and application of LLLT in maxillary sinus lifting within implantology, highlighting its benefits, limitations, importance, and impact on oral health. It was a narrative literature review, with the selection of scientific articles found in the databases: PubMed, LILACS, BVS, SciELO, and Google Scholar, without a defined publication period, with the crossing of the Health Sciences Descriptors (DeCS) and the adoption of the boolean operators "AND" and "OR." The ideal amount of bone height is important for rehabilitation with dental implants, and in certain cases, maxillary sinus lifting becomes necessary to expand the residual bone height in the maxilla through elevation of the Schneiderian membrane. Thus, the literature presents various ways to use LLLT in implantology, from the beginning of cleaning in the region that will receive the implant to its surgical implementation, which shows excellent improvement in osseointegration action, alleviating discomfort related to postoperative and surgical planning. Although there are controversial studies on the application of LLLT in maxillary sinus lifting for implant placement, it is evident that its use yields effective results in the healing and repair process of bone tissues.

RESUMO

BACKGROUND: The aim of this research was to analyse the current literature on displaced dental implants in the mandibular body, including local and systemic variables related to their cause, and to identify the most frequent location. METHODS: The study conducted a search of three databases (Pubmed, Scopus, and Web of Science) using specific index terms such as 'dental implant', 'displacement', 'dislocation', 'displaced', and 'mandible'. The analysis focused on the direction of displacement and the characteristics of the bone tissue (bone quality, density, and quantity) in cases where dental implants were displaced. RESULTS: A total of 371 articles were obtained. Thirteen of these articles were selected and read in full. To define bone quality, the Lekholm and Zarb classification, modified by Rosas et al., was used. The type II-B bone, which is characterized by thick cortical bone surrounding cancellous bone with extremely wide medullary spaces, presented the largest number of complications. Twenty-two cases were found in which the displacement direction was horizontal. Of these, four were displaced vestibularly, fourteen lingually, and four remained in the center. Additionally, 24 cases presented vertical displacement, with 12 displaced towards the inferior border of the mandible, 9 towards the middle or adjacent to the inferior dental nerve canal, and 3 above the inferior dental nerve canal. CONCLUSION: The accidental displacement of implants within the mandibular body is associated with various risk factors, including the characteristics of the bony trabeculum and the size of the medullary spaces. It is reasonable to suggest that only an adequate pre-surgical diagnostic evaluation, with the help of high-resolution tomographic images that allow a previous evaluation of these structures, will help to have better control over the other factors, thus minimizing the risk of displacement.

Assuntos

RESUMO

OBJECTIVES: The objective of this long-term retrospective study was to evaluate the fracture rate and the risk factors associated with the fracture of 3.3 mm narrow diameter implants (NDIs). MATERIALS AND METHODS: A total of 524 records of patients rehabilitated with 3.3 mm NDIs between 1997 and 2015 were assessed. Data on patients, implants, and prostheses were collected, and descriptive analysis of the variables was performed. NDIs were separated into 2 groups: "fractured" and "non-fractured", and a multilevel logistic regression model was applied to identify the risk factors associated with NDI fracture. RESULTS: Eighty-four patients were removed from the analysis for interrupting follow-up or presenting failures other than fractures. Of the 440 patients included (64.66 ± 13.4 years), 272 were females (61.8%), and 168 males (38.2%), and mean follow-up time was 129 ± 47.1 months. Of the 1428 NDIs, 15 (1.05%) in 9 patients (2.04%) fractured during the studied period. Ten fractures (66.66%) happened in 6 patients (66.66%) showing signs of parafunction. NDI with modified sandblasted, large grit, acid-etched surface was the only implant variable to show a protective statistical significance (p = .0439). CONCLUSIONS: NDI fracture was a rare event in the studied sample. NDIs manufactured with modified sandblasted, large grit, acid-etched surface may provide extra protection against NDI fracture. Patient-specific factors and implant characteristics should be carefully considered to limit the risk of fracture of 3.3 mm NDIs.

RESUMO

BACKGROUND: Peri-implantitis poses significant challenges in clinical practice, necessitating effective therapeutic strategies. This case report presents a comprehensive treatment approach for managing peri-implantitis, focusing on resective surgery, including implantoplasty and long-term maintenance. METHODS: We describe the case of a 50-year-old female patient with peri-implantitis affecting a maxillary full-arch implant-supported rehabilitation. The treatment strategy involved resective surgery with implantoplasty, a new maxillary overdenture, and a regular maintenance care schedule of three to four visits per year. Clinical and radiographic assessments were performed over a 10-year follow-up period. RESULTS: Post-treatment, all maxillary implants demonstrated no probing depths exceeding 4 mm, absence of bleeding on probing or suppuration, minimal plaque accumulation, and no further bone loss. Resective surgery with implantoplasty seems to have effectively provided submucosal decontamination and created a supra-mucosal implant surface conducive to oral hygiene. Despite regular maintenance, some mandibular implants exhibited bone loss during the follow-up period and were managed using the same approach as for the maxillary implants. CONCLUSIONS: The comprehensive treatment approach yielded favorable long-term clinical and radiographic outcomes, underscoring the effectiveness of the combined strategies in managing peri-implantitis. Nevertheless, the potential for recurrence or the development of peri-implantitis in new implants, even after a decade of successful treatment and strict maintenance, highlights the importance of ongoing, diligent care and regular evaluations to promptly diagnose and address these issues. KEY POINTS: Why is this case new information? The long-term effectiveness of peri-implantitis treatments, particularly involving implantoplasty, remains under-documented. This case provides insights from a 10-year follow-up on the efficacy of a comprehensive approach for managing peri-implantitis. Furthermore, these findings illustrate the potential for new peri-implantitis to develop, regardless of sustained peri-implant health and rigorous maintenance. This finding highlights the critical role of continuous monitoring for the early diagnosis and treatment of new implants exhibiting peri-implantitis. What are the keys to the successful management of this case? The success of this case hinged on a comprehensive treatment approach that combines surgical intervention associated with implantoplasty to remove implant threads, thereby creating smoother surfaces, less retentive for plaque accumulation. A critical aspect of this approach was also the redesign of prosthetic components to improve hygiene accessibility, continuous monitoring, and consistent maintenance care. What are the primary limitations to success in this case? The primary challenge in achieving success in this case was the prevention of new implants with peri-implantitis, despite the patient's consistent adherence to the maintenance program. Moreover, a critical evaluation of implant characteristics, particularly their susceptibility to mechanical failures, is paramount when performing implantoplasty. Furthermore, aligning patient expectations with the realistic esthetic and functional outcomes of the treatment is often challenging. PLAIN LANGUAGE SUMMARY: Peri-implantitis, an inflammatory disease affecting dental implants, is quite challenging to treat. This case report describes how a 50-year-old woman with this condition was successfully treated and maintained over 10 years. The approach included a surgical method called resective surgery, which involved reshaping the bone defect (osteoplasty) and smoothing the implant surface (implantoplasty). Additionally, she was fitted with a new upper denture and had regular follow-up visits three to four times a year. After ten years, her upper implants were stable with no signs of infection or further bone loss, and they were easy to keep clean. Some of her lower implants did experience inflammation with progressive bone loss during this time, but they were managed using the same surgical procedure as for her upper implants. This 10-year case report highlights positive and stable clinical results after resective surgery for treating peri-implantitis and the importance of an interdisciplinary approach and regular check-ups for maintenance, early diagnosis, and management of peri-implantitis over the long term.

RESUMO

A maxillary sinus lift was performed without bone grafting in a 23-year-old female patient who required the placement of a dental implant in the edentulous area of tooth 16. The clinical and tomographic evaluation made it possible to plan and perform the maxillary sinus lift using the transcrestal approach and without the need for bone grafting. The residual ridge of 6mm allowed the placement of a simultaneous dental implant. After 6 months of tomographic follow-up, before prosthetic loading, a vertical bone height of 8.83 mm was achieved, resulting in a vertical bone gain of 2.83 mm. Additionally, an adequate integration of the dental implant was observed without postoperative complications. Transcrestal sinus lift without the use of bone graft is shown to be a viable, safe and effective technique for the simultaneous placement of dental implants in patients with bone atrophy in the maxillary area. This technique offers advantages such as reduced surgical time, less morbidity, lower cost and a faster healing process compared to conventional methods.

RESUMO

The dental implant surface plays a crucial role in osseointegration. The topography and physicochemical properties will affect the cellular functions. In this research, four distinct titanium surfaces have been studied: machined acting (MACH), acid etched (AE), grit blasting (GBLAST), and a combination of grit blasting and subsequent acid etching (GBLAST + AE). Human amniotic mesenchymal (hAMSCs) and epithelial stem cells (hAECs) isolated from the amniotic membrane have attractive stem-cell properties. They were cultured on titanium surfaces to analyze their impact on biological behavior. The surface roughness, microhardness, wettability, and surface energy were analyzed using interferometric microscopy, Vickers indentation, and drop-sessile techniques. The GBLAST and GBLAST + AE surfaces showed higher roughness, reduced hydrophilicity, and lower surface energy with significant differences. Increased microhardness values for GBLAST and GBLAST + AE implants were attributed to surface compression. Cell viability was higher for hAMSCs, particularly on GBLAST and GBLAST + AE surfaces. Alkaline phosphatase activity enhanced in hAMSCs cultured on GBLAST and GBLAST + AE surfaces, while hAECs showed no mineralization signals. Osteogenic gene expression was upregulated in hAMSCs on GBLAST surfaces. Moreover, α2 and ß1 integrin expression enhanced in hAMSCs, suggesting a surface-integrin interaction. Consequently, hAMSCs would tend toward osteoblastic differentiation on grit-blasted surfaces conducive to osseointegration, a phenomenon not observed in hAECs.

Assuntos

RESUMO

Dental implant surface properties such as roughness, wettability, and porosity ensure cell interaction and tissue integration. The clinical performance of dental implants depends on the crystallographic texture and protein and cell bonds to the substrates, where grain size, orientation, and inclination are parameters responsible for favoring osteoblast adhesion and limiting bacterial adhesion. The lack of consensus on the best crystallographic plan for cell adhesion prompted this systematic review, which aims to answer the following question: "What is the influence of the crystallographic plane on titanium surfaces on cell adhesion?" by evaluating the literature on the crystallographic characteristics of titanium and how these dictate topographical parameters and influence the cell adhesion of devices made from this material. It followed the Preferred Reporting Standards for Systematic Reviews and Meta-Analyses (PRISMA 2020) registered with the Open Science Framework (OSF) (osf.io/xq6kv). The search strategy was based on the PICOS method. It chose in vitro articles that analyzed crystallographic structure correlated with cell adhesion and investigated the microstructure and its effects on cell culture, different crystal orientation distributions, and the influence of crystallinity. The search strategies were applied to the different electronic databases: PubMed, Scopus, Science Direct, Embase, and Google Scholar, and the articles found were attached to the Rayyan digital platform and assessed blindly. The Joanna Bringgs Institute (JBI) tool assessed the risk of bias. A total of 248 articles were found. After removing duplicates, 192 were analyzed by title and abstract. Of these, 18 were selected for detailed reading in their entirety, 9 of which met the eligibility criteria. The included studies presented a low risk of bias. The role of the crystallographic orientation of the exposed faces in a multicrystalline material is little discussed in the scientific literature and its impact is recognized as dictating the topographical characteristics of the material that facilitate cell adhesion.

Assuntos

RESUMO

OBJECTIVES: To evaluate the influence of multiplanar reconstruction thickness on the detection of peri-implant bone defects with a standalone zirconia implant and compare it to when another implant is in the vicinity using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Five dry human mandibles were used to create twenty implant sites in the second premolar and first molar regions. The OP300 Maxio was used to acquire CBCT images (90 kVp, 6.3 mA, 5 × 5 cm FOV, and 0.125 mm3 voxel size) before and after creating 3 mm peri-implant bone defects in the buccal aspect of the premolar region. Half of the scans featured a single zirconia implant in the premolar region, while the others had two implants in the premolar and molar regions. Three reconstruction thicknesses (0.125 mm, 1 mm, and 2 mm) were considered for the multiplanar reconstruction analyses. Five oral and maxillofacial radiologists assessed the detection of peri-implant bone defects using a 5-point scale. Diagnostic parameters were calculated and compared using Two-way ANOVA (α = .05). RESULTS: The studied factors showed no significant influence on the diagnosis of peri-implant bone defects (p > .05). Diagnostic performance was notably higher with a single implant, especially with a 2-mm reconstruction thickness (AUC = 0.88, sensitivity = 0.68, specificity = 0.94). Although the differences were not statistically significant, the results were more modest when two implants were present (AUC = 0.80, sensitivity = 0.58, specificity = 0.82). CONCLUSIONS: The presence of an adjacent zirconia implant and variations in reconstruction thickness did not influence the detection of 3 mm buccal peri-implant bone defects on CBCT images.

RESUMO

BACKGROUND: The aim of this case study is to present the rationality and scientific evidence of a new design for a double (DA) and triple (TA) dental abutment-implant with their specific new concept of biodynamic optimized peri-implant tissue (BOPiT). METHODS: The innovative design of these abutments with a paraboloid geometry was based on BOPiT, simultaneously involving the principles of mechanobiology, biotensegrity, and mechanotransduction. Thus, 37 consecutive individuals/43 cases rehabilitated with single dental implant using the innovative DA (n = 28) and TA (n = 15) on 43 implants were included in this case study. The DA and TA support 2 or 3 dental crowns on a single implant, respectively. Clinic and radiographic examinations were presented at T1 (loading after 4 months) and T2 [final examination with an average follow-up time of 7.2 years (>3 to 12 years)]. RESULTS: At T2, mean scores for plaque index, peri-implant bleeding on probing, and peri-implant probing depth were low, depicting healthy peri-implant conditions. All radiographic images showed insignificant annual marginal bone loss (0.022 ± 0.05 mm) when compared to T1, reflecting great bone stability. CONCLUSION: DA and TA, based on the BOPiT concept, represent an advantageous, simple and non-invasive mechanism for the longevity and healthy regulation of the peri-implant tissues.

RESUMO

This clinical report presents a technique to reconstruct extensively resected mandibles using a combination of autologous bone grafts and additive manufacturing techniques. Mandibular defects, often arising from trauma, tumors, or congenital anomalies, can severely impact both function and aesthetics. Conventional reconstruction methods have their limitations, often resulting in suboptimal outcomes. In these reports, we detail clinical cases where patients with different mandibular defects underwent reconstructive surgery. In each instance, autologous grafts were harvested to ensure the restoration of native bone tissue, while advanced virtual planning techniques were employed for precise graft design and dental implant placement. The patients experienced substantial improvements in masticatory function, speech, and facial aesthetics. Utilizing autologous grafts minimized the risk of rejection and complications associated with foreign materials. The integration of virtual planning precision allowed customized solutions, reducing surgical duration and optimizing implant positioning. These 2 cases underscores the potential of combining autologous grafts with virtual planning precision and dental implants produced by additive manufacturing for mandible reconstruction.

RESUMO

The objective of this study was to evaluate microbial leakage by means of genome counts, through the implant-abutment interface in dental implants with different Morse taper abutments. Fifty-six samples were prepared and divided in four groups: CMC TB (14 Cylindrical Implants-14 TiBase Abutments), CMX TB (14 Conical Implants-14 TiBase Abutments), CMX PU (14 Conical Implants-14 Universal Abutment) and CMX U (14 Tapered Implants-14 UCLA Abutments). Assemblies had their interface submerged in saliva as the contaminant. Samples were subjected either to thermomechanical cycling (2 × 106 mechanical cycles with frequency of 5 Hz and load of 120 N simultaneously with thermal cycles of 5-55 °C) or thermal cycling (5-55 °C). After cycling, the contents from the inner parts of assemblies were collected and analyzed using the Checkerboard DNA-DNA hybridization technique. Significant differences in the total genome counts were found after both thermomechanical or thermal cycling: CMX U > CMX PU > CMX TB > CMC TB. There were also significant differences in individual bacterial counts in each of the groups (p < 0.05). Irrespective of mechanical cycling, the type of abutment seems to influence not only the total microbial leakage through the interface, but also seems to significantly reflect differences considering individual target species.

RESUMO

Papillon-Lefèvre syndrome (PLS) is a rare benign, autosomal recessive condition caused by a mutation in the cathepsin C gene. This alteration results in palmar-plantar hyperkeratosis, or thickening of the soles of the feet and palms of the hands, as well as aggressive periodontal disease resulting in the premature loss of deciduous and permanent teeth. The etiology is multifactorial, and is influenced by immunological, genetic or microbial factors. This case report presents a successful prosthetics oral rehabilitation with osseointegrated implants in a 48-year-old female patient with PLS. Although few reports of dental implants in patients with PLS have been published, it seems to be a possible approach in selected patients. (AU)

Assuntos

RESUMO

Purpose: The aim of this study was to evaluate image artifacts in the vicinity of dental implants in cone-beam computed tomography (CBCT) scans obtained with different spatial orientations, tube current levels, and metal artifact reduction algorithm (MAR) conditions. Materials and Methods: One dental implant and 2 tubes filled with a radiopaque solution were placed in the posterior region of a mandible using a surgical guide to ensure parallel alignment. CBCT scans were acquired with the mandible in 2 spatial orientations in relation to the X-ray projection plane (standard and modified) at 3 tube current levels: 5, 8, and 11 mA. CBCT scans were repeated without the implant and were reconstructed with and without MAR. The mean voxel and noise values of each tube were obtained and compared using multi-way analysis of variance and the Tukey test (α=0.05). Results: Mean voxel values were significantly higher and noise values were significantly lower in the modified orientation than in the standard orientation (P<0.05). MAR activation and tube current levels did not show significant differences in most cases of the modified spatial orientation and in the absence of the dental implant (P>0.05). Conclusion: Modifying the spatial orientation of the head increased brightness and reduced spatial orientation noise in adjacent regions of a dental implant, with no influence from the tube current level and MAR.

RESUMO

(1) Objective: The aim of this study was to assess the biological behavior of bone tissue on a machined surface (MS) and modifications made by a laser beam (LS) and by a laser beam incorporated with hydroxyapatite (HA) using a biomimetic method without thermic treatment (LHS). (2) Methods: Scanning electron microscopy coupled with energy-dispersive X-ray spectrometry (SEM/EDX) was performed before and after installation in the rabbit tibiae. A total of 20 Albinus rabbits randomly received 30 implants of 3.75 × 10 mm in the right and left tibias, with two implants on each surface in each tibia. In the animals belonging to the 4-week euthanasia period group, intramuscular application of the fluorochromes calcein and alizarin was performed. In implants placed mesially in the tibiofemoral joint, biomechanical analysis was performed by means of a removal torque (N/cm). The tibias with the implants located distally to the joint were submitted for analysis by confocal laser microscopy (mineral apposition rate) and for histometric analysis by bone contact implant (%BIC) and newly formed bone area (%NBA). (3) Results: The SEM showed differences between the surfaces. The biomechanical analysis revealed significant differences in removal torque values between the MSs and LHSs over a 2-week period. Over a 4-week period, both the LSs and LHSs demonstrated removal torque values statistically higher than the MSs. BIC of the LHS implants were statistically superior to MS at the 2-week period and LHS and LS surfaces were statistically superior to MS at the 4-week period. Statistical analysis of the NBA of the implants showed difference between the LHS and MS in the period of 2 weeks. (4) Conclusions: The modifications of the LSs and LHSs provided important physicochemical modifications that favored the deposition of bone tissue on the surface of the implants.

RESUMO

PURPOSE: The aim of this study is to delineate the safety zone concerning the anteriorization of the AL and correlate it with the behavior of the AL, analyzing its feasibility. METHODS: Adhering to the Joanna Briggs Institute (JBI) manual guidelines, both the protocol and this review were conducted based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses Extension for Scoping Reviews (PRISMA-ScR) checklist. MeSH terms, combined with free terms, were utilized to search for articles in the following databases: Embase, LILACS, LIVIVO, PubMed/MEDLINE, Scopus, Web of Science, and grey literature. RESULTS: Fifteen articles were select following the eligibility criteria. An average safe zone of 4.75 mm in humans was observed, with a prevalence 60.8% and average anterior length of the AL of 2.09 mm in humans. CONCLUSION: The AL has varied patterns across different populations, then, it could not be asserted a 100% safe zone. Preoperative analysis of the AL with CBCT is always necessary. While it could be stated that a safe zone should be employed as an inviolable region, stipulated measures of a safe zone should be regarded as an area of greater attention in preoperative planning.

Assuntos

RESUMO

The purpose of the present study was to evaluate the Morse effect of different internal tapered implant-abutment connections (ITCs) using a pullout test. Implants with different ITCs were selected: Short (Bicon, USA), G1; Novo Colosso (Medens, Brazil), G2; Epkut (SIN, Brazil), G3; Strong SW (SIN, Brazil), G4; Flash (Conexão, Brazil), G5 and Bone Level (Straumann, Switzerland), G6. The respective computer-aided design (CAD) files were loaded into the analysis software to measure each ITC's taper angle and implant-abutment contact area. Six implants from each group were embedded in acrylic resin blocks, and the respective universal abutments were fixed using a mallet (G1) or by applying 20 Ncm of torque (G2 to G6). After 10 minutes, each abutment's retention screw was removed, and the force necessary for abutment rupture was recorded using a universal testing machine at a crosshead speed of 0.5 mm/min. The groups were compared using a one-way analysis of variance and Tukey's test. Spearman's correlation was used to check the correlation of the taper angle and contacting area with the pullout strength. G1, a no-screw abutment with a 3° taper, and G2, a 10° tapered abutment tightened by 20 Ncm, presented the highest pullout strength (P < .05). The increased taper angle of G4, compared to G3, reduced the Morse effect despite their similar implant-abutment contacting areas (P < .05). The G5 and G6 abutments loosened after screw removal and did not exhibit pullout resistance. The closer the tapered angle (r = -.958) and the higher the implant-abutment contact area (r = .880), the higher the pullout strength (P < .001). Within the limits of this study, the Morse effect is different among tapered implant-abutment connections. The closer the tapered angle and the higher the interface area, the higher the Morse effect between the abutment and the implant.

Assuntos

RESUMO

OBJECTIVE: To describe the clinical and radiographic performance and survival rate of a new two-piece ceramic implant system after at least 12 months of follow-up. MATERIALS AND METHODS: Sixty-five implants were placed and followed up for at least 12 months (12.3 ± 1.5), in 50 patients. The implants were installed both in fresh extraction sockets and in healed sites and received provisional restoration when the clinical insertion torque was greater than 35Ncm. The primary results describe the survival rate of these implants. Clinical performance was evaluated through the evaluation of the Pink Esthetic Score (PES) and the degree of satisfaction of the patients. Bone loss was measured through radiographic measurements of the marginal bone loss in the mesial (MBLM) and distal (MBLD) sites. RESULTS: The survival rate was 98.5%. The average MBLM was 0.24 mm (± 0.53) and the MBLD was 0.27 mm (± 0.57). A statistical difference was observed only when comparing immediate implants with delayed ones (MBLM - p = 0.046 and MBLD - p = 0.028) and when they received immediate provisionalization or not (MBLM - p = 0.009 and MBLD - p = 0.040). The PES before the intervention (T0) was 13.4 (± 0.8) and the PES at T2 (12-month follow-up) was 12.9 (± 1.5) (p = 1.14). CONCLUSION: The new two-piece ceramic implant used in the present study showed predictable and reliable results, similar to those found with titanium implants after one year of follow-up. CLINICAL RELEVANCE: These implants can be used as an alternative to titanium implants in terms of the marginal bone loss and the degree of patient satisfaction.

Assuntos

RESUMO

AIM: This study evaluated the impact of the partial exposition of the nonabsorbable membrane (dPTFE) on microbial colonization during bone healing. MATERIALS AND METHODS: Patients indicated for tooth extraction were randomized to dPTFE group (n = 22) - tooth extraction and alveolar ridge preservation (ARP) using an intentionally exposed dPTFE membrane and USH group (n = 22) - tooth extraction and unassisted socket healing. Biofilm samples were collected at the barrier in the dPTFE and on the natural healing site in the USH after 3 and 28 days. Samples from the inner surface of the dPTFE barrier were also collected (n = 13). The microbiome was evaluated using the Illumina MiSeq system. RESULTS: Beta diversity was different from 3 to 28 days in both groups, and at 28 days, different microbial communities were identified between therapies. The dPTFE was characterized by a higher prevalence and abundance of gram-negative and anaerobic species than USH. Furthermore, the inner surface of the dPTFE membrane was colonized by a different community than the one observed on the outer surface. CONCLUSION: Intentionally exposed dPTFE membrane modulates microbial colonization in the ARP site, creating a more homogeneous and anaerobic community on the inner and outer surfaces of the membrane. CLINICAL RELEVANCE: DPTFE promoted faster biofilm colonization and enrichment of gram-negative and anaerobes close to the regenerated site in the membrane's inner and outer surfaces. dPTFE membrane can be used exposed to the oral site, but approaches for biofilm control should still be considered. The study was retrospectively registered at Clinicaltrials.gov (NCT04329351).

Assuntos

RESUMO

OBJECTIVES: To evaluate the potential of laser-microtextured abutments (LMAs) compared to machined abutments (MAs) in peri-implant clinical and radiographic outcomes. MATERIALS AND METHODS: Eligible studies consisted of randomized clinical trials (RCTs) retrieved from MEDLINE, Web of Science, Scopus, and Embase databases. The study adhered to the PRISMA statement, and the protocol was registered at the PROSPERO (registration number CRD42023443112). The risk of bias was evaluated according to version 2 of the Cochrane risk of bias tool (RoB 2). Meta-analyses were performed using random effect models. Afterward, the GRADE approach was used to determine the certainty of evidence. RESULTS: Four RCTs were included from a total of 2,876 studies. LMAs had lower peri-implant sulcus depth at 6-8 weeks (WMD: -0.69 mm; 95% CI: -0.97, -0.40; p = 0.15, I2 = 53%) and at one year (WMD: -0.75 mm; 95% CI: -1.41, -0.09; p = 0.09, I2 = 65%), but the certainty of evidence was low. In addition, the marginal bone loss favored the LMAs group (WMD: -0.29 mm; 95% CI: -0.36, -0.21; p = 0.69, I2 = 0%) with moderate evidence. There were fewer sites with bleeding on probing in the LMAs group (WMD: -1.10; 95% CI: -1.43, -0.77; p = 0.88, i2 = 0%). There was no statistical difference between groups for the modified gingival index and modified plaque index. Furthermore, all studies were classified as having some concerns risk of bias. CONCLUSIONS: There was low to moderate certainty evidence that LMAs can favor peri-implant clinical and radiographic parameters compared to MAs. CLINICAL RELEVANCE: Laser-microtextured abutments may benefit peri-implant clinical and radiographic outcomes.

Assuntos

RESUMO

RESUMEN Objetivo: Realizar una revisión de la literatura sobre el resultado de las sobredentaduras maxilares según el número de implantes dentales en pacientes edéntulos totales. Materiales y Métodos: Se realizó una búsqueda bibliográfica sistematizada en los motores de búsqueda Pubmed, Scopus y Web of Science y luego de establecer los criterios y filtros de la misma, se utilizaron 6 artículos. De los 6 artículos analizados, 4 fueron estudios de tipo ensayo clínico aleatorizado, 1 estudio prospectivo y 1 estudio retrospectivo. Resultados: Los resultados clínicos de las sobredentaduras maxilares, basados en el número de implantes sobre los cuales fueron soportadas, y comparando los protocolos más difundidos e investigados como los de All-on-4 y All-on-6, fueron similares. Se consideran óptimos, confiables, exitosos y longevos, sin diferencia significativa según el número de implantes dentales colocados. Conclusiones: Las sobredentaduras maxilares soportadas por 4 o 6 implantes fueron técnicas de tratamiento confiables, y ofrecen resultados comparables. Las complicaciones fueron limitadas y los resultados óptimos y duraderos.

ABSTRACT Objective: To review the literature on the outcome of maxillary overdentures according to the number of dental implants in edentulous patients. Materials and Methods: A systematic bibliographic search was carried out in the Pubmed, Scopus and Web of Science search engines and, after appliying the criteria and filters, 6 articles were used. Of the 6 articles analyzed, 4 were randomized clinical trial type studies, 1 prospective study and 1 retrospective study. Results: The results of maxillary overdentures, according to the number of implants used to support them, and comparing the most widespread and researched protocols such as All-on-4 and All-on-6, were similar. They are considered optimal, reliable, successful and long-lived, with no significant difference within the number of dental implants placed. Conclusions: Maxillary overdentures supported by 4 or 6 implants were reliable, and exhibit comparable results. The complications were limited, and the results were optimal and enduring.

Assuntos